Planetary Gear Profile Modification Design Based on Load Sharing Modelling

In order to satisfy the increasing demand on high performance planetary transmissions, an important line of research is focused on the understanding of some of the underlying phenomena involved in this mechanical system. Through the development of models capable of reproduce the system behavior, research in this area contributes to improve gear transmission insight, helping developing better maintenance practices and more efficient design processes. A planetary gear model used for the design of profile modifications ratio based on the levelling of the load sharing ratio is presented. The gear profile geometry definition, following a vectorial approach that mimics the real cutting process of gears, is thoroughly described. Teeth undercutting and hypotrochoid definition are implicitly considered, and a procedure for the incorporation of a rounding arc at the tooth tip in order to deal with corner contacts is described. A procedure for the modeling of profile deviations is presented, which can be used for the introduction of both manufacturing errors and designed profile modifications. An easy and flexible implementation of the profile deviation within the planetary model is accomplished based on the geometric overlapping. The contact force calculation and dynamic implementation used in the model are also introduced, and parameters from a real transmission for agricultural applications are presented for the application example. A set of reliefs is designed based on the levelling of the load sharing ratio for the example transmission, and finally some other important dynamic factors of the transmission are analyzed to assess the changes in the dynamic behavior with respect to the non-modified case. Thus, the main innovative aspect of the proposed planetary transmission model is the capacity of providing a simulated load sharing ratio which serves as design variable for the calculation of the tooth profile modifications.

Effects of Shear Fracture on In-depth Profile Modification of Weak Gels

Two sand packs were filled with fine glass beads and quartz sand respectively. The characteristics of crosslinked polymer flowing through the sand packs as well as the influence of shear fracture of porous media on the indepth profile modification of the weak gel generated from the crosslinked polymer were investigated. The results indicated that under the dynamic condition crosslinking reaction happened in both sand packs, and the weak gels in these two cases became small gel particles after water flooding. The differences were： the dynamic gelation time in the quartz sand pack was longer than that in the glass bead pack. Residual resistance factor （FRR） caused by the weak gel in the quartz sand pack was smaller than that in the glass bead pack. The weak gel became gel particles after being scoured by subsequent flood water. A weak gel with uniform apparent viscosity and sealing characteristics was generated in every part of the glass bead pack, which could not only move deeply into the sand pack but also seal the high capacity channels again when it reached the deep part. The weak gel performed in-depth profile modification in the glass bead pack, while in the quartz sand pack, the weak gel was concentrated with 100 cm from the entrance of the sand pack. When propelled by the subsequent flood water, the weak gel could move towards the deep part of the sand pack but then became tiny gel particles and could not effectively seal the high capacity channels there. The in-depth profile modification of the weak gel was very weak in the quartz sand pack. It was the shear fracture of porous media that mainly affected the properties and weakened the in-depth profile modification of the weak gel.

TRIGONOMETRIC CURVE MODIFICATION OF SCROLL PROFILE AND ITS EFFECT ON PERFORMANCES OF A SCROLL COMPRESSOR

A modification of central profile with trigonometric curve is proposed based on the theory of engagement of scroll compressor. General modification equations for central profile of a pair of scrolls are given and various modification patterns are discussed. The equidistant method is employed to calculate the volume of a sealed chamber and a set of general equations is represented. Modification parameters affecting geometric and dynamic property of a scroll compressor are analyzed systematically, and the relations between them are accurately determined. The condition for transforming a trigonometric curve modification into an arc-curve modification is explained. The conclusions can also be applied to other scroll fluid machines.

Investigation of a Design Modification for Double Helical Gears Reducing Vibration and Noise

To reduce vibration and noise and increase transmission efficiency, a three segment method for modifying the pinion profile was proposed. Cutter surface equations were deduced by changing the shape of the cutter-edge, substituting three segment parabolas for the line. The influence of longitudinal tooth modifications on tooth surface load distributions was discussed. Transmission error minimization and uniformity of tooth surface load distribution were chosen as optimization goals and the modified parameters were obtained by applying the complex method. Finally, an experiment comparing the loaded transmission error, vibration, and noise both before and after modifications was carried out. The results indicate that the modified design is reliable.

