In order to study the instability propagation characteristics of the liquid kerosene rotating detonation wave(RDW),a series of experimental tests were carried out on the rotating detonation combustor(RDC)with air-heat...In order to study the instability propagation characteristics of the liquid kerosene rotating detonation wave(RDW),a series of experimental tests were carried out on the rotating detonation combustor(RDC)with air-heater.The fuel and oxidizer are room-temperature liquid kerosene and preheated oxygenenriched air,respectively.The experimental tests keep the equivalence ratio of 0.81 and the oxygen mass fraction of 35%unchanged,and the total mass flow rate is maintained at about 1000 g/s,changing the total temperature of the oxygen-enriched air from 620 K to 860 K.Three different types of instability were observed in the experiments:temporal and spatial instability,mode transition and re-initiation.The interaction between RDW and supply plenum may be the main reason for the fluctuations of detonation wave velocity and pressure peaks with time.Moreover,the inconsistent mixing of fuel and oxidizer at different circumferential positions is related to RDW oscillate spatially.The phenomenon of single-double-single wave transition is analyzed.During the transition,the initial RDW weakens until disappears,and the compression wave strengthens until it becomes a new RDWand propagates steadily.The increased deflagration between the detonation products and the fresh gas layer caused by excessively high temperature is one of the reasons for the RDC quenching and re-initiation.展开更多
In order to investigate detonation propagation characteristics of different charge patterns,the detonation velocities of superposition strip shaped charges made up of a detonating cord and explosives were measured by...In order to investigate detonation propagation characteristics of different charge patterns,the detonation velocities of superposition strip shaped charges made up of a detonating cord and explosives were measured by a detonation velocity measuring instrument under conditions of different ignition.The experimental results and theoretical analysis show that the maximum detonation propagation velocity depends on the explosive materials with the maximum velocity among all the explosive materials.Using detonating cord in a superposition charge can shorten detonation propagation time and improve the efficiency of explosive energy.The measurement method of detonation propagation velocity and experimental results are presented and investigated.展开更多
Using the finite element method, this paper investigates lateral stress-induced propagation characteristics in a photonic crystal fibre of hexagonal symmetry. The results of simulation show the strong stress dependenc...Using the finite element method, this paper investigates lateral stress-induced propagation characteristics in a photonic crystal fibre of hexagonal symmetry. The results of simulation show the strong stress dependence of effective index of the fundamental guided mode, phase modal birefringence and confinement loss. It also finds that the contribution of the geometrical effect that is related only to deformation of the photonic crystal fibre and the stress-related contribution to phase modal birefringence and confinement loss are entirely different. Furthermore, polarization-dependent stress sensitivity of confinement loss is proposed in this paper.展开更多
Axial propagation characteristics of the axisymmetric surface wave along the plasma in the medium tube were studied. The expressions of electromagnetic field inside and outside the medium tube were deduced. Also, the ...Axial propagation characteristics of the axisymmetric surface wave along the plasma in the medium tube were studied. The expressions of electromagnetic field inside and outside the medium tube were deduced. Also, the impacts of several factors, such as plasma density, signal frequency, inner radius of medium tube, collision frequency, etc., on plasma surface wave propa- gation were numerically simulated. The results show that, the properties of plasma with higher density and lower gas pressure are closer to those of metal conductor. Furthermore, larger radius of medium tube and lower signal frequency are better for surface wave propagation. However, the effect of collision frequency is not obvious. The optimized experimental parameters can be chosen as the plasma density of about 10^17 m^-3 and the medium radius between 11 mm and 19 mm.展开更多
Propagation characterization is one of the main building blocks for millimetre wave (MMW) communication. The Gaussian beam has attractive features to become a prospective wave form for millimetre radio communication...Propagation characterization is one of the main building blocks for millimetre wave (MMW) communication. The Gaussian beam has attractive features to become a prospective wave form for millimetre radio communication, especially for the utility inside tunnels. A ray tracing method embedded with spectral features of Gaussian beam is employed to analyze mil- limetre wave propagation in a circle tunnel in this paper. In consideration of geometrical figure of the tunnel, the superposition behaviour of direct and reflective beams is analyzed via simplified approximation of Gaussian beam spectral feature. Then the propagation models are established to derive amplitude, phase, and delay spread of received wave. A typical straight tunnel model is used to simulate the propagation behaviour, where strong multi-path effect with deeply fading of signal intensity and dramatically enhancing of delay spread emerges. For investigation of the spectral feature of the multi-path effect, a reflection loss of 14 dB is taken into consideration at a designated point. To analyze the influences of frequency and transmission distance, the propagation characteristics at three different frequencies of 45 GHz, 65 GHz and 85 GHz are compared with the beam travelling down the tunnel. In addition, three different reflection losses of 14 dB, 20 dB, and 26 dB at the frequency of 65 GHz are also investigated to research the influence of the reflecting coefficient.展开更多
