An MWCNT-doped （multi-walled carbon nanotube） Sn02 thin film NO2 gas sensor, prepared by radio frequency reactive magnetron sputtering, showed a high sensitivity to ultra-low concentrations of NO2 in the parts per b...An MWCNT-doped （multi-walled carbon nanotube） Sn02 thin film NO2 gas sensor, prepared by radio frequency reactive magnetron sputtering, showed a high sensitivity to ultra-low concentrations of NO2 in the parts per billion range. X-ray diffraction, X-ray photoelectron spectroscopy, and scanning electron microscopy （SEM） characterizations indicated that the MWCNTs were affected by the morphology of the SnO2 thin film and the particle size. The properties of the MWCNT-doped SnO2 sensor, such as sensitivity, selectivity, and response-recovery time, were investigated. Experimental results revealed that the MWCNT-doped SnO2 thin film sensor response to NO2 gas depended on the operating temperature, NO2 gas concentration, thermal treatment conditions, film thickness, and so on. The mechanism of the gas-sensing property of the MWCNT-doped SnO2 thin film sensor was investigated and showed that the improved gas-sensing performance should be attributed to the effects between MWCNTs （p-type） and SnO2 （n-type） semiconductors.展开更多
The need for reducing the wear in mechanical parts used in the industry makes self-lubricant films one of the sustainable solutions to achieve long-term protection under different environmental conditions.The purpose ...The need for reducing the wear in mechanical parts used in the industry makes self-lubricant films one of the sustainable solutions to achieve long-term protection under different environmental conditions.The purpose of this work is to study the influence of C additions on the tribological behavior of a magnetron-sputtered TiN film in air,water,and seawater.The results show that the addition of C into the TiN binary film induced a new amorphous phase,and the films exhibited a dual phase of fcc(face-centered cubic)-TiN and amorphous carbon.The antifriction and wear-resistance properties were enhanced in air and water by adding 19.1at%C.However,a further increase in the C concentration improved anti-frictional properties but also led to higher wear rates.Although the amorphous phase induced microbatteries and accelerated the corrosion of TiN phases in seawater,the negative abrasion state was detected for all Ti-C-N films due to the adhesion of the tribocorrosion debris on the wear track.展开更多
基金supported by the National High Technology Research and Development Program of China(No.2007AA03Z325 )
文摘An MWCNT-doped （multi-walled carbon nanotube） Sn02 thin film NO2 gas sensor, prepared by radio frequency reactive magnetron sputtering, showed a high sensitivity to ultra-low concentrations of NO2 in the parts per billion range. X-ray diffraction, X-ray photoelectron spectroscopy, and scanning electron microscopy （SEM） characterizations indicated that the MWCNTs were affected by the morphology of the SnO2 thin film and the particle size. The properties of the MWCNT-doped SnO2 sensor, such as sensitivity, selectivity, and response-recovery time, were investigated. Experimental results revealed that the MWCNT-doped SnO2 thin film sensor response to NO2 gas depended on the operating temperature, NO2 gas concentration, thermal treatment conditions, film thickness, and so on. The mechanism of the gas-sensing property of the MWCNT-doped SnO2 thin film sensor was investigated and showed that the improved gas-sensing performance should be attributed to the effects between MWCNTs （p-type） and SnO2 （n-type） semiconductors.
基金financially supported by the National Natural Science Foundation of China (Nos. 52171071, 52172090, 52071159, and 51801081)Portugal National Funds through FCT project (No. 2021.04115)+4 种基金FEDER National funds FCT under the project CEMMPRE–UIDB/ 00285/2020Outstanding University Young Teachers of “Qing Lan Project” of Jiangsu ProvinceExcellent Talents of “Shenlan Project” of Jiangsu University of Science and Technologyand China Merchants Marine Scientific Research and Innovation FundFilipe Fernandes acknowledges the funding received in the aim of the projects: MCTool21– ref. “POCI-01-0247-FEDER-045940”, CEMMPRE–ref. “UIDB/00285/2020”, and SMARTLUB–ref. “POCI-010145-FEDER-031807”
文摘The need for reducing the wear in mechanical parts used in the industry makes self-lubricant films one of the sustainable solutions to achieve long-term protection under different environmental conditions.The purpose of this work is to study the influence of C additions on the tribological behavior of a magnetron-sputtered TiN film in air,water,and seawater.The results show that the addition of C into the TiN binary film induced a new amorphous phase,and the films exhibited a dual phase of fcc(face-centered cubic)-TiN and amorphous carbon.The antifriction and wear-resistance properties were enhanced in air and water by adding 19.1at%C.However,a further increase in the C concentration improved anti-frictional properties but also led to higher wear rates.Although the amorphous phase induced microbatteries and accelerated the corrosion of TiN phases in seawater,the negative abrasion state was detected for all Ti-C-N films due to the adhesion of the tribocorrosion debris on the wear track.
