This paper proposes to adopt SCADA and PLC technology for the improvement of the performance of real time signaling&train control systems in metro railways.The main concern of this paper is to minimize the failure...This paper proposes to adopt SCADA and PLC technology for the improvement of the performance of real time signaling&train control systems in metro railways.The main concern of this paper is to minimize the failure in automated metro railways system operator and integrate the information coming from Operational Control Centre(OCC),traction SCADA system,traction power control,and power supply system.This work presents a simulated prototype of an automated metro train system operator that uses PLC and SCADA for the real time monitoring and control of the metro railway systems.Here,SCADA is used for the visualization of an automated process operation and then the whole opera-tion is regulated with the help of PLC.The PLC used in this process is OMRON(NX1P2-9024DT1)and OMRON’s Sysmac studio programming software is used for developing the ladder logic of PLC.The metro railways system has deployed infrastructure based on SCADA from the power supply system,and each station’s traction power control is connected to the OCC remotely which commands all of the stations and has the highest command priority.An alarm is triggered in the event of an emergency or system congestion.This proposed system overcomes the drawbacks of the current centralized automatic train control(CATC)system.This system provides prominent benefits like augmenting services which may enhance a network’s full load capacity and networkflexibility,which help in easy modification in the existing program at any time.展开更多
The control method of rubber tyre gantry （RTG） spreader in Qingdao Port Container Terminal is logic board control,which has many shortcomings such as expensive spare parts and high faults.This paper designs a new co...The control method of rubber tyre gantry （RTG） spreader in Qingdao Port Container Terminal is logic board control,which has many shortcomings such as expensive spare parts and high faults.This paper designs a new control system using programmable logic controller （PLC） centralized control to replace the original logic board control.The new system mainly contains complete ELME spreader control scheme design,hardware selection and PLC control program development.Its field application shows that the system has characteristics of high efficiency,low running cost,easy maintenance.展开更多
In the field of industrial process control,a fast-development platform for programmable logic controller(PLC)systems is designed in order to solve two main problems of rapid development of PLC control system and progr...In the field of industrial process control,a fast-development platform for programmable logic controller(PLC)systems is designed in order to solve two main problems of rapid development of PLC control system and programmability of controlling software.In the aspect of design,the platform is composed of hardware controlling and software monitoring and is taking industrial computer as the core.Under the Windows environment,the platform establishes the control instruction set,develops the configuration function and visual programming function of the monitoring software and it integrates PLC controller based on Visual Basic software.In order to achieve the function of data monitoring,it has realized the serial communication between computer and PLC by using RS-485 and RS-232 serial ports line communication.The platform designs the intelligent instruction scheduling strategy by studying the encoding and decoding rules of the communication instruction set.It proposes a method for rapidly developing control programs by adopting the expert control mode,which enables clients to develop and modify programs conveniently by importing instructions in a non-coded manner.After experimental testing,the platform is proved successful achieving both the rapid development of PLC control system and the rapid modification of monitoring software.展开更多
Servo pressure pulse testing equipment uses servo-hydraulic technology to build the model of hydraulic system. By improving measurement and control system, the equipment accomplishes signal acquisition, data processin...Servo pressure pulse testing equipment uses servo-hydraulic technology to build the model of hydraulic system. By improving measurement and control system, the equipment accomplishes signal acquisition, data processing and process con- trol. LabVIEW and programmable logic controller （PLC） are used to carry out the hardware configuration and software de- velopment. The system can communicate between LabVIEW and PLC by virtual instrumentation software architecture （VI- SA） and run automatically in accordance with setting commands. Therefore, accuracy and performance of the equipment are improved.展开更多
Deep-water jacket skirt pile grouting is a critical step in ocean platform construction. Because of the complexity of the skirt pile structure and grouting pipeline, the calculation of grouting pressure and the contro...Deep-water jacket skirt pile grouting is a critical step in ocean platform construction. Because of the complexity of the skirt pile structure and grouting pipeline, the calculation of grouting pressure and the control of output pressure are involved. Beginning with the jacket skirt pile grouting construction scheme, grouting pressure is estimated on the basis of engineering fluid mechanics theory and variable frequency control technique. Programmable logic controller is the center of grouting pressure control system, which accomplishes the flow control of cement buffer tank, water buffer tank, additive buffer tank, cement metering tank, water metering tank, additive metering tank, mixer and agitator. Based on PROFIBUS-DP network, the output pressure of the slurry pump is controlled by the inverter. This method has been applied successfully in JZ20-2 Nor. high spot jacket platform construction.展开更多
