Strategies on Sample Size Determination and Qualitative and Quantitative Traits Integration to Construct Core Collection of Rice (Oryza sativa)

The development of a core collection could enhance the utilization of germplasm collections in crop improvement programs and simplify their management. Selection of an appropriate sampling strategy is an important prerequisite to construct a core collection with appropriate size in order to adequately represent the genetic spectrum and maximally capture the genetic diversity in available crop collections. The present study was initiated to construct nested core collections to determine the appropriate sample size to represent the genetic diversity of rice landrace collection based on 15 quantitative traits and 34 qualitative traits of 2 262 rice accessions. The results showed that 50-225 nested core collections, whose sampling rate was 2.2%-9.9%, were sufficient to maintain the maximum genetic diversity of the initial collections. Of these, 150 accessions （6.6%） could capture the maximal genetic diversity of the initial collection. Three data types, i.e. qualitative traits （QT1）, quantitative traits （QT2） and integrated qualitative and quantitative traits （QTT）, were compared for their efficiency in constructing core collections based on the weighted pair-group average method combined with stepwise clustering and preferred sampling on adjusted Euclidean distances. Every combining scheme constructed eight rice core collections （225, 200, 175, 150, 125, 100, 75 and 50）. The results showed that the QTT data was the best in constructing a core collection as indicated by the genetic diversity of core collections. A core collection constructed only on the information of QT1 could not represent the initial collection effectively. QTT should be used together to construct a productive core collection.

Quantitative traits correlative analysis and growth comparison among different populations of bay scallop,Argopecten irradians

The shell traits and weight traits are measured in cultured populations of bay scallop, Argopecten irradians. The results of regression analysis show that the regression relationships for all the traits are significant (P<0.01). The correlative coefficients between body weight, as well as tissue weight with shell length, shell height and shell width are significant (P<0.05). But the correlative coefficients between the anterior and posterior auricle length with body weight as well as tissue weight are not significant (P>0.05). The multiple regression equation is obtained to estimate live body weight and tissue weight. The above traits except anterior and posterior auricle length are used for the growth and production comparison among three cultured populations, Duncan's new multiple range procedure analysis shows that all the traits in the Lingshuiqiao (LSQ) population are much more significant than those of the other two populations (P<0.01), and there is no significant difference between the Qipanmo (QPM) and Dalijia (DLJ) populations in all traits (P>0.05). The results indicate that the LSQ population has a higher growth rate and is expected to be more productive than the other two populations.

Joint Analysis Method for Major Genes Controlling Multiple Correlated Quantitative Traits

Based on the major gene and polygene mixed inheritance model for multiple correlated quantitative traits, the authors proposed a new joint segregation analysis method of major gene controlling multiple correlated quantitative traits, which include major gene detection and its effect and variation estimation. The effect and variation of major gene are estimated by the maximum likelihood method implemented via expectation-maximization （EM） algorithm. Major gene is tested with the likelihood ratio （LR） test statistic. Extensive simulation studies showed that joint analysis not only increases the statistical power of major gene detection but also improves the precision and accuracy of major gene effect estimates. An example of the plant height and the number of tiller of F2 population in rice cross Duonieai x Zhonghua 11 was used in the illustration. The results indicated that the genetic difference of these two traits in this cross refers to only one pleiotropic major gene. The additive effect and dominance effect of the major gene are estimated as -21.3 and 40.6 cm on plant height, and 22.7 and -25.3 on number of tiller, respectively. The major gene shows overdominance for plant height and close to complete dominance for number of tillers.

