Effect of Polishing Procedure on the Roughness and Bacterial Adhesion of Provisional Restorative Materials

Provisional prosthetic restoration materials are exposed to oral cavity producing on the surface biofilm where different factors such as surface roughness and porosity can condition their formation and organization and can create stagnation areas that promote the bonding of organic particles, thus facilitating the formation and maturation of the biofilm. The purpose of this study was to compare surface roughness of two provisional prosthetic restorations materials and their bacterial susceptibility. In this study, two provisional restoration materials were used in two groups, A polymethyl methacrylate acrylic (NicTone MDC DENTAL) and B bis-acryl resin (Protemp 4 ESPE 3M). A total of 80 samples (40 samples of each material) were in thick plates of 10 × 10 mm and 2 mm high. 20 samples of each material were polished, while 20 were left unpolished. Subsequently, the samples were observed by Atomic Force Microscopy for their evaluation of surface roughness. The values were analyzed with t-test, Mann-Whitney U test and Kruskal Wallis test. The samples were microbiologically inoculated with the strains obtained and identified from a provisional polymethyl methacrylate acrylic restoration in a patient, in order to observe bacterial adhesion using a Scanning Electron Microscope. Two strains, Enterococcus faecalis and Pseudomona luteola, were identified. The presence of the microorganisms was observed on the surface of both materials, either polished or unpolished, with a lower level of microorganism adhesion found on the bis-acrylic resin. There was a significant difference about surface roughness in the groups A and B with p -8). We found that the polished bis-acrylic resin showed lower surface roughness and bacterial adhesion in comparison with the polymethyl methacrylate.

The Basilica of Santa Maria di Collemaggio in L＇Aquila： Modern Provisional Measures

The case in analysis is Santa Maria di Collemaggio, the church symbol of the town of L＇Aquila and the most important example of Romanesque style in Abruzzi, tragically damaged by the earthquake in 2009. The following paper starts with an accurate analysis of the Basilica, whose historical, stylistical cultural characteristics make it an unicum in the whole urban environment. The authors tried to identify in which way these values have been compromised or altered after the earthquake through several analysis （surveys, historical researches etc.） aiming at the recognition of collapses, the cracks profile, the structural transformations caused by the provisional measures： the goal is to provide a kind of Basilica ＂cognitive manual＂ that will be useful for the future interventions. This first analysis allowed to understand many aspects： on the one hand, the constructive phases and which damages were caused by past careless interventions of restoration, drawing attention to the vulnerability elements of the Basilica; on the other hand, the innovative technologies and materials of the post-seismic provisional measures and their exact location.

Provisional Regulations for Foreign Businessmen to Run Investment Companies in China

With a view to encouraging foreigninvestors to in vest in China, andimporting overseas advanced technologyand management, expertise, foreigninvestors are permitted to run in vestment-nature companies (hereinafter referred toas investment co.)in China in accordancewith the Chinese related foreigninvestment laws, decrees rules and theRegulations.Article 1 In the Regulations, the investmentco. is that the foreign investors useexclusive capital or joint capital with theChinese investors to run a company inChina engaged in direct in vestment.

Provisional Regulations on Directing Foreign Investment

Article 1 These regulations are formulated according to the rules of the State Law on foreign investment and the requirements of industrial policies to direct foreign investment, ensuring that it adapts to the programmes of China’s national economy and social development and protecting the legal rights and interests of investors.

Hemodynamic changes of fractional flow reserve after double kissing crush and provisional stenting technique for true bifurcation lesions

Background Fractional flow reserve （FFR）-guided percutaneous coronary intervention （PCI） is associated with fewer unfavorable events. However, the hemodynamic change in FFR after different stenting approaches for bifurcation lesions is still not fully studied. The aim of this study was to analyze the hemodynamic changes in FFR after double kissing （DK） crush and provisional side branch （SB） stenting （PS） for true coronary bifurcation lesions. Methods Seventy-five patients with true bifurcated lesions were randomly divided into DK （n=38） and PS （n=37） groups. Additional SB stenting in the PS group was required if there was any pinched SB ostium 〉70% stenosis, or ≥ type B dissection, or TIMI flow 〈grade 3. FFR at hyperemia in the main vessel （MV） and SB was measured prior- and post-stenting, and at 8 months follow-up. Results Baseline clinical, angiographic and lesion characteristics were matched well between the two groups, with the exception of the final kissing balloon inflation （FKBI, 100.0% in the DK vs. 83.8% in the PS group, P 〈0.001）. Baseline FFR was comparable between the DK and the PS groups, however, the acute gain and late loss of SB FFR at 8-month follow-up in the DK group were 0.18±0.15 and -0.06±0.11, compared to 0.12±0.18 （P=0.044） and -0.002±0.07 （P=-0.037） in the PS group, respectively. MV FFR post-stenting 〉0.94 was seen in about 40% of patients. There was no significant difference in the clinical events at 1-year follow-up between the two groups. Conclusions DK crush was associated with improved acute gain and late loss of SB FFR. The lower rate of FFR 〉0.94 after stenting underscored the further improvement of stentinq quality.

