Beam dynamics and RF design have been performed of a new type trapezoidal IH-RFQ operating at 104 MHz for acceleration of 14C+ in the framework of RFQ based 14C AMS facility at Peking University. Low energy spread RFQ...Beam dynamics and RF design have been performed of a new type trapezoidal IH-RFQ operating at 104 MHz for acceleration of 14C+ in the framework of RFQ based 14C AMS facility at Peking University. Low energy spread RFQ beam dynamics design was approached by the method of internal discrete bunching. 14C+ will be accelerated from 40 keV to 500 keV with the length of about 1.1 m. The designed transmission efficiency is better than 95% and the energy spread is as low as 0.6%. Combining the beam dynamics design, a trapezoidal IH-RFQ structure was proposed, which can be cooled more easily and has better mechanical performance than traditional RFQ. Electromagnetic field distribution was simulated by using CST Microwave Studio (MWS). The specific shunt impedance and the quality factor were optimized primarily.展开更多
The filter and antenna are two key components of the radio frequency(RF)front-end.When the antenna is directly connected with the filter,additional mismatch losses will be caused.Therefore,the antenna and filter are i...The filter and antenna are two key components of the radio frequency(RF)front-end.When the antenna is directly connected with the filter,additional mismatch losses will be caused.Therefore,the antenna and filter are integrated into a single device to provide both filtering and radiating functions.In this way,many advantages,like low cost,light weight,small size and lower insertion loss can be obtained.In this paper,the co-design approaches of RF filter-antenna are reviewed.Based on the open literatures,the integrated approaches of filtering antenna can be classified into five main categories:1)Co-design by optimizing the interfacing impedance,2)co-design according to the synthesis approach of filter,3)co-design by embedding novel resonators within the feeding structures,4)co-design by employing auxiliary physical structures,and 5)other methods.The RF filter-antenna system can improve the integration degree of RF frontend,reduce its size and cost,and optimize its performance.展开更多
The main research objective in wireless sensor networks (WSN) domain is to develop algorithms and protocols to ensure minimal energy consumption with maximum network lifetime. In this paper, we propose a novel design ...The main research objective in wireless sensor networks (WSN) domain is to develop algorithms and protocols to ensure minimal energy consumption with maximum network lifetime. In this paper, we propose a novel design for energy harvesting sensor node and cross-layered MAC protocol using three adjacent layers (Physical, MAC and Network) to economize energy for WSN. The basic idea behind our protocol is to re-energize the neighboring nodes using the radio frequency (RF) energy transmitted by the active nodes. This can be achieved by designing new energy harvesting sensor node and redesigning the MAC protocol. The results show that the proposed cross layer CL_EHSN improves the life time of the WSN by 40%.展开更多
提高射频功率器件的鲁棒性有利于增强器件的抗静电放电能力和抗失配能力.为了直观地了解器件内部发生的电学过程,本文研究了高鲁棒性N型沟道RF-LDMOS (Radio Frequency Lateral Diffusion MOS)在TLP (Transmission Line Pulse)应力下的...提高射频功率器件的鲁棒性有利于增强器件的抗静电放电能力和抗失配能力.为了直观地了解器件内部发生的电学过程,本文研究了高鲁棒性N型沟道RF-LDMOS (Radio Frequency Lateral Diffusion MOS)在TLP (Transmission Line Pulse)应力下的电学机理.利用0.18μm BCD (Bipolar/CMOS/DMOS)先进制程,实现了特定尺寸器件的设计与流片.通过实测与仿真的对比,发现静电放电失效的随机性、芯片内部的热效应是导致仿真和实测差异的非理想因素.通过对TLP仿真的各阶段重要节点的分析,证明了源极下方的P型埋层有利于提高空穴电流的泄放能力,从而提高RF-LDMOS的鲁棒性.展开更多
文摘Beam dynamics and RF design have been performed of a new type trapezoidal IH-RFQ operating at 104 MHz for acceleration of 14C+ in the framework of RFQ based 14C AMS facility at Peking University. Low energy spread RFQ beam dynamics design was approached by the method of internal discrete bunching. 14C+ will be accelerated from 40 keV to 500 keV with the length of about 1.1 m. The designed transmission efficiency is better than 95% and the energy spread is as low as 0.6%. Combining the beam dynamics design, a trapezoidal IH-RFQ structure was proposed, which can be cooled more easily and has better mechanical performance than traditional RFQ. Electromagnetic field distribution was simulated by using CST Microwave Studio (MWS). The specific shunt impedance and the quality factor were optimized primarily.
基金supported by the National Science Foundation of China under Grant No.61771295the Natural Science Young Foundation of Shanxi Province under Grant Nos.2014021021-1 and 2015011042
文摘The filter and antenna are two key components of the radio frequency(RF)front-end.When the antenna is directly connected with the filter,additional mismatch losses will be caused.Therefore,the antenna and filter are integrated into a single device to provide both filtering and radiating functions.In this way,many advantages,like low cost,light weight,small size and lower insertion loss can be obtained.In this paper,the co-design approaches of RF filter-antenna are reviewed.Based on the open literatures,the integrated approaches of filtering antenna can be classified into five main categories:1)Co-design by optimizing the interfacing impedance,2)co-design according to the synthesis approach of filter,3)co-design by embedding novel resonators within the feeding structures,4)co-design by employing auxiliary physical structures,and 5)other methods.The RF filter-antenna system can improve the integration degree of RF frontend,reduce its size and cost,and optimize its performance.
文摘The main research objective in wireless sensor networks (WSN) domain is to develop algorithms and protocols to ensure minimal energy consumption with maximum network lifetime. In this paper, we propose a novel design for energy harvesting sensor node and cross-layered MAC protocol using three adjacent layers (Physical, MAC and Network) to economize energy for WSN. The basic idea behind our protocol is to re-energize the neighboring nodes using the radio frequency (RF) energy transmitted by the active nodes. This can be achieved by designing new energy harvesting sensor node and redesigning the MAC protocol. The results show that the proposed cross layer CL_EHSN improves the life time of the WSN by 40%.
