Precise Synthesis of Acrylate Copolymer via RAFT Polymerization and Its Application

A series of different sequence structure containing stearyl acrylate (SA) and hydroxyethyl acrylate (HEA) copolymer were synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization. The crystallization property of PHEA-b-PSA, PHEA-b-PSA-b-PHEA, PSA-b-PHEA-b-PSA, PHEA-co-PSA, and PHEA-grad-b-PSA were characterized by Differential Scanning Calorimetry (DSC). The condensed structure of different sequence copolymers were investigated using small-angle X-ray scattering (SAXS). A series of copolymers with different sequence structure were coated on the surface of polyester fabric, which can be found that PHEA-b-PSA-b-PHEA block copolymer has good water repellency.

Synthesis of Thermoresponsive Poly( diethyleneglycol methacrylate-co-6-Ovinyladipoyl-D-glucopyranose) Glycopolymer via RAFT Polymerization

The monomer 6-O-vinyladipoyl-D-glucopyranose( VAG)was synthesized by lipase catalyzed trans-esterification of divinyladipate with D-glucopyranose. A novel double hydrophilic glycopolymer poly( diethyleneglycol methacrylate-co-6-Ovinyladipoyl-D-glucopyranose)( P( DEGMA-co-VAG)) with narrow polydispersity( PDI) and thermosensitivity was prepared by reversible addition-fragmentation chain transfer( RAFT)polymerization. P( DEGMA-co-VAG) was characterized by1 H NMR,FTIR and gel permeation chromatography( GPC). The characterization of UV-visible spectroscopy showed that the micelles from glycopolymer P( DEGMA-co-VAG) were thermo-responsive and the low critical solution temperature( LCST) could be controlled by the molar ratio of monomers. When the molar ratio of DEGMA and VAG was 2∶ 1,the LCST of P( DEGMA-co-VAG) was36 ℃ in aqueous solution,which could form nano micelles in the human body environment. It was found that P( DEGMA-co-VAG)was non-toxic at 0. 1-1 mg / m L concentrations when incubated with pig iliac endothelial cells( PIECs) for 24 h. Thus,the synthesized glycopolymers has great potential as drug delivery carriers.

Organic Brønsted Acid-Catalyzed Stereoselective Cationic RAFT Polymerization:The Effect of RAFT Agents

The tacticity of vinyl polymers is a key factor affecting the properties of materials.Recently,organic Brønsted acids have been demonstrated as effective catalysts for the development of highly stereoselective cationic reversible addition-fragmentation chain transfer(RAFT)polymerizations of vinyl ethers,in which the use of RAFT agents could allow the control the molecular weight and tacticity of polymer products simultaneously.However,the effect of RAFT agents on the tacticity-regulation remains elusive and lacks of investigation.In this study,we synthesized four types of RAFT agents and evaluated their influence in the stereoselective cationic polymerization of isobutyl vinyl ether in the presence of PADI as a Brønsted acid catalyst,which unveils that the Z group of RAFT agents could not only affect the polydispersity of the products,but also exert a profound effect on the stereoselectivity.After extensive screening of the RAFT agents,high stereoregularity(isotacticity,90%m)was obtained when using dithiocarbonate ester-type RAFT agents with a benzyloxy Z group.

Persistent radical anion of perylene dianhydride:an emerging metal-free photocatalyst for near-infrared photocontrolled RAFT polymerization

Developing a new type of photocatalyst(PC) and catalytic mechanism for near-infrared(NIR) photocontrolled reversibledeactivation radical polymerization(RDRP) system is charming but challenging.Herein,a novel PC of the persistent radical anion(PRA)(possessing the properties of both radical and anion) was developed for NIR photocontrolled reversible additionfragmentation chain transfer(RAFT) polymerization,enabling successful polymerization while gaining a deep insight into the mechanism of photo-induced electron transfer RAFT(PET-RAFT) polymerization.Different from the conventional and wellaccepted reductive quenching(RQ) pathway,in which the radical anion intermediates of PCs(PCs^(·-)) must be generated in an excited state(ES),here,the PRA(3,4,9,10-perylenetetracarboxylic dianhydride radical anion(PTCDA^(·-))) could generate conveniently in situ in the ground state(GS) and subsequently serve as highly efficient PC in the NIR region(740–850 nm).The successful implementation of this strategy elucidates the peculiar role played by light and the real way of electron transfer behaviors.In fact,the transfer of a single electron from PRA to chain transfer agent(CTA) and cleavage of the C–S bonds is a process from ES to GS,rather than always from GS(PCs^(·-)) to GS(CTA) in the RQ pathway as is well known to all.In addition,the excellent spatial-temporal control and powerful penetration ability of the NIR light were also confirmed by this PRAcatalyzed polymerization system.

