Laser ablation–inductively coupled plasma–mass spectrometry（LA–ICP–MS） was used to determine the trace element concentrations of magnetite from the Heifengshan, Shuangfengshan, and Shaquanzi Fe（–Cu） deposits ...Laser ablation–inductively coupled plasma–mass spectrometry（LA–ICP–MS） was used to determine the trace element concentrations of magnetite from the Heifengshan, Shuangfengshan, and Shaquanzi Fe（–Cu） deposits in the Eastern Tianshan Orogenic Belt. The magnetite from these deposits typically contains detectable Mg, Al, Ti, V, Cr, Mn, Co, Ni, Zn and Ga. The trace element contents in magnetite generally vary less than one order of magnitude. The subtle variations of trace element concentrations within a magnetite grain and between the magnetite grains in the same sample probably indicate local inhomogeneity of ore–forming fluids. The variations of Co in magnetite between samples are probably due to the mineral proportion of magnetite and pyrite. Factor analysis has discriminated three types of magnetite： Ni–Mn–V–Ti（Factor 1）, Mg–Al–Zn（Factor 2）, and Ga– Co（Factor 3） magnetite. Magnetite from the Heifengshan and Shuangfengshan Fe deposits has similar normalized trace element spider patterns and cannot be discriminated according to these factors. However, magnetite from the Shaquanzi Fe–Cu deposit has affinity to Factor 2 with lower Mg and Al but higher Zn concentrations, indicating that the ore–forming fluids responsible for the Fe–Cu deposit are different from those for Fe deposits. Chemical composition of magnetite indicates that magnetite from these Fe（–Cu） deposits was formed by hydrothermal processes rather than magmatic differentiation. The formation of these Fe（–Cu） deposits may be related to felsic magmatism.展开更多
Bayan Obo ore deposit is the largest rare-earth element（REE） resource,and the second largest niobium（Nb） resource in the world.Due to the complicated element/mineral compositions and involving several geological e...Bayan Obo ore deposit is the largest rare-earth element（REE） resource,and the second largest niobium（Nb） resource in the world.Due to the complicated element/mineral compositions and involving several geological events,the REE enrichment mechanism and genesis of this giant deposit still remains intense debated.The deposit is hosted in the massive dolomite,and nearly one hundred carbonatite dykes occur in the vicinity of the deposit.The carbonatite dykes can be divided into three types from early to late：dolomite,co-existing dolomite-calcite and calcite type,corresponding to different evolutionary stages of carbonatite magmatism based on the REE and trace element data.The latter always has higher REE content.The origin of the ore-hosting dolomite at Bayan Obo has been addressed in various models,ranging from a normal sedimentary carbonate rocks to volcano-sedimentary sequence,and a large carbonatitic intrusion.More geochemical evidences show that the coarse-grained dolomite represents a Mesoproterozoic carbonatite pluton and the fine-grained dolomite resulted from the extensive REE mineralization and modification of the coarse-grained variety.The ore bodies,distributed along an E-W striking belt,occur as large lenses and underwent more intense fluoritization and fenitization.The first episode mineralization is characterized by disseminated mineralization in the dolomite.The second or main-episode is banded and/or massive mineralization,cut by the third episode consisting of aegirinerich veins.Various dating methods gave different mineralization ages at Bayan Obo,resulting in long and hot debates.Compilation of available data suggests that the mineralization is rather variable with two peaks at～1400 and 440 Ma.The early mineralization peak closes in time to the intrusion of the carbonatite dykes.A significant thermal event at ca.440 Ma resulted in the formation of late-stage veins with coarse crystals of REE minerals.Fluids involving in the REE-Nb-Fe mineralization at Bayan Obo might be REE-F-C02-NaCI-H20 system.The presence of REE-carbonates as an abundant solid in the ores shows that the original ore-forming fluids are very rich in REE,and therefore,have the potential to produce economic REE ores at Bayan Obo.the Bayan Obo deposit is a product of mantle-derived carbonatitic magmatism at ca.1400 Ma,which was likely related to the breakup of Columbia.Some remobilization of REE occurred due to subduction of the Palaeo-Asian oceanic plate during the Silurian,forming weak vein-like mineralization.展开更多