The propagation characteristics of the beam under various initial conditions are in-vestigated by means of PIC method.The influences of density modulation and velocity modulationon the propagation characteristics are ...The propagation characteristics of the beam under various initial conditions are in-vestigated by means of PIC method.The influences of density modulation and velocity modulationon the propagation characteristics are discussed and compared.The results reveal that by chang-iug the amplitude of the two kinds of modulations and the phase difference between them,the展开更多
Rapid developments in EHV/UHV transmission systems require a deeper understanding of the mechanism of long air gap discharge.Leader propagation is one of the main processes in long gap breakdown.In this paper,the lead...Rapid developments in EHV/UHV transmission systems require a deeper understanding of the mechanism of long air gap discharge.Leader propagation is one of the main processes in long gap breakdown.In this paper,the leader propagation characteristics of real size±800 kV UHVDC transmission tower gaps under positive switching impulse voltages(185/2290μs)are investigated.An integrated observation platform consisting of an impulse voltage divider,a coaxial shunt,a high-speed video camera,and a set of integrated optical electric field sensors(IOES),is established.The waveforms of impulse voltage,discharge current,electric field variation at specific positions,and time-resolved photographs of discharge morphology are recorded.Axial leader velocity and the relationship between leader advancements and injected charge are obtained.The typical value of leader stable propagation velocity is 1.7–2.2 cm/μs,which varies slightly with the gap length and applied voltage amplitude.The leader velocity in the re-illumination process is much higher,and is seen as varying from 5 cm/μs to 30 cm/μs,with an average value around 10 cm/μs.The charge in leader channel per unit length is 20–40μC/m,which illustrates a near-direct proportion relationship between discharge current and leader velocity.The observed parameters are important for further simulation of the tower gap breakdown processes.展开更多
Electromagnetic vortices, which describe the orbital angular momentum(OAM) carrying waves with a helical phase front, have recently attracted much interest in a radio frequency domain due to their potential applicatio...Electromagnetic vortices, which describe the orbital angular momentum(OAM) carrying waves with a helical phase front, have recently attracted much interest in a radio frequency domain due to their potential applications in many diverse areas. In an OAM-based scenario, the antenna for OAM mode multiplexing/demultiplexing plays an essential role in controlling the overall system performance. In this paper, we demonstrated theoretically and experimentally an easily realized OAM antenna based on the traveling-wave circular loop structure for efficiently multiplexing/demultiplexing multiple OAM modes; in addition, its general propagation characteristics including the polarization, divergence, and radiation pattern are mathematically analyzed. Schemes for antenna size reduction and various radiation pattern manipulations have also been discussed to realize a more flexible and compact system.展开更多
The propagation characteristics of laser-generated like-Rayleigh waves in viscoelastic adhesive coating/substrate structures were studied.Considering the viscoelasticity of the coating and substrate,we have establishe...The propagation characteristics of laser-generated like-Rayleigh waves in viscoelastic adhesive coating/substrate structures were studied.Considering the viscoelasticity of the coating and substrate,we have established the finite element models in frequency domain for the laser-generated like-Rayleigh waves in the epoxy coating/aluminum substrate,epoxy coating/brass substrate,and epoxy coating/foam substrate structures,respectively.In addition,we have investigated the waveform and propagation characteristics of the like-Rayleigh waves and studied the influences of the coating transparency,coating thickness,coating viscoelasticity,and substrate viscoelasticity on the propagation characteristics of the like-Rayleigh waves.Moreover,we have verified the results by the theoretical phase velocity and attenuation curves.The results show that the coating viscoelasticity induces the attenuation characteristics of the higher frequencies of the like-Rayleigh waves,but has little effect on the lower frequencies,and the substrate viscoelasticity has the influences on both the higher and lower frequencies of the like-Rayleigh waves,especially the lower frequencies.Furthermore,the mode and dispersive characteristics of the like-Rayleigh waves are closely related to the substrates.This study provides a useful theoretical basis for inverting mechanical parameters and evaluating the adhesive quality of the viscoelastic adhesive coating/substrate structures.展开更多
In this study, in order to investigate the global climatic oscillations forced by sea surface temperature (SST) anomalies over equatorial central-eastern Pacific, two numerical schemes with different SST distri-bution...In this study, in order to investigate the global climatic oscillations forced by sea surface temperature (SST) anomalies over equatorial central-eastern Pacific, two numerical schemes with different SST distri-butions (normal and anomalous cases) are tested by using a nine-layer global spectral model. Experiment results show that (i) in northern summer, a wave train that is similar to the teleconnection pattern suggested by Nitta (1987) and Huang (1987) in the Northern Hemisphere and another one in the Southern Hemisphere are reproduced; (ii) simulated results suggest that the response of atmosphere in middle-high latitudes of both hemispheres to an anomalous heating source is more sensitive in tropical western Pacific than in equatorial central-eastern Pacific; and (iii) in northern summer, the formation of low-frequency oscillations on monthly (seasonal) time scale results from energy dispersion as well as interactions between eddies and zonal flow; and between eddies.展开更多
Using a full-vector finite-difference time-domain (FDTD) method, this article explores the propagation characteristics of photonic crystal fiber (PCF) theoretically. The dependence of structural parameters on the ...Using a full-vector finite-difference time-domain (FDTD) method, this article explores the propagation characteristics of photonic crystal fiber (PCF) theoretically. The dependence of structural parameters on the effective index of the fundamental guided mode, effective index of the fundamental cladding mode, mode field diameter, confinement loss, effective mode area, and chromatic dispersion in PCF have been studied, respectively. The research presents a reference for designing of PCF with a specific purpose.展开更多
