Pushover analysis of reinforced concrete frames considering shear failure at beam-column joints

Since most current seismic capacity evaluations of reinforced concrete （RC） frame structures are implemented by either static pushover analysis （PA） or dynamic time history analysis, with diverse settings of the plastic hinges （PHs） on such main structural components as columns, beams and walls, the complex behavior of shear failure at beam-column joints （BCJs） during major earthquakes is commonly neglected. This study proposes new nonlinear PA procedures that consider shear failure at BCJs and seek to assess the actual damage to RC structures. Based on the specifications of FEMA-356, a simplified joint model composed of two nonlinear cross struts placed diagonally over the location of the plastic hinge is established, allowing a sophisticated PA to be performed. To verify the validity of this method, the analytical results for the capacity curves and the failure mechanism derived from three different full-size RC frames are compared with the experimental measurements. By considering shear failure at BCJs, the proposed nonlinear analytical procedures can be used to estimate the structural behavior of RC frames, including seismic capacity and the progressive failure sequence of joints, in a precise and effective manner.

Effectiveness of two conventional methods for seismic retrofit of steel and RC moment resisting frames based on damage control criteria

This study investigates the efficiency of two types of rehabilitation methods based on economic justification that can lead to logical decision making between the retrofitting schemes. Among various rehabilitation methods, concentric chevron bracing（CCB） and cylindrical friction damper（CFD） were selected. The performance assessment procedure of the frames is divided into two distinct phases. First, the limit state probabilities of the structures before and after rehabilitation are investigated. In the second phase, the seismic risk of structures in terms of life safety and financial losses（decision variables） using the recently published FEMA P58 methodology is evaluated. The results show that the proposed retrofitting methods improve the serviceability and life safety performance levels of steel and RC structures at different rates when subjected to earthquake loads. Moreover, these procedures reveal that financial losses are greatly decreased, and were more tangible by the application of CFD rather than using CCB. Although using both retrofitting methods reduced damage state probabilities, incorporation of a site-specific seismic hazard curve to evaluate mean annual occurrence frequency at the collapse prevention limit state caused unexpected results to be obtained. Contrary to CFD, the collapse probability of the structures retrofitted with CCB increased when compared with the primary structures.

Rapid report of seismic damage to hospitals in the 2023 Turkey earthquake sequences

The seismic performance of medical systems is crucial for the seismic resilience of communities.The report summarizes the observed damage to twelve hospital buildings in the area affected by the MW 7.8 and MW 7.5 earthquakes on February 6,2023 in Turkey.They include five base-isolated buildings and seven fixed-base buildings in southcentral Turkey's seven most heavily affected provinces.By relating the post-quake occupancy statuses of the hospitals with the estimated seismic demands during the earthquake doublet,the report offers the following observations:(1)the base-isolated hospital buildings on friction pendulum bearings generally exhibited superior performance of achieving the goal of immediate occupancy and provided better protection for nonstructural elements than fixed-base counterparts did;(2)the fixed-base hospital buildings of reinforced concrete structures constructed after 2001 successfully achieved the goal of collapse prevention even under very high seismic demands;(3)some fixed-base hospitals also remained operational even if they were very close to the fault rupture and were subjected to higher-than-design-level earthquake ground motions.

Evaluation of collapse resistance of RC frame structures for Chinese schools in seismic design categories B and C

According to the Code for Seismic Design of Buildings （GB50011-2001）, ten typical reinforced concrete （RC） frame structures, used as school classroom buildings, are designed with different seismic fortification intensities （SFIs） （SFI=6 to 8.5） and different seismic design categories （SDCs） （SDC=B and C）. The collapse resistance of the frames with SDC=B and C in terms of collapse fragility curves are quantitatively evaluated and compared via incremental dynamic analysis （IDA）. The results show that the collapse resistance of structures should be evaluated based on both the absolute seismic resistance and the corresponding design seismic intensity. For the frames with SFI from 6 to 7.5, because they have relatively low absolute seismic resistance, their collapse resistance is insufficient even when their corresponding SDCs are upgraded from B to C. Thus, further measures are needed to enhance these structures, and some suggestions are proposed.

Shake-table testing of a self-centering precast reinforced concrete frame with shear walls

The seismic performance of a self-centering precast reinforced concrete （RC） frame with shear walls was investigated in this paper. The lateral force resistance was provided by self-centering precast RC shear walls （SPCW）, which utilize a combination ofunbonded prestressed post-tensioned （PT） tendons and mild steel reinforcing bars for flexural resistance across base joints. The structures concentrated deformations at the bottom joints and the unbonded PT tendons provided the self-centering restoring force. A 1/3-scale model of a five-story self-centering RC frame with shear walls was designed and tested on a shake-table under a series of bi-directional earthquake excitations with increasing intensity. The acceleration response, roof displacement, inter-story drifts, residual drifts, shear force ratios, hysteresis curves, and local behaviour of the test specimen were analysed and evaluated. The results demonstrated that seismic performance of the test specimen was satisfactory in the plane of the shear wall; however, the structure sustained inter-story drift levels up to 2.45%. Negligible residual drifts were recorded after all applied earthquake excitations. Based on the shake-table test results, it is feasible to apply and popularize a self-centering precast RC frame with shear walls as a structural system in seismic regions.

