Effectiveness of Using Project Method in Teaching Professional Foreign Language

The purpose of the paper is to demonstrate the effectiveness of using project method in teaching professional English in non-linguistic colleges. The main principles of project teaching, the technology of its adoption in teaching process, and some kinds of projects used in studying are reviewed. During the research the following methods were used： theoretical analysis, empirical, and statistical. While studying the course ＂Professional foreign language＂, the monitoring of effectiveness of project method use in teaching a foreign language was made. Monitoring was conducted under the following criteria： percent of progress, percent of quality of knowledge, and the level of motivation in studying English. The experience showed that in the process of project work learners＇ general educational abilities, special abilities, and communication abilities are developed.

Cascading multi-segment rupture process of the 2023 Turkish earthquake doublet on a complex fault system revealed by teleseismic P wave back projection method

In this study,the vertical components of broadband teleseismic P wave data recorded by China Earthquake Network are used to image the rupture processes of the February 6th,2023 Turkish earthquake doublet via back projection analysis.Data in two frequency bands(0.5-2 Hz and 1-3 Hz)are used in the imaging processes.The results show that the rupture of the first event extends about 200 km to the northeast and about 150 km to the southwest,lasting~90 s in total.The southwestern rupture is triggered by the northeastern rupture,demonstrating a sequential bidirectional unilateral rupture pattern.The rupture of the second event extends approximately 80 km in both northeast and west directions,lasting~35 s in total and demonstrates a typical bilateral rupture feature.The cascading ruptures on both sides also reflect the occurrence of selective rupture behaviors on bifurcated faults.In addition,we observe super-shear ruptures on certain fault sections with relatively straight fault structures and sparse aftershocks.

New algorithm for solving 3D incompressible viscous equations based on projection method

A new algorithm based on the projection method with the implicit finite difference technique was established to calculate the velocity fields and pressure.The calculation region can be divided into different regions according to Reynolds number.In the far-wall region,the thermal melt flow was calculated as Newtonian flow.In the near-wall region,the thermal melt flow was calculated as non-Newtonian flow.It was proved that the new algorithm based on the projection method with the implicit technique was correct through nonparametric statistics method and experiment.The simulation results show that the new algorithm based on the projection method with the implicit technique calculates more quickly than the solution algorithm-volume of fluid method using the explicit difference method.

Multi-Parameter Design and Optimization for the Decomposition Projective Method and Its Applications

In order to solve the electromagnetic problems on the large multi branch domains, the decomposition projective method(DPM) is generalized for multi subspaces in this paper. Furthermore multi parameters are designed for DPM, which is called the fast DPM(FDPM), and the convergence ratio of the above algorithm is greatly increased. The examples show that the iterative number of the FDPM with optimal parameters decreases much more, which is less than one third of the DPM iteration number. After studying the ...

Low side lobe pattern synthesis using projection method with genetic algorithm for truncated cone conformal phased arrays

A hybrid method for synthesizing antenna＇s three dimensional （3D） pattern is proposed to obtain the low sidelobe feature of truncated cone conformal phased arrays. In this method, the elements of truncated cone conformal phased arrays are projected to the tangent plane in one generatrix of the truncated cone. Then two dimensional （2D） Chebyshev amplitude distribution optimization is respectively used in two mutual vertical directions of the tangent plane. According to the location of the elements, the excitation current amplitude distribution of each element on the conformal structure is derived reversely, then the excitation current amplitude is further optimized by using the genetic algorithm （GA）. A truncated cone problem with 8x8 elements on it, and a 3D pattern desired side lobe level （SLL） up to 35 dB, is studied. By using the hybrid method, the optimal goal is accomplished with acceptable CPU time, which indicates that this hybrid method for the low sidelobe synthesis is feasible.

Program evaluation and its application to equipment based on super-efficiency DEA and gray relation projection method

For the gray attributes of the equipment program and its difficulty to carry out the quantitative assessment of the equipment program information, the gray relation projection method is simply reviewed. Combining the super-data envelopment analysis（DEA） model and the gray system theory, a new super-DEA for measuring the weight is proposed, and a gray relation projection model is established to rank the equipment programs. Finally, this approach is used to evaluate the equipment program. The results are verified valid and can provide a new way for evaluating the equipment program.

New Exact Travelling Wave Solutions for Generalized Zakharov-Kuzentsov EquationsUsing General Projective Riccati Equation Method

Applying the generalized method, which is a direct and unified algebraic method for constructing multipletravelling wave solutions of nonlinear partial differential equations (PDEs), and implementing in a computer algebraicsystem, we consider the generalized Zakharov-Kuzentsov equation with nonlinear terms of any order. As a result, wecan not only successfully recover the previously known travelling wave solutions found by existing various tanh methodsand other sophisticated methods, but also obtain some new formal solutions. The solutions obtained include kink-shapedsolitons, bell-shaped solitons, singular solitons, and periodic solutions.

Superconvergence of nonconforming finite element penalty scheme for Stokes problem using L^2 projection method

A modified penalty scheme is discussed for solving the Stokes problem with the Crouzeix-Raviart type nonconforming linear triangular finite element. By the L^2 projection method, the superconvergence results for the velocity and pressure are obtained with a penalty parameter larger than that of the classical penalty scheme. The numerical experiments are carried out to confirm the theoretical results.

Projection and Contraction Methods for Nonlinear Complementarity Problem

We applied the projection and contraction method to nonlinear complementarity problem (NCP). Moveover, we proposed an inexact implicit method for (NCP) and proved the convergence.