In underground rock engineering,water-bearing faults may be subjected to dynamic loading,resulting in the coupling of hydraulic and dynamic hazards.Understanding the interaction mechanism between the stress waves indu...In underground rock engineering,water-bearing faults may be subjected to dynamic loading,resulting in the coupling of hydraulic and dynamic hazards.Understanding the interaction mechanism between the stress waves induced by dynamic loadings and liquid-filled rock joints is therefore crucial.In this study,an auxiliary device for simulating the liquid-filled layer was developed to analyze the dynamic response characteristics of liquid-filled rock joints in laboratory.Granite and polymethyl methacrylate(PMMA)specimens were chosen for testing,and high-amplitude shock waves induced by a split Hopkinson pressure bar(SHPB)were used to produce dynamic loadings.Impact loading tests were conducted on liquid-filled rock joints with different joint inclinations.The energy propagation coefficient and peak liquid pressure were proposed to investigate the energy propagation and attenuation of waves propagating across the joints,as well as the dynamic response characteristics of the liquid in the liquid-filled rock joints.For the inclination angle range considered herein,the experimental results showed that the energy propagation coefficient gently diminished with increasing joint inclination,and smaller coefficient values were obtained for granite specimens compared with PMMA specimens.The peak liquid pressure exhibited a gradually decreasing trend with increasing joint inclination,and the peak pressure for granite specimens was slightly higher than that for PMMA specimens.Overall,this paper may provide a considerably better method for studying liquid-filled rock joints at the laboratory scale,and serves as a guide for interpreting the underlying mechanisms for interactions between stress waves and liquid-filled rock joints.展开更多
In order to support the future digital society,sixth generation(6G)network faces the challenge to work efficiently and flexibly in a wider range of scenarios.The traditional way of system design is to sequentially get...In order to support the future digital society,sixth generation(6G)network faces the challenge to work efficiently and flexibly in a wider range of scenarios.The traditional way of system design is to sequentially get the electromagnetic wave propagation model of typical scenarios firstly and then do the network design by simulation offline,which obviously leads to a 6G network lacking of adaptation to dynamic environments.Recently,with the aid of sensing enhancement,more environment information can be obtained.Based on this,from radio wave propagation perspective,we propose a predictive 6G network with environment sensing enhancement,the electromagnetic wave propagation characteristics prediction enabled network(EWave Net),to further release the potential of 6G.To this end,a prediction plane is created to sense,predict and utilize the physical environment information in EWave Net to realize the electromagnetic wave propagation characteristics prediction timely.A two-level closed feedback workflow is also designed to enhance the sensing and prediction ability for EWave Net.Several promising application cases of EWave Net are analyzed and the open issues to achieve this goal are addressed finally.展开更多
The form of Boussinesq equation derived by Nwogu (1993) using velocity at an arbitrary distance and surface elevation as variables is used to simulate wave surface elevation changes. In the numerical experiment, wat...The form of Boussinesq equation derived by Nwogu (1993) using velocity at an arbitrary distance and surface elevation as variables is used to simulate wave surface elevation changes. In the numerical experiment, water depth was divided into five layers with six layer interfaces to simulate velocity at each layer interface. Besides, a physical experiment was carried out to validate numerical model and study solitary wave propagation.“Water column collapsing”method (WCCM) was used to generate solitary wave. A series of wave gauges around an impervious breakwater were set-up in the flume to measure the solitary wave shoaling, run-up, and breaking processes. The results show that the measured data and simulated data are in good agreement. Moreover, simulated and measured surface elevations were analyzed by the wavelet transform method. It shows that different wave frequencies stratified in the wavelet amplitude spectrum. Finally, horizontal and vertical velocities of each layer interface were analyzed in the process of solitary wave propagation through submerged breakwater.展开更多
The phase shift characteristics reflect the state change of electromagnetic wave in plasma sheath and can be used to reveal deeply the action mechanism between electromagnetic wave and plasma sheath.In this paper,the ...The phase shift characteristics reflect the state change of electromagnetic wave in plasma sheath and can be used to reveal deeply the action mechanism between electromagnetic wave and plasma sheath.In this paper,the phase shift characteristics of electromagnetic wave propagation in plasma were investigated.Firstly,the impact factors of phase shift including electron density,collision frequency and incident frequency were discussed.Then,the plasma with different electron density distribution profiles were employed to investigate the influence on the phase shift characteristics.In a real case,the plasma sheath around the hypersonic vehicle will affect and even break down the communication.Based on the hypersonic vehicle model,we studied the electromagnetic wave phase shift under different flight altitude,speed,and attack angle.The results indicate that the phase shift is inversely proportional to the flight altitude and positively proportional to the flight speed and attack angle.Our work provides a theoretical guidance for the further research of phase shift characteristics and parameters inversion in plasma.展开更多
