Towards electrochemical hydrogen storage in liquid organic hydrogen carriers via proton-coupled electron transfers

Green hydrogen is identified as one of the prime clean energy carriers due to its high energy density and a zero emission of CO_(2).A possible solution for the transport of H_(2)in a safe and low-cost way is in the form of liquid organic hydrogen carriers(LOHCs).As an alternative to loading LOHC with H_(2)via a two-step procedure involving preliminary electrolytic production of H_(2)and subsequent chemical hydrogenation of the LOHC,we explore here the possibility of electrochemical hydrogen storage(EHS)via conversion of proton of a proton donor into a hydrogen atom involved in covalent bonds with the LOHC(R)via a protoncoupled electron transfer(PCET)reaction:2nH^(+)+2ne^(-)+Rox■n H_(2)^(0)Rred.We chose 9-fluorenone/fluorenol(Fnone/Fnol)conversion as such a model PCET reaction.The electrochemical activation of Fnone via two sequential electron transfers was monitored with in-situ and operando spectroscopies in absence and in presence of different alcohols as proton donors of different reactivity,which enabled us to both quantify and get the mechanistic insight on PCET.The possibility of hydrogen extraction from the loaded carrier molecule was illustrated by chemical activation.

Trinuclear Nickel Catalyst for Water Oxidation:Intramolecular Proton-Coupled Electron Transfer Triggered Trimetallic Cooperative O-O Bond Formation

We report a molecular trinuclear nickel(TNC-Ni)catalyst for water oxidation that exhibited high catalytic performance and stability under neutral conditions(pH 7).Electrochemical studies disclosed that cooperation among the three nickel sites plays a vital role in both charge accumulation and O-O bond formation.This TNC-Ni catalyst could accomplish 4e−oxidation of water by involving all three nickel sites and the O-O bond formation was triggered by a charge distribution process from 5 to 5_(dp) via proton-coupled electron transfer.

P-induced electron transfer interaction for enhanced selective hydrogenation rearrangement of furfural to cyclopentanone

Optimizing the intrinsic activity of non-noble metal by precisely tailoring electronic structure offers an appealing way to construct cost-effective catalysts for selective biomass valorization.Herein,we reported a P-doping bifunctional catalyst(Ni-P/mSiO_(2))that achieved 96.6%yield for the hydrogenation rearrangement of furfural to cyclopentanone at mild conditions(1 MPaH_(2),150°C).The turnover frequency of Ni-P/mSiO_(2)was 411.9 h^(-1),which was 3.2-fold than that of Ni/mSiO_(2)(127.2 h^(-1)).Detailed characterizations and differential charge density calculations revealed that the electron-deficient Niδ+species were generated by the electron transfer from Ni to P,which promoted the ring rearrangement reaction.Density functional theory calculations illustrated that the presence of P atoms endowed furfural tilted adsorb on the Ni surface by the C=O group and facilitated the desorption of cyclopentanone.This work unraveled the connection between the localized electronic structures and the catalytic properties,so as to provide a promising reference for designing advanced catalysts for biomass valorization.

Advancements in transfer printing techniques for flexible electronics:adjusting interfaces and promoting versatility

The burgeoning interest in flexible electronics necessitates the creation of patterning technology specifically tailored for flexible substrates and complex surface morphologies.Among a variety of patterning techniques,transfer printing emerges as one of the most efficient,cost-effective,and scalable methods.It boasts the ability for high-throughput fabrication of 0–3D micro-and nano-structures on flexible substrates,working in tandem with traditional lithography methods.This review highlights the critical issue of transfer printing:the flawless transfer of devices during the pick-up and printing process.We encapsulate recent advancements in numerous transfer printing techniques,with a particular emphasis on strategies to control adhesion forces at the substrate/device/stamp interfaces.These strategies are employed to meet the requirements of competing fractures for successful pick-up and print processes.The mechanism,advantages,disadvantages,and typical applications of each transfer printing technique will be thoroughly discussed.The conclusion section provides design guidelines and probes potential directions for future advancements.