The physical vapour deposition of Ni atoms on α-Fe（001） surface under different deposition temperatures were simulated by molecular dynamics to study the intermixing and microstructure of the interracial region. Th...The physical vapour deposition of Ni atoms on α-Fe（001） surface under different deposition temperatures were simulated by molecular dynamics to study the intermixing and microstructure of the interracial region. The results indicate that Ni atoms hardly penetrate into Fe substrate while Fe atoms easily diffuse into Ni deposition layers. The thickness of the intermixing region is temperature-dependent, with high temperatures yielding larger thicknesses. The deposited layers are mainly composed of amorphous phase due to the abnormal deposition behaviour of Ni and Fe. In the deposited Ni-rich phase, the relatively stable metallic compound B2 structured FeNi is found under high deposition temperature conditions.展开更多
This paper presents the results of a study concerned with the surface hardening of Fe-based alloys and WC-8Co cemented carbide by inte- grating laser cladding and the electrospark deposition processes. Specimens of lo...This paper presents the results of a study concerned with the surface hardening of Fe-based alloys and WC-8Co cemented carbide by inte- grating laser cladding and the electrospark deposition processes. Specimens of low carbon steel were processed firstly by laser cladding with Fe-based alloy powders and then by electrospark deposition with WC-SCo cemented carbide. It is shown that, for these two treatments, the electrospark coating possesses finer microstructure than the laser coating, and the thickness and surface hardness of the electrospark coating can be substantially increased.展开更多
A new technique of electroplating amorphous Fe-Ni-W alloy deposits was proposed.The structure and morphology o Fe-Ni-W alloy deposit were detected by XRD and SEM.The friction and wear behavior of Fe-Ni-W alloy deposit...A new technique of electroplating amorphous Fe-Ni-W alloy deposits was proposed.The structure and morphology o Fe-Ni-W alloy deposit were detected by XRD and SEM.The friction and wear behavior of Fe-Ni-W alloy deposit were studied and compared with that of chromium deposit.The corrosion properties against 5% sodium chloride,5% sulfuric acid and 5% sodium hydroxide were also discussed.The experimental results indicate that Fe-Ni-W alloy deposits have superior properties against wea than hard chromium deposits under dry sliding condition.Under oil sliding condition,except their better wear resistance,the deposits can protect their counterparts against wear.The deposits plated on brass and AISI 1045 steel show good behavior against corrosion o 5% sodium chloride,5% sulfuric acid and 5% sodium hydroxide.The bath of electroplating amorphous Fe-Ni-W alloy deposits is environmentally friendly and would find widely use in industry.展开更多
The Fe_3O_4/Fe/Fe_3O_4 (MIM) tri-layer films (200 nm/12-93 nm/200 um) were prepared on Si(100) by DC-magnetron reactive-sputtering followed by air- or vacuum-annealing at 280-400℃ for 1.5 h, respectively. Magnetic pr...The Fe_3O_4/Fe/Fe_3O_4 (MIM) tri-layer films (200 nm/12-93 nm/200 um) were prepared on Si(100) by DC-magnetron reactive-sputtering followed by air- or vacuum-annealing at 280-400℃ for 1.5 h, respectively. Magnetic properties and phases under different sandwich and annealing conditions were studied. In MIM structure, the incorporation of the interlayer iron does increase the magnetization measured under 8 kOe (M_8K), but reduce coercivity (H_c). The H_c of asdeposited films decreases from 354 Oe to 74 Oe; while M_8K increases from 254 to 392 emu/cc. By annealing in air, the whole MIM tri-layer film becomes γ-F_e2O_3, H_c is about 550 O_e and M_8K is around 250 emu/cc. The coercivity mechanism of as-deposited and annealed MIM trilayer films belongs to domain-wall pinning type. δM plots show that when the interlayer Fe thickness is 12 um, the Fe and Fe_3O_4 layers are decoupled in the as-deposited and annealed states; while it is coupled in the as deposited state when the Fe thickness increases to 23 um. Vacuum annealing of the MIM films leads to increase in both coercivity and magnetization, and to enhance the exchange coupling between layers.展开更多
The Damiao Fe-Ti-P ore deposit,hosted in the;.74 Ga Damiao anorthosite complex,is the only known anorthosite-hosted deposit in China.The deposit contains hundreds of ore bodies occurring as irregular lenses,veins
The Panzhihua intrusion in southwest China is part of the Emeishan large igneous province and host of a large Fe-Ti-V ore deposit.In previous interpretations it was considered to be a layered,differentiated sill with ...The Panzhihua intrusion in southwest China is part of the Emeishan large igneous province and host of a large Fe-Ti-V ore deposit.In previous interpretations it was considered to be a layered,differentiated sill with the ore deposits at its base.New structural and petrological data suggest instead that the intrusion has an open S-shape,with two near-concordant segments joined by a discordant dyke-like segment. During emplacement of the main intrusion,multiple generations of mafic dykes invaded carbonate wall rocks,producing a large contact aureole.In the central segment,magmatic layering is oriented oblique to the walls of the intrusion.This layering cannot have formed by crystal settling or in-situ growth on the floor of the intrusion;instead we propose that it resulted from inward solidification of multiple,individually operating,convection cells.Ore formation was triggered by interaction of magma with carbonate wall rocks.展开更多