Study of action mechanisms and properties of Cr^(3+) cross-linked polymer solution with high salinity

Performance characteristics of partially hydrolyzed polyacrylamide （HPAM） and cross- linked polymer （CLP, Cr^3＋ as the cross linker） solutions have been investigated. A Brookfield viscometer, rheometer, dynamic light scattering system, and core flow device have been used to measure the viscosity, viscoelasticity, polymer coil dimensions, molecular configuration, flow characteristics, and profile modification. The results show that, under conditions of high salinity and low HPAM and Cr^3＋ concentrations, cross-linking mainly occurred between different chains of the same HPAM molecule in the presence of Cr^3＋, and a cross-linked polymer （CLP） system with a local network structure was formed. Compared with an HPAM solution of the same concentration, the apparent viscosity of the CLP solution increased slightly or remained almost unchanged, but its viscoelasticity （namely storage modulus, loss modulus, and first normal stress difference） increased, and the resistance coefficient and residual resistance coefficient increased significantly. This indicates that the CLP solution exhibits a strong capability to divert the sequentially injected polymer flood from high-permeability zones to low- permeability zones in a reservoir. Under the same HPAM concentration conditions, the dimensions of polymer coils in the CLP solution increased slightly compared with the dimensions of polymer coils in HPAM solution, which were smaller than the rock pores, indicating that the cross-linked polymer solution was well adapted to reservoir rocks. Core flood experiments show that at the same cost of reagent, the oil recovery by CLP injection （HPAM-1, Cr^3＋ as the cross linker） is 3.1% to 5.2% higher than that by HPAM- 2 injection.

Preparation of cationic polyacrylamide microsphere emulsion and its performance for permeability reduction

In this paper, cationic polyacrylamide microspheres （CPAM） were synthesized using acrylamide （AM） and methacryloyloxyethyl trimethyl ammonium chloride （TMAEMC） as monomers, ammonium sulfate as dispersant, poly（acryloyloxyethyl trimethyl ammonium chloride） （PAETAC） as dispersion stabilizer, and ammonium persulfate as initiator. The synthetic method was dispersion polymerization. The effects of monomer ratio （AM/TMAEMC）, dispersant concentration, and dispersion stabilizer dosage on dispersion polymerization were systematically studied to determine the optimal preparation conditions. The structure and viscosity of the synthesized polymer were characterized by FTIR and capillary viscometry, respectively, and the particle sizes and distribution of the polymer microspheres were characterized by microscopy and dynamic light scattering, respectively. Finally, flow tests were conducted to measure the permeability reduction performance of the microspheres at various concentrations in sand packs with different permeability. Results show that CPAM emulsion of a solids content of 1 wt% has excellent performance in low-to-medium permeability formations （〈 1,000 mD）, and the efficiency may reach above 90%.

Vibration behavior optimization of planetary gear sets

This paper presents a global optimization method focused on planetary gear vibration reduction by means of tip relief profile modifications.A nonlinear dynamic model is uspd to study the vibration behavior.In order to investig ate the optimal radius and amplitude,Brute Force method optimization is used.One approach in optimization is straightforward and requires considerable computation power:brute force methods try to calculate all possible solutions and decide afterwards which one is the best.Results show the influence of optimal profile on planetary gear vibrations.

Biochemical reactions in metabolite-protein interaction

Active endogenous metabolites regulate the viability of cells. This process is controlled by a series ofinteractions between small metabolites and large proteins. Previously, several studies had reported thatmetabolite regulates the protein functions, such as diacylglycerol to protein kinase C, lactose regulationof the lac repressor, and HIF-1α stabilization by 2-hydroxyglutarate. However, decades old traditionalbiochemical methods are insufficient to systematically investigate the bio-molecular reactions for a high-throughput discovery. Here, we have reviewed an update on the recently developed chemical proteomicscalled activity-based protein profiling （ABPP）. ABPP is able to identify proteins interacted eithercovalently or non-covalently with metabolites significantly. Thus, ABPP will facilitate the characteriza-tion of specific metabolite regulating; proteins in human disease progression.