Instructions for Authors

1.Aims The provision of low carbon energy to our society is a key issue at the heart of sustainable development of global energy supply.The Global Energy Interconnection(GEI)publishes original research on theories and developments as well practical applications on principles of large scale low carbon energy generation,transmission,distribution&storage technologies,global energy interconnection&system developments,global energy policy and energy market operations,global climate changes&environmental impacts,global energy transition strategies and global energy governance.

Instructions for Authors

1.Aims,The provision of low carbon energy to our society is a key issue at the heart of sustainable development of global energy supply.The Global Energy Interconnection(GEI)publishes original research on theories and developments as well practical applications on principles of large scale low carbon energy generation,transmission,distribution&storage technologies,global energy interconnection&system developments,global energy policy and energy market operations,global climate changes&environmental impacts,global energy transition strategies and global energy governance.

Instructions for Authors

1.Aims The provision of low carbon energy to our society is a key issue at the heart of sustainable development of global energy supply.The Global Energy Interconnection(GEI)publishes original research on theories and developments as well practical applications on principles of large scale low carbon energy generation,transmission,distribution&storage technologies,global energy interconnection&system developments,global energy policy and energy market operations,global climate changes&environmental impacts,global energy transition strategies and global energy governance.

Provisional Stenting:A Contemporary Relook at the Strategy and Lingering Issues

Bifurcation lesions are encountered and treated in up to 1 in 5 cases of percutaneous coronary intervention(PCI).Such lesions pose a technical challenge to PCI,leading to lower procedural success and a higher rate of long-term adverse events.However,each bifurcation is unique in terms of anatomy and pathological presentation.There is no“one size fits all”strategy for coronary bifurcation PCI.Nevertheless,in most scenarios,provisional stenting is the preferred technique.This method is easy to apply and involves a logical stepwise escalation approach that is highly successful and safe.

Provision of Preconception Care by Midwives, Nurses and Doctors at Ndola Teaching Hospital in Ndola District, Zambia

Background: The goal of preconception care is to improve the outcome of a mother’s pregnancy and childbirth. Nevertheless, in most developing nations;Zambia included, there are still issues with implementation of preconception care. Therefore, the aim of this study was to establish the provision of preconception care by midwives, nurses and doctors at Ndola Teaching Hospital in Zambia. Methods: A concurrent embedded mixed methodology utilising a descriptive explorative study design, where 107 respondents were randomly selected using the lottery technique for quantitative part and two focused group discussions for qualitative part of the study was used. A self-administered questionnaire was used to collect quantitative data and a focus group discussion guide was used for the focus group discussions. Statistical Package of Social Sciences version 26 with significance set at 0.05 and at 95% confidence level and thematic analysis were used for data analysis. Results: 75% of the respondents in this study were not providing preconception care and only 25% of respondents were providing preconception care;however, this was provided randomly because there were no guidelines to follow. Among the respondents, 81.3% had medium knowledge, 70.1% had good practices and 92.5% had positive attitudes towards preconception care. Further analysis showed that the association between preconception care and knowledge, practices and attitudes was not statistically significant (p = values 0.336;0.344;1.000 respectively). Multivariate logistic regression revealed that participants with high knowledge were five times more likely to provide preconception care (OR = 5.00, CI = 0.42 - 59.7, P = 0.203). Generally, all the participants acknowledged that preconception care was an important package that could prevent maternal and child morbidities and mortalities. Conclusions: The study revealed that most of the respondents were not providing preconception care. Provision of preconception was done by a small fraction of the respondents and it was done in an unorderly manner due to lack of set standards and guidelines. Despite medium levels of knowledge and generally good practices and positive attitudes towards preconception care, its random provision indicates a need for established standards to enhance maternal and child health outcomes.