A class of fully third-order accurate projection methods for solving the incompressible Navier-Stokes equations

In this paper, a fully third-order accurate projection method for solving the incompressible Navier-Stokes equations is proposed. To construct the scheme, a continuous projection procedure is firstly presented. We then derive a sufficient condition for the continuous projection equations to be temporally third-order accurate approximations of the original Navier-Stokes equations by means of the localtruncation-error-analysis technique. The continuous projection equations are discretized temporally and spatially to third-order accuracy on the staggered grids, resulting in a fully third-order discrete projection scheme. The possibility to design higher-order projection methods is thus demonstrated in the present paper. A heuristic stability analysis is performed on this projection method showing the probability of its being stable. The stability of the present scheme is further verified through numerical tests. The third-order accuracy of the present projection method is validated by several numerical test cases.

Projected Runge-Kutta methods for constrained Hamiltonian systems

Projected Runge-Kutta （R-K） methods for constrained Hamiltonian systems are proposed. Dynamic equations of the systems, which are index-3 differential-algebraic equations （DAEs） in the Heisenberg form, are established under the framework of Lagrangian multipliers. R-K methods combined with the technique of projections are then used to solve the DAEs. The basic idea of projections is to eliminate the constraint violations at the position, velocity, and acceleration levels, and to preserve the total energy of constrained Hamiltonian systems by correcting variables of the position, velocity, acceleration, and energy. Numerical results confirm the validity and show the high precision of the proposed method in preserving three levels of constraints and total energy compared with results reported in the literature.

A New Conjugate Gradient Projection Method for Solving Stochastic Generalized Linear Complementarity Problems

In this paper, a class of the stochastic generalized linear complementarity problems with finitely many elements is proposed for the first time. Based on the Fischer-Burmeister function, a new conjugate gradient projection method is given for solving the stochastic generalized linear complementarity problems. The global convergence of the conjugate gradient projection method is proved and the related numerical results are also reported.

An Efficient Projected Gradient Method for Convex Constrained Monotone Equations with Applications in Compressive Sensing

In this paper, a modified Polak-Ribière-Polyak conjugate gradient projection method is proposed for solving large scale nonlinear convex constrained monotone equations based on the projection method of Solodov and Svaiter. The obtained method has low-complexity property and converges globally. Furthermore, this method has also been extended to solve the sparse signal reconstruction in compressive sensing. Numerical experiments illustrate the efficiency of the given method and show that such non-monotone method is suitable for some large scale problems.

PROJECTION METHODS AND APPROXIMATIONS FOR ORDINARY DIFFERENTIAL EQUATIONS

A formulation of a differential equation as projection and fixed point pi-Mem alloivs approximations using general piecnvise functions. We prone existence and uniqueness of the up proximate solution* convergence in the L2 norm and nodal supercnnvergence. These results generalize those obtained earlier by Hulme for continuous piecevjise polynomials and by Delfour-Dubeau for discontinuous pieceuiise polynomials. A duality relationship for the two types of approximations is also given.

ON THE MONOTONE CONVERGENCE OF THE PROJECTED ITERATION METHODS FOR LINEAR COMPLEMENTARITY PROBLEMS

Under suitable conditions,the monotone convergence about the projected iteration method for solving linear complementarity problem is proved and the influence of the involved parameter matrix on the convergence rate of this method is investigated.

Application of Extended Projective Riccati Equation Method to(2+1)-Dimensional Broer-Kaup-Kupershmidt System

In this paper, extended projective Riccati equation method is presented for constructing more new exact solutions of nonlinear differential equations in mathematical physics, which is direct and more powerful than projective Riccati equation method. In order to illustrate the effect of the method, Broer Kaup Kupershmidt system is employed and Jacobi doubly periodic solutions are obtained. This algorithm can also be applied to other nonlinear differential equations.

基于Projection VOF方法的熔模铸造蜡模充型过程数值模拟

针对熔模铸造蜡模充型过程数值模拟软件自主开发,建立了流动场和温度场数学模型,采用Cross-WLF粘度模型描述蜡料的流变性能,基于Projection VOF方法进行蜡料流动过程速度场、压力场以及自由表面的求解。通过试验测量获取了K512型蜡料的热物理性能和流变性能的相关数据,拟合得到粘度模型参数。分别在蜡料常粘度和变粘度模型两种条件下对扳机铸件蜡模充型过程进行模拟,结果表明,所建立蜡模充型过程数学模型能较好地描述蜡料的动态流变特性和传热行为。

Essential consistency of pressure Poisson equation method and projection method on staggered grids

A new pressure Poisson equation method with viscous terms is established on staggered grids. The derivations show that the newly established pressure equation has the identical equation form in the projection method. The results show that the two methods have the same velocity and pressure values except slight differences in the CPU time.

A Modified Projection Method for Linear Feasibility Problems

In this paper, we present a modified projection method for the linear feasibility problems （LFP）. Compared with the existing methods, the new method adopts a surrogate technique to obtain new iteration instead of the line search procedure with fixed stepsize. For the new method, we first show its global convergence under the condition that the solution set is nonempty, and then establish its linear convergence rate. Preliminary numerical experiments show that this method has good performance.

Variable Separation Solutions of Generalized Broer-Kaup System via a Projective Method

Using an extended projective method, a new type of variable separation solution with two arbitrary functions of the (2+1)-dimensional generalized Broer-Kaup system (GBK) is derived. Based on the derived variable separation solution, some special localized coherent soliton excitations with or without elastic behaviors such as dromions, peakons,and foldons etc. are revealed by selecting appropriate functions in this paper.