Communication in the evaporation duct layer is greatly affected by the variation of meteorological parameters.Based on the experimental result of the radio transmission of the X-band over the Qiongzhou Strait of China...Communication in the evaporation duct layer is greatly affected by the variation of meteorological parameters.Based on the experimental result of the radio transmission of the X-band over the Qiongzhou Strait of China,the characteristic of the duct and its influence on the transmission effect is analyzed.The results indicate that the evaporation duct height(EDH)has a negative Spearman’s rank correlation of-0.90 with the relative humidity and a positive correlation coefficient of 0.84 with the wind speed.Based on the Extreme Learning Machine(ELM)network,we proposed a Met-ELM model that can provide efficient support in predicting propagation characteristics at nighttime.The predicted results of the MetELM model are consistent with the measurements;the root-mean-square-error is 1.66 dB,with the correlation coefficient reaching 0.96,while the proportion of mean absolute error less than 2 dB has reached81.41%.The data-derived Met-ELM model shows great accuracy in predicting propagation characteristics at nighttime,which also meets the acceptable requirements for radio wave propagation.展开更多
Hainan,an island province of China in the northern South China Sea,experienced two sustained rainstorms in October 2010,which were the most severe autumn rainstorms of the past 60 years.From August to October 2010,the...Hainan,an island province of China in the northern South China Sea,experienced two sustained rainstorms in October 2010,which were the most severe autumn rainstorms of the past 60 years.From August to October 2010,the most dominant signal of Hainan rainfall was the 10-20-day oscillation.This paper examines the roles of the 10-20-day oscillation in the convective activity and atmospheric circulation during the rainstorms of October 2010 over Hainan.During both rainstorms,Hainan was near the center of convective activity and under the influence of a lower-troposphere cyclonic circulation.The convective center was initiated in the west-central tropical Indian Ocean several days prior to the rainstorm in Hainan.The convective center first propagated eastward to the maritime continent,accompanied by the cyclonic circulation,and then moved northward to the northern South China Sea and South China,causing the rainstorms over Hainan.In addition,the westward propagation of convection from the tropical western Pacific to the southern South China Sea,as well as the propagation farther northward,intensified the convective activity over the northern South China Sea and South China during the first rainstorm.展开更多
Vertical cumulus momentum transport is an important physical process in the tropical atmosphere and plays a key role in the evolution of the tropical atmospheric system. This paper focuses on the impact of the vertica...Vertical cumulus momentum transport is an important physical process in the tropical atmosphere and plays a key role in the evolution of the tropical atmospheric system. This paper focuses on the impact of the vertical cumulus momentum transport on Madden-Julian Oscillation (MJO) simulation in two global climate models (GCMs). The Tiedtke cumulus parameterization scheme is applied to both GCMs [CAM2 and Spectral Atmospheric general circulation Model of LASG/IAP (SAMIL)]. It is found that the MJO simulation ability might be influenced by the vertical cumulus momentum transport through the cumulus parameterization scheme. However, the use of vertical momentum transport in different models provides different results. In order to improve model's MJO simulation ability, we must introduce vertical cumulus momentum transport in a more reasonable way into models. Furthermore, the coherence of the parameterization and the underlying model also need to be considered.展开更多
A 2D axial symmetry fluid model is applied to study the features of an atmospheric-pressure argon(Ar) plasma jet propagating into ambient nitrogen(N_(2)) driven by a pulsed voltage,emphasizing the influence of gas vel...A 2D axial symmetry fluid model is applied to study the features of an atmospheric-pressure argon(Ar) plasma jet propagating into ambient nitrogen(N_(2)) driven by a pulsed voltage,emphasizing the influence of gas velocity on the dynamic characteristics of the jet. The results show that the Ar jet exhibits a cylindrical-shaped channel and the jet channel gradually shrinks with the increase in propagation length. The jet propagation velocity varies with time. Inside the dielectric tube, the plasma jet accelerates propagation and reaches its maximum value near the nozzle. Exiting the tube, its velocity quickly decreases and when approaching the metal plane,the decrease in jet velocity slows down. The increase in gas speed results in the variation of jet spatial distribution. The electron density presents a solid structure at lower gas flow speeds,whereas an annular structure can be observed under the higher gas flow velocity in the ionization head. The jet length increases with the flow velocity. However, when the flow velocity exceeds a critical value, the increase in the rate of the plasma jet length slows down. In addition, the gas velocity effect on the generation and transport of the reactive particles is also studied and discussed.展开更多
We report the generation of a crossed,focused,optical vortex beam by using a pair of hybrid holograms,which combine the vortex phase and lens phase onto a spatial light modulator.We study the intensity distributions o...We report the generation of a crossed,focused,optical vortex beam by using a pair of hybrid holograms,which combine the vortex phase and lens phase onto a spatial light modulator.We study the intensity distributions of the vortex beam in free propagation space,and the relationship of its dark spot size with the incident Gaussian beam’s waist,the lens’s focal length,and its orbital angular momentum.Our results show that the crossed,focused,vortex beam’s dark spot size can be as small as 16.3μm and adjustable by the quantum number of the orbital angular momentum,and can be used to increase the density of trapped molecules.Furthermore,we calculate the optical potential of the blue-detuned,crossed vortex beam for MgF molecules.It is applicable to cool and trap neutral molecules by intensity-gradient-induced Sisyphus cooling,as the intensity gradient of such vortex beam is extremely high near the focal point.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.11802137,11702143 and 11802039)the Fundamental Research Funds for the Central Universities(No.30919011259).
