A method for the treatment of hazardous waste drilling fluids,potentially leading to environmental pollution,is considered.The waste drilling fluid is treated with an inorganic flocculant,an organic flocculant,and a p...A method for the treatment of hazardous waste drilling fluids,potentially leading to environmental pollution,is considered.The waste drilling fluid is treated with an inorganic flocculant,an organic flocculant,and a pH regulator.The profile control agent consists of partially hydrolyzed polyacrylamide,formaldehyde,hexamethylenetetramine,resorcinol,phenol,and the treated waste drilling fluid itself.For a waste drilling fluid concentration of 2500 mg/L,the gelling time of the profile control agent is 25 h,and the gelling strength is 32,000 mPa.s.Compared with the profile control agent prepared by recirculated water under the same conditions,the present profile control agent displays better stability,salt-resistance,and performance.展开更多
Advances in technology require upgrades in the law. One such area involves data brokers, which have thus far gone unregulated. Data brokers use artificial intelligence to aggregate information into data profiles about...Advances in technology require upgrades in the law. One such area involves data brokers, which have thus far gone unregulated. Data brokers use artificial intelligence to aggregate information into data profiles about individual Americans derived from consumer use of the internet and connected devices. Data profiles are then sold for profit. Government investigators use a legal loophole to purchase this data instead of obtaining a search warrant, which the Fourth Amendment would otherwise require. Consumers have lacked a reasonable means to fight or correct the information data brokers collect. Americans may not even be aware of the risks of data aggregation, which upends the test of reasonable expectations used in a search warrant analysis. Data aggregation should be controlled and regulated, which is the direction some privacy laws take. Legislatures must step forward to safeguard against shadowy data-profiling practices, whether abroad or at home. In the meantime, courts can modify their search warrant analysis by including data privacy principles.展开更多
The term ‘profile machining’ is used to refer to the milling of vertical surfaces described by profile curves. Profile machining requires higher precision (1/1000 mm) than regular 3D machining (1/100 mm) with the er...The term ‘profile machining’ is used to refer to the milling of vertical surfaces described by profile curves. Profile machining requires higher precision (1/1000 mm) than regular 3D machining (1/100 mm) with the erosion of sharp vertices should being especially avoided. Although, profile machining is very essential for making trimming and flange dies, it seldom brought into focus. This paper addresses the technological requirements of profile machining including machining width and depth control, minimizing toolware, and protecting sharp vertices. Issues of controller alarms are also addressed.展开更多
To protect the sustainability of the benefits from seas and near coastal areas,which have under the effect of the very complex hydrodynamic conditions and intensive human activities,without disrupting the balance of n...To protect the sustainability of the benefits from seas and near coastal areas,which have under the effect of the very complex hydrodynamic conditions and intensive human activities,without disrupting the balance of nature,it is necessary to image the status of the seafloor features.Therefore,this study presents the deformations,depositional conditions,underwater constructions,and the other non-natural impacts on the seafloor of the nearshore area at western Istanbul(between Küçükçekmece and Büyükçekmece lagoons)where it intensely used by the citizens.The results of the study may provide some guidance for understanding the impacts and risk factors of uses that are or will be conducted in coastal and/or near-coastal areas.Construction planning for civil coastal structures and areas should be done in great harmony with nature,minimizing negative environmental impacts.Although sediment distribution in the area is generally quite complex,the current state of the region,wave action,hydrodynamic conditions,the amount of material transported from the land,and bathymetry are important influencing factors.The seafloor has been damaged primarily by anchor deformation and associated bottom scanning,as well as disturbing trawl tracks.The seafloor was observed as partially shallowing near the constructions(such as natural gas pipelines,fishermen’s shelter,and port piles)of coastal areas and associated with sand deposits.Therefore,scanning the seafloor using side-scan sonar may provide valuable frequency data to prevent future disruptions.展开更多
The active-fault-alarm （AFA） technologies and the dynamic protection mechanism of the optical network controlled by the multi-protocol label switching transport profile （MPLS-TP） are both studied in this article. ...The active-fault-alarm （AFA） technologies and the dynamic protection mechanism of the optical network controlled by the multi-protocol label switching transport profile （MPLS-TP） are both studied in this article. On this basis, an active dynamic pre-protection （ADPP） mechanism is proposed. This active dynamic pre-protection mechanism is allowed to establish a so called temporary protection path （TPP） for the work path before a potential fault occurs and to switch to TPP only after the fault occurs. It keeps the TPP flexibly only when it is in low- quality or fault state to realize dynamic protection even better and to achieve better resource utilization. Simulation results show that the proposed new mechanism has better performance in terms of the flexibility and the efficiency from the perspective of time.展开更多
安全防护设计是结构设计中需考虑的关键问题,进行极限工况下膜式空气弹簧(Rolling Lobe Air Spring,PLAS)的力学特性研究可为开展其安全保护设计奠定重要基础。计及橡胶气囊外径随弹簧高度变化影响,考虑圆弧段半径、直线段内锥角等关键...安全防护设计是结构设计中需考虑的关键问题,进行极限工况下膜式空气弹簧(Rolling Lobe Air Spring,PLAS)的力学特性研究可为开展其安全保护设计奠定重要基础。计及橡胶气囊外径随弹簧高度变化影响,考虑圆弧段半径、直线段内锥角等关键设计参量,建立了具有安全保护设计的膜式空气弹簧力学特性模型。试验结果表明,膜式空气弹簧结构参数最大相对误差为11.9%,极限工况时不同压强下静刚度相对误差均小于11%,承载力最大相对误差均小于6%,证明了所建立RLAS力学特性模型的正确性。进一步提出以力增益、刚度增益作为安全保护设计的量化表征指标,探明了极限工况下关键设计参量对RLAS力学特性、量化表征指标的影响规律。研究结果为设计阶段准确计算RLAS的安全保护能力提供了理论支撑。展开更多
文摘A method for the treatment of hazardous waste drilling fluids,potentially leading to environmental pollution,is considered.The waste drilling fluid is treated with an inorganic flocculant,an organic flocculant,and a pH regulator.The profile control agent consists of partially hydrolyzed polyacrylamide,formaldehyde,hexamethylenetetramine,resorcinol,phenol,and the treated waste drilling fluid itself.For a waste drilling fluid concentration of 2500 mg/L,the gelling time of the profile control agent is 25 h,and the gelling strength is 32,000 mPa.s.Compared with the profile control agent prepared by recirculated water under the same conditions,the present profile control agent displays better stability,salt-resistance,and performance.