Piezoelectric Zinc Oxides with High Polar Facets Ratios for Mechanically Controlled RAFT Polymerization

Mechanoredox chemistry that uses highly polarized piezoelectric materials as mechanoredox catalysts to promote redox reactions has emerged recently.It provides an alternative approach alongside the existing polymerization methods.Despite recent accomplishments,determining the quantitative relationship between the structure of ZnO and its catalytic performance for polymerization is still challenging.Herein,we prepared various ZnO crystals with different polar facets ratios to achieve efficient mechanically induced reversible addition-fragmentation chain transfer polymerization(mechano-RAFT).ZnO prepared from Zn(NO3)2 showed a high polar facet ratio of 1.66 and offered the highest catalytic activity among all ZnO samples.A near-quantitative initiator efficiency of 99.5%and narrow molecular weight distribution were achieved for the polymerization of n-butyl acrylate.Furthermore,the high chain-end fidelity and chain extension capability were also evidenced by MALDI-TOF MS and GPC analysis.This work highlighted the significant contribution of polar facets in ZnO to its catalytic activity and will guide the design of mechanoredox catalysis with superior catalytic performance in the future.

Precision Synthesis of End-Functionalized Star Poly(vinyl alcohol)s by RAFT Polymerization and Post-polymerization Modification

Poly(vinyl alcohol)(PVA)has been widely used in industrial and consumer products.In this study,we aimed to address this challenge by synthesizing well-defined multiarm poly(vinyl acetate)(PVAc)through the use of nonhydrolyzable vinyl ethertype multifunctional RAFT agents.The control over molecular weights was achieved by the RAFT process to afford polymers with dominant head-to-head linkages at the terminal.Especially,quantitative end-functionalization of the synthesized PVAc was performed using Michael thiol−ene or disulfide exchange reactions.Consequently,saponification of the PVAc enabled the synthesis of end-functionalized multiarm PVA in an efficient manner.This straightforward approach afforded well-defined functional PVAs,which enable further chemical modification,thus widening the utility of PVA in a range of applications,such as precisely controlled network synthesis and bioconjugation.

Progress on intelligent hydrogels based on RAFT polymerization:Design strategy, fabrication and the applications for controlled drug delivery

Although intelligent hydrogels have shown bright potential application in biomedical fields,they were prepared by conventional methods and still face many serious challenges,such as uncontrollable stimulus-response and low response sensitivity.Recently,RAFT polymerization provides a versatile strategy for the fabrication of intelligent hydrogels with improved stimulus-response properties,owing to the ability to efficiently construct hydrogel precursors with well-defined structure,such as block copolymer,graft copolymer,star copolymer.In this review,we summarized the recent progress on intelligent hydrogels based on RAFT polymerization with emphasis on their fabrication strategies and applications for controlled drug delivery.

Synthesis of polyacrylonitrile-block-polydimethylsiloxane-block-polyacrylonitrile triblock copolymers via RAFT polymerization

A new A-B-A type of block copolymers,polyacrylonitrile-block-polydimethylsiloxane-block-polyacrylonitrile（PAN-b-PDMSb-PAN）,which comprises two polymer blocks of different polarities and compatibilities,were synthesized for the first time via reversible addition-fragmentation chain transfer polymerization.Reaction kinetics was investigated.PAN-b-PDMS-b-PAN films were prepared by spin-coating on glass chips.Significant order on the film surface morphologies was observed.

Aqueous RAFT Polymerization of Acrylamide： A Convenient Method for Polyacrylamide with Narrow Molecular Weight Distribution

Controlled and homogeneous flee-radical polymerization of acrylamide （AM） in aqueous phase was realized by using S,S＇-bis（α, α＇-dimethyl-α＂-acetic acid）-trithiocarbonate as a reversible addition-fragmentation transfer （RAFT） agent. Linear increases in molecular weight with conversion and narrow molecular weight distribution were observed for polyacrylamide （PAM） throughout the polymerization. By this method, PAMs with controlled molecular weight （up to 1.0 ~ 106） and narrow molecular weight distribution （Mw/Mn 〈 1.2） were prepared. This study provides an effective method for synthesis of PAMs with narrow molecular weight distribution under environmentally friendly conditions.

RAFT Miniemulsion Polymerization of MMA with Cumyl Dithiobenzoate as Chain Transfer Agent

Reversible addition-fragmentation transfer （RAPT） miniemulsion polymerizations for PMMA with cumyl dithiobenzoate （CDB） as a chain transfer agent （CTA） has been carried out. Higher temperature made the polymerization much faster and the PDI remained below 1.20, when the temperature was upon 70 ℃.