Analysis of the electron transfer pathway in small laccase by EPR and UV-vis spectroscopy coupled with redox titration

Bacterial small laccases(SLAC) are promising industrial biocatalysts due to their ability to oxidize a broad range of substrates with exceptional thermostability and tolerance for alkaline p H. Electron transfer between substrate, copper centers, and O2is one of the key steps in the catalytic turnover of SLAC. However, limited research has been conducted on the electron transfer pathway of SLAC and SLAC-catalyzed reactions, hindering further engineering of SLAC to produce tunable biocatalysts for novel applications. Herein, the combinational use of electron paramagnetic resonance(EPR) and ultraviolet-visible(UV-vis) spectroscopic methods coupled with redox titration were employed to monitor the electron transfer processes and obtain further insights into the electron transfer pathway in SLAC. The reduction potentials for type 1 copper(T1Cu), type 2 copper(T2Cu) and type 3copper(T3Cu) were determined to be 367 ± 2 mV, 378 ± 5 m V and 403 ± 2 mV,respectively. Moreover, the reduction potential of a selected substrate of SLAC, hydroquinone(HQ), was determined to be 288 mV using cyclic voltammetry(CV). In this way, an electron transfer pathway was identified based on the reduction potentials. Specifically,electrons are transferred from HQ to T1Cu, then to T2Cu and T3Cu, and finally to O2.Furthermore, superhyperfine splitting observed via EPR during redox titration indicated a modification in the covalency of T2Cu upon electron uptake, suggesting a conformational alteration in the protein environment surrounding the copper sites, which could potentially influence the reduction potential of the copper sites during catalytic processes. The results presented here not only provide a comprehensive method for analyzing the electron transfer pathway in metalloenzymes through reduction potential measurements, but also offer valuable insights for further engineering and directed evolution studies of SLAC in the aim for biotechnological and industrial applications.

Balancing electron transfer and intermediate adsorption ability of metallic Ni-Fe-RE-P bifunctional catalysts via 4f-2p-3d electron interaction for enhanced water splitting

Balancing electron transfer and intermediate adsorption ability of bifunctional catalysts via tailoring electronic structures is crucial for green hydrogen production,while it still remains challenging due to lacking efficient strategies.Herein,one efficient and universal strategy is developed to greatly regulate electronic structures of the metallic Ni-Fe-P catalysts via in-situ introducing the rare earth(RE)atoms(Ni-Fe-RE-P,RE=La,Ce,Pr,and Nd).Accordingly,the as-prepared optimal Ni-Fe-Ce-P/CC self-supported bifunctional electrodes exhibited superior electrocatalytic activity and excellent stability with the low overpotentials of 247 and 331 mV at 100 mA cm^(-2) for HER and OER,respectively.In the assembled electrolyzer,the Ni-Fe-Ce-P/CC as bifunctional electrodes displayed low operation potential of 1.49 V to achieve a current density of 10 mA cm^(-2),and the catalytic performance can be maintained for 100 h.Experimental results combined with density functional theory(DFT)calculation reveal that Ce doping leads to electron decentralization and crystal structure distortion,which can tailor the band structures and d-band center of Ni-Fe-P,further increasing conductivity and optimizing intermediate adsorption energy.Our work not only proposes a valuable strategy to regulate the electron transfer and intermediate adsorption of electrocatalysts via RE atoms doping,but also provides a deep under-standing of regulation mechanism of metallic electrocatalysts for enhanced water splitting.