Fe-Si ribbons and thin sheets with 6.5%Si content were prepared by means of the single roller rapid solidification and chemical vapor deposition (CVD), respectively. The initial textures of rapidly solidified Fe-6.5%S...Fe-Si ribbons and thin sheets with 6.5%Si content were prepared by means of the single roller rapid solidification and chemical vapor deposition (CVD), respectively. The initial textures of rapidly solidified Fe-6.5%Si ribbons were characteristic of the {100} fiber-type, which became weakened during primary recrystallization in various atmospheres. At the stage of secondary recrystallization, the {100} texture formed in Ar and the {110} texture in hydrogen, while there occurred a texture transformation from the {100} type to the {110} type in vacuum with the increase of annealing temperature. For Fe-6.5%Si sheets prepared by Si deposition in cold-rolled Fe-3%Si matrix sheets, their textures were dominated by the η-fiber (<001>//RD) with the maximum density at the {120}<001> orientations. After homogenization annealing, the η-fiber could evolve into the {130}<001> type or become more concentrated on the {120}<001> orientations, depending on the cold rolling modes of Fe-3%Si matrix sheets.展开更多
REE and other trace elements in ores, wall rocks, alkaline volcanic rocks and diabase dikes have been determined in the Yinachang Fe-Cu-REE deposit. Comparative studies of REE and trace element geochemical characteris...REE and other trace elements in ores, wall rocks, alkaline volcanic rocks and diabase dikes have been determined in the Yinachang Fe-Cu-REE deposit. Comparative studies of REE and trace element geochemical characteristics of these geological bodies indicate that the ores and alkaline volcanic rocks contain abundant REE and Y ({65.9}-{4633})×10+{-6}, with higher abundances of As, Mo, Nb, Co and U than those of the crust. Their chondrite-normalized patterns show a strong enrichment of LREE and a positive Eu anomaly, in contrast to those of the dolomites which are characterized by slight LREE enrichment and moderate negative Eu anomaly. The REE patterns of ores are similar to those of hydrothermal sediment cores in the East Pacific Rise, whereas the REE patterns of dolomites are similar to those of PAAS (Post-Archean Average Shale). In combination with the geological setting of the deposit, the primary ore-forming fluids might have higher REE and volatile elements, and might have been derived from mantle degassing, or the alkaline volcanic magmas. The Yinachang Fe-Cu-REE ore deposit is considered to be of volcanic exhalation-hydrothermal sedimentary origin.展开更多
Electroless Co-Fe-P alloys were deposited from an alkaline bath, containing boric acid as a buffer agent and sodium citrate as a complexing agent. As a result, with the increase of pH of the bath, the iron content of ...Electroless Co-Fe-P alloys were deposited from an alkaline bath, containing boric acid as a buffer agent and sodium citrate as a complexing agent. As a result, with the increase of pH of the bath, the iron content of the deposit increased, whereas the cobalt and phosphorus contents decreased. The structure of the deposit was investigated using X-ray diffraction （XRD） and transmission electron microscope （TEM）. The deposit consisted of hexahedron phase Co, cubic phase Fe-Co, and amorphous phase （crystalline）. The magnetic performances of the deposit were studied using vibrating sample magnetometer （VSM）. The more the content of Fe and the less the content of P （the content of Co being less）, the better the magnetic performances of the deposit. The Co-Fe-P deposit was suitable for use as soft magnetic material.展开更多
