Depressed Acne Scars—Effective, Minimal Downtime Treatment with a Novel Smooth Motion Non-Insulated Microneedle Radiofrequency Technology

Background: The microneedle fractional RF handpiece used in our study (Intensif Handpiece, EndyMed Medical, Caesarea, Israel) is a novel handpiece that uses a tip with 25 non-insulated, gold plated microneedle electrodes. The needles are inserted into the skin by a specially designed electronically controlled, smooth motion motor minimizing patient discomfort. RF emission delivered over the whole dermal portion of the needle allows effective coagulation resulting in minimal or no bleeding, together with bulk volumetric heating. Study Design/Materials and Methods: The study included 20 patients, treated for depressed acne scars using the IntensifTM?Microneedles handpiece (EndyMed PRO Platform System, EndyMed Medical, Caesarea, Israel). The degree of clinical improvement was assessed by the global aesthetic improvement scale (GAIS) and subjects satisfaction by post treatment questionnaires. Results: The number of treatments per patient varied between 1 and 6 (average 3.3 treatments per patient). Eleven patients (55%) reported none to minimal pain, six (30%) moderate discomfort and only three (15%) reported significant pain. Objective evaluation of the improvement by a board certified dermatologist showed improvement in 95% of patients. 25% showed excellent improvement, 50% experienced good improvement, and the 20% showed minimal improvement. One patient showed no improvement. Conclusions: The presented results show that the tested electronically controlled motorized insertion, non-insulated microneedle treatment technology provides a minimal discomfort, minimal downtime, effective and safe treatment for depressed acne scars.

Intrusion Detection System with Remote Signalling for Vehicles Using an Arduino Controller and Radio-Frequency Technology

Malicious activities or policy violations have been a concern for the past years. For example, many people have been victims of robbery on vehicles. A conceptual diagram of an Intrusion Detection System (IDS) [1] [2] for vehicles with remote signaling using an Arduino controller and radio-frequency technology is proposed in this paper. To address malicious activities on vehicles, two aspects are considered here, namely: notifier and detector. Firstly, an object-oriented C module that puts on and off a controller (installed inside the vehicle) and an anti-theft electronic editing that powered using an alternator and supported by a back-up battery are implemented. Secondly, a magnetic intrusion sensor, controlled by a proximity detector using radio-frequency technology, has been installed on each vehicle door. To enable IDS, a user needs to activate the monitoring system when leaving their vehicle. This is done using a remote system. In case the user does not activate the monitoring system while leaving the vehicle, a 5-meter-proximity detector will automatically lock the system and set off the monitoring system whenever the user is outside the detection zone. The detection zone is a 5-meter radius area centered at the controller. Here, monitoring consists of geolocating any intruders within the detection zone. This means, if any of the vehicle doors is opened while the system is still locked, the controller will activate the vehicle alarm for a few seconds, thereafter send an SMS notification to the owner. The system automatically unlocks as soon as the proximity detector is within the detection zone. The contribution of this paper, as compared to other similar work, is to reinforce the electronic implementation of IDS.

Effects of back gate bias on radio-frequency performance in partially depleted silicon-on-inslator nMOSFETs

The effects of back gate bias(BGEs) on radio-frequency(RF) performances in PD SOI n MOSFETs are presented in this paper. Floating body(FB) device, T-gate body-contact(TB) device, and tunnel diode body-contact(TDBC) device, of which the supply voltages are all 1.2 V, are compared under different back gate biases by different figures of merit, such as cut-off frequency( fT), maximum frequency of oscillation( fmax), etc. Because of the lack of a back gate conducting channel, the drain conductance(gd) of TDBC transistor shows a smaller degradation than those of the others, and the trans-conductance(gm) of TDBC is almost independent of back gate bias. The values of fT of TDBC are also kept nearly constant under different back gate biases. However, RF performances of FB and TB each show a significant degradation when the back gate bias is larger than ～ 20 V. The results indicate that TDBC structures could effectively improve the back gate bias in RF performance.