文摘In order to study the instability propagation characteristics of the liquid kerosene rotating detonation wave(RDW),a series of experimental tests were carried out on the rotating detonation combustor(RDC)with air-heater.The fuel and oxidizer are room-temperature liquid kerosene and preheated oxygenenriched air,respectively.The experimental tests keep the equivalence ratio of 0.81 and the oxygen mass fraction of 35%unchanged,and the total mass flow rate is maintained at about 1000 g/s,changing the total temperature of the oxygen-enriched air from 620 K to 860 K.Three different types of instability were observed in the experiments:temporal and spatial instability,mode transition and re-initiation.The interaction between RDW and supply plenum may be the main reason for the fluctuations of detonation wave velocity and pressure peaks with time.Moreover,the inconsistent mixing of fuel and oxidizer at different circumferential positions is related to RDW oscillate spatially.The phenomenon of single-double-single wave transition is analyzed.During the transition,the initial RDW weakens until disappears,and the compression wave strengthens until it becomes a new RDWand propagates steadily.The increased deflagration between the detonation products and the fresh gas layer caused by excessively high temperature is one of the reasons for the RDC quenching and re-initiation.
文摘In order to investigate detonation propagation characteristics of different charge patterns,the detonation velocities of superposition strip shaped charges made up of a detonating cord and explosives were measured by a detonation velocity measuring instrument under conditions of different ignition.The experimental results and theoretical analysis show that the maximum detonation propagation velocity depends on the explosive materials with the maximum velocity among all the explosive materials.Using detonating cord in a superposition charge can shorten detonation propagation time and improve the efficiency of explosive energy.The measurement method of detonation propagation velocity and experimental results are presented and investigated.
基金supported by the National Natural Science Foundation of China (Grant No 60644004)the State Key Development Program for Basic Research of China (Grant No 2003CB314901)
文摘Using the finite element method, this paper investigates lateral stress-induced propagation characteristics in a photonic crystal fibre of hexagonal symmetry. The results of simulation show the strong stress dependence of effective index of the fundamental guided mode, phase modal birefringence and confinement loss. It also finds that the contribution of the geometrical effect that is related only to deformation of the photonic crystal fibre and the stress-related contribution to phase modal birefringence and confinement loss are entirely different. Furthermore, polarization-dependent stress sensitivity of confinement loss is proposed in this paper.
基金Basic Scientific Research Fund of National Defense and Scientific Research Development Fund of the Engineering & Technical college,Chengdu University of Technology(No.C122007019)
文摘Axial propagation characteristics of the axisymmetric surface wave along the plasma in the medium tube were studied. The expressions of electromagnetic field inside and outside the medium tube were deduced. Also, the impacts of several factors, such as plasma density, signal frequency, inner radius of medium tube, collision frequency, etc., on plasma surface wave propa- gation were numerically simulated. The results show that, the properties of plasma with higher density and lower gas pressure are closer to those of metal conductor. Furthermore, larger radius of medium tube and lower signal frequency are better for surface wave propagation. However, the effect of collision frequency is not obvious. The optimized experimental parameters can be chosen as the plasma density of about 10^17 m^-3 and the medium radius between 11 mm and 19 mm.
基金supported by the Shanghai Leading Academic Discipline Project (Grant No.S30108)the Science and Technology Commission of Shanghai Municipality (Grant No.08DZ2231100)
文摘Propagation characterization is one of the main building blocks for millimetre wave (MMW) communication. The Gaussian beam has attractive features to become a prospective wave form for millimetre radio communication, especially for the utility inside tunnels. A ray tracing method embedded with spectral features of Gaussian beam is employed to analyze mil- limetre wave propagation in a circle tunnel in this paper. In consideration of geometrical figure of the tunnel, the superposition behaviour of direct and reflective beams is analyzed via simplified approximation of Gaussian beam spectral feature. Then the propagation models are established to derive amplitude, phase, and delay spread of received wave. A typical straight tunnel model is used to simulate the propagation behaviour, where strong multi-path effect with deeply fading of signal intensity and dramatically enhancing of delay spread emerges. For investigation of the spectral feature of the multi-path effect, a reflection loss of 14 dB is taken into consideration at a designated point. To analyze the influences of frequency and transmission distance, the propagation characteristics at three different frequencies of 45 GHz, 65 GHz and 85 GHz are compared with the beam travelling down the tunnel. In addition, three different reflection losses of 14 dB, 20 dB, and 26 dB at the frequency of 65 GHz are also investigated to research the influence of the reflecting coefficient.