The stability of the electrodeposited amorphous Ni-Fe-P alloys was studied by DTA,DSC,XRD and improved four-ball wear tester in order to clear its applied scope.The results show that the element content has influence ...The stability of the electrodeposited amorphous Ni-Fe-P alloys was studied by DTA,DSC,XRD and improved four-ball wear tester in order to clear its applied scope.The results show that the element content has influence on the stability of amorphous Ni-Fe-P alloy,in which the crystallization temperature increases with Fe content,and the increase of P content delays the appearance of stable crystallization phases and recrystallization.There exist 6 exothermal reactions during heating the amorphous Ni69Fe8P23 alloy continuously.The activation energies of exothermal reactions at 248,303,322,350,376 and 442 ℃ are 131.5,111.6,237.8,253.6 and 238.5 kJ/mol,respectively.The amorphous Ni60Fe22P18 alloy crystallizes when the heating temperature is beyond 250 ℃.The stable crystallization phases consist of Ni(Fe)and Ni3P-type compounds Ni3P,Fe3P,(Fe,Ni)3P.The pressure and fraction have influence on the stability of amorphous alloy.Rubbing above the critical pressure crystallization will take place on the fractional surface.The crystallization phases due to pressure and fraction are different from those due to heating.It is the crystallization that increases the wear resistance of Ni-Fe-P coating under higher pressure.展开更多
The microstructures, friction and wear behavior under dry sliding condition of electrodeposited amorphous Fe-Co-W alloy deposits heat treated at different temperatures were studied. A comparative study of hard chrome ...The microstructures, friction and wear behavior under dry sliding condition of electrodeposited amorphous Fe-Co-W alloy deposits heat treated at different temperatures were studied. A comparative study of hard chrome deposit under the same testing condition was also made. The experimental results show that the hardness and wear resistance of amorphous Fe-Co-W alloy deposits are improved with the increasing of heat treatment temperature, and reach the maximum value at 800 ℃, then decrease above 800 ℃. Under 40 N load, the wear resistance properties of the alloy deposits heat treated at 800 ℃ are superior to those of hard chrome deposit. The main wear mechanisms of amorphous Fe-Co-W alloy deposits heat treated below 600 ℃ are peeling, plastic and flowing deformation; when the deposits are heat treated above 700 ℃, they are plastic and flowing deformation. While the main wear mechanisms of hard chrome are abrasive wear, fatigue and peeling.展开更多
The preparation, formation mechanism, surface appearance and structure of electroless plating Fe-Mo-W-B amorphous alloys were systematically studied. The deposition rates of the deposits in different bath composition ...The preparation, formation mechanism, surface appearance and structure of electroless plating Fe-Mo-W-B amorphous alloys were systematically studied. The deposition rates of the deposits in different bath composition as plated were measured. The formation mechanism of the deposits was discussed. The parameter for amorphous structures formation was suggested for the deposits.展开更多
Quartz porphyry in Yuejinshan Fe-polymetallic deposit is one of the rock masses, which formed the granite belt relating to the late Yanshanian skarn-type Fe-polymetallic deposits in the eastern Heilongjiang, and is al...Quartz porphyry in Yuejinshan Fe-polymetallic deposit is one of the rock masses, which formed the granite belt relating to the late Yanshanian skarn-type Fe-polymetallic deposits in the eastern Heilongjiang, and is also closely related to the metallogenic space of the Fe-polymetallic deposits. Quartz porphyry has the zircon U-Pb concordia age of 125.0±1.1 Ma, overall showing high Si(SiO_2=74.48%--75.00%), rich alkaline(Na_2O+K_2O=7.93%--8.17%, K_2O/Na_2O=1.39--1.46), and poor Mg(MgO=0.27%--0.31%), with the A/CNK value being 0.95--0.99, having the characteristics of obvious enrichment of LREE and medium Eu negative anomaly(0.69--0.74), indicating that the rock belongs to quasi-aluminous high potassium calc-alkaline series and has the same characteristics as those of the I-type granite. The rock is also characterized by the enrichment of LILE and active incompatible elements, and depletion of HFSE such as Nb, Ta, P and Ti, with the Mg~# value being 32--37, indicating that the rock originated from partial melting of crustal materials. It can be concluded from the above characteristics or data and from the distribution of contemporary magmatic rocks in the area, that quartz porphyry in Yuejinshan Fe-polymetallic deposit was formed in a tectonic background of the subduction of the paleo-Pacific plate in late Yanshanian.展开更多
Fused deposition modeling(FDM) is one of the latest rapid prototyping techniques in which parts can be manufactured at a fast pace and are manufactured with a high accuracy. This research work is carried out to study ...Fused deposition modeling(FDM) is one of the latest rapid prototyping techniques in which parts can be manufactured at a fast pace and are manufactured with a high accuracy. This research work is carried out to study the friction and wear behavior of parts made of newly developed Nylon6-Fe composite material by FDM. This work also involves the comparison of the friction and wear characteristics of the Nylon6-Fe composite with the existing acrylonitrile butadiene styrene(ABS) filament of the FDM machine. This Is carried out on the pin on disk setup by varying the load(5, 10, 15 and 20 N) and speed(200 and 300 r/min). It is concluded that the newly developed composite is highly wear resistant and can be used in industrial applications where wear resistance is of paramount importance. Morphology of the surface in contact with the Nylon6-Fe composite and ABS is also carried out.展开更多