An active learning workflow for predicting hydrogen atom adsorption energies on binary oxides based on local electronic transfer features

Machine learning combined with density functional theory(DFT)enables rapid exploration of catalyst descriptors space such as adsorption energy,facilitating rapid and effective catalyst screening.However,there is still a lack of models for predicting adsorption energies on oxides,due to the complexity of elemental species and the ambiguous coordination environment.This work proposes an active learning workflow(LeNN)founded on local electronic transfer features(e)and the principle of coordinate rotation invariance.By accurately characterizing the electron transfer to adsorption site atoms and their surrounding geometric structures,LeNN mitigates abrupt feature changes due to different element types and clarifies coordination environments.As a result,it enables the prediction of^(*)H adsorption energy on binary oxide surfaces with a mean absolute error(MAE)below 0.18 eV.Moreover,we incorporate local coverage(θ_(l))and leverage neutral network ensemble to establish an active learning workflow,attaining a prediction MAE below 0.2 eV for 5419 multi-^(*)H adsorption structures.These findings validate the universality and capability of the proposed features in predicting^(*)H adsorption energy on binary oxide surfaces.

Fe-lnduced Electronic Transfer and Structural Evolution of Lotus Pod-Like CoNiFeP_(x)@P,N-C Heterostructure for Sustainable Oxygen Evolution

Transition metal phosphides with metallic properties are a promising candidate for electrocatalytic water oxidation,and developing highly active and stable metal phosphide-based oxygen evolution reaction catalysts is still challenging.Herein,we present a facile ion exchange and phosphating processes to transform intestine-like CoNiP_(x)@P,N-C into lotus pod-like CoNiFeP_(x)@P,N-C heterostructure in which numerous P,N-codoped carboncoated CoNiFeP_(x)nanoparticles tightly anchors on the 2D carbon matrix.Meanwhile,the as-prepared CoNiFeP_(x)@P,N-C enables a core-shell structure,high specific surface area,and hierarchical pore structure,which present abundant heterointerfaces and fully exposed active sites.Notably,the incorporation of Fe can also induce electron transfer in CoNiP_(x)@P,IM-C,thereby promoting the oxygen evolution reaction.Consequently,CoNiFeP_(x)@P,IM-C delivers a low overpotential of 278 mV(vs RHE)at a current density of10 mA cm^(-1)and inherits excellent long-term stability with no observable current density decay after 30 h of chronoamperometry test.This work not only highlights heteroatom induction to tune the electronic structure but also provides a facile approach for developing advanced and stable oxygen evolution reaction electrocatalysts with abundant heterointerfaces.

The surface electron transfer strategy promotes the hole of PDI release and enhances emerging organic pollutant degradation

In semiconductor photocatalysts,the easy recombination of photogenerated carriers seriously affects the application of photocatalytic materials in water treatment.To solve the serious problem of electron−hole pair recombination in perylene diimide(PDI)organic semiconductors,we loaded ferric hydroxyl oxide(FeOOH)on PDI materials,successfully prepared novel FeOOH@PDI photocatalytic materials,and constructed a photo-Fenton system.The system was able to achieve highly efficient degradation of BPA under visible light,with a degradation rate of 0.112 min^(−1)that was 20 times higher than the PDI system,and it also showed universal degradation performances for a variety of emerging organic pollutants and anti-interference ability.The mechanism research revealed that the FeOOH has the electron trapping property,which can capture the photogenerated electrons on the surface of PDI,effectively reducing the compounding rate of photogenerated carriers of PDI and accelerating the iron cycling and H2O2 activation on the surface of FeOOH at the same time.This work provides new insights and methods for solving the problem of easy recombination of carriers in semiconductor photocatalysts and degrading emerging organic pollutants.

