To address the incompatibility between high environmental adaptability and deep subwavelength characteristics in conventional local resonance metamaterials,and overcome the deficiencies in the stability of existing ac...To address the incompatibility between high environmental adaptability and deep subwavelength characteristics in conventional local resonance metamaterials,and overcome the deficiencies in the stability of existing active control techniques for band gaps,this paper proposes a design method of pure metal vibration damping metamaterial with continuously tunable stiffness for wideband elastic wave absorption.We design a dual-helix narrow-slit pure metal metamaterial unit,which possesses the triple advantage of high spatial compactness,low stiffness characteristics,and high structural stability,enabling the opening of elastic flexural band gaps in the low-frequency range.Similar to the principle of a sliding rheostat,the introduction of continuously sliding plug-ins into the helical slits enables the continuous variation of the stiffness of the metamaterial unit,achieving a continuously tunable band gap effect.This successfully extends the effective band gap by more than ten times.The experimental results indicate that this metamaterial unit can be used as an additional vibration absorber to absorb the low-frequency vibration energy effectively.Furthermore,it advances the metamaterial absorbers from a purely passive narrowband design to a wideband tunable one.The pure metal double-helix metamaterials retain the subwavelength properties of metamaterials and are suitable for deployment in harsh environments.Simultaneously,by adjusting its stiffness,it substantially broadens the effective band gap range,presenting promising potential applications in various mechanical equipment operating under adverse conditions.展开更多
In the present study, pure iron/copper composite metal cladding was deposited onto carbon steel by tungsten inert gas welding. The study focused on interfacial morphological, microstructural, and mechanical analyses o...In the present study, pure iron/copper composite metal cladding was deposited onto carbon steel by tungsten inert gas welding. The study focused on interfacial morphological, microstructural, and mechanical analyses of the composite cladding layers. Iron liquid–solid-phase zones were formed at copper/steel and iron interfaces because of the melting of the steel substrate and iron. Iron concentrated in the copper cladding layer was observed to exhibit belt, globule, and dendrite morphologies. The appearance of iron-rich globules indicated the occurrence of liquid phase separation(LPS) prior to solidification, and iron-rich dendrites crystallized without the occurrence of LPS. The maximum microhardness of the iron/steel interface was lower than that of the copper/steel interface because of the diffusion of elemental carbon. All samples fractured in the cladding layers. Because of a relatively lower strength of the copper layer, a short plateau region appeared when shear movement was from copper to iron.展开更多
The research activities of the calculation of the elastic constants of metal are mainly focused on the elastic constants of crystal at the micro level. To the calculation of the macroscopic elastic constants of metal,...The research activities of the calculation of the elastic constants of metal are mainly focused on the elastic constants of crystal at the micro level. To the calculation of the macroscopic elastic constants of metal, although molecular dynamics method and quasicontinuum method can be used, but there are shortcomings in them, such as a large amount of computation and that the spatial scale of the study model is limited. Therefore, with a pure metal thin plate composed of a single layer of microscopic particles as research object, a new mechanical model is established after the interactions between microscopic particles of the thin plate are applied on the continuum mechanics model of the thin plate. According to this model, the calculation formulas for the microscopic elastic constants, which are the elastic constants of any triangle region in the model, are obtained. After the concept of the ideal micro structure is presented, the calculation formulas for the macroscopic elastic constants, the elastic modulus and the Poisson’s ratio of pure metal are obtained, where the Poisson's ratio is the constant that is equal to 1?3. As an example, the elastic constants and the elastic modulus of pure copper are solved, where c11 is 175.811 GPa, c12 is 58.604 GPa, c33 is 58.604 GPa and E is 156.277 GPa, the rationality and the correctness of the model are verified. The model presented fully embodies the discreteness of the microstructure of solid, is a development to the continuum model, and is more suitable to reality, more simplified and more new to the study of the macroscopic elastic constants of pure metal.展开更多
On the basis of the experimental work of adhesion(W)data,the adhesion between transition metal car- bides and pure liquid metals which do not react with carbides is studied.In view of great scattering of the ex- perim...On the basis of the experimental work of adhesion(W)data,the adhesion between transition metal car- bides and pure liquid metals which do not react with carbides is studied.In view of great scattering of the ex- perimental values of W,a critical analysis of these results is performed.The selected W values for 9 copper/carbide systems and 6 metal/TiC systems are used to discuss the various suggestions concerning the mechanism of adhesion and to evidence the role of the valence electrons of the both carbide and metal on the interactions between metals and carbides.The interactions between a metal and a carbide are essentially metal- lic interactions,resulting from the overlapping of the valence electrons at the metal/carbide interface.展开更多
