This paper conducts a comparative study on seismic damage to reinforced concrete(RC)bridges,using three damage models:Park and Ang,Hindi and Sexsmith,and input energy-based damage(IEBD)indices,and presents a global cu...This paper conducts a comparative study on seismic damage to reinforced concrete(RC)bridges,using three damage models:Park and Ang,Hindi and Sexsmith,and input energy-based damage(IEBD)indices,and presents a global cumulative damage model based on the IEBD index to establish a practical damage assessment of an overall bridge system.A series of RC bridges are studied under seismic loadings,and to compare the efficiency and reliability of the damage indices,damage curves of RC piers are developed,and damage levels of piers are calculated at design basis earthquake(DBE)and maximum considered earthquake(MCE)levels.The global cumulative damage index is calculated for bridge models regarding damage values of components.The results indicate that the IEBD index shows a gradual progression of damage and provides reasonable values for different damage levels of piers compared to two other damage indices.Moreover,the global cumulative damage index shows the impact of induced damage to a certain component regarding the damage level of the overall bridge system.Moreover,this new approach is a relatively simple and practical tool for seismic damage assessment of RC bridge systems,which can be implemented in finite element models,particularly in the absence of experimental data.展开更多
A three dimensional finite element of nonlinear pushover analysis for short span Reinforced Concrete (RC) bridge with circular piers cross section is modeling to present effects of soil structural interaction (SSI). S...A three dimensional finite element of nonlinear pushover analysis for short span Reinforced Concrete (RC) bridge with circular piers cross section is modeling to present effects of soil structural interaction (SSI). Structural elements models are including linear foundation springs modeling, and nonlinear RC piers modeling. The paper succeeded to present the SSI effects of nonlinear pushover analysis of short spans RC bridges to determine the significant effects on dynamic characteristics and displacement capacity of short span RC bridges performance;that is increasing within range 11% to 20% compared to baseline pushover analysis of bridge without SSI effects. Results show the bridge stiffness decreases due to SSI effects on the bridge support for more flexible soils types that generates large displacement, with corresponding less base shear in bridge piers and footings by average percentage 12% and 18%, which is important for structural evaluation for new bridge construction and also, for strengthening and repair works evaluation of existing bridges.展开更多
In recent earthquakes, a large number of reinforced concrete （RC） bridges were severely damaged due to mixed flexure-shear failure modes of the bridge piers. An integrated experimental and finite element （FE） anal...In recent earthquakes, a large number of reinforced concrete （RC） bridges were severely damaged due to mixed flexure-shear failure modes of the bridge piers. An integrated experimental and finite element （FE） analysis study is described in this paper to study the seismic performance of the bridge piers that failed in flexure-shear modes. In the first part, a nonlinear cyclic loading test on six RC bridge piers with circular cross sections is carried out experimentally. The damage states, ductility and energy dissipation parameters, stiffness degradation and shear strength of the piers are studied and compared with each other. The experimental results suggest that all the piers exhibit stable flexural response at displacement ductilities up to four before exhibiting brittle shear failure. The ultimate performance of the piers is dominated by shear capacity due to significant shear cracking, and in some cases, rupturing of spiral bars. In the second part, modeling approaches describing the hysteretic behavior of the piers are investigated by using ANSYS software. A set of models with different parameters is selected and evaluated through comparison with experimental results. The influences of the shear retention coefficients between concrete cracks, the Bauschinger effect in longitudinal reinforcement, the bond-slip relationship between the longitudinal reinforcement and the concrete and the concrete failure surface on the simulated hysteretic curves are discussed. Then, a modified analysis model is presented and its accuracy is verified by comparing the simulated results with experimental ones. This research uses models available in commercial FE codes and is intended for researchers and engineers interested in using ANSYS software to predict the hysteretic behavior of reinforced concrete structures.展开更多
This paper attempts to explore potential benefits of form in a deck-type reinforced concrete（RC） arch bridge in connection with its overall seismic behavior and performance. Through a detailed three-dimensional fini...This paper attempts to explore potential benefits of form in a deck-type reinforced concrete（RC） arch bridge in connection with its overall seismic behavior and performance. Through a detailed three-dimensional finite element modeling and analysis of an actual existing deck-type RC arch bridge, some useful quantitative information have been derived that may serve for a better understanding of the seismic behavior of such arch bridges. A series of the nonlinear dynamic analyses has been carried out under the action of seven different time histories of ground motion scaled to the AASHTO 2012 response spectrum. The concept of demand to capacity ratios has been employed to provide an initial estimation of the seismic performance of the bridge members. As a consequence of the structural form, a particular type of irregularity is introduced due to variable heights of columns transferring the deck loads to the main arch. Hence, a particular attention has been paid to the internal force/moment distributions within the short, medium, and long columns as well as along the main arch. A study of the effects of the vertical component of ground motion has demonstrated the need for the inclusion of these effects in the analysis of such bridges.展开更多
