Data-Centric Approach to Digital Twin Modeling of Production Lines

Digital twin(DT) is a virtual replica of a physical world that has become one of the most important ideas in the manufacturing industry’s digital revolution. DT modeling is a vital issue in building a DT of a production line. In this paper, a method is proposed to address the difficulties of complicated production line business and data heterogeneity. The method focuses on essential data in the production line and creates conceptual and information models based on the ArtiFlow model and AutomationML(AML). Conceptual models are mainly used to describe and analyze the business activities of the production line, and information models describe real production lines in the form of XML files. The proposed modeling approach has been applied to a real-world clothing production line to demonstrate its feasibility and effectiveness.

Installation and Debugging of Auto-control System in Fruit Wine Production Line

[Objective] The aim was to test the controlling effect of cleaning steriliza- tion system, material conveying system, and fermentation jar cooling system with equip- ments of fruit wine production line introduced in this study and its auto-control sys- tem field assembled and debugged. [Method] Based on controlling equipment and setting parameters on the configuration interface, the operation state of the control equipments could be real-time monitored and controlled with the help of configura- tion software. [Result] The result showed that the equipment system could reduce the temperature into 12 ℃ with the error of ＋0.5 ℃within 110 minutes when the fermentation temperature is set at 12 ℃ in real production. [Conclusion] The auto- control system of fruit wine production line was easy to be assembled and de- bugged to meet demands of different fruit wine productions.

Comparison of Efficiencies of Two Production Lines with Buffering Capacities at Common and Separative Allocation

In this paper, the efficiencies of two production lines, one is with commonly, the other is with separately buffer capacities are compared, the result is that the former one is better than the latter

Multi-objective reconfigurable production line scheduling for smart home appliances

In a typical discrete manufacturing process,a new type of reconfigurable production line is introduced,which aims to help small-and mid-size enterprises to improve machine utilization and reduce production cost.In order to effectively handle the production scheduling problem for the manufacturing system,an improved multi-objective particle swarm optimization algorithm based on Brownian motion(MOPSO-BM)is proposed.Since the existing MOPSO algorithms are easily stuck in the local optimum,the global search ability of the proposed method is enhanced based on the random motion mechanism of the BM.To further strengthen the global search capacity,a strategy of fitting the inertia weight with the piecewise Gaussian cumulative distribution function(GCDF)is included,which helps to maintain an excellent convergence rate of the algorithm.Based on the commonly used indicators generational distance(GD)and hypervolume(HV),we compare the MOPSO-BM with several other latest algorithms on the benchmark functions,and it shows a better overall performance.Furthermore,for a real reconfigurable production line of smart home appliances,three algorithms,namely non-dominated sorting genetic algorithm-II(NSGA-II),decomposition-based MOPSO(dMOPSO)and MOPSO-BM,are applied to tackle the scheduling problem.It is demonstrated that MOPSO-BM outperforms the others in terms of convergence rate and quality of solutions.

RECONFIGURABLE PRODUCTION LINE MODELING AND SCHEDULING USING PETRI NETS AND GENETIC ALGORITHM

In response to the production capacity and functionality variations, a genetic algorithm （GA） embedded with deterministic timed Petri nets（DTPN） for reconfigurable production line（RPL） is proposed to solve its scheduling problem. The basic DTPN modules are presented to model the corresponding variable structures in RPL, and then the scheduling model of the whole RPL is constructed. And in the scheduling algorithm, firing sequences of the Petri nets model are used as chromosomes, thus the selection, crossover, and mutation operator do not deal with the elements in the problem space, but the elements of Petri nets model. Accordingly, all the algorithms for GA operations embedded with Petri nets model are proposed. Moreover, the new weighted single-objective optimization based on reconfiguration cost and E/T is used. The results of a DC motor RPL scheduling suggest that the presented DTPN-GA scheduling algorithm has a significant impact on RPL scheduling, and provide obvious improvements over the conventional scheduling method in practice that meets duedate, minimizes reconfiguration cost, and enhances cost effectivity.

Minimizing Makespan on Mixed Mass Production Lines of Two and Three Machines

The objective of the research discussed in this paper has been to find an optimal schedule on mixed mass production lines of two and three machines. Johnson's rule on flow shops is generalized to mixed mass production lines. Scheduling methods on three-machine lines are proposed for six special kinds of data of processing times of jobs. The scheduling method on two-machine lines is also proposed.