基金financially supported by the Chinese 973 project(2012CB416804)the ‘‘CAS Hundred Talents’’ Project from the Chinese Academy of Sciences(KZCX2-YW-BR-09)to Qi Liang
文摘Laser ablation–inductively coupled plasma–mass spectrometry（LA–ICP–MS） was used to determine the trace element concentrations of magnetite from the Heifengshan, Shuangfengshan, and Shaquanzi Fe（–Cu） deposits in the Eastern Tianshan Orogenic Belt. The magnetite from these deposits typically contains detectable Mg, Al, Ti, V, Cr, Mn, Co, Ni, Zn and Ga. The trace element contents in magnetite generally vary less than one order of magnitude. The subtle variations of trace element concentrations within a magnetite grain and between the magnetite grains in the same sample probably indicate local inhomogeneity of ore–forming fluids. The variations of Co in magnetite between samples are probably due to the mineral proportion of magnetite and pyrite. Factor analysis has discriminated three types of magnetite： Ni–Mn–V–Ti（Factor 1）, Mg–Al–Zn（Factor 2）, and Ga– Co（Factor 3） magnetite. Magnetite from the Heifengshan and Shuangfengshan Fe deposits has similar normalized trace element spider patterns and cannot be discriminated according to these factors. However, magnetite from the Shaquanzi Fe–Cu deposit has affinity to Factor 2 with lower Mg and Al but higher Zn concentrations, indicating that the ore–forming fluids responsible for the Fe–Cu deposit are different from those for Fe deposits. Chemical composition of magnetite indicates that magnetite from these Fe（–Cu） deposits was formed by hydrothermal processes rather than magmatic differentiation. The formation of these Fe（–Cu） deposits may be related to felsic magmatism.
基金financed by Major State Basic Research Development Program(No.2012CB416605)Natural Science Foundation of China(No.41372099)
文摘Bayan Obo ore deposit is the largest rare-earth element（REE） resource,and the second largest niobium（Nb） resource in the world.Due to the complicated element/mineral compositions and involving several geological events,the REE enrichment mechanism and genesis of this giant deposit still remains intense debated.The deposit is hosted in the massive dolomite,and nearly one hundred carbonatite dykes occur in the vicinity of the deposit.The carbonatite dykes can be divided into three types from early to late：dolomite,co-existing dolomite-calcite and calcite type,corresponding to different evolutionary stages of carbonatite magmatism based on the REE and trace element data.The latter always has higher REE content.The origin of the ore-hosting dolomite at Bayan Obo has been addressed in various models,ranging from a normal sedimentary carbonate rocks to volcano-sedimentary sequence,and a large carbonatitic intrusion.More geochemical evidences show that the coarse-grained dolomite represents a Mesoproterozoic carbonatite pluton and the fine-grained dolomite resulted from the extensive REE mineralization and modification of the coarse-grained variety.The ore bodies,distributed along an E-W striking belt,occur as large lenses and underwent more intense fluoritization and fenitization.The first episode mineralization is characterized by disseminated mineralization in the dolomite.The second or main-episode is banded and/or massive mineralization,cut by the third episode consisting of aegirinerich veins.Various dating methods gave different mineralization ages at Bayan Obo,resulting in long and hot debates.Compilation of available data suggests that the mineralization is rather variable with two peaks at～1400 and 440 Ma.The early mineralization peak closes in time to the intrusion of the carbonatite dykes.A significant thermal event at ca.440 Ma resulted in the formation of late-stage veins with coarse crystals of REE minerals.Fluids involving in the REE-Nb-Fe mineralization at Bayan Obo might be REE-F-C02-NaCI-H20 system.The presence of REE-carbonates as an abundant solid in the ores shows that the original ore-forming fluids are very rich in REE,and therefore,have the potential to produce economic REE ores at Bayan Obo.the Bayan Obo deposit is a product of mantle-derived carbonatitic magmatism at ca.1400 Ma,which was likely related to the breakup of Columbia.Some remobilization of REE occurred due to subduction of the Palaeo-Asian oceanic plate during the Silurian,forming weak vein-like mineralization.
