The Dissolution of the Cellulose in the N - ethylmorpholine - N - oxide (NMMO) - Water System with Hydrothermolysis

Tbe N - methylmorpholine - N - oxide (NMMO) - water solvent was used to dissolve the cellulose that was achieved by means of hydrothermolysis. Sample B, RS and WS used here were made from beech, rice straw and wheat straw respectively. They could be completely dissolved in the NMMO - water system. A commercial a - cellulose was employed in the comparative experiment. The entire dissolving process was Investigated. At a given temperature, the vacuum condition applied to the mixture of the cellulose and NMMO - water was very important in order to accelerate the dissolution of cellulose and shorten the dissolving period. After dissolution, degree of polymerization (DP) of all samples was measured by viscometry. Longer dissolving time and higher temperature could cause the degradation of the dissolved cellulose. N- propyl gallate could prevent the degradation of cellulose during the process of dissolution.

Plasma Post Oxidation of Plasma Nitrocarburized SKD 61 Steel

Plasma nitrocarburizing and plasma oxidizing treatments were performed to improve the wear and corrosion resistance of SKD 61 steel.Plasma nitrocarburizing was conducted for 12 h at 540℃in the nitrogen, hydrogen and methane atmosphere to produce theε-Fe-（2-3）（N,C） phase.The compound layer produced by plasma nitrocarburising was predominantly composed ofε-phase,with a small proportion ofγ′-Fe-4 （N,C） phase. The thickness of the compound layer and the diffusion layer are about 10μm and about 200μm,respectively. Plasma post oxidation was performed on the nitrocarburized samples with various oxygen/hydrogen ratio at constant temperature of 500℃for 1 h.The very thin magnetite （Fe-3O-4） layer of 1-2μm in thickness on top of the compound layer was obtained.Anodic polarization test revealed that plasma nitrocarburizing process contributed a significant improvement of corrosion resistance of SKD 61 steel.However,the corrosion characteristics of the nitrocarburized compound layer was deteriorated by oxidation treatment.

Advanced glycation end products induce neural tube defects through elevating oxidative stress in mice

Our previous study showed an association between advanced glycation end products （AGEs） and neural tube defects （NTDs）. To understand the molecular mechanisms underlying the effect of AGEs on neural tube development, C57BL/6 female mice were fed for 4 weeks with com- mercial food containing 3% advanced glycation end product bovine serum albumin （AGE-BSA） or 3% bovine serum albumin （BSA） as a control. After mating mice, oxidative stress markers including malondialdehyde and H202 were measured at embryonic day 7.5 （E7.5） of ges- tation, and the level of intracellular reactive oxygen species （ROS） in embryonic cells was determined at E8.5. In addition to evaluating NTDs, an enzyme-linked immunosorbent assay was used to determine the effect of embryonic protein administration on the N-（carboxymethyl） lysine reactivity of acid and carboxyethyl lysine antibodies at E10.5. The results showed a remarkable increase in the incidence of NTDs at El0.5 in embryos of mice fed with AGE-BSA （no hyperglycemia） compared with control mice. Moreover, embryonic protein administration resulted in a noticeable increase in the reactivity of N-（carboxymethyl） lysine and N（ε）-（carboxyethyl） lysine antibodies. Malondialdehyde and H2O2 levels in embryonic cells were increased at E7.5, followed by increased intracellular ROS levels at E8.5. Vitamin E supplementation could partially recover these phenomena. Collectively, these results suggest that AGE-BSA could induce NTDs in the absence of hyperglycemia by an underlying mechanism that is at least partially associated with its capacity to increase embryonic oxidative stress levels.

Effect of Ti(C,N) on Properties of Low-carbon MgO-C Bricks

The effect of Ti （ C, N） on properties of low-carbon MgO - C bricks was investigated. The phase composition and the microstructure of the matrix of low-carbon MgO - C brick containing Ti （ C, N） were studied by XRD and SEM analysis together with EDS. The results showed that Ti （ C, N） distributed in the matrix of lowcarbon MgO - C brick uniformly after being treated at 1 600 ~C for 3 h in coke powder bed, and Ti （C, N） and MgO formed a solid solution. After the treatment at 1 600 ℃ for 3 h in coke powder bed, the bulk density and cold crushing strength of low-carbon MgO - C brick with Ti （ C, N） decreased, and the apparent porosity and linear change rate of specimens increased. The oxidation resistance of low-carbon MgO - C brick with Ti（ C, N） was superior to that of low-carbon MgO - C brick with no additives, but inferior to that of low-car- bon MgO - C brick with Al powder. The slag resistance of the specimen with Ti （ C, N） was excellent as well.