Design of synthetic aperture radar low-intercept radio frequency stealth

Not confined to a certain point,such as waveform,this paper systematically studies the low-intercept radio frequency(RF)stealth design of synthetic aperture radar(SAR)from the system level.The study is carried out from two levels.In the first level,the maximum low-intercept range equation of the conventional SAR system is deduced firstly,and then the maximum low-intercept range equation of the multiple-input multiple-output SAR system is deduced.In the second level,the waveform design and imaging method of the low-intercept RF SAR system are given and verified by simulation.Finally,the main technical characteristics of the lowintercept RF stealth SAR system are given to guide the design of low-intercept RF stealth SAR system.

Effect of driving frequency on electron heating in capacitively coupled RF argon glow discharges at low pressure

A one-dimensional（1D） fluid model on capacitively coupled radio frequency（RF） argon glow discharge between parallel-plates electrodes at low pressure is established to test the effect of the driving frequency on electron heating. The model is solved numerically by a finite difference method. The numerical results show that the discharge process may be divided into three stages： the growing rapidly stage, the growing slowly stage, and the steady stage. In the steady stage,the maximal electron density increases as the driving frequency increases. The results show that the discharge region has three parts： the powered electrode sheath region, the bulk plasma region and the grounded electrode sheath region. In the growing rapidly stage（at 18 μs）, the results of the cycle-averaged electric field, electron temperature, electron density, and electric potentials for the driving frequencies of 3.39, 6.78, 13.56, and 27.12 MHz are compared, respectively. Furthermore,the results of cycle-averaged electron pressure cooling, electron ohmic heating, electron heating, and electron energy loss for the driving frequencies of 3.39, 6.78, 13.56, and 27.12 MHz are discussed, respectively. It is also found that the effect of the cycle-averaged electron pressure cooling on the electrons is to ＂cool＂ the electrons; the effect of the electron ohmic heating on the electrons is always to ＂heat＂ the electrons; the effect of the cycle-averaged electron ohmic heating on the electrons is stronger than the effect of the cycle-averaged electron pressure cooling on the electrons in the discharge region except in the regions near the electrodes. Therefore, the effect of the cycle-averaged electron heating on the electrons is to ＂heat＂ the electrons in the discharge region except in the regions near the electrodes. However, in the regions near the electrodes, the effect of the cycle-averaged electron heating on the electron is to ＂cool＂ the electrons. Finally, the space distributions of the electron pressure cooling the electron ohmic heating and the electron heating at 1/4 T, 2/4 T, 3/4 T, and 4/4 T in one RF-cycle are presented and compared.

Rydberg electromagnetically induced transparency and Autler–Townes splitting in a weak radio-frequency electric field

We utilize an electromagnetically induced transparency(EIT) of a three-level cascade system involving Rydberg state in a room-temperature cell, formed with a cesium 6 S_(1/2)–6 P_(3/2)–66 S_(1/2) scheme, to investigate the Autler–Townes(AT)splitting resulting from a 15.21-GHz radio-frequency(RF) field that couples the |66 S_(1/2) → |65 P_(1/2) Rydberg transition.The radio-frequency electric field induced AT splitting, γAT, is defined as the peak-to-peak distance of an EIT-AT spectrum.The dependence of AT splitting γAT on the probe and coupling Rabi frequency, ?_p and ?_c, is investigated. It is found that the EIT-AT splitting strongly depends on the EIT linewidth that is related to the probe and coupling Rabi frequency in a weak RF-field regime. Using a narrow linewidth EIT spectrum would decrease the uncertainty of the RF field measurements.This work provides new experimental evidence for the theoretical framework in [J. Appl. Phys. 121, 233106(2017)].

A novel radio frequency coil for veterinary magnetic resonance imaging system

In this article, a novel designed radio frequency （RF） coil is designed and built for the imaging of puppies in a V-shape permanent magnetic resonance imaging （MRI） system. Two sets of Helmholtz coil pairs with a V-shape structure are used to improve the holding of an animal in the coil. The homogeneity and the sensitivity of the RF field in the coil are analysed by theoretical calculation. The size and the shape of the new coil are optimized and validated by simulation through using the finite element method （FEM）. Good magnetic resonance （MR） images are achieved on a shepherd dog.