The Ethernet and field-bus communications are used in the machine control system （MCS） of HL-2A. The control net, with a programmable logic controller （PLC） as its logic control master, an engineering control mana...The Ethernet and field-bus communications are used in the machine control system （MCS） of HL-2A. The control net, with a programmable logic controller （PLC） as its logic control master, an engineering control management station as its net server, and a timing control PC connected to a number of terminals, flexibly and freely transfers information among the nodes on it with the Ethernet transmission techniques. The PLC masters the field bus, which carries small pieces of information between PLC and the field sites reliably and quickly. The control net is connected into the data net, where Internet access and sharing of more experimental data are enabled. The communication in the MCS guarantees the digitalization, automation and centralization. Also provided are a satisfactory degree of safety, reliability, stability, expandability and flexibility for maintenance.展开更多
The design of a control system for the material transport as used in gear-box flexible manufacturing system is presented in this paper. The scope of investigation covers material transport control, automatic vehicle, ...The design of a control system for the material transport as used in gear-box flexible manufacturing system is presented in this paper. The scope of investigation covers material transport control, automatic vehicle, material exchange station, multi-storeyed warehouse system, NC and CNC machines and host computer etc. The paper describes the transport control system and its design, and briefly describes the communication among devices and warehouse access principles.展开更多
In order to help the small-scale farmer, an automatic irrigation control system was proposed. This system will provide an irrigation system that will ease the burden of the citizen to take care of the plant. This syst...In order to help the small-scale farmer, an automatic irrigation control system was proposed. This system will provide an irrigation system that will ease the burden of the citizen to take care of the plant. This system will run automatically by referring to the time set by the user. As the name itself is a water control system, this system will only start irrigating when the time set triggered the water control level for the plant to grow healthily. It will automatically stop when the timer is off (1 hour). The brain of the system is the PLC (Programmable Logic Controller). This is the place where all the activities are done. The irrigation will be provided by a pump that is also connected to the microcontroller. The pump will be activated until the timer has reached its time set. This system will continue running until the user presses the OFF button.展开更多
文摘This paper proposes to adopt SCADA and PLC technology for the improvement of the performance of real time signaling&train control systems in metro railways.The main concern of this paper is to minimize the failure in automated metro railways system operator and integrate the information coming from Operational Control Centre(OCC),traction SCADA system,traction power control,and power supply system.This work presents a simulated prototype of an automated metro train system operator that uses PLC and SCADA for the real time monitoring and control of the metro railway systems.Here,SCADA is used for the visualization of an automated process operation and then the whole opera-tion is regulated with the help of PLC.The PLC used in this process is OMRON(NX1P2-9024DT1)and OMRON’s Sysmac studio programming software is used for developing the ladder logic of PLC.The metro railways system has deployed infrastructure based on SCADA from the power supply system,and each station’s traction power control is connected to the OCC remotely which commands all of the stations and has the highest command priority.An alarm is triggered in the event of an emergency or system congestion.This proposed system overcomes the drawbacks of the current centralized automatic train control(CATC)system.This system provides prominent benefits like augmenting services which may enhance a network’s full load capacity and networkflexibility,which help in easy modification in the existing program at any time.
基金Shandong University of Science and Technology Spring Buds Program(No.2010AZZ170)
文摘The control method of rubber tyre gantry （RTG） spreader in Qingdao Port Container Terminal is logic board control,which has many shortcomings such as expensive spare parts and high faults.This paper designs a new control system using programmable logic controller （PLC） centralized control to replace the original logic board control.The new system mainly contains complete ELME spreader control scheme design,hardware selection and PLC control program development.Its field application shows that the system has characteristics of high efficiency,low running cost,easy maintenance.
基金Supported by the International S&T Cooperation Program of China(No.2014DFR70280)Key Research and Development Project of Shanxi Province(No.201903D321012)+1 种基金Key Research and Development Project of Shanxi Province(No.201903D121023)Patent Promotion and Implementation Funding Research Project of Shanxi Province(No.20210521).
