We study the influence of ionized impurity scattering on the electron transport in resonant-phonon-assisted terahertz （THz） quantum-cascade lasers （QCLs）. We treat the ionized impurity scattering rates within the ...We study the influence of ionized impurity scattering on the electron transport in resonant-phonon-assisted terahertz （THz） quantum-cascade lasers （QCLs）. We treat the ionized impurity scattering rates within the single subband static screening approximation. We find that the ionized impurity scattering supplies an additional current channel across the device,and affects the electrondistribution in different subbands. We conclude that the ionized impurity scattering should be taken into account in the study of the transport properties of resonant-phonon-assisted THz QCLs.展开更多
Arson presents a challenging crime scene for fire investigators worldwide. Key to the investigation of suspected arson cases is the analysis of fire debris for the presence of accelerants or ignitable liquids. This st...Arson presents a challenging crime scene for fire investigators worldwide. Key to the investigation of suspected arson cases is the analysis of fire debris for the presence of accelerants or ignitable liquids. This study has investigated the application and method development of vapor phase mid-Infrared (mid-IR) spectroscopy using a field portable quantum cascade laser (QCL) based system for the detection and identification of accelerant residues such as gasoline, diesel, and ethanol in fire debris. A searchable spectral library of various ignitable fluids and fuel components measured in the vapor phase was constructed that allowed for real-time identification of accelerants present in samples using software developed in-house. Measurement of vapors collected from paper material that had been doused with an accelerant followed by controlled burning and then extinguished with water showed that positive identification could be achieved for gasoline, diesel, and ethanol. This vapor phase mid-IR QCL method is rapid, easy to use, and has the sensitivity and discrimination capability that make it well suited for non-destructive crime scene sample analysis. Sampling and measurement can be performed in minutes with this 7.5 kg instrument. This vibrational spectroscopic method required no time-consuming sample pretreatment or complicated solvent extraction procedure. The results of this initial feasibility study demonstrate that this portable fire debris analyzer would greatly benefit arson investigators performing analysis on-site.展开更多
We report an external cavity quantum cascade laser （EC-QCL） operating near 6.9μm using the Littman Metcalf configuration. The EC-QCL works in a pulsed mode and can be tuned continuously from 1340 to 1640cm^-1 by on...We report an external cavity quantum cascade laser （EC-QCL） operating near 6.9μm using the Littman Metcalf configuration. The EC-QCL works in a pulsed mode and can be tuned continuously from 1340 to 1640cm^-1 by only tilting the tuning mirror. The fine tuning ability of the EC-QCL is demonstrated by measuring the absorption spectrum of water in the ambient air with a lock-in amplifier.展开更多
We report on the design and fabrication of λ-7.2μm distributed feedback quantum cascade lasers lot very high temperature cw operation and low electrical power consumption. The cw operation is reported above 90℃. Fo...We report on the design and fabrication of λ-7.2μm distributed feedback quantum cascade lasers lot very high temperature cw operation and low electrical power consumption. The cw operation is reported above 90℃. For a 2-mm-long and 10-μm-wide laser coated with high-reflectivity on the rear facet, more than 170mW of output power is obtained at 20℃ with a threshold power consumption of 2.4 W, corresponding to 30mW with a threshold power consumption of 3.9 W at 90℃. Robust single-mode emission with a side-mode suppression ratio above 25 dB is continuously tunable by the heat sink temperature or injection current.展开更多
A multimode interference(MMI)structure is designed to simplify the fabrication of quantum cascade laser(QCL)phase-locked arrays.The MMI geometry is optimized with a sufficient output channel distance to accommodate co...A multimode interference(MMI)structure is designed to simplify the fabrication of quantum cascade laser(QCL)phase-locked arrays.The MMI geometry is optimized with a sufficient output channel distance to accommodate conventional photolithography and wet etching process by which power amplifier array is fabricated without using the complicated two-step etching-regrowth or dry etching technique.The far-field pattern with periodically modulated peaks reveals that the beams from the arrays are phase-locked.Furthermore,the frequency tuning performance of the MMI-based phase-locked arrays is studied using the Littrow-configuration external cavity structure.A wavelength tuning range of more than 60 cm^(−1) is demonstrated,which will eventually realize the high power,frequency tunable,large-scale phase-locked arrays,and their application in spectroscopy.展开更多