Design objectives and collapse prevention for building structures in mega-earthquake

A "mega-earthquake" is one with an intensity larger than the most severe earthquake intensity category currently considered in design codes. For a "mega-earthquake," the design objective of a given structure is to "preserve living spaces for people in the buildings." In this paper,factors that may influence the collapse resistance of RC frames in a mega-earthquake are analyzed based on seismic damage observed in the 2008 Wenchuan earthquake. Methodologies to improve structural collapse resistance focus on three aspects:global strength margin,global redundancy and global integration of the structural system. Fundamental principles and design concepts for collapse prevention under a mega-earthquake are proposed,and issues that need further research are identified.

Resilience-based retrofitting of existing urban RC-frame buildings using seismic isolation

The improvement of the seismic resilience of existing reinforced-concrete(RC) frame buildings, which is essential for the seismic resilience of a city, has become a critical issue. Although seismic isolation is an effective method for improving the resilient performance of such buildings, target-oriented quantitative improvements of the resilient performance of these buildings have been reported rarely. To address this gap, the seismic resilience of two existing RC frame buildings located in a high seismic intensity region of China were assessed based on the Chinese Standard for Seismic Resilience Assessment of Buildings. The critical engineering demand parameters(EDPs) affecting the seismic resilience of such buildings were identified. Subsequently, the seismic resilience of buildings retrofitted with different isolation schemes(i.e., yield ratios) were evaluated and compared, with emphasis on the relationships among yield ratios, EDPs, and levels of seismic resilience. Accordingly, to achieve the highest level of seismic resilience with respect to the Chinese standard, a yield ratio of 3% was recommended and successfully applied to the target-oriented design for the seismic-resilience improvement of an existing RC frame building. The research outcome can provide an important reference for the resilience-based retrofitting of existing RC frame buildings using seismic isolation in urban cities.

Seismic damage to structures in the Ms6.5 Ludian earthquake

On 3 August 2014, the Ludian earthquake struck northwest Yunnan Province with a surface wave magnitude of 6.5. This moderate earthquake unexpectedly caused high fatalities and great economic loss. Four strong motion stations were located in the areas with intensity V, VI, VII and IX, near the epicentre. The characteristics of the ground motion are discussed herein, including 1） ground motion was strong at a period of less than 1.4 s, which covered the natural vibration period of a large number of structures; and 2） the release energy was concentrated geographically. Based on materials collected during emergency building inspections, the damage patterns of adobe, masonry, timber frame and reinforced concrete （RC） frame structures in areas with different intensities are summarised. Earthquake damage matrices of local buildings are also given for fragility evaluation and earthquake damage prediction. It is found that the collapse ratios of RC frame and confined masonry structures based on the new design code are significantly lower than non-seismic buildings. However, the RC frame structures still failed to achieve the ＇strong column, weak beam＇ design target. Traditional timber frame structures with a light infill wall showed good aseismic performance.

Seismic performance evaluation of a self-centering precast reinforced concrete frame structure

The seismic performance of a five-story,four-bay,self-centering precast reinforced concrete frame(SC-RCF),which was redesigned using the direct displacement-based design method,was analytically investigated.The analytical model of the overall structure was developed in OpenSees.The multi-spring contact element was adopted to simulate gap open-close behavior at connection interfaces.The limit states of external mild steel dampers and unbonded post-tensioning strands were considered.Static pushover analyses were performed up to the roof drift of 10%.The nonlinear dynamic responses under four groups of ground motions(with different fault distances and site conditions)at six hazard levels(from the service to the very rare earthquake(VRE))were compared.Incremental dynamic analyses were implemented to quantify the structural collapse risk.The results showed that the structural responses of SC-RCF were satisfactory under all levels of earthquakes.The collapse safety of the structure under earthquakes up to VRE1 was adequate,while the structure would collapse to a large extent under VRE2 and VRE3.