Comparison of pulse-modulated and continuous operation modes of a radio-frequency inductive ion source

The paper describes an experimental study of the characteristics of a pulse-modulated radiofrequency(RF)discharge sustained at low pressures,typical of the operating modes of RF gridded ion sources.The motivation for the study is the question of whether the RF pulsemodulated mode can increase the efficiency of the ion source.The ion current values extracted from an RF inductive ion source operating in continuous and pulse-modulated modes were compared.The experimental data were also compared with the parameter calculations based on a0D numerical model of the discharge.The measurements showed that the pulse-modulated operation mode of the RF ion source had a noticeable advantage when the power of the RF generator was 140 W or lower.However,as the generator power increased,the advantage was lost because the pulse-modulated operation mode,having a higher RF power instant value,entered the region of existence sooner than the continuous mode,where the ion production cost begins to grow with RF power.

Preparation and Characterization of Transparent Conductive Zinc Doped Tin Oxide Thin Films Prepared by Radio-frequency Magnetron Sputtering

High transparent and conductive thin films of zinc doped tin oxide （ZTO） were deposited on quartz substrates by the radio-frequency （RF） magnetron sputtering using a 12 wt% ZnO doped with 88 wt% SnO2 ceramic target.The effect of substrate temperature on the structural,electrical and optical performances of ZTO films has been studied.X-ray diffraction （XRD） results show that ZTO films possess tetragonal rutile structure with the preferred orientation of （101）.The surface morphology and roughness of the films was investigated by the atomic force microscope （AFM）.The electrical characteristic （including carrier concentration,Hall mobility and resistivity） and optical transmittance were studied by the Hall tester and UV- VIS,respectively.The highest carrier concentration of -1.144×1020 cm-3 and the Hall mobility of 7.018 cm2（V ·sec）-1 for the film with an average transmittance of about 80.0% in the visible region and the lowest resistivity of 1.116×10-2 Ω·cm were obtained when the ZTO films deposited at 250 oC.

Remanufacturing Closed-Loop Supply Chain Model with Radio Frequency Identification Affecting Recycling Rate

In order to construct a resource-saving and environment- friendly society, the advantages of radio frequency identification （RFID） were considered. And it put forward the idea of introducing RFID in the recycling activities of waste products. Taking into account such elements as the technical level of RFID, cost saving from remanufacturing and the cost of RFID tags, both centralized and decentralized supply chain models with different participants in waste product collection were created, in order to determine the optimal pricing strategy and RFID technical level. In the end, sensitivity analyses were conducted to analyze the impacts of scaling parameter for additional increased recovery rate with RFED on pricing and RFID technology level, and impacts of cost saving on the profits of participants in different remanufacturing closed-loop supply chain models.

Ignition dynamics of radio frequency discharge in atmospheric pressure cascade glow discharge

A cascade glow discharge in atmospheric helium was excited by a microsecond voltage pulse and a pulse-modulated radio frequency(RF) voltage, in which the discharge ignition dynamics of the RF discharge burst was investigated experimentally. The spatio-temporal evolution of the discharge, the ignition time and optical emission intensities of plasma species of the RF discharge burst were investigated under different time intervals between the pulsed voltage and RF voltage in the experiment. The results show that by increasing the time interval between the pulsed discharge and RF discharge burst from 5 μs to 20 μs, the ignition time of the RF discharge burst is increased from 1.6 μs to 2.0 μs, and the discharge spatial profile of RF discharge in the ignition phase changes from a double-hump shape to a bell-shape. The light emission intensity at 706 nm and 777 nm at different time intervals indicates that the RF discharge burst ignition of the depends on the number of residual plasma species generated in the pulsed discharges.