基金supported by the National Natural Science Foundation of China(No.52250287)the Outstanding Youth Science Fund Project of Shaanxi Province of China(No.2024JC-JCQN-49)。
文摘To address the incompatibility between high environmental adaptability and deep subwavelength characteristics in conventional local resonance metamaterials,and overcome the deficiencies in the stability of existing active control techniques for band gaps,this paper proposes a design method of pure metal vibration damping metamaterial with continuously tunable stiffness for wideband elastic wave absorption.We design a dual-helix narrow-slit pure metal metamaterial unit,which possesses the triple advantage of high spatial compactness,low stiffness characteristics,and high structural stability,enabling the opening of elastic flexural band gaps in the low-frequency range.Similar to the principle of a sliding rheostat,the introduction of continuously sliding plug-ins into the helical slits enables the continuous variation of the stiffness of the metamaterial unit,achieving a continuously tunable band gap effect.This successfully extends the effective band gap by more than ten times.The experimental results indicate that this metamaterial unit can be used as an additional vibration absorber to absorb the low-frequency vibration energy effectively.Furthermore,it advances the metamaterial absorbers from a purely passive narrowband design to a wideband tunable one.The pure metal double-helix metamaterials retain the subwavelength properties of metamaterials and are suitable for deployment in harsh environments.Simultaneously,by adjusting its stiffness,it substantially broadens the effective band gap range,presenting promising potential applications in various mechanical equipment operating under adverse conditions.
基金financially supported by the National Natural Science Foundation of China (No. 51575132)
文摘In the present study, pure iron/copper composite metal cladding was deposited onto carbon steel by tungsten inert gas welding. The study focused on interfacial morphological, microstructural, and mechanical analyses of the composite cladding layers. Iron liquid–solid-phase zones were formed at copper/steel and iron interfaces because of the melting of the steel substrate and iron. Iron concentrated in the copper cladding layer was observed to exhibit belt, globule, and dendrite morphologies. The appearance of iron-rich globules indicated the occurrence of liquid phase separation(LPS) prior to solidification, and iron-rich dendrites crystallized without the occurrence of LPS. The maximum microhardness of the iron/steel interface was lower than that of the copper/steel interface because of the diffusion of elemental carbon. All samples fractured in the cladding layers. Because of a relatively lower strength of the copper layer, a short plateau region appeared when shear movement was from copper to iron.
文摘The research activities of the calculation of the elastic constants of metal are mainly focused on the elastic constants of crystal at the micro level. To the calculation of the macroscopic elastic constants of metal, although molecular dynamics method and quasicontinuum method can be used, but there are shortcomings in them, such as a large amount of computation and that the spatial scale of the study model is limited. Therefore, with a pure metal thin plate composed of a single layer of microscopic particles as research object, a new mechanical model is established after the interactions between microscopic particles of the thin plate are applied on the continuum mechanics model of the thin plate. According to this model, the calculation formulas for the microscopic elastic constants, which are the elastic constants of any triangle region in the model, are obtained. After the concept of the ideal micro structure is presented, the calculation formulas for the macroscopic elastic constants, the elastic modulus and the Poisson’s ratio of pure metal are obtained, where the Poisson's ratio is the constant that is equal to 1?3. As an example, the elastic constants and the elastic modulus of pure copper are solved, where c11 is 175.811 GPa, c12 is 58.604 GPa, c33 is 58.604 GPa and E is 156.277 GPa, the rationality and the correctness of the model are verified. The model presented fully embodies the discreteness of the microstructure of solid, is a development to the continuum model, and is more suitable to reality, more simplified and more new to the study of the macroscopic elastic constants of pure metal.
文摘On the basis of the experimental work of adhesion(W)data,the adhesion between transition metal car- bides and pure liquid metals which do not react with carbides is studied.In view of great scattering of the ex- perimental values of W,a critical analysis of these results is performed.The selected W values for 9 copper/carbide systems and 6 metal/TiC systems are used to discuss the various suggestions concerning the mechanism of adhesion and to evidence the role of the valence electrons of the both carbide and metal on the interactions between metals and carbides.The interactions between a metal and a carbide are essentially metal- lic interactions,resulting from the overlapping of the valence electrons at the metal/carbide interface.