The behavior of a RF-excited waveguide CO2 laser in the pulse regime is studied theoretically. The output pulse evolution is studied by applying three types of pulses namely the square, sine and the triangular ones as...The behavior of a RF-excited waveguide CO2 laser in the pulse regime is studied theoretically. The output pulse evolution is studied by applying three types of pulses namely the square, sine and the triangular ones as the excitation pulses. The frequency dependence behavior of the output pulse is also presented.展开更多
Theoretical analysis model has been established for CO 2 laser to describe the process of dynamic emission in the electrooptically Q switched laser .The electron excitation and the energy transfer of vibration level a...Theoretical analysis model has been established for CO 2 laser to describe the process of dynamic emission in the electrooptically Q switched laser .The electron excitation and the energy transfer of vibration level and the rotational relaxation of rotational levels are described. The comparison between this model and a set of coupled rat equations model are discussed.展开更多
The experimental study of the laser beam parameters of the pulse repetitive RF-excited diffusion cooled waveguide CO2 laser are presented.The measurements are carried out for the pumping pulse duration of 100 μs and ...The experimental study of the laser beam parameters of the pulse repetitive RF-excited diffusion cooled waveguide CO2 laser are presented.The measurements are carried out for the pumping pulse duration of 100 μs and pulse repetitive rates 5-14 kHz.The average power density delivered to the active medium is 76 W/cm3.Three types of the pulses,namely the square,the sine and the triangular ones have been applied at the input as pumping pulses and their effects on the output power and the delay time have been studied.The output power of the radiation versus input power,pressure of the laser gas mixture and modulation frequency has been investigated.The results indicate that the output peak power for the three types of pulses increases with increase of the pressure of the laser gas mixture and with the input power where as it decreases with the repetition frequency.The delay time of the output pulse decreases with the increase of the repetition frequency and input power,where as it increases with the increase of the pressure of the laser gas mixture.The behavior of the output power and the delay time with duty cycle for square pulse has also been investigated.展开更多
Presents a waveguide CO 2 laser with two unequal long channels excited by radio frequency (RF) which has more than 30 laser lines from a long channel of 400 mm with grating, and 3 laser lines from a short channel of 2...Presents a waveguide CO 2 laser with two unequal long channels excited by radio frequency (RF) which has more than 30 laser lines from a long channel of 400 mm with grating, and 3 laser lines from a short channel of 200 mm by PZT.展开更多
In this paper a new kind of mid - infrared fiber material is reported. The reflective coefficients (R) of glasses in the system Na2O - ZnO - GeO2-SiO2-PbO have been measured-the refractive index becomes less than unit...In this paper a new kind of mid - infrared fiber material is reported. The reflective coefficients (R) of glasses in the system Na2O - ZnO - GeO2-SiO2-PbO have been measured-the refractive index becomes less than unity at 1180 - 900cm-1 range because of the existence of anomalous dispersion. The optical losses of hollow waveguides were calculated,the predicted losses at 940cm-1are 0. 65 and 0. 081B/ m as the inner diameter of fiber is 0. 5 and 1. 0mm respectively. The glasses can be used as the cladding materials of hol-low waveguides for transmitting CO2 laser from the measurements of characteristic temperatures, coefficient of expansion and chemical durability.展开更多
An accurate method of determining gain coefficients of pulse RF-discharge CO2 laser is developed, which involves the use of both the regular 00o1 and 00o2 laser transitions as probes of CO2 laser. The results indicate...An accurate method of determining gain coefficients of pulse RF-discharge CO2 laser is developed, which involves the use of both the regular 00o1 and 00o2 laser transitions as probes of CO2 laser. The results indicate that the majority of transitions in discharge have anomalous gain coefficients under RF-discharge condition. This fact has not been generally recognized and the neglect of overlapping transitions can lead to errors in determining rotational temperature.展开更多
Time-integrated optical emission analysis of laser-induced plasma on Teflon is presented.Plasma was induced under atmospheric pressure air using transversely excited atmospheric CO_(2) laser pulses.Teflon is a C-based...Time-integrated optical emission analysis of laser-induced plasma on Teflon is presented.Plasma was induced under atmospheric pressure air using transversely excited atmospheric CO_(2) laser pulses.Teflon is a C-based polymer that is,among other things,interesting as a substrate for laser-induced breakdown spectroscopy analysis of liquid samples.This study aimed to determine the optimal experimental conditions for obtaining neutral and ionized C spectral lines and C2 and CN molecular band emission suitable for spectrochemical purposes.Evaluation of plasma parameters was done using several spectroscopic techniques.Stark profiles of appropriate C ionic lines were used to determine electron number density.The ratio of the integral intensity of ionic-to-atomic C spectral lines was used to determine the ionization temperature.A spectral emission of C2 Swan and CN violet bands system was used to determine the temperature of the colder,peripheral parts of plasma.We critically analyzed the use of molecular emission bands as a tool for plasma diagnostics and suggested methods for possible improvements.展开更多
The design and performance of radio frequency (RF) excited partial Z-fold waveguide CO_2 laser with two channels are exposed. The length of the partial Z-fold channel is 3×460 mm and that of the single channel is...The design and performance of radio frequency (RF) excited partial Z-fold waveguide CO_2 laser with two channels are exposed. The length of the partial Z-fold channel is 3×460 mm and that of the single channel is 460 mm. The electrodes for the two channels are common and excited by a same RF source. According to our analysis, this kind of structure can greatly improve the laser offset frequency stability. In the experiments, we studied the variation of laser output power with gas pressure for two different channels. The maximum laser output power is about 23 W for the partial Z-fold channel and about 6 W for the single channel.展开更多
文摘The behavior of a RF-excited waveguide CO2 laser in the pulse regime is studied theoretically. The output pulse evolution is studied by applying three types of pulses namely the square, sine and the triangular ones as the excitation pulses. The frequency dependence behavior of the output pulse is also presented.