基金National 863-803 Project of China(No.2002AA834020)
文摘The propagation characteristics of the beam under various initial conditions are in-vestigated by means of PIC method.The influences of density modulation and velocity modulationon the propagation characteristics are discussed and compared.The results reveal that by chang-iug the amplitude of the two kinds of modulations and the phase difference between them,the
基金supported by the National Natural Science Foundation of China under Grant 51325703,51377094Fund of the National Priority Basic Research of China(2011CB209403)。
文摘Rapid developments in EHV/UHV transmission systems require a deeper understanding of the mechanism of long air gap discharge.Leader propagation is one of the main processes in long gap breakdown.In this paper,the leader propagation characteristics of real size±800 kV UHVDC transmission tower gaps under positive switching impulse voltages(185/2290μs)are investigated.An integrated observation platform consisting of an impulse voltage divider,a coaxial shunt,a high-speed video camera,and a set of integrated optical electric field sensors(IOES),is established.The waveforms of impulse voltage,discharge current,electric field variation at specific positions,and time-resolved photographs of discharge morphology are recorded.Axial leader velocity and the relationship between leader advancements and injected charge are obtained.The typical value of leader stable propagation velocity is 1.7–2.2 cm/μs,which varies slightly with the gap length and applied voltage amplitude.The leader velocity in the re-illumination process is much higher,and is seen as varying from 5 cm/μs to 30 cm/μs,with an average value around 10 cm/μs.The charge in leader channel per unit length is 20–40μC/m,which illustrates a near-direct proportion relationship between discharge current and leader velocity.The observed parameters are important for further simulation of the tower gap breakdown processes.
基金National Natural Science Foundation of China(NSFC)(61371030,61571391)National Basic Research Program of China(973 program)(2014CB340005)
文摘Electromagnetic vortices, which describe the orbital angular momentum(OAM) carrying waves with a helical phase front, have recently attracted much interest in a radio frequency domain due to their potential applications in many diverse areas. In an OAM-based scenario, the antenna for OAM mode multiplexing/demultiplexing plays an essential role in controlling the overall system performance. In this paper, we demonstrated theoretically and experimentally an easily realized OAM antenna based on the traveling-wave circular loop structure for efficiently multiplexing/demultiplexing multiple OAM modes; in addition, its general propagation characteristics including the polarization, divergence, and radiation pattern are mathematically analyzed. Schemes for antenna size reduction and various radiation pattern manipulations have also been discussed to realize a more flexible and compact system.
基金supported by National Basic Research Program of China(2012CB921504)Major Program of National Natural Science Foundation of China(51239005)+4 种基金National Natural Science Foundation of China(11404147,11174142)Natural Science Foundation of Jiangsu Province(BK20140519)China Postdoctoral Science Foundation(2015M571672)Research Fund for Advanced Talents of Jiangsu University(11JDG118)Training Project of Young Backbone Teachers of Jiangsu University
文摘The propagation characteristics of laser-generated like-Rayleigh waves in viscoelastic adhesive coating/substrate structures were studied.Considering the viscoelasticity of the coating and substrate,we have established the finite element models in frequency domain for the laser-generated like-Rayleigh waves in the epoxy coating/aluminum substrate,epoxy coating/brass substrate,and epoxy coating/foam substrate structures,respectively.In addition,we have investigated the waveform and propagation characteristics of the like-Rayleigh waves and studied the influences of the coating transparency,coating thickness,coating viscoelasticity,and substrate viscoelasticity on the propagation characteristics of the like-Rayleigh waves.Moreover,we have verified the results by the theoretical phase velocity and attenuation curves.The results show that the coating viscoelasticity induces the attenuation characteristics of the higher frequencies of the like-Rayleigh waves,but has little effect on the lower frequencies,and the substrate viscoelasticity has the influences on both the higher and lower frequencies of the like-Rayleigh waves,especially the lower frequencies.Furthermore,the mode and dispersive characteristics of the like-Rayleigh waves are closely related to the substrates.This study provides a useful theoretical basis for inverting mechanical parameters and evaluating the adhesive quality of the viscoelastic adhesive coating/substrate structures.
文摘In this study, in order to investigate the global climatic oscillations forced by sea surface temperature (SST) anomalies over equatorial central-eastern Pacific, two numerical schemes with different SST distri-butions (normal and anomalous cases) are tested by using a nine-layer global spectral model. Experiment results show that (i) in northern summer, a wave train that is similar to the teleconnection pattern suggested by Nitta (1987) and Huang (1987) in the Northern Hemisphere and another one in the Southern Hemisphere are reproduced; (ii) simulated results suggest that the response of atmosphere in middle-high latitudes of both hemispheres to an anomalous heating source is more sensitive in tropical western Pacific than in equatorial central-eastern Pacific; and (iii) in northern summer, the formation of low-frequency oscillations on monthly (seasonal) time scale results from energy dispersion as well as interactions between eddies and zonal flow; and between eddies.
基金supported by the National Natural Science Foundation of China(60644004)the National Basic Research Program of China(2003CB314901)
文摘Using a full-vector finite-difference time-domain (FDTD) method, this article explores the propagation characteristics of photonic crystal fiber (PCF) theoretically. The dependence of structural parameters on the effective index of the fundamental guided mode, effective index of the fundamental cladding mode, mode field diameter, confinement loss, effective mode area, and chromatic dispersion in PCF have been studied, respectively. The research presents a reference for designing of PCF with a specific purpose.