Constructing the Virtual Production Line

In order to study the constructing technology of virtual production line, the structure model of virtual production line was presented, and the object oriented technique was used to establish its basic classes and relevant models, including solid model, behavior model and object oriented Petri net based control model, and based on this, the constructing of virtual production line was realized. The application proved that the virtual production line had many good characteristics, such as visualization, interaction, multi layer and reusability, and it's an efficient tool of analyzing and modeling for layout planning and rapidly reconfiguring of production line.

Improved Algebraic Model for Serial Production Lines with Limited Buffer Sizes

The ordered event model is improved to describe serial production lines with limited buffer sizes. The improved model hasthe same computational burden as the original one and can be constrUcted directly according to given principles. Several simulationexamples are cited to verify this improved model. Extensions and open problems are also indicated. By means of this new model, serialProduotion lines with limitations of resources can be stUdied analytically.

Generalized CAPP and synthetic evaluation strategy for production line of accuracy welding

This paper presents generalized CAPP （G-CAPP） method which deals with macro process planning for multiobjective in the planning stage of production line of accuracy welding （PLAW） based on the features of accuracy welding production （ AWP ）. G-CAPP offers foundations for prototype design and general equipment sorting, production capacity predication and production analysis by means of simulation and optimization. A synthetic hierarchy evaluation （SHE） model for G-CAPP established according to the planning objective is utilized to estimate the alternate processing plans by using membership function and analytic hierarchy process （AHP） of operational theory. The assembly welding line of hydraulic torque converter （HTC） is as an example of typical A WP to explicate G-CAPP and synthetic evaluating strategy of PLAW. The feasible and rational process configuration strategies of HTC assembly welding line are pointed oat under different planning objective.

Continental AG＇s turbocharger production line completed in Shanghai, China

Continental AG completed the turbocharger production line in Jiading district, Shanghai, China, which is the first turbocharger production line of the Group outside Europe. Shanghai plant now, with about 1,600 employees, has a number of production lines including ABS system.

Multi-objectives and Simulation Models for Develop Production Line in Automobiles Manufacturing System

Automotive manufacturing is complex and includes the coordination of design in the manufacturing system. The manufacturing approaches over the past few years, disassembly have been a key issue, and it seems that simulation models are usually tailored to address a narrow set of industrial issues. This paper describes the development of the production line in the automobile manufacturing system through design, operation, and maintenance, based on multi-objectives of Algorithm and Simulation Model called MOA-SM. The both models are being developed at three different levels： the production line in the body and assembly shop, supply chain, and the production plan. The optimization tries to involve more objectives to solve the issues in manufacturing system. A solution that may optimize one performance measure may deteriorate since other performance solutions are difficult. The resulting algorithms are comparable to the simulation and multi-object in terms of success rate, assembly times, peak forces, moments, and have assembly times superior to those of a benchmark blind search algorithm.

Two semi-solid die-casting production lines of Xuzhou Die- casting Technology Co., Ltd. officially put into operation

The two production lines for the first phase of the semi-solid die-casting high-end parts project were put into production in this October, and can monthly produce more than 30 thousand die casting parts.

Layout and Simulation Design of Intelligent Manufacturing Production Line via Visualone

NC machining of parts and components is developing in the direction of automation and intelligence.In addition,the automatic production line puts forward higher requirements for the overall layout,technological process and production tempo.The layout and simulation of the production line can more directly reflect the problems that may occur in the operation of the production line,and solve these problems through scientific methods.This project uses VisualOne software to simulate the operation of the intelligent manufacturing production line,which can directly find the existing problems in the layout of the production line and the process of the craftsmen,and optimize the layout of the production line.In addition,it can provide reliable support for the equipment procurement and on-site construction of the intelligent manufacturing automation production line in the later stage.

Training for smart manufacturing using a mobile robot-based production line

Practice experimentation that integrates the manufacturing processes and cutting-edge technologies of smart manufacturing (SM) is essential for future academic and applied engineering personnel. The broadening efficacy of hands-on experience in SM engineering education has been manifested. In this regard, a reference practical system is proposed in this study for hands-on training in SM crucial advancements. The system constructs a mobile robot-based production line (MRPL) to increase participants’ interest in theoretical learning and professional skills. The MRPL-based reference system includes the comprehensive principles and processes involved in modern SM factories from warehousing to logistics, processing, and testing. With key features of modularity, integrability, customizability, and open architecture, this system has a threefold objective. First, it is an interdisciplinary subject that enables students to translate classroom learning into authentic practices, thus facilitating knowledge synthesis and training involvements. Second, it offers effective support to cultivate the attributions and behavioral competencies of SM talents, such as perseverance, adaptability, and cooperation. Third, it promotes students’ capacities for critical thinking and problem solving so that they can deal with the difficulties that physical systems have and motivates them to pursue careers with new syllabi, functions, and process techno-logies. The received positive evaluations and assessments confirm that this MRPL-based reference system is beneficial for modern SM talent training in higher engineering education.