Seismic resilience assessment of corroded reinforced concrete structures designed to the Chinese codes

The natural landscape in China exposes many existing RC buildings to aggressive environments.Such exposure can lead to deterioration in structural performance with regard to resisting events such as earthquakes.Corrosion of embedded reinforcement is one of the most common mechanisms by which such structural degradation occurs.There has been increasing attention in recent years toward seismic resilience in communities and their constituent construction;however,to date,studies have neglected the effect of natural aging.This study aims to examine the effect of reinforcement corrosion on the seismic resilience of RC frames that are designed according to Chinese seismic design codes.A total of twenty RC frames are used to represent design and construction that is typical of coastal China,with consideration given to various seismic fortification levels and elevation arrangements.Seismic fragility relationships are developed for case frames under varying levels of reinforcement corrosion,i.e.,corrosion rates are increased from 5%to 15%.Subsequently,the seismic resilience levels of uncorroded and corroded RC frames are compared using a normalized loss factor.It was found that the loss of resilience of the corroded frames is greater than that of their uncorroded counterparts.At the Rare Earthquake hazard level,the corrosioninduced increase in loss of resilience can be more than 200%,showing the significant effect of reinforcement corrosion on structural resilience under the influence of earthquakes.

Seismic health monitoring of RC frame structures using smart aggregates

Structural health monitoring of RC structures under seismic loads has recently attracted much attention in the earthquake engineering research community. In this study, a piezoceramic-based device called ＂smart aggregate＂ was used for the health monitoring of RC frame structures under earthquake excitations. Three RC moment frames instrumented with smart aggregates were tested using a shaketable with different ground excitation intensities. Distributed piezoceramic- based smart aggregates were embedded in the RC structures and used to monitor their health condition during the tests. The sensitivity and effectiveness of the proposed piezoceramic-based approach were investigated and evaluated by analyzing the measured responses. The displacement ductility demand of the structural members was calculated and compared with the damage index determined from the health monitoring system. The comparison shows that the damage index is compatible with the calculated ductility demand.

Effect of URM infills on seismic vulnerability of Indian code designed RC frame buildings

Unreinforced Masonry (URM) is the most common partitioning material in framed buildings in India and many other countries. Although it is well-known that under lateral loading the behavior and modes of failure of the frame buildings change significantly due to infill-frame interaction, the general design practice is to treat infills as nonstructural elements and their stiffness, strength and interaction with the frame is often ignored, primarily because of difficulties in simulation and lack of modeling guidelines in design codes. The Indian Standard, like many other national codes, does not provide explicit insight into the anticipated performance and associated vulnerability of infilled frames. This paper presents an analytical study on the seismic performance and fragility analysis of Indian code-designed RC frame buildings with and without URM infills. Infills are modeled as diagonal struts as per ASCE 41 guidelines and various modes of failure are considered. HAZUS methodology along with nonlinear static analysis is used to compare the seismic vulnerability of bare and infilled frames. The comparative study suggests that URM infills result in a significant increase in the seismic vulnerability of RC frames and their effect needs to be properly incorporated in design codes.

Estimation of Aleatory Randomness by S_(a)(T_(1))-Based Intensity Measures in Fragility Analysis of Reinforced Concrete Frame Structures

Based on the multiple stripes analysis method,an investigation of the estimation of aleatory randomness by S_(a)(T_(1))-based intensity measures(IMs)in the fragility analysis is carried out for two typical low-and mediumrise reinforced concrete(RC)frame structures with 4 and 8 stories,respectively.The sensitivity of the aleatory randomness estimated in fragility curves to various S_(a)(T_(1))-based IMs is analyzed at three damage limit states,i.e.,immediate occupancy,life safety,and collapse prevention.In addition,the effect of characterization methods of bidirectional ground motion intensity on the record-to-record variability is investigated.It is found that the damage limit state of the structure has an important influence on the applicability of the ground motion IM.The S_(a)(T_(1))-based IMs,considering the effect of softened period,can maintain lower record-to-record variability in the three limit states,and the S_(a)(T_(1))-based IMs,considering the effect of higher modes,do not show their advantage over S_(a)(T_(1)).Furthermore,the optimal multiplier C and exponentαin the dual-parameter ground motion IM are proposed to obtain a lower record-to-record variability in the fragility analysis of different damage limit state.Finally,the improved dual-parameter ground motion IM is applied in the risk assessment of the 8-story frame structure.

Study on the effect of the infill walls on the seismic performance of a reinforced concrete frame

Motivated by the seismic damage observed to reinforced concrete （RC） frame structures during the Wenchuan earthquake, the effect of infill walls on the seismic performance of a RC frame is studied in this paper. Infill walls, especially those made of masonry, offer some amount of stiffness and strength. Therefore, the effect of infill walls should be considered during the design of RC frames. In this study, an analysis of the recorded ground motion in the Wenehuan earthquake is performed. Then, a numerical model is developed to simulate the infill walls. Finally, nonlinear dynamic analysis is carried out on a RC frame with and without infill walls, respectively, by using CANNY software. Through a comparative analysis, the following conclusions can be drawn. The failure mode of the frame with infill walls is in accordance with the seismic damage failure pattern, which is strong beam and weak column mode. This indicates that the infill walls change the failure pattern of the frame, and it is necessary to consider them in the seismic design of the RC frame. The numerical model presented in this paper can effectively simulate the effect of infill walls on the RC frame.