Association Analysis of Quantitative Traits in F_1 Families Derived from Two Maize Landraces

[ Objective] The objective of this study was to evaluate the genetic diversity and characterization of special maize population consisting of 135 Fl fami- lies. [ Method ] In this study, association analysis was conducted in 135 F1 families derived from two maize landraces, and the efficiency of this method was evalua- ted through simulation. [ Result] Association analysis with different kinds of families showed that large population size and robust phenotypic data were required for association mapping. For all the phenotypic traits, the model controlling beth population structure and relative kinship （ Q ＋ K） performed better than the model controlling relative kinship （K）, and similarly to the model controlling population structure （Q）. Across 100 simulation runs in QULINE, the average power of QTL detection for the two models were 88.64% and 83.64% respectively, and the number of false QTL was reduced from 399 with GLM model to 199 with K mod- el. Our simulation results suggested that these F1 families can be used for association analysis, and the power of the QTL detection was related to the maximum al- lele frequency （MAF）and the phenotypic variation （PVE） explained by QTL. [ Conclusion] The results from this study suggest that association analysis using the F1 families is an effective approach to study maize landraces for discovering elite genes which we are interested in from these special populations.

Targeted Genome Editing in Genes and cis- Regulatory Regions Improves Qualitative and Quantitative Traits in Crops

The Clustered Regularly Interspaced Short Palindromic Repeats （CRISPR）-associated protein 9 （CRISPR/Cas9）-based genomeediting system is a revolutionary technology for targeted muta- genesis in molecular biology research and genetic improvement of traits in crops （Cong et al., 2013; Ma et al., 2015, 2016）. Agronomic traits of crops are controlled by major genes and quantitative trait loci （QTL）. Therefore, the CRISPR/Cas9 system can be used to effectively and rapidly produce mutant traits by different strategies （Figure 1A-1C）. The most common application of the targeted editing system in genetic improvement is to knock out completely the functions of target genes, usually by editing site（s） in the coding sequences （CDS） to produce null-allele mutants （Figure 1A）.

Segregation Analysis on Genetic System of Quantitative Traits in Plants

Based on the traditional polygene inheritance model of quantitative traits,the author suggests the major gene and polygene mixed inheritance model.The model was considered as a general one,while the pure major gene and pure polygene inheritance model was a specific case of the general model.Based on the proposed theory,the author established the segregation analysis procedure to study the genetic system of quantitative traits of plants.At present,this procedure can be used to evaluate the genetic effect of individual major genes(up to two to three major genes),the collective genetic effect of polygene,and their heritability value.This paper introduces how to establish the procedure,its main achievements,and its applications.An example is given to illustrate the steps,methods,and effectiveness of the procedure.

Identification of Quantitative Trait Loci for Grain Traits in Japonica Rice

Quantitative trait loci（QTLs） of grain traits were detected to provide theoretical basis for fine mapping and molecular marker-assisted breeding of grain traits in japonica rice.Using an F2 population including 200 individuals derived from a cross combination between two japonica rice DL115 with large grain and XL005 with small grain,the grain length,grain width,grain thickness,ratio of grain length to width and 1 000-grain weight were evaluated in Beijing;and the quantitative trait loci for above five grain traits were identified by composite interval mapping using SSR markers.The results showed that the five grain traits exhibited a normal continuous distribution in F2 population,indicating they were quantitative traits controlled by multiple genes.A total of 16 QTLs conferring the five grain traits were detected on chromosomes 2,3,5 and 12,respectively.Eight QTLs,namely qGL3a,qGW2,qGW5,qGT2,qRLW2,qRLW3,qGWT2 and qGWT3,were major QTLs and explained 15.42,40.89,13.54,33.43,13.82,13.61,12.51 and 10.1% of the observed phenotypic variance,respectively.Among them,qGW2,qGT2,qRLW2 and qGWT2 were mapped in same interval RM12776-RM324 on chromosome 2.The marker interval RM12776-RM324 on chromosome 2 was common marker intervals of four major QTLs,and the two SSR markers RM12776 and RM324 would be used in molecular markerassisted breeding in japonica rice.The modes of gene action were mainly additive and partial dominance.Four QTLs＇ alleles were derived from small grain parent XL005,and other 12 QTLs＇ alleles were derived from large grain parent DL115.The alleles from larger parent were showed significant effects to grain length,grain width,grain thickness and 1 000-grain weight.