Influence of dye molecular structure on electron transfer in 2,9,16,23-tetracarboxy zinc phthalocyanine sensitized solar cell

2, 9, 16, 23-tetracarboxy zinc phthalocyanine （ZnTCPc） is synthesized and characterized by physicochemical and theoretical methods and it is used as a photosensitizer in dye-sensitized solar cells （DSSC）. The excited lifetime, band gap and frontier orbital distribution of ZnTCPc are investigated by fluorescence spectra, cyclic voltammetry and quantum calculation. The results show that the excited lifetime and band gap are 0. 1 ns and 1.81 eV, respectively. Moreover, it is found that the highest occupied molecular orbital （HOMO） location is not shared by both the zinc metal and the isoindoline ligands, and the lowest unoccupied molecular orbital（LUMO） location does not strengthen the interaction coupling between ZnTCPc and TiO：. As a result, the ZnTCPc-DSSC gains a short-circuit current density of 0. 147 mA/cm2, an open-circuit photovoltage of 277 mV, a fill factor of 0. 51 and an overall conversion efficiency of 0. 021%.

Theoretical Studies on the Mechanism of the Proton-transfer-coupled Electron Transfer Reactions Between Menaquinone Q_A and Ubiquinone Q_B in the Bacterial Photosynthetic Reaction Center of Rhodopseudomona viridis

The mechanism of the proton_transfer_coupled electron transfer (PT_ET) reactions between the menaquinone Q A (MQ 1) and ubiquinone Q B (UQ 1) in the bacterial photosynthetic reaction center of Rhodopseudomona viridis was studied by using the B3LYP/6_31G(d) method. The changes of standard Gibbs free energy ΔG 0 of all possible reactions followed the ET reaction (1) were calculated. The results indicated that: (1) according to the ΔG 0 values of corresponding reactions, UQ 1 could not accept two electrons from MQ - 1 continually without the coupled proton transfer reactions. Because of ΔG 0 2b 0, ΔG 0 3b 0 and ΔG 0 4b 0, the corresponding PT_ET reactions could take place along with reactions (2b), (3b) and (4b) sequentially; (2) on the gaseous condition, the first and second transferred protons (H +(1) and H +(2)) from the surrounding amino acid residues or water molecules will combine with the oxygen No.7 and oxygen No.8 of UQ 1, respectively. On the condition of protein surroundings (by SCRF model, ε =4.0), the results are converse but the energy difference between the combination of H +(1) and H +(2) with UQ - 1 is quite small. The difference of ΔG 0 values between the corresponding reactions in gaseous surroundings and the SCRF model is not significant; (3) the PT_ET reactions between MQ 1 - and UQ 1 - should be as follows: MQ 1 -+UQ 1→MQ 1+UQ 1 - (1) UQ 1 - ( O (7) )+H +( HisL 190)→UQ 1H(2b) ( Gas ) or UQ 1 - ( O (8) )+H +(H 2O)→UQ 1H (2b') ( SCRF ) or UQ 1 - ( O (8) )+H + ( ArgL 217)→UQ 1H(2b') ( SCRF ) MQ 1 -+UQ 1H→MQ 1+UQ 1H - (3b) ( Gas ) MQ 1 -+UQ 1H→MQ 1+UQ 1H -(3b') ( SCR F) UQ 1H -+H +(H 2O)→UQ 1H 2(4b) ( Gas ) or UQ 1H -+H + ( ArgL 217)→UQ 1H 2 (4b) ( Gas ) or UQ 1H -+H + ( HisL 190)→UQ 1H 2 (4b') ( SCRF )

Effects of Membrane Lipids on the Electron Transfer Activity of Cytochrome b_6f Complex from Spinach

A lipid_depleted cytochrome b 6f (Cyt b 6f) preparation was obtained from spinach (Spinacia oleracea L.) chloroplasts. Upon reconstitution of this preparation with the membrane lipids purified from spinach thylakoid, the effects of different membrane lipids on the electron transfer activity were studied. The results show that the electron transfer activity of Cyt b 6f is obviously stimulated to different extents, respectively, by monogalactosyldiacylglycerol (MGDG), digalactosyldiacylglycerol (DGDG), phosphatidylcholine (PC), phosphatidylglycerol (PG) and sulfoquinovosyldiacylglycerol (SQDG), and that the extents of stimulation may be closely related to the charge of the membrane lipids. The stimulation of non_charged lipids (MGDG, DGDG) and neutrally_charged lipid (PC) was high with a maximum enhancement of 89%, 75% and 77%, respectively; but the stimulation of two kinds of negatively_charged lipid (PG and SQDG) was relatively low with a maximum enhancement of 43% and 26%, respectively.