Three dimensional temporal characteristics of ground motions and building responses in Wenchuan earthquake

In this paper, analytical results from 3D temporal characteristics of the responses of an RC frame building subjected to both a large aflershock and the main shock of Wenchuan M8.0 earthquake are presented. The ground motion records from the main shock were obtained from three nearby stations. The acceleration records were analyzed in terms of instantaneous tangential acceleration αv normal acceleration αN, Euclidean norm of acceleration vector lal, velocity vector ｜v｜, displacement vector ｜d｜, temporal curvature κ,κt, and temporal torsion γ and γt.Results of the kinematic relationship between the above factors and some additional in depth information obtained from extensive analyses are provided and discussed.

Cumulative damage effects of mainshock-aftershock sequences on RC-frame structures

Frequent aftershocks often follow a strong mainshock.They can significantly increase cumulative damage to a structure.A model of a five-story reinforced concrete frame structure was designed and a nonlinear mathematical model of the structure was developed to investigate the damage states resulting from different mainshock-aftershock sequences.Mainshock-aftershock sequences consisting of one of three recorded mainshocks combined with one of five recorded aftershocks were created for input to the mathematical model.Inelastic energy dissipation and the Park-Ang damage index were used as measures of cumulative damage to the structure.The results demonstrate that consideration of only the single mainshock ground motion in seismic building design can result in the design and construction of unsafe buildings.Total cumulative damage to a structure is caused by the combination of damage states resulting from the mainshock and the aftershock(s).

Slotted Hole Effect on Damage Mechanism of Gymnasium Building with RC Frame and Steel Roof

On the 2011 off the Pacific Coast of Tohoku Earthquake, gymnasium buildings exhibited the unexpected structural damages, which prevented a use as evacuation shelters in during- and post-disaster periods. The major failure occurring on the connection between the RC column top and steel roof as well as the cracks in the RC column base was observed during the emergent inspection. According to the earlier studies, it was implied that the presence of the slotted hole possibly deteriorates the seismic capacity;however, the length of slotted hole was fixed at a certain value. Facing this concern, this research attempts to clarify the influence of the slotted hole length through a comprehensive parametric study by pushover and seismic response analyses. In conclusion, it has been discovered that the slotted hole deteriorates the seismic capacity for the connection failure up to almost 50% of that without slotted hole. Moreover, the discrepancy of characteristics obtained by the static and dynamic analyses is originated by means of the presence of slotted hole. This slotted hole effect should be noted by structural engineers and researchers to provide the adequate seismic diagnosis and strengthening.

Seismic assessment of RC frames infilled with innovative CFS walls considering seismic orientation effect

The metal tailings porous concrete cold-formed steel(MCFS)wall is an innovative cold-formed steel(CFS)wall with good thermal and mechanical properties,which has the potential to be widely utilized as the infilled wall(IW).In this paper,the MCFS walls are adopted in the reinforced concrete(RC)frame,and the seismic performance of the building subjected to ground motions with various incidence angles are investigated.Three-dimensional finite element model of the studied building is developed with full consideration of the in-plain(IP)and out-of-plane(OP)behavior of MCFS walls.Incremental dynamic analysis is conducted to obtain the deformation responses of frames and damage ratios of MCFS walls under the combined effect of seismic intensity and orientation.Fragility curves are generated to assess the seismic performance of the building and investigate the effect of ground motion orientation.The results validate the superior performance of infilled MCFS walls,and reveal that the seismic orientation has a considerable impact on the response along each reference axis of the structure.Furthermore,different incidence angles induce up to 10.2%and 14.4%variations in the median Sa(T1)of fragilities for the frames in X and Y axes,and the corresponding change rates in the median Sa(T1)for the walls are 13.5%and 15.1%,respectively.However,for the overall performance of the building,the seismic orientation effect is less significant.The rates of changes in median Sa(T1)are less than 4%for both frames and MCFS walls.

Effect of RC wall on the development of plastic rotation in the beams of RC frame structures

The objective of this study is, to interpret the influence of reinforced concrete walls addition in reinforced concrete frame structures considering behavior laws that reflects the actual behavior of such structures, by means of Castem2000computer code （pushover analysis）. A finite element model is proposed in this study, using the TAKEDA modified behavior model with Timoshenko beams elements. This model is validated initially on experimental model. Then the work has focused on the behavior of a RC frame with 3 levels and three bays to better visualize the behavior of plastic hinges. Once the plastic hinge control parameters are identified （plastic rotation, ultimate curvature）, a strengthening by introduction of reinforced concrete walls （RC/wall） at the ends of the reinforced concrete frame （RC/ frame） has been performed. The results show that these RC walls significantly improve the behavior, by a relocation of efforts towards the central part of the beams.