NLTHA （nonlinear time history analysis） is impractical for widespread used by the professional engineer because it requires long and inefficient computational time involving complexities when six DOF （degree of fre...NLTHA （nonlinear time history analysis） is impractical for widespread used by the professional engineer because it requires long and inefficient computational time involving complexities when six DOF （degree of freedom） per node is applied. The NLTHA nowadays is predicted by MPA （modal pushover analysis）. In this method, effects of higher modes on the dynamic response are considered to estimate seismic demands for structures. In this study, the effect of the reduction of number of DOF is analyzed using 3D NLTHA together with MPA of a rigid connection RC bridge under large earthquake motion. The results are compared with the 6 DOF NLTHA in terms of response of the structure and CPU time to obtain the most efficient computational effort. Result of NLTHA showed that the computational time of the structure both for 4 DOF （without two lateral torsional effects） and 3 DOF （without two lateral torsional and vertical displacements） was reduced significantly compared to the structure using 6 DOF. The reduction of computational time was close to fifty percent both for 4 and 3 DOF＇s. When the maximum responses between NLTHA and MPA are compared, it is found that the differences are insignificant.展开更多
This paper is dedicated to the study of the seismic performance of an existing RC （reinforced concrete） bridge localized in a region of moderate seismicity. The bridge has six spans and piers with very different hei...This paper is dedicated to the study of the seismic performance of an existing RC （reinforced concrete） bridge localized in a region of moderate seismicity. The bridge has six spans and piers with very different heights, three of which are monolithically connected to the deck. To understand the roles of the different pier sizes in the overall behavior, several analyses were carried out in the longitudinal direction： （1） linear dynamic approach; （2） non-linear static approach; （3） non-linear dynamic approach. Linear dynamic analysis was made in order to design the bridge for the ultimate limit state considering the largest value of the ductility factor. No safety verification was made for the other loads. Using non-linear static analyses, sensitivity was performed to check the influence of reinforcement quantities of each pier on the overall behavior of the bridge under Lisbon seismic action. For the non-linear dynamic approach, a series of strong motion records compatible with the EC-8 spectrum for Lisbon area were generated. The very same combinations of reinforcement quantities were studied. Comparisons between static and dynamic non-linear analysis were made to confirm the validity of the first one in the case under analysis, where the period of vibration is quite high.展开更多
文摘This paper conducts a comparative study on seismic damage to reinforced concrete(RC)bridges,using three damage models:Park and Ang,Hindi and Sexsmith,and input energy-based damage(IEBD)indices,and presents a global cumulative damage model based on the IEBD index to establish a practical damage assessment of an overall bridge system.A series of RC bridges are studied under seismic loadings,and to compare the efficiency and reliability of the damage indices,damage curves of RC piers are developed,and damage levels of piers are calculated at design basis earthquake(DBE)and maximum considered earthquake(MCE)levels.The global cumulative damage index is calculated for bridge models regarding damage values of components.The results indicate that the IEBD index shows a gradual progression of damage and provides reasonable values for different damage levels of piers compared to two other damage indices.Moreover,the global cumulative damage index shows the impact of induced damage to a certain component regarding the damage level of the overall bridge system.Moreover,this new approach is a relatively simple and practical tool for seismic damage assessment of RC bridge systems,which can be implemented in finite element models,particularly in the absence of experimental data.
文摘A three dimensional finite element of nonlinear pushover analysis for short span Reinforced Concrete (RC) bridge with circular piers cross section is modeling to present effects of soil structural interaction (SSI). Structural elements models are including linear foundation springs modeling, and nonlinear RC piers modeling. The paper succeeded to present the SSI effects of nonlinear pushover analysis of short spans RC bridges to determine the significant effects on dynamic characteristics and displacement capacity of short span RC bridges performance;that is increasing within range 11% to 20% compared to baseline pushover analysis of bridge without SSI effects. Results show the bridge stiffness decreases due to SSI effects on the bridge support for more flexible soils types that generates large displacement, with corresponding less base shear in bridge piers and footings by average percentage 12% and 18%, which is important for structural evaluation for new bridge construction and also, for strengthening and repair works evaluation of existing bridges.