基金financially supported by the National Key Research and Development Plan of China(Grant No.2018YFC1504902)the National Natural Science Foundation of China(Grant No.52079068)the State Key Laboratory of Hydroscience and Engineering,China(Grant No.2021-KY-04)。
文摘In underground rock engineering,water-bearing faults may be subjected to dynamic loading,resulting in the coupling of hydraulic and dynamic hazards.Understanding the interaction mechanism between the stress waves induced by dynamic loadings and liquid-filled rock joints is therefore crucial.In this study,an auxiliary device for simulating the liquid-filled layer was developed to analyze the dynamic response characteristics of liquid-filled rock joints in laboratory.Granite and polymethyl methacrylate(PMMA)specimens were chosen for testing,and high-amplitude shock waves induced by a split Hopkinson pressure bar(SHPB)were used to produce dynamic loadings.Impact loading tests were conducted on liquid-filled rock joints with different joint inclinations.The energy propagation coefficient and peak liquid pressure were proposed to investigate the energy propagation and attenuation of waves propagating across the joints,as well as the dynamic response characteristics of the liquid in the liquid-filled rock joints.For the inclination angle range considered herein,the experimental results showed that the energy propagation coefficient gently diminished with increasing joint inclination,and smaller coefficient values were obtained for granite specimens compared with PMMA specimens.The peak liquid pressure exhibited a gradually decreasing trend with increasing joint inclination,and the peak pressure for granite specimens was slightly higher than that for PMMA specimens.Overall,this paper may provide a considerably better method for studying liquid-filled rock joints at the laboratory scale,and serves as a guide for interpreting the underlying mechanisms for interactions between stress waves and liquid-filled rock joints.
基金supported by the National Natural Science Foundation of China(No.92167202,61925102,U21B2014,62101069)the National Key R&D Program of China(No.2020YFB1805002)。
文摘In order to support the future digital society,sixth generation(6G)network faces the challenge to work efficiently and flexibly in a wider range of scenarios.The traditional way of system design is to sequentially get the electromagnetic wave propagation model of typical scenarios firstly and then do the network design by simulation offline,which obviously leads to a 6G network lacking of adaptation to dynamic environments.Recently,with the aid of sensing enhancement,more environment information can be obtained.Based on this,from radio wave propagation perspective,we propose a predictive 6G network with environment sensing enhancement,the electromagnetic wave propagation characteristics prediction enabled network(EWave Net),to further release the potential of 6G.To this end,a prediction plane is created to sense,predict and utilize the physical environment information in EWave Net to realize the electromagnetic wave propagation characteristics prediction timely.A two-level closed feedback workflow is also designed to enhance the sensing and prediction ability for EWave Net.Several promising application cases of EWave Net are analyzed and the open issues to achieve this goal are addressed finally.
基金supported by the foundation"China Seawall Safety Risk Zoning and Storm Surge Envelope Diagram"(Grant No.200101061)by the Ministry of Water Resources,China
文摘The form of Boussinesq equation derived by Nwogu (1993) using velocity at an arbitrary distance and surface elevation as variables is used to simulate wave surface elevation changes. In the numerical experiment, water depth was divided into five layers with six layer interfaces to simulate velocity at each layer interface. Besides, a physical experiment was carried out to validate numerical model and study solitary wave propagation.“Water column collapsing”method (WCCM) was used to generate solitary wave. A series of wave gauges around an impervious breakwater were set-up in the flume to measure the solitary wave shoaling, run-up, and breaking processes. The results show that the measured data and simulated data are in good agreement. Moreover, simulated and measured surface elevations were analyzed by the wavelet transform method. It shows that different wave frequencies stratified in the wavelet amplitude spectrum. Finally, horizontal and vertical velocities of each layer interface were analyzed in the process of solitary wave propagation through submerged breakwater.
基金supported by National Natural Science Foundation of China(Nos.U20B2059,62071353,61627901 and 62071348)the Foundation for Innovative Research Groups of the National Natural Science Foundation of China(No.61621005)the Key Laboratory Foundation(No.6142502190203).
文摘The phase shift characteristics reflect the state change of electromagnetic wave in plasma sheath and can be used to reveal deeply the action mechanism between electromagnetic wave and plasma sheath.In this paper,the phase shift characteristics of electromagnetic wave propagation in plasma were investigated.Firstly,the impact factors of phase shift including electron density,collision frequency and incident frequency were discussed.Then,the plasma with different electron density distribution profiles were employed to investigate the influence on the phase shift characteristics.In a real case,the plasma sheath around the hypersonic vehicle will affect and even break down the communication.Based on the hypersonic vehicle model,we studied the electromagnetic wave phase shift under different flight altitude,speed,and attack angle.The results indicate that the phase shift is inversely proportional to the flight altitude and positively proportional to the flight speed and attack angle.Our work provides a theoretical guidance for the further research of phase shift characteristics and parameters inversion in plasma.