Photochemical Hydrogen Abstraction and Electron Transfer Reactions of Tetrachlorobenzoquinone with Pyrimidine Nucleobases

Pentachlorophenol, a widespread environmental pollutant that is possibly carcinogenic to humans, is metabolically oxidized to tetrachloroquinone （TCBQ） which can result in DNA damage. We have investigated the photochemical reaction dynamics of TCBQ with two pyrimidine type nucleobases （thymine and uracil） upon UVA （355 ran） excitation using the technique of nanosecond time-resolved laser flash photolysis. It has been found that 355 nm excitation populates TCBQ molecules to their triplet state 3TCBQ＊, which are highly reactive towards thymine or uracil and undergo two parallel reactions, the hydrogen abstraction and electron transfer, leading to the observed photoproducts of TCBQH. and TCBQ.- in transient absorption spectra. The concomitantly produced nucleobase radicals and radical cations are expected to induce a series of oxidative or strand cleavage damage to DNA afterwards. By characterizing the photochemical hydrogen abstraction and electron transfer reactions, our results provide potentially important molecular reaction mechanisms for understanding the carcinogenic effects of pentachlorophenol and its metabolites TCBQ.

Improved kinetics of OER on Ru-Pb binary electrocatalyst by decoupling proton-electron transfer

The acidic oxygen evolution reaction(OER)is central to water electrolysis using proton‐exchange membranes.However,even as benchmark catalysts in the acidic OER,Ru‐based catalysts still suffer from sluggish kinetics owing to the scaling relationship that arises from the traditional concerted proton‐electron transfer(CPET)process.Motivated by the knowledge that a charged surface may be favorable for accelerating the OER kinetics,we posited the incorporation of elements with pseudocapacitive properties into Ru‐based catalysts.Herein,we report a RuPbOx electrocatalyst for efficient and stable water oxidation in acid with a low overpotential of 191 mV to reach 10 mA cm^(−2) and a low Tafel slope of 39 mV dec^(−1).The combination of electrochemical analysis,X‐ray photoelectron spectroscopy,and in situ Raman spectroscopy demonstrated that the improved OER kinetics was associated with the formation of superoxide precursors on the strongly charged surface after Pb incorporation,indicating a non‐concerted proton‐electron transfer mechanism for the OER on RuPbOx.

A high H_2 evolution rate under visible light of a CdS/TiO_2@Ni S catalyst due to a directional electron transfer between the phases

The photocatalytic activity of CdS can be greatly improved by co-modification of NiS and TiO_2 materials; furthermore the order of connection affects much. A directional electron transfer route via CdS → TiO_2→ NiS is found crucial to the enhancement of ternary catalyst, where TiO_2 acts as an electron reservoir and Ni S works as an effective cocatalyst. Cd S/TiO_2@Ni S with Ni S loaded on TiO_2 has an activity of H_2 evolution 2.5 times higher than NiS@Cd S/TiO_2 with Ni S pre-loaded on Cd S. Faster e-/h+separation rates is obtained of Cd S/TiO_2@Ni S under visible light than under extra UV light irradiation, which in turn demonstrates the importance of directional electron transfer route.

Analysis of metal transfer during electron beam welding with filler wire

The metal transfer mode of electron beam welding （EBW） with filler wire was studied experimentally. The spatial position between the electron beam and the filler wire was defined. Basing on the charge coupled device （CCD） visual sensing system, the metal transfer mode of filler wire was investigated. The results showed that there were five transfer modes during EBW process due to different wire feed rates and spatial positions between beam and filler wire, such as short-circuiting mode, molten metal bridge mode, small droplet mode, big droplet mode and mixed mode. By comparing the weld appearance of different transfer modes, the molten metal bridge transfer was proved to be the best transfer mode.