Quantitative Trait Loci for Heading Date and Their Relationship with Genetic Control of Yield Traits in Rice (Oryza sativa)

Grain yield and heading date are key factors determining the commercial potential of a rice variety. Mapping of quantitative trait loci （QTLs） in rice has been advanced from primary mapping to gene cloning, and heading date and yield traits have always attracted the greatest attention. In this review, genomic distribution of QTLs for heading date detected in populations derived from intra-specific crosses of Asian cultivated rice （Oryza sativa） was summarized, and their relationship with the genetic control of yield traits was analyzed. The information could be useful in the identification of QTLs for heading date and yield traits that are promising for the improvement of rice varieties.

Quantitative trait loci analysis for root traits in synthetic hexaploid wheat under drought stress conditions

Synthetic hexaploid wheat(SHW),possesses numerous genes for drought that can help breeding for drought-tolerant wheat varieties.We evaluated 10 root traits at seedling stage in 111 F9 recombinant inbred lines derived from a F2 population of a SHW line(SHW-L1)and a common wheat line,under normal(NC)and polyethylene glycol-simulated drought stress conditions(DC).We mapped quantitative trait loci(QTLs)for root traits using an enriched high-density genetic map containing 120370 single nucleotide polymorphisms(SNPs),733 diversity arrays technology markers(DArT)and 119 simple sequence repeats(SSRs).With four replicates per treatment,we identified 19 QTLs for root traits under NC and DC,and 12 of them could be consistently detected with three or four replicates.Two novel QTLs for root fresh weight and root diameter under NC explained 9 and 15.7%of the phenotypic variation respectively,and six novel QTLs for root fresh weight,the ratio of root water loss,total root surface area,number of root tips,and number of root forks under DC explained 8.5–14%of the phenotypic variation.Here seven of eight novel QTLs could be consistently detected with more than three replicates.Results provide essential information for fine-mapping QTLs related to drought tolerance that will facilitate breeding drought-tolerant wheat cultivars.

Mapping Quantitative Trait Loci Controlling Endosperm Traits with Molecular Marker

Based on the genetic models for triploid endosperm traits and on the methods for mapping diploid quantitative traits loci (QTLs), the genetic constitutions, components of means and genetic variances of QTL controlling endosperm traits under flanking marker genotypes of different generations were presented. From these results, a multiple linear regression method for mapping QTL underlying endosperm traits in cereals was proposed, which used the means of endosperm traits under flanking marker genotypes as a dependent variable, the coefficient of additive effect (d) and dominance effect (h1 and/or h2) of a putative QTL in a given interval as independent variables. This method can work at any position in a genome covered by markers and increase the estimation precision of QTL location and their effects by eliminating the interference of other relative QTLs. This method can also be easily used in other uneven data such as markers and quantitative traits detected or measured in plants and tissues different either in generations or at chromosomal ploidy levels, and in endosperm traits controlled by complicated genetic models considering the effects produced by genotypes of both maternal plants and seeds on them.

Quantitative Trait Locus Analysis for Rice Yield Traits under Two Nitrogen Levels

A recombinant inbred line population derived from a super hybrid rice Xieyou 9308（Xieqingzao B/Zhonghui 9308） and its genetic linkage map were used to detect quantitative trait loci（QTLs） for rice yield traits under the low and normal nitrogen（N） levels. A total of 52 QTLs for yield traits distributed in 27 regions on 9 chromosomes were detected, with each QTL explaining 4.93%–26.73% of the phenotypic variation. Eleven QTLs were simultaneously detected under the two levels, and 30 different QTLs were detected under the two N levels, thereby suggesting that the genetic bases controlling rice growth under the low and normal N levels were different. QTLs for number of panicles per plant, number of spikelets per panicle, number of filled grains per panicle, and grain density per panicle under the two N levels were detected in the RM135–RM168 interval on chromosome 3. QTLs for number of spikelets per panicle and number of filled grains per panicle under the two N levels, as well as number of panicles per plant and grain density per panicle, under the low N level, were detected in the RM5556–RM310 interval on chromosome 8. The above described QTLs shared similar regions with previously reported QTLs for rice N recycling.