From EBIT to SEBIT(Sustainable EBIT):Sustainable Performance Accounting(SPA)Using the Example of CO_(2) Accounting

Corporate sustainability reporting has become increasingly important in recent years.However,conventional approaches reach their limits when it comes to quantifying and measuring the actual sustainability performance of a company.This article presents a new approach:Sustainable Performance Accounting(SPA),which is based on an extension of bookkeeping by including ESG bookkeeping.SPA enables companies to systematically measure and manage their sustainability performance.The article provides an overview of the basics of SPA methodology and uses a comprehensive example showing how SPA can be implemented in practice.The article is aimed at interested readers from science and practice as well as decision-makers who are interested in future-oriented sustainability reporting.

Comparative Performance Measurement of the Pareto Optimal Combination and Multi-Objective Combination Models for Controller Placement in Software-Defined Networks

The evolution of the current network has challenges of programmability, maintainability and manageability, due to network ossification. This challenge led to the concept of software-defined networking (SDN), to decouple the control system from the infrastructure plane caused by ossification. The innovation created a problem with controller placement. That is how to effectively place controllers within a network topology to manage the network of data plane devices from the control plane. The study was designed to empirically evaluate and compare the functionalities of two controller placement algorithms: the POCO and MOCO. The methodology adopted in the study is the explorative and comparative investigation techniques. The study evaluated the performances of the Pareto optimal combination (POCO) and multi-objective combination (MOCO) algorithms in relation to calibrated positions of the controller within a software-defined network. The network environment and measurement metrics were held constant for both the POCO and MOCO models during the evaluation. The strengths and weaknesses of the POCO and MOCO models were justified. The results showed that the latencies of the two algorithms in relation to the GoodNet network are 3100 ms and 2500 ms for POCO and MOCO respectively. In Switch to Controller Average Case latency, the performance gives 2598 ms and 2769 ms for POCO and MOCO respectively. In Worst Case Switch to Controller latency, the performance shows 2776 ms and 2987 ms for POCO and MOCO respectively. The latencies of the two algorithms evaluated in relation to the Savvis network, compared as follows: 2912 ms and 2784 ms for POCO and MOCO respectively in Switch to Controller Average Case latency, 3129 ms and 3017 ms for POCO and MOCO respectively in Worst Case Switch to Controller latency, 2789 ms and 2693 ms for POCO and MOCO respectively in Average Case Controller to Controller latency, and 2873 ms and 2756 ms for POCO and MOCO in Worst Case Switch to Controller latency respectively. The latencies of the two algorithms evaluated in relation to the AARNet, network compared as follows: 2473 ms and 2129 ms for POCO and MOCO respectively, in Switch to Controller Average Case latency, 2198 ms and 2268 ms for POCO and MOCO respectively, in Worst Case Switch to Controller latency, 2598 ms and 2471 ms for POCO and MOCO respectively, in Average Case Controller to Controller latency, 2689 ms and 2814 ms for POCO and MOCO respectively Worst Case Controller to Controller latency. The Average Case and Worst-Case latencies for Switch to Controller and Controller to Controller are minimal, and favourable to the POCO model as against the MOCO model when evaluated in the Goodnet, Savvis, and the Aanet networks. This simply indicates that the POCO model has a speed advantage as against the MOCO model, which appears to be more resilient than the POCO model.

Instructions for Authors

1.Aims The provision of low carbon energy to our society is a key issue at the heart of sustainable development of global energy supply.The Global Energy Interconnection(GEI)publishes original research on theories and developments as well practical applications on principles of large scale low carbon energy generation,transmission,distribution&storage technologies,global energy interconnection&system developments,global energy policy and energy market operations,global climate changes&environmental impacts,global energy transition strategies and global energy governance.

Instructions for Authors

1.Aims The provision of low carbon energy to our society is a key issue at the heart of sustainable development of global energy supply.The Global Energy Interconnection(GEI)publishes original research on theories and developments as well practical applications on principles of large scale low carbon energy generation,transmission,distribution&storage technologies,global energy interconnection&system developments,global energy policy and energy market operations,global climate changes&environmental impacts,global energy transition strategies and global energy governance.

Instructions for Authors

1.Aims,The provision of low carbon energy to our society is a key issue at the heart of sustainable development of global energy supply.The Global Energy Interconnection(GEI)publishes original research on theories and developments as well practical applications on principles of large scale low carbon energy generation,transmission,distribution&storage technologies.