Electrons Transfer Between Mercaptoacetic Acid and ZnO Nanocrystal Thin Film

ZnO nanoorystals thin film were prepared by means of the self-assembly mothed. The complex films of mercaptoacetic acid(MPA) and ZnO nanocrystals(ZNCs) were prepared by means of the self-assembly technique. The interaction between the MPA and ZnO within the MPA and ZnO nanocrystal thin film decreases the photoluminescence intensity of the ZnO. The interaction was manifested by the X-ray photoelectron spectra. The intensity change of the photoluminescence of the ZnO is discussed on the basis of taking into account the process of electron transfer on the interface between the ZnO and MPA. The electron transfer of ZnO depends on the distance between the ZnO and MPA.

Near Resonant Electronic and Rotational Energy Transfer AB（^1∏, J）＋C（^slj）→AB（^1∏, J＇）＋C（^sl j＇）

In our previous theoretical study, the theoretical model of thecollision-induced electronic and rotational energy transfer of AB(~1Σ, J) + C(~sl_j) → AB(~1Σ,J′) + C(~sl_(j′)) was presented. To further study the collision-induced electronic and rotationalenergy transfer theoretically on AB( ~1Π, J) + C(~sl_j) → AB( ~1Π, J′) + C(~sl_(j′)), atheoretical model is presented, based on the time-dependent first-order Born approximation, takinginto account the anisotropic Lennard-Jones interaction potential and 'straight-line' trajectoryapproximation. The changing tendency of the transitional probabilities with the anisotropicparameter is discussed.

Enhancing the dynamic electron transfer of Au species on wormhole-like TS-1 for boosting propene epoxidation performance with H_(2) and O_(2)

Engineering unique electronic structure of catalyst to boost catalytic performance is of prime scientific and industrial importance.Herein,the identification of intrinsic electronic sensitivity for direct propene epoxidation was first achieved over highly stable Au/wormhole-like TS-1 catalyst.Results show that the electron transfer of Au species can be regulated by manipulating the dynamic evolutions and contents of Au valence states,thus resulting in different catalytic performance in 100 h time-on-stream.By DFT calculations,kinetic analysis and multicharacterizations,it is found that the Au^(0) species with higher electronic population can easily transfer more electrons to activate surface O_(2) compared with Au^(1+) and Au^(3+) species.Moreover,there is a positive correlation between Au^(0) content and activity.Based on this correlation,a facile strategy is further proposed to boost Au^(0) percentage,resulting in the reported highest PO formation rate without adding promoters.This work harbors tremendous guiding significance to the design of highly efficient Au/Ti-containing catalyst for propene epoxidation with H_(2) and O_(2).

Carbon dots regulate the interface electron transfer and catalytic kinetics of Pt-based alloys catalyst for highly efficient hydrogen oxidation

The regulation of interface electron-transfer and catalytic kinetics is very important to design the efficient electrocatalyst for alkaline hydrogen oxidation reaction(HOR).Here,we show the Pt-Ni alloy nanoparticles(PtNi_(2))have an enhanced HOR activity compared with single component Pt catalyst.While,the interface electron-transfer kinetics of PtNi_(2)catalyst exhibits a very wide electron-transfer speed distribution.When combined with carbon dots(CDs),the interface charge transfer of PtNi_(2)-CDs composite is optimized,and then the PtNi_(2)-5 mg CDs exhibits about 2.67 times and 4.04 times higher mass and specific activity in 0.1 M KOH than that of 20%commercial Pt/C.In this system,CDs also contribute to trapping H^(+)and H_(2)O generated during HOR,tuning hydrogen binding energy(HBE),and regulating interface electron transfer.This work provides a deep understanding of the interface catalytic kinetics of Pt-based alloys towards highly efficient HOR catalysts design.