The Doubly Thermo-responsive Triblock Copolymer Nanoparticles Prepared through Seeded RAFT Polymerization

The doubly thermo-responsive triblock copolymer nanoparticles of polystyrene-block-poly（N- isopropylacrylamide）-block-poly[N,N-（dimethylamino） ethyl methacrylate] （PS-b-PNIPAM-b-PDMAEMA） are successfully prepared through the seeded RAFT polymerization in situ by using the PS-b-PNIPAM-TTC diblock copolymer nanoparticles as the seed. The seeded RAFT polymerization undergoes a pseudo-first-order kinetics procedure, and the molecular weight increases with the monomer conversion linearly. The hydrodynamic diameter （Dh） of the triblock copolymer nanoparticles increases with the extension of the PDMAEMA block. In addition, the double thermo-response behavior of the PS-b-PNIPAM-b-PDMAEMA nanoparticles is detected by turbidity analysis, temperature-dependent 1H-NMR analysis, and DLS analysis. The seeded RAFT polymerization is believed as a valid method to prepare triblock copolymer nanoparticles containing two thermo-responsive blocks.

Dendritic cells maturation facilitated by group-adjustable lipopolysaccharide analogues synthesized via RAFT polymerization

Transforming immature DCs into mature state to activate cellular immunity is a critical step in initiating immunoprophylaxis and immunotherapy.Lipopolysaccharides(LPS)can promote DCs maturation by binding receptor on DCs surface,but their clinical application is limited due to biological toxicity.Although many LPS analogues have been developed,complex synthesis and purification hinder their practical application.Here,we propose a novel and simple strategy to synthesize LPS analogues with adjustable structural units.Using monomer units similar to the key functional groups of LPS,we synthesize LPS analogues with different group ratios by RAFT polymerization.The obtained analogues have little negative effect on cell viability.Compared with LPS,the analogues show greater promoting effect on DCs maturation.And the analogues can be applied to different scenarios since the degrees of promoting DCs maturation by LPS analogues with different group ratios are different.This strategy provides a new direction for synthesizing LPS analogues,and it has the potential to produce LPS analogues on a large scale with tunable promoting DCs maturation effect.

STYRENE POLYMERIZATION MEDIATED BY CYCLIC TRITHIOCARBONATE AS RAFT AGENT

The novel cyclic trithiocarbonate was synthesized by dialkylation of trithiocarbonate anion with 2,2＇- bis（bromomethyl）biphenyl in a two-phase system using an onium salt as a phase-transfer agent. Styrene polymerization was carried out in the presence of cyclic trithiocarbonate （CTTC）. CTTC undergoes ring opening-polymerization and the incorporated trithiocarbonate moiety derived from CTTC performs as the reversible addition-fragmentation chain transfer （RAFT） agent. Through this mechanism, multiblock polys-tyrenes containing various narrow polydispersity blocks can be prepared.

Highly Efficient and Well-controlled Ambient Temperature Raft Polymerization Under Visible Light Radiation

1 Results A range of well-defined polymers and their corresponding block copolymers were synthesized via ambient temperature RAFT polymerization under environmentally friendly visible light radiation,using a (2,4,6-trimethylbenzoyl) diphenylphosphine oxide (TPO) photo-initiator[1].The results indicated that the photolysis of chain transfer agent (CTA) functionalities was significantly suppressed under visible light radiation,thus exerting well control over RAFT process,leading to a remarkably living beh...

Self-assembly of Gradient Copolymer Synthesized by Spontaneous Batch RAFT Emulsion Polymerization and Its Application on Encapsulating Ag Nanoparticles

The gradient copolymers of acrylic acid and trifluoroethyl methacrylate（coded as P（TFEMAgrad-AA）） were synthesized via reversible addition-fragmentation transfer（RAFT） emulsifier-free emulsion polymerization. The spontaneous batch feeding approach was used to control the gradient chain sequence. Transmission electron microscopy（TEM） analysis revealed that the P（TFEMA-grad-AA） can self-assemble to form spherical micelles, rodlike micelles or vesicles in selective solvents. Morphological transition of the P（TFEMA-grad-AA） micelles was sensitive to the water content of the dioxane/water mixed solvent. More interestingly, Ag nanoparticles（NPs） were encapsulated by the P（TFEMA-grad-AA） micelles during the selfassembly process. The gradient chain sequence made the Ag NPs easily enter the core of the micelles, even when P（TFEMA-grad-AA） had less hydrophobic fluoro-units and more hydrophilic units. TEM images with energy dispersive spectrometer indicated that the nanocomposite micelles consisted of a Ag NPs core and a gradient copolymer shell.