The pulse generation from active mode-locking terahertz quantum cascade laser is studied by Maxwell-Bloch equations.It is shown that longer dephasing time will lead to multiple pulses generation from the laser.The dep...The pulse generation from active mode-locking terahertz quantum cascade laser is studied by Maxwell-Bloch equations.It is shown that longer dephasing time will lead to multiple pulses generation from the laser.The dependence of output field on modulation length and radio-frequency parameters is obtained.In order to achieve short pulse generation,the DC bias should close to threshold value and modulation length should be shorter than 0.256 mm.The output pulse is unstable and the envelope shows many oscillations in the presence of spatial hole burning,resulting destabilization of mode-locking.展开更多
An external cavity quantum cascade laser （QCL） array with a wide tuning range and high output power is pre- sented. The coherent QCL array combined with a diffraction grating and gold mirror is tuned in the Littrow ...An external cavity quantum cascade laser （QCL） array with a wide tuning range and high output power is pre- sented. The coherent QCL array combined with a diffraction grating and gold mirror is tuned in the Littrow configuration. Taking advantage of the single-lobed fundamental supermode far-field pattern, the tuning capa- bility of 30.6cm-1 is achieved with a fixed injected current of 3.5 A at room temperature. Single-mode emission can be observed in the entire process. The maximum single-mode output power of the external cavity setup is as high as 25mW and is essential in real applications.展开更多
We report on the room-temperature cascade laser （QCL） at λ -4.7μm. cw operation of a surface grating Both grating design and material distributed feedback （DFB） quantum optimization are used to decrease the thre...We report on the room-temperature cascade laser （QCL） at λ -4.7μm. cw operation of a surface grating Both grating design and material distributed feedback （DFB） quantum optimization are used to decrease the threshold current density and to increase the output power. For a high-reflectivity-coated 13-μm-wide and 4- mm-long laser, high wall-plug efficiency of 6% is obtained at 20℃ from a single facet producing over I W of ew output power. The threshold current density of DFB QCL is as low as 1.13kA/cm^2 at 10℃ and 1.34kA/cm2 at 30℃ in cw mode. Stable single-mode emission with a side-mode suppression ratio of about 30 dB is observed in tile working temperature range of 20-50℃.展开更多
This paper describes a promising route for the exploration and development of 3.0 THz sensing and imaging with FET-based power detectors in a standard 65 nm CMOS process.Based on the plasma-wave theory proposed by Dya...This paper describes a promising route for the exploration and development of 3.0 THz sensing and imaging with FET-based power detectors in a standard 65 nm CMOS process.Based on the plasma-wave theory proposed by Dyakonov and Shur,we designed high-responsivity and low-noise multiple detectors for monitoring a pulse-mode 3.0 THz quantum cascade laser(QCL).Furthermore,we present a fully integrated high-speed 32×32-pixel 3.0 THz CMOS image sensor(CIS).The full CIS measures 2.81×5.39 mm^(2) and achieves a 423 V/W responsivity(Rv)and a 5.3 nW integral noise equivalent power(NEP)at room temperature.In experiments,we demonstrate a testing speed reaching 319 fps under continuous-wave(CW)illumina-tion of a 3.0 THz QCL.The results indicate that our terahertz CIS has excellent potential in cost-effective and commercial THz imaging and material detection.展开更多
文摘We study the influence of ionized impurity scattering on the electron transport in resonant-phonon-assisted terahertz （THz） quantum-cascade lasers （QCLs）. We treat the ionized impurity scattering rates within the single subband static screening approximation. We find that the ionized impurity scattering supplies an additional current channel across the device,and affects the electrondistribution in different subbands. We conclude that the ionized impurity scattering should be taken into account in the study of the transport properties of resonant-phonon-assisted THz QCLs.