文摘Theoretical analysis model has been established for CO 2 laser to describe the process of dynamic emission in the electrooptically Q switched laser .The electron excitation and the energy transfer of vibration level and the rotational relaxation of rotational levels are described. The comparison between this model and a set of coupled rat equations model are discussed.
基金Sponsored by National Science Foundation of China(60378010)
文摘The experimental study of the laser beam parameters of the pulse repetitive RF-excited diffusion cooled waveguide CO2 laser are presented.The measurements are carried out for the pumping pulse duration of 100 μs and pulse repetitive rates 5-14 kHz.The average power density delivered to the active medium is 76 W/cm3.Three types of the pulses,namely the square,the sine and the triangular ones have been applied at the input as pumping pulses and their effects on the output power and the delay time have been studied.The output power of the radiation versus input power,pressure of the laser gas mixture and modulation frequency has been investigated.The results indicate that the output peak power for the three types of pulses increases with increase of the pressure of the laser gas mixture and with the input power where as it decreases with the repetition frequency.The delay time of the output pulse decreases with the increase of the repetition frequency and input power,where as it increases with the increase of the pressure of the laser gas mixture.The behavior of the output power and the delay time with duty cycle for square pulse has also been investigated.
文摘Presents a waveguide CO 2 laser with two unequal long channels excited by radio frequency (RF) which has more than 30 laser lines from a long channel of 400 mm with grating, and 3 laser lines from a short channel of 200 mm by PZT.
文摘In this paper a new kind of mid - infrared fiber material is reported. The reflective coefficients (R) of glasses in the system Na2O - ZnO - GeO2-SiO2-PbO have been measured-the refractive index becomes less than unity at 1180 - 900cm-1 range because of the existence of anomalous dispersion. The optical losses of hollow waveguides were calculated,the predicted losses at 940cm-1are 0. 65 and 0. 081B/ m as the inner diameter of fiber is 0. 5 and 1. 0mm respectively. The glasses can be used as the cladding materials of hol-low waveguides for transmitting CO2 laser from the measurements of characteristic temperatures, coefficient of expansion and chemical durability.
文摘An accurate method of determining gain coefficients of pulse RF-discharge CO2 laser is developed, which involves the use of both the regular 00o1 and 00o2 laser transitions as probes of CO2 laser. The results indicate that the majority of transitions in discharge have anomalous gain coefficients under RF-discharge condition. This fact has not been generally recognized and the neglect of overlapping transitions can lead to errors in determining rotational temperature.
基金funded by the Ministry of Education,Science and Technological Development of the Republic of Serbia(Nos.451-03-68/2022-14/200017 and 451-03-68/2022-14/200146)the financial support of the State Committee on Science and Technology of the Republic of Belarusthe Belarusian Republican Foundation for Fundamental Research(No.F20SRBG-001)。
文摘Time-integrated optical emission analysis of laser-induced plasma on Teflon is presented.Plasma was induced under atmospheric pressure air using transversely excited atmospheric CO_(2) laser pulses.Teflon is a C-based polymer that is,among other things,interesting as a substrate for laser-induced breakdown spectroscopy analysis of liquid samples.This study aimed to determine the optimal experimental conditions for obtaining neutral and ionized C spectral lines and C2 and CN molecular band emission suitable for spectrochemical purposes.Evaluation of plasma parameters was done using several spectroscopic techniques.Stark profiles of appropriate C ionic lines were used to determine electron number density.The ratio of the integral intensity of ionic-to-atomic C spectral lines was used to determine the ionization temperature.A spectral emission of C2 Swan and CN violet bands system was used to determine the temperature of the colder,peripheral parts of plasma.We critically analyzed the use of molecular emission bands as a tool for plasma diagnostics and suggested methods for possible improvements.
文摘The design and performance of radio frequency (RF) excited partial Z-fold waveguide CO_2 laser with two channels are exposed. The length of the partial Z-fold channel is 3×460 mm and that of the single channel is 460 mm. The electrodes for the two channels are common and excited by a same RF source. According to our analysis, this kind of structure can greatly improve the laser offset frequency stability. In the experiments, we studied the variation of laser output power with gas pressure for two different channels. The maximum laser output power is about 23 W for the partial Z-fold channel and about 6 W for the single channel.
