LaNiO3 (LNO) thin films were prepared on Pt(111) / Ti / SiO2 / Si substrate by metal-organic decomposition (MOD) method. Pb(Zr,Ti)O3 ferroelectric thin films and their compositionally graded thin films were prepared o...LaNiO3 (LNO) thin films were prepared on Pt(111) / Ti / SiO2 / Si substrate by metal-organic decomposition (MOD) method. Pb(Zr,Ti)O3 ferroelectric thin films and their compositionally graded thin films were prepared on LNO / Pt / Ti / SiO2 /Si substrates by Sol-gel method. The composition depth profile of a typical up-graded film was determined by using a combination of Auger Electron Spectroscopy (ASE) and Ar Ion Etching. The results confirm that the processing method produces graded composition changes. XRD analysis showed that the graded thin films possessed composite structure of tetragonal and rhombohedral. The dielectric constants of Up-graded and Down-graded thin films were higher than that of each thin film unit. The dielectric constants were 277 and 269 at 10 kHz, respectively. The loss tangents were 0.019 and 0.018 at 10 kHz, respectively. The Hysteresis loops showed that the remanent polarizations of graded thin films were higher than that of each thin film unit, but the coercive fields were smaller. The remanent polarizations of Up-graded and Down-graded thin films were 30.06 and 26.96 μC·cm-2, respectively. The coercive fields were 54.14, 54.23 kV·cm-1, respectively. The pyroelectric coefficients of Up-graded and Down-graded thin films were 4.62, 2.51×10-8 C·cm-2·K-1 at room temperature, respectively. They were higher than that of each thin film unit.展开更多
Localized surface plasmon resonance(LSPR)effects of nanoscale plasmonic metals/semiconductor composites have been extensively applied into visible light photocatalysis.However,Pt nanoparticles(NPs)with the visible LSP...Localized surface plasmon resonance(LSPR)effects of nanoscale plasmonic metals/semiconductor composites have been extensively applied into visible light photocatalysis.However,Pt nanoparticles(NPs)with the visible LSPR absorption maxima have rarely been used as a photosensitizer to facilitate photocatalytic reactions,especially the photocatalytic overall water splitting(POWS)reaction,presumably because they feature weak light absorption.Herein,we present that the increased plasmonic absorption and local field enhancement can be achieved in the wide visible range by exploiting the simulated and experimental expressions of Pt nanocuboctahedra and Pt cuboctahedra-WO_(3)nanohybrids(Pt-WO3).First,monodisperse Pt cuboctahedra with different sizes,a hierarchical WO_(3)nanoarchitecture composed of radially patterned WO_(3)nanopillars,and Pt-WO_(3)were systematically synthesized.Subsequently,visible plasmonic Pt-WO_(3)photocatalysts were employed in the POWS tests and exhibited the significant activity enhancement in the visible light region.The apparent quantum efficiency(AQE)of greater than 7%within the range of visible light has been achieved for the optimal Pt-WO3.展开更多
Tungsten carbide(WC)-based materials are widely considered as the hydrogen evolution reaction(HER)process catalysts due to their“Pt-like”electronic structure.Nonetheless,traditional powder electrodes have a high cos...Tungsten carbide(WC)-based materials are widely considered as the hydrogen evolution reaction(HER)process catalysts due to their“Pt-like”electronic structure.Nonetheless,traditional powder electrodes have a high cost,and display problems related to the process itself and the poor stability over operation time.This paper presented a self-supported asymmetric porous ceramic electrode with WO_(3-x)whiskers formed in situ on the walls of the finger-like holes and membrane surface,which was prepared by combining phase inversion tape-casting,pressureless sintering,and thermal treatment in a CO_(2) atmosphere.The optimized ceramic electrode displayed good catalytic HER activity and outstanding stability at high current densities.More specifically,it demonstrated the lowest overpotentials of 107 and 123 mV and the lowest Tafel slopes of 59.3 and 72.4 mV·dec^(-1)at 10 mA·cm^(-2)in acidic and alkaline media,respectively.This superior performance was ascribed to the structure of the ceramic membrane and the charge transfer efficiency,which was favored by the in situ developed WC/WO_(3-x)heterostructure and the oxygen vacancies.展开更多
Gas sensors built with metal oxide semiconductors have attracted tremendous attention due to the growing demand for the detection of inflammable,explosive and toxic gases.Herein,to improve the sensing response,WO_(3) ...Gas sensors built with metal oxide semiconductors have attracted tremendous attention due to the growing demand for the detection of inflammable,explosive and toxic gases.Herein,to improve the sensing response,WO_(3) nanoparticles decorated with Ag and Pt bimetals(Ag and Pt/WO_(3) NPs)have been developed via combined hydrolysis and hydrothermal strategies.Such sensors prototypes show high response to acetone(Ra/Rg=250@100×10^(-6),140℃),which is 6.1 fold as high as that of the pristine WO_(3) NPs(Ra/Rg=41@100×10^(-6),140℃).Moreover,the recovery time of Ag and Pt/WO_(3) NPs was reduced from 138 to 13 s compared with that of the pristine WO_(3) NPs.The improved acetone sensing performance may be attributed to that the chemical and electronic sensitization of Ag and Pt to WO_(3) NPs increases adsorbed oxygen species,speeds up the reaction and thus boosts the sensing response.Our strategy that decoration of dual precious metals onto WO_(3) NPs improves the acetone sensing performance may be applied to the gas sensors of other sensing materials.展开更多
文摘LaNiO3 (LNO) thin films were prepared on Pt(111) / Ti / SiO2 / Si substrate by metal-organic decomposition (MOD) method. Pb(Zr,Ti)O3 ferroelectric thin films and their compositionally graded thin films were prepared on LNO / Pt / Ti / SiO2 /Si substrates by Sol-gel method. The composition depth profile of a typical up-graded film was determined by using a combination of Auger Electron Spectroscopy (ASE) and Ar Ion Etching. The results confirm that the processing method produces graded composition changes. XRD analysis showed that the graded thin films possessed composite structure of tetragonal and rhombohedral. The dielectric constants of Up-graded and Down-graded thin films were higher than that of each thin film unit. The dielectric constants were 277 and 269 at 10 kHz, respectively. The loss tangents were 0.019 and 0.018 at 10 kHz, respectively. The Hysteresis loops showed that the remanent polarizations of graded thin films were higher than that of each thin film unit, but the coercive fields were smaller. The remanent polarizations of Up-graded and Down-graded thin films were 30.06 and 26.96 μC·cm-2, respectively. The coercive fields were 54.14, 54.23 kV·cm-1, respectively. The pyroelectric coefficients of Up-graded and Down-graded thin films were 4.62, 2.51×10-8 C·cm-2·K-1 at room temperature, respectively. They were higher than that of each thin film unit.