Understanding RFID Technology within a Business Intelligence Framework

Radio Frequency Identification (RFID) technology provides new and exciting opportunities for increasing organiza- tional, financial, and operational performance. With its focus on organizational efficiency and effectiveness, RFID technology is superior to barcodes in its ability to provide source automation features that increase the speed and volume of data collection for analysis. Today, applications that employ RFID are growing rapidly and this technology is in a continuous state of evolution and growth. As it continues to progress, RFID provides us with new opportunities to use business intelligence (BI) to monitor organizational operations and learn more about markets, as well as consumer attitudes, behaviors, and product preferences. This technology can even be used to prevent potentially faulty or spoiled products from ending up in the hands of consumers. However, RFID offers significant challenges to organizations that attempt to employ this technology. Most significantly, there exists the potential for RFID to overwhelm data collection and BI analytic efforts if organizations fail to effectively address RFID data integration issues. To this end, the purpose of this article is to explicate the dynamic technology of RFID and how it is being used today. Additionally, this article will provide insights into how RFID technology is evolving and how this technology relates to BI and issues related to data integration. This knowledge has never been more essential. While IT academic research into RFID development and issues has declined in recent years, RFID continues to be a vital area of exploration, especially as it relates to BI in the 21st century.

Radio Frequency Fingerprint-Based Satellite TT&C Ground Station Identification Method

This study presents a radio frequency(RF)fingerprint identification method combining a convolutional neural network(CNN)and gated recurrent unit(GRU)network to identify measurement and control signals.The proposed algorithm(CNN-GRU)uses a convolutional layer to extract the IQ-related learning timing features.A GRU network extracts timing features at a deeper level before outputting the final identification results.The number of parameters and the algorithm’s complexity are reduced by optimizing the convolutional layer structure and replacing multiple fully-connected layers with gated cyclic units.Simulation experiments show that the algorithm achieves an average identification accuracy of 84.74% at a -10 dB to 20 dB signal-to-noise ratio(SNR)with fewer parameters and less computation than a network model with the same identification rate in a software radio dataset containing multiple USRP X310s from the same manufacturer,with fewer parameters and less computation than a network model with the same identification rate.The algorithm is used to identify measurement and control signals and ensure the security of the measurement and control link with theoretical and engineering applications.

Designing Wireless Charger Circuit for Hearing Aids Using Radio Frequency Waves

In this paper, an attempt has been made to produce a recipient system of wireless charge for a simple hearing aid so that electrical signal would be generated through detecting and receiving radio frequency waves (RF). The purpose of this design is to receive wireless charge for hearing aids and basically for any electronic device which is not required to a high energy for being setup. In this study, it has been demonstrated that as the amount of radio receiving energy increases, distance of receiver from antenna should be decreased;otherwise, either maximum amount of the receiving energy, or signal power density of the transmitter should be increased. Since it is impossible to be performed, it is decided to set up an energy receiving system constructed by rectenna and charge Circuit and to adjust their parameters to provide energy requirements for a device with low-power consumption. In this paper, different components of an energy receiving system from radio frequency band have been mentioned and a diagram block has been suggested. Subsequently, input impedance of designed antenna has been adjusted by provided relations. This impedance should be adjusted with the total impedance of regarded hearing aid Circuit by which the highest amount of received signal power is transferred to the battery of hearing aids. Received signal is converted to a dc voltage by rectifier diode. Finally, by applying a voltage regulator which has been designed using a common-collector amplifier not only the output voltage is kept constant, but the power is also strengthened. The battery of the hearing aids will be charged using the obtained power and voltage.

Non-Thermal Radio Frequency Stimulation Inhibits the Tryptophan Synthase Beta Subunit in the Algae <i>Chlamydomonas reinhardtii</i>

To demonstrate the ability of the Nativis signal transduction technology (Butters et al. 2014) to modulate the expression of algae mRNA and protein, we tested if we can alter specific enzyme levels in Chlamydomonas reinhardtii. We inhibited the synthesis of the enzyme tryptophan synthase beta subunit (MAA7) by applying the signal derived from a published siRNA (Zhao et al. 2009). With lower levels of MAA7, Chlamydomonas reinhardtii can grow in the presence of the prodrug 5-Fluoroindole (5-FI), because less 5-Fluoroin-dole can be converted to the toxic 5-Fluoro-L-tryptophan (5-FT). We find a 24% (&plusmn;5%) increase of growth with the signal versus no signal. To see if that effect was due to the reduction of the amount of mRNA encoding MAA7, we used Real-Time Quantitative PCR (RT-QPCR) to measure the levels of MAA7 mRNA. To normalize the MAA7 mRNA level, we compared them to the levels of a mRNA that is not affected by the signal (G protein beta subunit-like polypeptide, Cblp). Two conditions increase the effectiveness of the signal. One can either treat the cell cultures during the logarithmic growth phase (starting the cultures at density of 0.104 OD at 750 nm). Or one can treat the cultures at a later stage of the logarithmic growth, but treating them for a longer time (8.7% versus 3.5% of the culture time). Under these conditions we found around a 50% decrease in the mRNA levels for MAA7. Treating the cultures at the earlier growth phase or at a later growth phase is less effective, with only a 20% effect.