基金Project supported by the National Natural Science Foundation for Young Scientists of China (Grant No. 10702058)the China Postdoctoral Science Foundation (Grant No. 20090451100)
文摘The physical vapour deposition of Ni atoms on α-Fe（001） surface under different deposition temperatures were simulated by molecular dynamics to study the intermixing and microstructure of the interracial region. The results indicate that Ni atoms hardly penetrate into Fe substrate while Fe atoms easily diffuse into Ni deposition layers. The thickness of the intermixing region is temperature-dependent, with high temperatures yielding larger thicknesses. The deposited layers are mainly composed of amorphous phase due to the abnormal deposition behaviour of Ni and Fe. In the deposited Ni-rich phase, the relatively stable metallic compound B2 structured FeNi is found under high deposition temperature conditions.
文摘This paper presents the results of a study concerned with the surface hardening of Fe-based alloys and WC-8Co cemented carbide by inte- grating laser cladding and the electrospark deposition processes. Specimens of low carbon steel were processed firstly by laser cladding with Fe-based alloy powders and then by electrospark deposition with WC-SCo cemented carbide. It is shown that, for these two treatments, the electrospark coating possesses finer microstructure than the laser coating, and the thickness and surface hardness of the electrospark coating can be substantially increased.
基金Project(04GK1007) supported by the Science and Technology Office of Hunan Province,China
文摘A new technique of electroplating amorphous Fe-Ni-W alloy deposits was proposed.The structure and morphology o Fe-Ni-W alloy deposit were detected by XRD and SEM.The friction and wear behavior of Fe-Ni-W alloy deposit were studied and compared with that of chromium deposit.The corrosion properties against 5% sodium chloride,5% sulfuric acid and 5% sodium hydroxide were also discussed.The experimental results indicate that Fe-Ni-W alloy deposits have superior properties against wea than hard chromium deposits under dry sliding condition.Under oil sliding condition,except their better wear resistance,the deposits can protect their counterparts against wear.The deposits plated on brass and AISI 1045 steel show good behavior against corrosion o 5% sodium chloride,5% sulfuric acid and 5% sodium hydroxide.The bath of electroplating amorphous Fe-Ni-W alloy deposits is environmentally friendly and would find widely use in industry.
基金National Science Council of Taiwan-China! grant number NSC8&0208-M007-083PC.
文摘The Fe_3O_4/Fe/Fe_3O_4 (MIM) tri-layer films (200 nm/12-93 nm/200 um) were prepared on Si(100) by DC-magnetron reactive-sputtering followed by air- or vacuum-annealing at 280-400℃ for 1.5 h, respectively. Magnetic properties and phases under different sandwich and annealing conditions were studied. In MIM structure, the incorporation of the interlayer iron does increase the magnetization measured under 8 kOe (M_8K), but reduce coercivity (H_c). The H_c of asdeposited films decreases from 354 Oe to 74 Oe; while M_8K increases from 254 to 392 emu/cc. By annealing in air, the whole MIM tri-layer film becomes γ-F_e2O_3, H_c is about 550 O_e and M_8K is around 250 emu/cc. The coercivity mechanism of as-deposited and annealed MIM trilayer films belongs to domain-wall pinning type. δM plots show that when the interlayer Fe thickness is 12 um, the Fe and Fe_3O_4 layers are decoupled in the as-deposited and annealed states; while it is coupled in the as deposited state when the Fe thickness increases to 23 um. Vacuum annealing of the MIM films leads to increase in both coercivity and magnetization, and to enhance the exchange coupling between layers.