Instructions for Authors

1.Aims The provision of low carbon energy to our society is a key issue at the heart of sustainable development of global energy supply.The Global Energy Interconnection(GEI)publishes original research on theories and developments as well practical applications on principles of large scale low carbon energy generation,transmission,distribution&storage technologies,global energy interconnection&system developments,global energy policy and energy market operations,global climate changes&environmental impacts,global energy transition strategies and global energy governance.

Estimating Aluminum Leaching into Meat Baked with Aluminum Foil Using Gravimetric and UV-Vis Spectrophotometric Method

Baking meat by wrapping them in Aluminum (Al) foil is common in many countries. The excessive use of Al foil in baking and the disagreement about using Al foils were the motivation to do this study especially after the 2007 WHO/FDA Report. In this investigation, a gravimetric and a UV-Vis spectrophotometric method are used to estimate Aluminum (Al) leaching into meat baked by wrapping in Al foil. Three kinds of meat were used fish, cow stakes and chicken. The importance of Al exposure area was neglected by many studies. Five factors affecting Al leaching into meat are studied (baking temperature, baking time, additives, Al exposure area and weight of meat). The effect of cooking times (20, 40, 60 minutes) at 180℃ and cooking temperatures (160℃, 180℃, 200℃) at 60 minutes on the amount of Al leaching were evaluated. It was found that Al leaching into meat increased with increasing temperature, baking time, additives and Al exposure area. Moreover, Al exposure area was more effective than the weight of the meat. The Al leaching was highest in fish and lowest in chicken. Comparing the present results with the Provisional Tolerance Weekly Intake of Al approved by WHO/FDA, it shows that Al leaching into meat baked by wrapping in Al foil may add considerable doses into the diet. Continuous monitoring of Al foil used for baking meat is recommended.

Effect of immediate implant placement and loading on soft tissue management

The recent article describes immediate implant placement and loading in the anterior segment. The main aim of this treatment option was to deliver provisional prosthesis to the patient in the same day of surgery, form papilla contours, and eliminate waiting of osseointegration time and the second surgery.

Joint optimization of maintenance inspection and spare provisioning for aircraft deteriorating parts

With the wide application of condition based maintenance(CBM) in aircraft maintenance practice, the joint optimization of maintenance and inventory management, which can take full advantage of CBM and reduce the aircraft operational cost, is receiving increasing attention. In order to optimize the inspection interval, maintenance decision and spare provisioning together for aircraft deteriorating parts, firstly, a joint inventory management strategy is presented, then, a joint optimization of maintenance inspection and spare provisioning for aircraft parts subject to the Wiener degradation process is proposed based on the strategy.Secondly, a combination of the genetic algorithm(GA) and the Monte Carol method is developed to minimize the total cost rate.Finally, a case study is conducted and the proposed joint optimization model is compared with the existing optimization model and the airline real case. The results demonstrate that the proposed model is more beneficial and effective. In addition, the sensitivity analysis of the proposed model shows that the lead time has higher influence on the optimal results than the urgent order cost and the corrective maintenance cost, which is consistent with the actual situation of aircraft maintenance practices and inventory management.

Spatial matching and flow in supply and demand of water provision services: A case study in Xiangjiang River Basin

Global climate change and increased human consumption have aggravated the uneven spatiotemporal distribution of watershed water resources, affecting the water provision supply and demand state. However, this problem has often been ignored. The present study used the Xiangjiang River basin(XRB) as the study area, and the Integrated Valuation of Ecosystem Services and Trade-offs(InVEST) model, demand quantification model,supply–demand ratio, and water flow formula were applied to explore the spatial heterogeneity, flow, and equilibrium between water supply and demand. The results demonstrated significant spatial heterogeneity in the upstream, midstream, and downstream regions.The areas of water shortage were mainly located the downstream of the Changsha–Zhuzhou–Xiangtan urban agglomeration, and the Hengyang basin was the most scarcity area. Affected by terrain gradients and human needs, water flow varied from-16.33 × 10^(8) m^(3) to 13.69 × 10^(8) m^(3)from the upstream to the downstream area, which provided a possibility to reduce spatial heterogeneity. In the future, measures such as strengthening water resource system control,sponge city construction, and dynamic monitoring technology should be taken to balance the supply and demand of water in different river sections of the basin. This study can provide references for regulating water resources allocation in different reaches of the basin.