文摘Advances in technology require upgrades in the law. One such area involves data brokers, which have thus far gone unregulated. Data brokers use artificial intelligence to aggregate information into data profiles about individual Americans derived from consumer use of the internet and connected devices. Data profiles are then sold for profit. Government investigators use a legal loophole to purchase this data instead of obtaining a search warrant, which the Fourth Amendment would otherwise require. Consumers have lacked a reasonable means to fight or correct the information data brokers collect. Americans may not even be aware of the risks of data aggregation, which upends the test of reasonable expectations used in a search warrant analysis. Data aggregation should be controlled and regulated, which is the direction some privacy laws take. Legislatures must step forward to safeguard against shadowy data-profiling practices, whether abroad or at home. In the meantime, courts can modify their search warrant analysis by including data privacy principles.
文摘The term ‘profile machining’ is used to refer to the milling of vertical surfaces described by profile curves. Profile machining requires higher precision (1/1000 mm) than regular 3D machining (1/100 mm) with the erosion of sharp vertices should being especially avoided. Although, profile machining is very essential for making trimming and flange dies, it seldom brought into focus. This paper addresses the technological requirements of profile machining including machining width and depth control, minimizing toolware, and protecting sharp vertices. Issues of controller alarms are also addressed.
文摘To protect the sustainability of the benefits from seas and near coastal areas,which have under the effect of the very complex hydrodynamic conditions and intensive human activities,without disrupting the balance of nature,it is necessary to image the status of the seafloor features.Therefore,this study presents the deformations,depositional conditions,underwater constructions,and the other non-natural impacts on the seafloor of the nearshore area at western Istanbul(between Küçükçekmece and Büyükçekmece lagoons)where it intensely used by the citizens.The results of the study may provide some guidance for understanding the impacts and risk factors of uses that are or will be conducted in coastal and/or near-coastal areas.Construction planning for civil coastal structures and areas should be done in great harmony with nature,minimizing negative environmental impacts.Although sediment distribution in the area is generally quite complex,the current state of the region,wave action,hydrodynamic conditions,the amount of material transported from the land,and bathymetry are important influencing factors.The seafloor has been damaged primarily by anchor deformation and associated bottom scanning,as well as disturbing trawl tracks.The seafloor was observed as partially shallowing near the constructions(such as natural gas pipelines,fishermen’s shelter,and port piles)of coastal areas and associated with sand deposits.Therefore,scanning the seafloor using side-scan sonar may provide valuable frequency data to prevent future disruptions.
基金Supported by the National High Technology Research and Development Program of China（No. 2009AA01Z255, 2009AA01A345）, the National Basic Research Program of China（No. 2007CB310705 ） and the National Natural Science Foundation of China（No. 60932004）.
文摘The active-fault-alarm （AFA） technologies and the dynamic protection mechanism of the optical network controlled by the multi-protocol label switching transport profile （MPLS-TP） are both studied in this article. On this basis, an active dynamic pre-protection （ADPP） mechanism is proposed. This active dynamic pre-protection mechanism is allowed to establish a so called temporary protection path （TPP） for the work path before a potential fault occurs and to switch to TPP only after the fault occurs. It keeps the TPP flexibly only when it is in low- quality or fault state to realize dynamic protection even better and to achieve better resource utilization. Simulation results show that the proposed new mechanism has better performance in terms of the flexibility and the efficiency from the perspective of time.
文摘安全防护设计是结构设计中需考虑的关键问题,进行极限工况下膜式空气弹簧(Rolling Lobe Air Spring,PLAS)的力学特性研究可为开展其安全保护设计奠定重要基础。计及橡胶气囊外径随弹簧高度变化影响,考虑圆弧段半径、直线段内锥角等关键设计参量,建立了具有安全保护设计的膜式空气弹簧力学特性模型。试验结果表明,膜式空气弹簧结构参数最大相对误差为11.9%,极限工况时不同压强下静刚度相对误差均小于11%,承载力最大相对误差均小于6%,证明了所建立RLAS力学特性模型的正确性。进一步提出以力增益、刚度增益作为安全保护设计的量化表征指标,探明了极限工况下关键设计参量对RLAS力学特性、量化表征指标的影响规律。研究结果为设计阶段准确计算RLAS的安全保护能力提供了理论支撑。