Oxidation-responsive framboidal triblock copolymer vesicles prepared by photoinitiated RAFT seeded emulsion polymerization

Stimulus-responsive vesicles have broad applications in a variety of areas. Herein, oxidation-responsive framboidal triblock copolymer vesicles are prepared by photoinitiated RAFT seeded emulsion polymerization of a thioether-functionalized monomer using diblock copolymer vesicles as seeds. The obtained framboidal vesicles can transform into worms or spheres in the presence of reactive oxygen species,which can be further used for controlled release of cargos(e.g., silica nanoparticles).

Conventional Radical and RAFT Alternating Copolymerizations of Hydroxyalkyl Vinyl Ethers and Dialkyl Maleates

The alternating copolymerization of hydroxyalkyl vinyl ethers and dialkyl maleates is investigated by conventional radical polymerization and reversible addition-fragmentation chain transfer polymerization(RAFT).The influence of comonomer structure,comonomer feeding ratios,and monomer concentrations on the copolymerization and the copolymer structure have been investigated systematically.With 2-hydroxyethyl vinyl ether(HEVE)and dimethyl maleates(DMM)as comonomers,a well-defined alternating copolymer is prepared with M_(n)=3400 and M_(w)/M_(n)=1.93 up to 71.6% monomer.The alternating sequential chain structure of the copolymers has been proved by both NMR and matrixassisted laser desorption/ionization time-of-flight mass spectrometry(MALDI-TOF MS).The experimental reactivity ratios and theoretical calculated highest occupied molecular orbital and the lowest unoccupied molecular orbital of vinyl ethers and alkyl maleates support that these monomer pairs have tendency to form alternating copolymers.With 2-cyanopropan-2-yl N-methyl-N-(pyridin-4-yl)carbamodithioate as the RAFT agent,the molecular weight of HEVE and DMM copolymer increases with the monomer conversion,demonstrating a controlled radical polymerization feature with well-controlled molecular weight and relatively narrower molecular weight distribution.With alternating copolymer of HEVE and DMM as macro-CTA(M_(n)=5200 and M_(w)/M_(n)=1.46),both the chain extension with HEVE and DMM(M_(n)=10400 and M_(w)/M_(n)=1.72)and block copolymerization with vinyl acetate have been successfully achieved(M_(n)=8500 and M_(w)/M_(n)=1.52).

In Situ Synthesis of Branched Block Copolymer Assemblies via RAFT Dispersion Polymerization Using Branched Macro-RAFT Agents

Here,we demonstrate the use of branched macromolecular reversible addition-fragmentation chain transfer (macro-RAFT) agents in RAFT dispersion polymerization,to access branched block copolymers as well as well-defined branched block copolymer assemblies.Two types of branched macro-RAFT agents were first synthesized by using either a monofunctional chain transfer monomer or a difunctional chain transfer monomer in RAFT polymerization,and subsequently utilized in RAFT dispersion polymerization.It was found that only branched macro-RAFT agents synthesized from the difunctional chain transfer monomer could lead to colloidally stable assemblies with well-defined morphologies.Reaction conditions including monomer concentration,degree of polymerization (DP) of the core-forming block,and DP of the solvophilic segment on morphologies of branched block copolymer assemblies were investigated in detail.Size exclusion chromatography (SEC) analysis further confirmed the successful formation of branched block copolymers by using branched macro-RAFT agents.This work on the synthesis of branched block copolymer assemblies by RAFT dispersion polymerization offers new opportunities for the rational design of polymer assemblies with well-defined structures.

Photoinduced RAFT Step-Growth Polymerization toward Degradable Living Polymer Networks

The application of reversible degenerative radical polymerization(RDRP)in the construction of polymer networks(PNs)provides a facile and convenient way to fabricate 3D objects with the ability to be posttransformed.However,the polymerization mechanism mainly relies on chain-growth polymerization,which limits its wide application for various polymeric materials with different functionalities.

In Situ Synthesis of Block Copolymer Nano-assemblies by Polymerization- induced Self-assembly under Heterogeneous Condition

Controlled synthesis of amphiphilic block copolymer nanoparticles in a convenient way is an important and interest topic in polymer science. In this review, three formulations of polymerization-induced self-assembly to in situ synthesize block copolymer nanoparticles are briefly introduced, which perform by reversible addition-fragmentation chain transfer （RAFT） polymerization under heterogeneous conditions, e.g., aqueous emulsion RAFT polymerization, dispersion RAFT polymerization and especially the recently proposed seeded RAFT polymerization. The latest developments in several selected areas on the synthesis of block copolymer nano-assemblies are highlighted.