Performance of Double-Pole Four-Throw Double-Gate RF CMOS Switch in 45-nm Technology

In this paper, we have investigated the design parameters of RF CMOS switch, which will be used for the wireless tele-communication systems. A double-pole four-throw double-gate radio-frequency complementary-metal-oxide-semicon- ductor (DP4T DG RF CMOS) switch for operating at the 1 GHz is implemented with 45-nm CMOS process technology. This proposed RF switch is capable to select the data streams from the two antennas for both the transmitting and receiving processes. For the development of this DP4T DG RF CMOS switch we have explored the basic concept of the proposed switch circuit elements required for the radio frequency systems such as drain current, threshold voltage, resonant frequency, return loss, transmission loss, VSWR, resistances, capacitances, and switching speed.

Analytical and Numerical Model Confrontation for Transfer Impedance Extraction in Three-Dimensional Radio Frequency Circuits

3D chip stacking is considered known to overcome conventional 2D-IC issues, using through silicon vias to ensure vertical signal transmission. From any point source, embedded or not, we calculate the impedance spread out;our ultimate goal will to study substrate noise via impedance field method. For this, our approach is twofold: a compact Green function or a Transmission Line Model over a multi-layered substrate is derived by solving Poisson’s equation analytically. The Discrete Cosine Transform (DCT) and its variations are used for rapid evaluation. Using this technique, the substrate coupling and loss in IC’s can be analyzed. We implement our algorithm in MATLAB;it permits to extract impedances between any pair of embedded contacts. Comparisons are performed using finite element methods.

Aerodynamic actuation characteristics of radio-frequency discharge plasma and control of supersonic flow

In this paper, aerodynamic actuation characteristics of radio-frequency(RF) discharge plasma are studied and a method is proposed for shock wave control based on RF discharge. Under the static condition, a RF diffuse glow discharge can be observed; under the supersonic inflow, the plasma is blown downstream but remains continuous and stable.Time-resolved schlieren is used for flow field visualization. It is found that RF discharge not only leads to continuous energy deposition on the electrode surface but also induces a compression wave. Under the supersonic inflow condition, a weak oblique shock wave is induced by discharge. Experimental results of the shock wave control indicate that the applied actuation can disperse the bottom structure of the ramp-induced oblique shock wave, which is also observed in the extracted shock wave structure after image processing. More importantly, this control effect can be maintained steadily due to the continuous high-frequency(MHz) discharge. Finally, correlations for schlieren images and numerical simulations are employed to further explore the flow control mechanism. It is observed that the vortex in the boundary layer increases after the application of actuation, meaning that the boundary layer in the downstream of the actuation position is thickened. This is equivalent to covering a layer of low-density smooth wall around the compression corner and on the ramp surface, thereby weakening the compressibility at the compression corner. Our results demonstrate the ability of RF plasma aerodynamic actuation to control the supersonic airflow.

Insights into Three-Dimensional Radiofrequency Circuits Connections

The authors state briefly the possibility of various simulators to handle propagation of electromagnetic waves along some interconnections, in 3D RF （Radio Frequency） circuits. The studies are first derived in the time domain： a Finite-Difference Time-Domain method is applied, taking spectra via FFTs （Fast Fourier Transform） as post-processors. Electric and magnetic field distributions, pulse propagations along stripline structures or vias are highlighted. The scattering parameters for various cases are extracted and compared. Some original issue of this work is an insight on crosstalk or shielding phenomena between lines.