文摘The Damiao Fe-Ti-P ore deposit,hosted in the;.74 Ga Damiao anorthosite complex,is the only known anorthosite-hosted deposit in China.The deposit contains hundreds of ore bodies occurring as irregular lenses,veins
基金supported by a Famous overseas professor project MS2011ZGDZ[BJ]019 through China University of Geosciences (Beijing)and by the USA NSF "Continental Geodynamics" programGeologists from the Panzhihua mining company are thanked for their logistic support
文摘The Panzhihua intrusion in southwest China is part of the Emeishan large igneous province and host of a large Fe-Ti-V ore deposit.In previous interpretations it was considered to be a layered,differentiated sill with the ore deposits at its base.New structural and petrological data suggest instead that the intrusion has an open S-shape,with two near-concordant segments joined by a discordant dyke-like segment. During emplacement of the main intrusion,multiple generations of mafic dykes invaded carbonate wall rocks,producing a large contact aureole.In the central segment,magmatic layering is oriented oblique to the walls of the intrusion.This layering cannot have formed by crystal settling or in-situ growth on the floor of the intrusion;instead we propose that it resulted from inward solidification of multiple,individually operating,convection cells.Ore formation was triggered by interaction of magma with carbonate wall rocks.
基金This work was supported by the National Natural Science Foundation of China under Grant No.50130010, Pok Ying-Tung Education Foundation under Grant No. 71045 and the AFCRST under PRA MX 97-04.
文摘Fe-Si ribbons and thin sheets with 6.5%Si content were prepared by means of the single roller rapid solidification and chemical vapor deposition (CVD), respectively. The initial textures of rapidly solidified Fe-6.5%Si ribbons were characteristic of the {100} fiber-type, which became weakened during primary recrystallization in various atmospheres. At the stage of secondary recrystallization, the {100} texture formed in Ar and the {110} texture in hydrogen, while there occurred a texture transformation from the {100} type to the {110} type in vacuum with the increase of annealing temperature. For Fe-6.5%Si sheets prepared by Si deposition in cold-rolled Fe-3%Si matrix sheets, their textures were dominated by the η-fiber (<001>//RD) with the maximum density at the {120}<001> orientations. After homogenization annealing, the η-fiber could evolve into the {130}<001> type or become more concentrated on the {120}<001> orientations, depending on the cold rolling modes of Fe-3%Si matrix sheets.
文摘REE and other trace elements in ores, wall rocks, alkaline volcanic rocks and diabase dikes have been determined in the Yinachang Fe-Cu-REE deposit. Comparative studies of REE and trace element geochemical characteristics of these geological bodies indicate that the ores and alkaline volcanic rocks contain abundant REE and Y ({65.9}-{4633})×10+{-6}, with higher abundances of As, Mo, Nb, Co and U than those of the crust. Their chondrite-normalized patterns show a strong enrichment of LREE and a positive Eu anomaly, in contrast to those of the dolomites which are characterized by slight LREE enrichment and moderate negative Eu anomaly. The REE patterns of ores are similar to those of hydrothermal sediment cores in the East Pacific Rise, whereas the REE patterns of dolomites are similar to those of PAAS (Post-Archean Average Shale). In combination with the geological setting of the deposit, the primary ore-forming fluids might have higher REE and volatile elements, and might have been derived from mantle degassing, or the alkaline volcanic magmas. The Yinachang Fe-Cu-REE ore deposit is considered to be of volcanic exhalation-hydrothermal sedimentary origin.
基金Acknowledgements-This work was supported by the Fujian Provincial Natural Science Foundation of China （No. E0210020）.
文摘Electroless Co-Fe-P alloys were deposited from an alkaline bath, containing boric acid as a buffer agent and sodium citrate as a complexing agent. As a result, with the increase of pH of the bath, the iron content of the deposit increased, whereas the cobalt and phosphorus contents decreased. The structure of the deposit was investigated using X-ray diffraction （XRD） and transmission electron microscope （TEM）. The deposit consisted of hexahedron phase Co, cubic phase Fe-Co, and amorphous phase （crystalline）. The magnetic performances of the deposit were studied using vibrating sample magnetometer （VSM）. The more the content of Fe and the less the content of P （the content of Co being less）, the better the magnetic performances of the deposit. The Co-Fe-P deposit was suitable for use as soft magnetic material.