Plasma post oxidation of nitrocarburized AISI 4140 steel

Plasma nitrocarburizing and plasma oxidizing treatments were performed to improve the wear and corrosion resistance of AISI 4140 steel. Plasma nitrocarburizing was conducted for 3 h at 570 ℃ in the nitrogen, hydrogen and methane atmosphere to produce the ε-Fe2-3(N,C) phase. It was found that the compound layer produced by plasma nitrocarburising was predominantly composed of ε-phase, with a small proportion of γ′-Fe4(N,C) phase. The thickness of the compound layer was about 10 μm and the diffusion layer was about 300 μm in thickness, respectively. Plasma post oxidation was performed on the nitrocarburized samples with various oxygen/hydrogen ratio at a constant temperature of 500 ℃ for 1 h. The very thin magnetite (Fe3O4) layer 1-2 μm in thickness on top of the compound layer was obtained by plasma post oxidation. It was confirmed that the corrosion characteristics of the nitrocarburized compound layer can be further improved by the application of the superficial magnetite layer.

Nitrogen cycling and environmental impacts in upland agricultural soils in North China： A review

The upland agricultural soils in North China are distributed north of a line between the Kunlun Mountains, the Qinling Mountains and the Huaihe River. They occur in arid, semi-arid and semi-humid regions and crop production often depends on rain-fed or irrigation to supplement rainfall. This paper summarizes the characteristics of gross nitrogen（N） transformation, the fate of N fertilizer and soil N as well as the N loss pathway, and makes suggestions for proper N management in the region. The soils of the region are characterized by strong N mineralization and nitrification, and weak immobilization and denitrification ability, which lead to the production and accumulation of nitrate in the soil profile. Large amounts of accumulated nitrate have been observed in the vadose-zone in soils due to excess N fertilization in the past three decades, and this nitrate is subject to occasional leaching which leads to groundwater nitrate contamination. Under farmer＇s conventional high N fertilization practice in the winter wheat-summer maize rotation system（N application rate was approximately 600 kg ha–1 yr–1）, crop N uptake, soil residual N, NH_3 volatilization, NO_3~– leaching, and denitrification loss accounted for around 27, 30, 23, 18 and 2% of the applied fertilizer N, respectively. NH_3 volatilization and NO_3~– leaching were the most important N loss pathways while soil residual N was an important fate of N fertilizer for replenishing soil N depletion from crop production. The upland agricultural soils in North China are a large source of N_2O and total emissions in this region make up a large proportion（approximately 54%） of Chinese cropland N_2O emissions. The “non-coupled strong ammonia oxidation” process is an important mechanism of N_2O production. Slowing down ammonia oxidation after ammonium-N fertilizer or urea application and avoiding transient high soil NH4＋ concentrations are key measures for reducing N_2O emissions in this region. Further N management should aim to minimize N losses from crop and livestock production, and increase the recycling of manure and straw back to cropland. We also recommend adoption of the 4 R（Right soure, Right rate, Right time, Right place） fertilization techniques to realize proper N fertilizer management, and improving application methods or modifying fertilizer types to reduce NH_3 volatilization, improving water management to reduce NO_3~– leaching, and controlling the strong ammonia oxidation process to abate N_2O emission. Future research should focus on the study of the trade-off effects among different N loss pathways under different N application methods or fertilizer products.

HPLC法测定富马酸喹硫平缓释片中喹硫平氮氧化物及其它有关物质

目的:建立HPLC法测定富马酸喹硫平缓释片中有关物质的测定方法。方法:采用Thermo C8(4.6mm×250mm,5μm)色谱柱;以乙腈-甲醇-0.02mol·L-1磷酸氢二铵溶液(6:49:45)为流动相,检测波长为230nm,流速为1.0mL·min-1。结果:该法可以检测到6个杂质,各杂质峰与喹硫平峰的分离度良好。在0.0446～2.676μg·mL-1范围内,喹硫平氮氧化物峰面积和浓度呈良好的线性关系,回归方程:y=83826x-1135.9,相关系数γ=0.9999,喹硫平氮氧化物的平均回收率是101.0%(RSD=0.04%)。结论:本方法简便,准确,重现性好,能够用于富马酸喹硫平缓释片的质量控制。