文摘Arson presents a challenging crime scene for fire investigators worldwide. Key to the investigation of suspected arson cases is the analysis of fire debris for the presence of accelerants or ignitable liquids. This study has investigated the application and method development of vapor phase mid-Infrared (mid-IR) spectroscopy using a field portable quantum cascade laser (QCL) based system for the detection and identification of accelerant residues such as gasoline, diesel, and ethanol in fire debris. A searchable spectral library of various ignitable fluids and fuel components measured in the vapor phase was constructed that allowed for real-time identification of accelerants present in samples using software developed in-house. Measurement of vapors collected from paper material that had been doused with an accelerant followed by controlled burning and then extinguished with water showed that positive identification could be achieved for gasoline, diesel, and ethanol. This vapor phase mid-IR QCL method is rapid, easy to use, and has the sensitivity and discrimination capability that make it well suited for non-destructive crime scene sample analysis. Sampling and measurement can be performed in minutes with this 7.5 kg instrument. This vibrational spectroscopic method required no time-consuming sample pretreatment or complicated solvent extraction procedure. The results of this initial feasibility study demonstrate that this portable fire debris analyzer would greatly benefit arson investigators performing analysis on-site.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11174098 and 11574107the SelfDetermined Research Funds of Central China Normal University under Grant No CCNU15A02034
文摘We report an external cavity quantum cascade laser （EC-QCL） operating near 6.9μm using the Littman Metcalf configuration. The EC-QCL works in a pulsed mode and can be tuned continuously from 1340 to 1640cm^-1 by only tilting the tuning mirror. The fine tuning ability of the EC-QCL is demonstrated by measuring the absorption spectrum of water in the ambient air with a lock-in amplifier.
基金Supported by the National Basic Research Program of China under Grant No 2013CB632801the National Key Research and Development Program under Grant No 2016YFB0402303+2 种基金the National Natural Science Foundation of China under Grant Nos61435014,61627822,61574136 and 61306058the Key Projects of Chinese Academy of Sciences under Grant No ZDRW-XH-2016-4the Beijing Natural Science Foundation under Grant No 4162060
文摘We report on the design and fabrication of λ-7.2μm distributed feedback quantum cascade lasers lot very high temperature cw operation and low electrical power consumption. The cw operation is reported above 90℃. For a 2-mm-long and 10-μm-wide laser coated with high-reflectivity on the rear facet, more than 170mW of output power is obtained at 20℃ with a threshold power consumption of 2.4 W, corresponding to 30mW with a threshold power consumption of 3.9 W at 90℃. Robust single-mode emission with a side-mode suppression ratio above 25 dB is continuously tunable by the heat sink temperature or injection current.
基金supported by the National Basic Research Program of China(Grant Nos.2018YFA0209103 and 2018YFB2200504)the National Natural Science Foundation of China(Grant Nos.61991430,61774146,61790583,61674144,61774150,and 61805168)+1 种基金the Beijing Municipal Science&Technology Commission,China(Grant No.Z201100004020006)the Key Projects of the Chinese Academy of Sciences(Grant Nos.2018147,YJKYYQ20190002,QYZDJ-SSW-JSC027,and XDB43000000).
文摘A multimode interference(MMI)structure is designed to simplify the fabrication of quantum cascade laser(QCL)phase-locked arrays.The MMI geometry is optimized with a sufficient output channel distance to accommodate conventional photolithography and wet etching process by which power amplifier array is fabricated without using the complicated two-step etching-regrowth or dry etching technique.The far-field pattern with periodically modulated peaks reveals that the beams from the arrays are phase-locked.Furthermore,the frequency tuning performance of the MMI-based phase-locked arrays is studied using the Littrow-configuration external cavity structure.A wavelength tuning range of more than 60 cm^(−1) is demonstrated,which will eventually realize the high power,frequency tunable,large-scale phase-locked arrays,and their application in spectroscopy.