基金supported by the Six Talent Peaks Project in Jiangsu Province(No.JNHB-043)the Research Fund of State Key Laboratory of Materials-Oriented Chemical Engineering(No.ZK201713).
文摘Localized surface plasmon resonance(LSPR)effects of nanoscale plasmonic metals/semiconductor composites have been extensively applied into visible light photocatalysis.However,Pt nanoparticles(NPs)with the visible LSPR absorption maxima have rarely been used as a photosensitizer to facilitate photocatalytic reactions,especially the photocatalytic overall water splitting(POWS)reaction,presumably because they feature weak light absorption.Herein,we present that the increased plasmonic absorption and local field enhancement can be achieved in the wide visible range by exploiting the simulated and experimental expressions of Pt nanocuboctahedra and Pt cuboctahedra-WO_(3)nanohybrids(Pt-WO3).First,monodisperse Pt cuboctahedra with different sizes,a hierarchical WO_(3)nanoarchitecture composed of radially patterned WO_(3)nanopillars,and Pt-WO_(3)were systematically synthesized.Subsequently,visible plasmonic Pt-WO_(3)photocatalysts were employed in the POWS tests and exhibited the significant activity enhancement in the visible light region.The apparent quantum efficiency(AQE)of greater than 7%within the range of visible light has been achieved for the optimal Pt-WO3.
基金This research was supported by the National Natural Science Foundation of China(U1732115)the China National Petroleum Corporation(KD200121)+1 种基金the Science and Technology Department of Henan Province(222102230054)the Henan Province Education Department of Key Scientific Research Project in Colleges and Universities(21B430012).
文摘Tungsten carbide(WC)-based materials are widely considered as the hydrogen evolution reaction(HER)process catalysts due to their“Pt-like”electronic structure.Nonetheless,traditional powder electrodes have a high cost,and display problems related to the process itself and the poor stability over operation time.This paper presented a self-supported asymmetric porous ceramic electrode with WO_(3-x)whiskers formed in situ on the walls of the finger-like holes and membrane surface,which was prepared by combining phase inversion tape-casting,pressureless sintering,and thermal treatment in a CO_(2) atmosphere.The optimized ceramic electrode displayed good catalytic HER activity and outstanding stability at high current densities.More specifically,it demonstrated the lowest overpotentials of 107 and 123 mV and the lowest Tafel slopes of 59.3 and 72.4 mV·dec^(-1)at 10 mA·cm^(-2)in acidic and alkaline media,respectively.This superior performance was ascribed to the structure of the ceramic membrane and the charge transfer efficiency,which was favored by the in situ developed WC/WO_(3-x)heterostructure and the oxygen vacancies.
基金financially supported by the National Natural Science Foundation of China(No.52072184)the Fundamental Research Funds for the Central Universities,Nankai University(No.63201179)。
文摘Gas sensors built with metal oxide semiconductors have attracted tremendous attention due to the growing demand for the detection of inflammable,explosive and toxic gases.Herein,to improve the sensing response,WO_(3) nanoparticles decorated with Ag and Pt bimetals(Ag and Pt/WO_(3) NPs)have been developed via combined hydrolysis and hydrothermal strategies.Such sensors prototypes show high response to acetone(Ra/Rg=250@100×10^(-6),140℃),which is 6.1 fold as high as that of the pristine WO_(3) NPs(Ra/Rg=41@100×10^(-6),140℃).Moreover,the recovery time of Ag and Pt/WO_(3) NPs was reduced from 138 to 13 s compared with that of the pristine WO_(3) NPs.The improved acetone sensing performance may be attributed to that the chemical and electronic sensitization of Ag and Pt to WO_(3) NPs increases adsorbed oxygen species,speeds up the reaction and thus boosts the sensing response.Our strategy that decoration of dual precious metals onto WO_(3) NPs improves the acetone sensing performance may be applied to the gas sensors of other sensing materials.