Quantitative trait loci associated to agronomic traits and yield components in a Sorghum bicolor L.Moench RIL population cultivated under pre-flowering drought and well-watered conditions

The present study aims to identify QTL influencing agronomic traits and yield components under well-watered and pre-flowering drought stress conditions. One hundred F5 recombinant inbred lines (RIL) and the parental lines of a cross between a drought-tolerant and a susceptible line in a field experiment were carried out at Nong Lam University of Ho Chi Minh City, Vietnam. Drought stress was induced by withholding irrigation water from the plants at four weeks after sowing to flowering. Leaf area of the third leaf, stem diameter, plant height, days to heading, anthesis and maturity, panicle length, number of seeds per plant, hundred kernel weight and grain yield were measured. Plants were genotyped with 117 Diversity Arrays Technology (DArT) and eight expressed sequence tag (EST)-derived simple sequence repeat (SSR) markers. Composite interval mapping was carried out on the traits and significant QTL were claimed at a logarithm of the odds (LOD) score >2.5. A total of 50 QTL were detected on nine chromosomes or 13 linkage groups, respectively. Six promising QTL regions with seven QTL for yield and agronomic traits especially related to pre-flowering drought tolerance were identified on chromosomes SBI-01, SBI-03, SBI-04, SBI-05 and SBI-07.

Bivariate association analysis for quantitative traits using generalized estimation equation

Quantitative traits often underlie risk for complex diseases. Many studies collect multiple correlated quantitative phenotypes and perform univariate analyses on each of them respectively. However, this strategy may not be powerful and has limitations to detect plei- otropic genes that may underlie correlated quantitative traits. In addition, testing multiple traits individually will exacerbate perplexing problem of multiple testing. In this study, generalized estimating equation 2 （GEE2） is applied to association mapping of two correlated quantitative traits. We suppose that a quantitative trait locus is located in a chromosome region that exerts pleiotropic effects on multiple quantitative traits. In that region, multiple SNPs are genotyped. Genotypes of these SNPs and the two quantitative traits affected by a causal SNP were simulated under various parameter values： residual correlation coefficient between two traits, causal SNP heritability, minor allele frequency of the causal SNP, extent of linkage disequilibrium with the causal SNP, and the test sample size. By power ana- lytical analyses, it is showed that the bivariate method is generally more powerful than the univariate method. This method is robust and yields false-positive rates close to the pre-set nominal significance level. Our real data analyses attested to the usefulness of the method.

Detection of Quantitative Trait Loci Associated with Live Measurement Traits in Pigs

Live measurement growth traits are very important economic traits in pig production and breeding. In this research, quantitative trait loci （QTL） were detected for 11 live estimated growth and carcass traits, including birth weight （BWT）, average daily gain over testing periods （ADG3）, live backfat thickness at last 3-4th lumbar （LBFT3）, live loin eye area （LLEA）, and so on, in 214 pig resource family population, including 180 F2 individual, by 39 microsatellite marker loci on SSC4, SSC6, SSC7, SSC8, and SSC13. The results indicated that 4 chromosome significant level QTL and one suggestive QTL were detected for ADG3 （at position of 50 cM on SSC8）, LBFT3 （at position of 147 cM on SSC4）, LLEA （one highly significant at position of 48 cM on SSC7; another significant at position of 125 cM on SSC8） and BWT （suggestive significant at position of 0 cM, at marker sw489 on SSC4）. The phenotypic variance of these QTL accounted for 0.95% to 16.91%. Most of them were mentioned in previous reports; except the QTL of LLEA at position of sw1953 on SSC8 which maybe a new QTL.