基金Project(E0410014) supported by the National Science Foundation of Fujian Province,China
文摘The stability of the electrodeposited amorphous Ni-Fe-P alloys was studied by DTA,DSC,XRD and improved four-ball wear tester in order to clear its applied scope.The results show that the element content has influence on the stability of amorphous Ni-Fe-P alloy,in which the crystallization temperature increases with Fe content,and the increase of P content delays the appearance of stable crystallization phases and recrystallization.There exist 6 exothermal reactions during heating the amorphous Ni69Fe8P23 alloy continuously.The activation energies of exothermal reactions at 248,303,322,350,376 and 442 ℃ are 131.5,111.6,237.8,253.6 and 238.5 kJ/mol,respectively.The amorphous Ni60Fe22P18 alloy crystallizes when the heating temperature is beyond 250 ℃.The stable crystallization phases consist of Ni(Fe)and Ni3P-type compounds Ni3P,Fe3P,(Fe,Ni)3P.The pressure and fraction have influence on the stability of amorphous alloy.Rubbing above the critical pressure crystallization will take place on the fractional surface.The crystallization phases due to pressure and fraction are different from those due to heating.It is the crystallization that increases the wear resistance of Ni-Fe-P coating under higher pressure.
文摘The microstructures, friction and wear behavior under dry sliding condition of electrodeposited amorphous Fe-Co-W alloy deposits heat treated at different temperatures were studied. A comparative study of hard chrome deposit under the same testing condition was also made. The experimental results show that the hardness and wear resistance of amorphous Fe-Co-W alloy deposits are improved with the increasing of heat treatment temperature, and reach the maximum value at 800 ℃, then decrease above 800 ℃. Under 40 N load, the wear resistance properties of the alloy deposits heat treated at 800 ℃ are superior to those of hard chrome deposit. The main wear mechanisms of amorphous Fe-Co-W alloy deposits heat treated below 600 ℃ are peeling, plastic and flowing deformation; when the deposits are heat treated above 700 ℃, they are plastic and flowing deformation. While the main wear mechanisms of hard chrome are abrasive wear, fatigue and peeling.
文摘The preparation, formation mechanism, surface appearance and structure of electroless plating Fe-Mo-W-B amorphous alloys were systematically studied. The deposition rates of the deposits in different bath composition as plated were measured. The formation mechanism of the deposits was discussed. The parameter for amorphous structures formation was suggested for the deposits.
基金Supported by Project of China Geological Survey(No.12120113098300)
文摘Quartz porphyry in Yuejinshan Fe-polymetallic deposit is one of the rock masses, which formed the granite belt relating to the late Yanshanian skarn-type Fe-polymetallic deposits in the eastern Heilongjiang, and is also closely related to the metallogenic space of the Fe-polymetallic deposits. Quartz porphyry has the zircon U-Pb concordia age of 125.0±1.1 Ma, overall showing high Si(SiO_2=74.48%--75.00%), rich alkaline(Na_2O+K_2O=7.93%--8.17%, K_2O/Na_2O=1.39--1.46), and poor Mg(MgO=0.27%--0.31%), with the A/CNK value being 0.95--0.99, having the characteristics of obvious enrichment of LREE and medium Eu negative anomaly(0.69--0.74), indicating that the rock belongs to quasi-aluminous high potassium calc-alkaline series and has the same characteristics as those of the I-type granite. The rock is also characterized by the enrichment of LILE and active incompatible elements, and depletion of HFSE such as Nb, Ta, P and Ti, with the Mg~# value being 32--37, indicating that the rock originated from partial melting of crustal materials. It can be concluded from the above characteristics or data and from the distribution of contemporary magmatic rocks in the area, that quartz porphyry in Yuejinshan Fe-polymetallic deposit was formed in a tectonic background of the subduction of the paleo-Pacific plate in late Yanshanian.
基金PTU Jalandhar,Manufacturing Research Lab GNDEC,Ludhiana and DST GOI for financial support
文摘Fused deposition modeling(FDM) is one of the latest rapid prototyping techniques in which parts can be manufactured at a fast pace and are manufactured with a high accuracy. This research work is carried out to study the friction and wear behavior of parts made of newly developed Nylon6-Fe composite material by FDM. This work also involves the comparison of the friction and wear characteristics of the Nylon6-Fe composite with the existing acrylonitrile butadiene styrene(ABS) filament of the FDM machine. This Is carried out on the pin on disk setup by varying the load(5, 10, 15 and 20 N) and speed(200 and 300 r/min). It is concluded that the newly developed composite is highly wear resistant and can be used in industrial applications where wear resistance is of paramount importance. Morphology of the surface in contact with the Nylon6-Fe composite and ABS is also carried out.