文摘In the field of industrial process control,a fast-development platform for programmable logic controller(PLC)systems is designed in order to solve two main problems of rapid development of PLC control system and programmability of controlling software.In the aspect of design,the platform is composed of hardware controlling and software monitoring and is taking industrial computer as the core.Under the Windows environment,the platform establishes the control instruction set,develops the configuration function and visual programming function of the monitoring software and it integrates PLC controller based on Visual Basic software.In order to achieve the function of data monitoring,it has realized the serial communication between computer and PLC by using RS-485 and RS-232 serial ports line communication.The platform designs the intelligent instruction scheduling strategy by studying the encoding and decoding rules of the communication instruction set.It proposes a method for rapidly developing control programs by adopting the expert control mode,which enables clients to develop and modify programs conveniently by importing instructions in a non-coded manner.After experimental testing,the platform is proved successful achieving both the rapid development of PLC control system and the rapid modification of monitoring software.
基金High Level Talented Person Funded Project of Hebei Province(No.C2013005003)Excellent Experts for Going Abroad Training Program of Hebei Province(No.10215601D)
文摘Servo pressure pulse testing equipment uses servo-hydraulic technology to build the model of hydraulic system. By improving measurement and control system, the equipment accomplishes signal acquisition, data processing and process con- trol. LabVIEW and programmable logic controller （PLC） are used to carry out the hardware configuration and software de- velopment. The system can communicate between LabVIEW and PLC by virtual instrumentation software architecture （VI- SA） and run automatically in accordance with setting commands. Therefore, accuracy and performance of the equipment are improved.
基金Supported by Key Research Project of China Offshore Oil Engineering Co,Ltd.
文摘Deep-water jacket skirt pile grouting is a critical step in ocean platform construction. Because of the complexity of the skirt pile structure and grouting pipeline, the calculation of grouting pressure and the control of output pressure are involved. Beginning with the jacket skirt pile grouting construction scheme, grouting pressure is estimated on the basis of engineering fluid mechanics theory and variable frequency control technique. Programmable logic controller is the center of grouting pressure control system, which accomplishes the flow control of cement buffer tank, water buffer tank, additive buffer tank, cement metering tank, water metering tank, additive metering tank, mixer and agitator. Based on PROFIBUS-DP network, the output pressure of the slurry pump is controlled by the inverter. This method has been applied successfully in JZ20-2 Nor. high spot jacket platform construction.
基金The project supported by National Natural Science Foundation of China (No. 10175022) and Sichuan Provincial Youth Foundation
文摘The Ethernet and field-bus communications are used in the machine control system （MCS） of HL-2A. The control net, with a programmable logic controller （PLC） as its logic control master, an engineering control management station as its net server, and a timing control PC connected to a number of terminals, flexibly and freely transfers information among the nodes on it with the Ethernet transmission techniques. The PLC masters the field bus, which carries small pieces of information between PLC and the field sites reliably and quickly. The control net is connected into the data net, where Internet access and sharing of more experimental data are enabled. The communication in the MCS guarantees the digitalization, automation and centralization. Also provided are a satisfactory degree of safety, reliability, stability, expandability and flexibility for maintenance.
文摘The design of a control system for the material transport as used in gear-box flexible manufacturing system is presented in this paper. The scope of investigation covers material transport control, automatic vehicle, material exchange station, multi-storeyed warehouse system, NC and CNC machines and host computer etc. The paper describes the transport control system and its design, and briefly describes the communication among devices and warehouse access principles.
文摘In order to help the small-scale farmer, an automatic irrigation control system was proposed. This system will provide an irrigation system that will ease the burden of the citizen to take care of the plant. This system will run automatically by referring to the time set by the user. As the name itself is a water control system, this system will only start irrigating when the time set triggered the water control level for the plant to grow healthily. It will automatically stop when the timer is off (1 hour). The brain of the system is the PLC (Programmable Logic Controller). This is the place where all the activities are done. The irrigation will be provided by a pump that is also connected to the microcontroller. The pump will be activated until the timer has reached its time set. This system will continue running until the user presses the OFF button.