Identification of Quantitative Trait Loci Controlling Seed Physical and Nutrient Traits in Cotton

Cotton(Gossypium spp.) is the leading fiber crop,and an important source of the important edible oil and protein meals in the world.Complex genetics and strong environmental effects hinder

Analyses and identifications of quantitative trait loci and candidate genes controlling mesocotyl elongation in rice

Rice direct seeding has the significant potential to save labor and water,conserve environmental resources,and reduce greenhouse gas emissions tremendously.Therefore,rice direct seeding is becoming the major cultivation technology applied to rice production in many countries.Identifying and utilizing genes controlling mesocotyl elongation is an effective approach to accelerate breeding procedures and meet the requirements for direct-seeded rice(DSR) production.This study used a permanent mapping population with 144 recombinant inbred lines(RILs) and 2 828 bin-markers to detect quantitative trait loci(QTLs) associated with mesocotyl length in 2019 and 2020.The mesocotyl lengths of the rice RILs and their parents,Lijiangxintuanheigu(LTH) and Shennong 265(SN265),were measured in a growth chamber at 30°C in a dark environment.A total of 16 QTLs for mesocotyl length were identified on chromosomes 1(2),2(4),3(2),4,5,6,7,9,11(2),and 12.Seven of these QTLs,including qML1a,qML1b,qML2d,qML3a,qML3b,qML5,and qML11b,were reproducibly detected in both years via the interval mapping method.The major QTL,qML3a,was reidentified in two years via the composite interval mapping method.A total of 10 to 413 annotated genes for each QTL were identified in their smallest genetic intervals of 37.69 kb to 2.78 Mb,respectively.Thirteen predicted genes within a relatively small genetic interval(88.18 kb) of the major mesocotyl elongation QTL,qML3a,were more thoroughly analyzed.Finally,the coding DNA sequence variations among SN265,LTH,and Nipponbare indicated that the LOC_Os03g50550 gene was the strongest candidate gene for the qML3a QTL controlling the mesocotyl elongation.This LOC_Os03g50550 gene encodes a mitogen-activated protein kinase.Relative gene expression analysis using qRT-RCR further revealed that the expression levels of the LOC_Os03g50550 gene in the mesocotyl of LTH were significantly lower than in the mesocotyl of SN265.In conclusion,these results further strengthen our knowledge about rice’s genetic mechanisms of mesocotyl elongation.This investigation’s discoveries will help to accelerate breeding programs for new DSR variety development.

Assessment of molecular markers and marker-assisted selection for drought tolerance in barley(Hordeum vulgare L.)

This review updates the present status of the field of molecular markers and marker-assisted selection(MAS),using the example of drought tolerance in barley.The accuracy of selected quantitative trait loci(QTLs),candidate genes and suggested markers was assessed in the barley genome cv.Morex.Six common strategies are described for molecular marker development,candidate gene identification and verification,and their possible applications in MAS to improve the grain yield and yield components in barley under drought stress.These strategies are based on the following five principles:(1)Molecular markers are designated as genomic‘tags’,and their‘prediction’is strongly dependent on their distance from a candidate gene on genetic or physical maps;(2)plants react differently under favourable and stressful conditions or depending on their stage of development;(3)each candidate gene must be verified by confirming its expression in the relevant conditions,e.g.,drought;(4)the molecular marker identified must be validated for MAS for tolerance to drought stress and improved grain yield;and(5)the small number of molecular markers realized for MAS in breeding,from among the many studies targeting candidate genes,can be explained by the complex nature of drought stress,and multiple stress-responsive genes in each barley genotype that are expressed differentially depending on many other factors.

Identifying genetic susceptibility to Aspergillus fumigatus infection using collaborative cross mice and RNA-Seq approach