基金Supported by:National Natural Science Foundation of China Under Grant No.50878033 and National Special Foundation of Earthquake Science of China Under Grant No.200808021
文摘In recent earthquakes, a large number of reinforced concrete （RC） bridges were severely damaged due to mixed flexure-shear failure modes of the bridge piers. An integrated experimental and finite element （FE） analysis study is described in this paper to study the seismic performance of the bridge piers that failed in flexure-shear modes. In the first part, a nonlinear cyclic loading test on six RC bridge piers with circular cross sections is carried out experimentally. The damage states, ductility and energy dissipation parameters, stiffness degradation and shear strength of the piers are studied and compared with each other. The experimental results suggest that all the piers exhibit stable flexural response at displacement ductilities up to four before exhibiting brittle shear failure. The ultimate performance of the piers is dominated by shear capacity due to significant shear cracking, and in some cases, rupturing of spiral bars. In the second part, modeling approaches describing the hysteretic behavior of the piers are investigated by using ANSYS software. A set of models with different parameters is selected and evaluated through comparison with experimental results. The influences of the shear retention coefficients between concrete cracks, the Bauschinger effect in longitudinal reinforcement, the bond-slip relationship between the longitudinal reinforcement and the concrete and the concrete failure surface on the simulated hysteretic curves are discussed. Then, a modified analysis model is presented and its accuracy is verified by comparing the simulated results with experimental ones. This research uses models available in commercial FE codes and is intended for researchers and engineers interested in using ANSYS software to predict the hysteretic behavior of reinforced concrete structures.
文摘This paper attempts to explore potential benefits of form in a deck-type reinforced concrete（RC） arch bridge in connection with its overall seismic behavior and performance. Through a detailed three-dimensional finite element modeling and analysis of an actual existing deck-type RC arch bridge, some useful quantitative information have been derived that may serve for a better understanding of the seismic behavior of such arch bridges. A series of the nonlinear dynamic analyses has been carried out under the action of seven different time histories of ground motion scaled to the AASHTO 2012 response spectrum. The concept of demand to capacity ratios has been employed to provide an initial estimation of the seismic performance of the bridge members. As a consequence of the structural form, a particular type of irregularity is introduced due to variable heights of columns transferring the deck loads to the main arch. Hence, a particular attention has been paid to the internal force/moment distributions within the short, medium, and long columns as well as along the main arch. A study of the effects of the vertical component of ground motion has demonstrated the need for the inclusion of these effects in the analysis of such bridges.
文摘NLTHA （nonlinear time history analysis） is impractical for widespread used by the professional engineer because it requires long and inefficient computational time involving complexities when six DOF （degree of freedom） per node is applied. The NLTHA nowadays is predicted by MPA （modal pushover analysis）. In this method, effects of higher modes on the dynamic response are considered to estimate seismic demands for structures. In this study, the effect of the reduction of number of DOF is analyzed using 3D NLTHA together with MPA of a rigid connection RC bridge under large earthquake motion. The results are compared with the 6 DOF NLTHA in terms of response of the structure and CPU time to obtain the most efficient computational effort. Result of NLTHA showed that the computational time of the structure both for 4 DOF （without two lateral torsional effects） and 3 DOF （without two lateral torsional and vertical displacements） was reduced significantly compared to the structure using 6 DOF. The reduction of computational time was close to fifty percent both for 4 and 3 DOF＇s. When the maximum responses between NLTHA and MPA are compared, it is found that the differences are insignificant.
文摘This paper is dedicated to the study of the seismic performance of an existing RC （reinforced concrete） bridge localized in a region of moderate seismicity. The bridge has six spans and piers with very different heights, three of which are monolithically connected to the deck. To understand the roles of the different pier sizes in the overall behavior, several analyses were carried out in the longitudinal direction： （1） linear dynamic approach; （2） non-linear static approach; （3） non-linear dynamic approach. Linear dynamic analysis was made in order to design the bridge for the ultimate limit state considering the largest value of the ductility factor. No safety verification was made for the other loads. Using non-linear static analyses, sensitivity was performed to check the influence of reinforcement quantities of each pier on the overall behavior of the bridge under Lisbon seismic action. For the non-linear dynamic approach, a series of strong motion records compatible with the EC-8 spectrum for Lisbon area were generated. The very same combinations of reinforcement quantities were studied. Comparisons between static and dynamic non-linear analysis were made to confirm the validity of the first one in the case under analysis, where the period of vibration is quite high.