基金supported by National Natural Science Foundation of China(No.61821001)Science and Technology Key Project of Guangdong Province,China(2019B010157001)。
文摘Communication in the evaporation duct layer is greatly affected by the variation of meteorological parameters.Based on the experimental result of the radio transmission of the X-band over the Qiongzhou Strait of China,the characteristic of the duct and its influence on the transmission effect is analyzed.The results indicate that the evaporation duct height(EDH)has a negative Spearman’s rank correlation of-0.90 with the relative humidity and a positive correlation coefficient of 0.84 with the wind speed.Based on the Extreme Learning Machine(ELM)network,we proposed a Met-ELM model that can provide efficient support in predicting propagation characteristics at nighttime.The predicted results of the MetELM model are consistent with the measurements;the root-mean-square-error is 1.66 dB,with the correlation coefficient reaching 0.96,while the proportion of mean absolute error less than 2 dB has reached81.41%.The data-derived Met-ELM model shows great accuracy in predicting propagation characteristics at nighttime,which also meets the acceptable requirements for radio wave propagation.
基金supported by the National Key Scientific Research Project (Grant No. 2014 CB953901)the National Natural Science Foundation of China (Grant No. 40975030)+2 种基金the China Special Fund for Meteorological Research in the Public Interest (Grant No. GYHY201406018)the Natural Science Foundation of Guangdong, China (Grant No. 10151027501000101)the Fundamental Research Funds for the Central Universities (Grant Nos. 11lgjc10, 11lgjc13 and 10lgpy13)
文摘Hainan,an island province of China in the northern South China Sea,experienced two sustained rainstorms in October 2010,which were the most severe autumn rainstorms of the past 60 years.From August to October 2010,the most dominant signal of Hainan rainfall was the 10-20-day oscillation.This paper examines the roles of the 10-20-day oscillation in the convective activity and atmospheric circulation during the rainstorms of October 2010 over Hainan.During both rainstorms,Hainan was near the center of convective activity and under the influence of a lower-troposphere cyclonic circulation.The convective center was initiated in the west-central tropical Indian Ocean several days prior to the rainstorm in Hainan.The convective center first propagated eastward to the maritime continent,accompanied by the cyclonic circulation,and then moved northward to the northern South China Sea and South China,causing the rainstorms over Hainan.In addition,the westward propagation of convection from the tropical western Pacific to the southern South China Sea,as well as the propagation farther northward,intensified the convective activity over the northern South China Sea and South China during the first rainstorm.
基金supported by the National Natural Science Foundation of China under (Grant No. 40575027)
文摘Vertical cumulus momentum transport is an important physical process in the tropical atmosphere and plays a key role in the evolution of the tropical atmospheric system. This paper focuses on the impact of the vertical cumulus momentum transport on Madden-Julian Oscillation (MJO) simulation in two global climate models (GCMs). The Tiedtke cumulus parameterization scheme is applied to both GCMs [CAM2 and Spectral Atmospheric general circulation Model of LASG/IAP (SAMIL)]. It is found that the MJO simulation ability might be influenced by the vertical cumulus momentum transport through the cumulus parameterization scheme. However, the use of vertical momentum transport in different models provides different results. In order to improve model's MJO simulation ability, we must introduce vertical cumulus momentum transport in a more reasonable way into models. Furthermore, the coherence of the parameterization and the underlying model also need to be considered.
基金supported by National Natural Science Foundation of China(Nos.11775043,11675095 and 11505020)the Fundamental Research Funds for the Central Universities(No.DUT18LK31)。
文摘A 2D axial symmetry fluid model is applied to study the features of an atmospheric-pressure argon(Ar) plasma jet propagating into ambient nitrogen(N_(2)) driven by a pulsed voltage,emphasizing the influence of gas velocity on the dynamic characteristics of the jet. The results show that the Ar jet exhibits a cylindrical-shaped channel and the jet channel gradually shrinks with the increase in propagation length. The jet propagation velocity varies with time. Inside the dielectric tube, the plasma jet accelerates propagation and reaches its maximum value near the nozzle. Exiting the tube, its velocity quickly decreases and when approaching the metal plane,the decrease in jet velocity slows down. The increase in gas speed results in the variation of jet spatial distribution. The electron density presents a solid structure at lower gas flow speeds,whereas an annular structure can be observed under the higher gas flow velocity in the ionization head. The jet length increases with the flow velocity. However, when the flow velocity exceeds a critical value, the increase in the rate of the plasma jet length slows down. In addition, the gas velocity effect on the generation and transport of the reactive particles is also studied and discussed.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11834003 and 91836103).
文摘We report the generation of a crossed,focused,optical vortex beam by using a pair of hybrid holograms,which combine the vortex phase and lens phase onto a spatial light modulator.We study the intensity distributions of the vortex beam in free propagation space,and the relationship of its dark spot size with the incident Gaussian beam’s waist,the lens’s focal length,and its orbital angular momentum.Our results show that the crossed,focused,vortex beam’s dark spot size can be as small as 16.3μm and adjustable by the quantum number of the orbital angular momentum,and can be used to increase the density of trapped molecules.Furthermore,we calculate the optical potential of the blue-detuned,crossed vortex beam for MgF molecules.It is applicable to cool and trap neutral molecules by intensity-gradient-induced Sisyphus cooling,as the intensity gradient of such vortex beam is extremely high near the focal point.