Background:Aspergillus fumigatus(Af)is one of the most ubiquitous fungi and its infection potency is suggested to be strongly controlled by the host genetic back-ground.The aim of this study was to search for candidate genes associated with host susceptibility to Aspergillus fumigatus(Af)using an RNAseq approach in CC lines and hepatic gene expression.Methods:We studied 31 male mice from 25 CC lines at 8 weeks old;the mice were infected with Af.Liver tissues were extracted from these mice 5 days post-infection,and next-generation RNA-sequencing(RNAseq)was performed.The GENE-E analysis platform was used to generate a clustered heat map matrix.Results:Significant variation in body weight changes between CC lines was ob-served.Hepatic gene expression revealed 12 top prioritized candidate genes differ-entially expressed in resistant versus susceptible mice based on body weight changes.Interestingly,three candidate genes are located within genomic intervals of the previ-ously mapped quantitative trait loci(QTL),including Gm16270 and Stox1 on chromo-some 10 and Gm11033 on chromosome 8.Conclusions:Our findings emphasize the CC mouse model's power in fine mapping the genetic components underlying susceptibility towards Af.As a next step,eQTL analysis will be performed for our RNA-Seq data.Suggested candidate genes from our study will be further assessed with a human cohort with aspergillosis.

GSW3.1,a novel gene controlling grain size and weight in rice

Grain size and weight are closely related traits determining yield in rice(Oryza sativa L.).Since indica and japonica rice varieties differ significantly in multiple traits,a high-generation recombinant inbred line(RIL)population derived from the crossing LH9(indica)and RPY(japonica)was used to map grainrelated traits in six environments.Pyramiding of the quantitative trait loci(QTL)for thousand-grain weight showed that combinations of multiple QTL significantly increased the phenotypic effect.A novel gene named GSW3.1 controlling grain size and weight was discovered using the major QTL for the colocalization of grain width and thousand-grain weight on chromosome 3.Gene editing revealed that GSW3.1(LOC_Os03g16850)was pleiotropic,positively regulating grain size and weight while affecting several other agronomic traits.Haplotype analysis indicated that some traits,including grain width and weight,were highly correlated with indica-japonica differentiation.

Identification of quantitative trait loci for the dead leaf rate and the seedling dead rate under alkaline stress in rice

The quantitative trait loci （QTLs） for the dead leaf rate （DLR） and the dead seedling rate （DSR） at the different rice growing periods after transplanting under alkaline stress were identified using an F2：3 population, which included 200 individuals and lines derived from a cross between two japonica rice cultivars Gaochan 106 and Changbai 9 with microsatellite markers. The DLR detected at 20 days to 62 days after transplanting under alkaline stress showed continuous normal or near normal distributions in F3 lines, which was the quantitative trait controlled by multiple genes. The DSR showed a continuous distribution with 3 or 4 peaks and was the quantitative trait controlled by main and multiple genes when rice was grown for 62 days after transplanting under alkaline stress. Thirteen QTLs associated with DLR were detected at 20 days to 62 days after transplanting under alkaline stress. Among these, qDLR9-2 located in RM5786-RM160 on chromosome 9 was detected at 34 days, 41 days, 48 days, 55 days, and 62 days, respectively; qDLR4 located in RM3524-RM3866 on chromosome 4 was detected at 34 days, 41 days, and 48 days, respectively; qDLR7-1 located in RM3859-RM320 on chromosome 7 was detected at 20 days and 27 days; and qDLR6-2 in RM1340-RM5957 on chromosome 6 was detected at 55 days and 62 days, respectively. The alleles of both qDLR9-2 and qDLR4 were derived from alkaline sensitive parent ＂Gaochanl06＂. The alleles of both qDLR7-1 and qDLR6-2 were from alkaline tolerant parent Changbai 9. These gene actions showed dominance and over dominance primarily. Six QTLs associated with DSR were detected at 62 days after transplanting under alkaline stress. Among these, qDSR6-2 and qDSR8 were located in RM1340-RM5957 on chromosome 6 and in RM3752-RM404 on chromosome 8, respectively, which were associated with DSR and accounted for 20.32% and 18.86% of the observed phenotypic variation, respectively; qDSR11-2 and qDSR11-3 were located in RM536-RM479 and RM2596-RM286 on chromosome 11, respectively, which were associated with DSR explaining 25.85% and 15.41% of the observed phenotypic variation, respectively. The marker flanking distances of these QTLs were quite far except that of qDSR6-2, which should be researched further.