基金Project supported by the National Key Research and Development Program of China(Grant No.2017YFF0106302)the National Natural Science Foundation of China(Grant Nos.61975225 and 61927813)Shanghai International Cooperation Project,China(Grant No.18590780100).
文摘The pulse generation from active mode-locking terahertz quantum cascade laser is studied by Maxwell-Bloch equations.It is shown that longer dephasing time will lead to multiple pulses generation from the laser.The dependence of output field on modulation length and radio-frequency parameters is obtained.In order to achieve short pulse generation,the DC bias should close to threshold value and modulation length should be shorter than 0.256 mm.The output pulse is unstable and the envelope shows many oscillations in the presence of spatial hole burning,resulting destabilization of mode-locking.
基金Supported by the National Basic Research Program of China under Grant No 2013CB632801the National Key Research and Development Program of China under Grant No 2016YFB0402303+2 种基金the National Natural Science Foundation of China under Grant Nos 61435014,61627822,61574136,61306058 and 61404131the Key Projects of Chinese Academy of Sciences under Grant No ZDRW-XH-2016-4the Beijing Natural Science Foundation under Grant No 4162060
文摘An external cavity quantum cascade laser （QCL） array with a wide tuning range and high output power is pre- sented. The coherent QCL array combined with a diffraction grating and gold mirror is tuned in the Littrow configuration. Taking advantage of the single-lobed fundamental supermode far-field pattern, the tuning capa- bility of 30.6cm-1 is achieved with a fixed injected current of 3.5 A at room temperature. Single-mode emission can be observed in the entire process. The maximum single-mode output power of the external cavity setup is as high as 25mW and is essential in real applications.
基金Supported by the National Basic Research Program of China under Grant Nos 2013CB632801 and 2013CB632803the National Natural Science Foundation of China under Grant Nos 61435014,61306058 and 61274094the Beijing Natural Science Foundation under Grant No 4144086
文摘We report on the room-temperature cascade laser （QCL） at λ -4.7μm. cw operation of a surface grating Both grating design and material distributed feedback （DFB） quantum optimization are used to decrease the threshold current density and to increase the output power. For a high-reflectivity-coated 13-μm-wide and 4- mm-long laser, high wall-plug efficiency of 6% is obtained at 20℃ from a single facet producing over I W of ew output power. The threshold current density of DFB QCL is as low as 1.13kA/cm^2 at 10℃ and 1.34kA/cm2 at 30℃ in cw mode. Stable single-mode emission with a side-mode suppression ratio of about 30 dB is observed in tile working temperature range of 20-50℃.
基金Project supported by the National Natural Science Foundation of China under Grant Nos.61874107,62075211.
文摘This paper describes a promising route for the exploration and development of 3.0 THz sensing and imaging with FET-based power detectors in a standard 65 nm CMOS process.Based on the plasma-wave theory proposed by Dyakonov and Shur,we designed high-responsivity and low-noise multiple detectors for monitoring a pulse-mode 3.0 THz quantum cascade laser(QCL).Furthermore,we present a fully integrated high-speed 32×32-pixel 3.0 THz CMOS image sensor(CIS).The full CIS measures 2.81×5.39 mm^(2) and achieves a 423 V/W responsivity(Rv)and a 5.3 nW integral noise equivalent power(NEP)at room temperature.In experiments,we demonstrate a testing speed reaching 319 fps under continuous-wave(CW)illumina-tion of a 3.0 THz QCL.The results indicate that our terahertz CIS has excellent potential in cost-effective and commercial THz imaging and material detection.