Production line 3D visualization monitoring system design based on OpenGL

New production line management technologiesare required and adopted recently with the development ofmodern manufacturing industry. In this study, a productionline three-dimensional （3D） visualization monitoring sys-tem based on OpenGL modeling, open database connec-tivity （ODBC）, and database management technology isestablished on a VC＋＋6.0 platform to satisfy effectiveproduction. A client/server model is adopted in the system,and data on processing information, interactive operation,and failure process are stored in the server side database. Aclient reads the workpiece process information from theserver, and the machining process of every workpiece isvisually represented in the form of 3D visualization. Pro-duction line 3D visualization provides production capacitysimulation to optimize the parameter settings. Whencompared with the analysis results of production linecapacity, the key parameters possess the same optimalvalues, and this proves the accuracy of production line 3Dvisualization monitoring system. The system provideseffective data support for production line monitoring andmanagement in enterprises.

Virtual simulation of production line for ergonomics evaluation

To avoid ergonomic problems in the early planning stages of a production line and achieve more satisfactory planning and design, ergonomic simulation is particularly important in digital production line planning. An ergonomics analysis method is presented by using two theories： Ovako working posture analysis system （OWAS） and Burandt-Schultetus hand-arm force analysis （BSHA）. The processes of ergonomics analysis and simulation are discussed based on a platform of process simulation and process designer. As an example, the paper shows how ergonomics problems are considered in production line planning to make a better choice between different production line planning schemes.

GRAPHICAL-BASED RELIABILITY EVALUATION OF MULTIPLE DISTINCT PRODUCTION LINES

This paper proposes a graphical-based methodology to evaluate the performance of a manufacturing system in terms of network model.We focus on a manufacturing system which consists of multiple distinct production lines.A transformation technique is developed to build the manufacturing system as a manufacturing network.In such a manufacturing network,the capacity of each machine is multistate due to failure,partial failure,or maintenance.Thus,this manufacturing network is also regarded as a multistate network.We evaluate the probability that the manufacturing network can meet a given demand,where the probability is referred to as the system reliability.A simple algorithm integrating decomposition technique is proposed to generate the minimal capacity vectors that machines should provide to eventually satisfy demand.The system reliability is derived in terms of such capacity vectors afterwards.A practical application in the context of IC card manufacturing system is utilized to demonstrate the performance evaluation procedure.

A Model Combining Discrete Event System Simulation and Genetic Algorithm for Buffer Allocation in Unreliable Large Production Lines

To solve the difficulties in allocating buffers for unreliable large production lines, this paper inves-tigated a model combining the genetic algorithm with the discrete event system simulation method. In the simulation method, times-to-failure of an unreliable large production line is assumed to follow exponential distribution, whereas times-to-repair and times-to-processing are set to follow an Erlang-k distribution. Using a genetic algorithm based on special position-based mapping means and elitist protection strategy, the buffer configuration of an auto-body welding line is optimized. The simulation of the optimized configuration shows that the performance of the production line, such as productivity and the main average utilization of the workstations, is much improved. This model can optimize the allocation of buffers for unreliable large production lines effectively.

Layout design of a mixed-flow production line based on processing energy consumption and buffer configuration

Green manufacturing is a growing trend,and an effective layout design method for production lines can reduce resource wastage in processing.This study focuses on existing problems such as low equipment utilization,long standby time,and low logistics efficiency in a mixed-flow parallel production line.To reduce the energy consumption,a novel method considering an independent buffer configuration and idle energy consumption analysis is proposed for this production line’s layout design.A logistics intensity model and a machine tool availability model are established to investigate the influences of independent buffer area configuration on the logistics intensity and machine tool availability.To solve the coupling problem between machine tools in such production lines,a decoupling strategy for the relationship between machine tool processing rates is explored.An energy consumption model for the machine tools,based on an optimized configuration of independent buffers,is proposed.This model can effectively reduce the idle energy consumption of the machine tools while designing the workshop layout.Subsequently,considering the problems encountered in workshop production,a comprehensive optimization model for the mixed-flow production line is developed.To verify the effectiveness of the mathematical model,it is applied to an aviation cabin production line.The results indicate that it can effectively solve the layout problem of mixed-flow parallel production lines and reduce the idle energy consumption of machine tools during production.The proposed buffer configuration and layout design method can serve as a theoretical and practical reference for the layout design of mixed-flow parallel production lines.