Despite being one of the oldest and most widely-used turbulence models in engineering computational fluid dynamics(CFD),the k-ωmodel has not been fully understood theoretically because of its high nonlinearity and co...Despite being one of the oldest and most widely-used turbulence models in engineering computational fluid dynamics(CFD),the k-ωmodel has not been fully understood theoretically because of its high nonlinearity and complex model parameter setting.Here,a multi-layer analytic expression is postulated for two lengths(stress and kinetic energy lengths),yielding an analytic solution for the k-ωmodel equations in pipe flow.Approximate local balance equations are analyzed to determine the key parameters in the solution,which are shown to be rather close to the empirically-measured values from the numerical solution of the Wilcox k-ωmodel,and hence the analytic construction is fully validated.The results provide clear evidence that the k-ωmodel sets in it a multilayer structure,which is similar to but different,in some insignificant details,from the Navier-Stokes(N-S)turbulence.This finding explains why the k-ωmodel is so popular,especially in computing the near-wall flow.Finally,the analysis is extended to a newlyrefined k-ωmodel called the structural ensemble dynamics(SED)k-ωmodel,showing that the SED k-ωmodel has improved the multi-layer structure in the outer flow but preserved the setting of the k-ωmodel in the inner region.展开更多
New energy vehicles have better clean and environmental protection characteristics than traditional fuel vehicles.The new energy engine cooling technology is critical in the design of new energy vehicles.This paper us...New energy vehicles have better clean and environmental protection characteristics than traditional fuel vehicles.The new energy engine cooling technology is critical in the design of new energy vehicles.This paper used oneand three-way joint simulation methods to simulate the refrigeration system of new energy vehicles.Firstly,a k-εturbulent flow model for the cooling pump flow field is established based on the principle of computational fluid dynamics.Then,the CFD commercial fluid analysis software FLUENT is used to simulate the flow field of the cooling pump under different inlet flow conditions.This paper proposes an optimization scheme for new energy vehicle engines’“boiling”phenomenon under high temperatures and long-time climbing conditions.The simulation results show that changing the radiator’s structure and adjusting the thermostat’s parameters can solve the problem of a“boiling pot.”The optimized new energy vehicle engine can maintain a better operating temperature range.The algorithm model can reference each cryogenic system component hardware selection and control strategy in the new energy vehicle’s engine.展开更多
The internal turbulent flow in conical diffuser is a very complicated adverse pressure gradient flow.DLR k-ε turbulence model was adopted to study it.The every terms of the Laplace operator in DLR k-ε turbulence mod...The internal turbulent flow in conical diffuser is a very complicated adverse pressure gradient flow.DLR k-ε turbulence model was adopted to study it.The every terms of the Laplace operator in DLR k-ε turbulence model and pressure Poisson equation were discretized by upwind difference scheme.A new full implicit difference scheme of 5-point was constructed by using finite volume method and finite difference method.A large sparse matrix with five diagonals was formed and was stored by three arrays of one dimension in a compressed mode.General iterative methods do not work wel1 with large sparse matrix.With algebraic multigrid method(AMG),linear algebraic system of equations was solved and the precision was set at 10-6.The computation results were compared with the experimental results.The results show that the computation results have a good agreement with the experiment data.The precision of computational results and numerical simulation efficiency are greatly improved.展开更多
基金the National Numerical Wind Tunnel(No.NNW2019ZT1-A03)the National Natural Science Foundation of China(Nos.91952201,11372008,and 11452002)。
文摘Despite being one of the oldest and most widely-used turbulence models in engineering computational fluid dynamics(CFD),the k-ωmodel has not been fully understood theoretically because of its high nonlinearity and complex model parameter setting.Here,a multi-layer analytic expression is postulated for two lengths(stress and kinetic energy lengths),yielding an analytic solution for the k-ωmodel equations in pipe flow.Approximate local balance equations are analyzed to determine the key parameters in the solution,which are shown to be rather close to the empirically-measured values from the numerical solution of the Wilcox k-ωmodel,and hence the analytic construction is fully validated.The results provide clear evidence that the k-ωmodel sets in it a multilayer structure,which is similar to but different,in some insignificant details,from the Navier-Stokes(N-S)turbulence.This finding explains why the k-ωmodel is so popular,especially in computing the near-wall flow.Finally,the analysis is extended to a newlyrefined k-ωmodel called the structural ensemble dynamics(SED)k-ωmodel,showing that the SED k-ωmodel has improved the multi-layer structure in the outer flow but preserved the setting of the k-ωmodel in the inner region.
文摘New energy vehicles have better clean and environmental protection characteristics than traditional fuel vehicles.The new energy engine cooling technology is critical in the design of new energy vehicles.This paper used oneand three-way joint simulation methods to simulate the refrigeration system of new energy vehicles.Firstly,a k-εturbulent flow model for the cooling pump flow field is established based on the principle of computational fluid dynamics.Then,the CFD commercial fluid analysis software FLUENT is used to simulate the flow field of the cooling pump under different inlet flow conditions.This paper proposes an optimization scheme for new energy vehicle engines’“boiling”phenomenon under high temperatures and long-time climbing conditions.The simulation results show that changing the radiator’s structure and adjusting the thermostat’s parameters can solve the problem of a“boiling pot.”The optimized new energy vehicle engine can maintain a better operating temperature range.The algorithm model can reference each cryogenic system component hardware selection and control strategy in the new energy vehicle’s engine.
基金Projects(59375211,10771178,10676031) supported by the National Natural Science Foundation of ChinaProject(07A068) supported by the Key Project of Hunan Education CommissionProject(2005CB321702) supported by the National Key Basic Research Program of China
文摘The internal turbulent flow in conical diffuser is a very complicated adverse pressure gradient flow.DLR k-ε turbulence model was adopted to study it.The every terms of the Laplace operator in DLR k-ε turbulence model and pressure Poisson equation were discretized by upwind difference scheme.A new full implicit difference scheme of 5-point was constructed by using finite volume method and finite difference method.A large sparse matrix with five diagonals was formed and was stored by three arrays of one dimension in a compressed mode.General iterative methods do not work wel1 with large sparse matrix.With algebraic multigrid method(AMG),linear algebraic system of equations was solved and the precision was set at 10-6.The computation results were compared with the experimental results.The results show that the computation results have a good agreement with the experiment data.The precision of computational results and numerical simulation efficiency are greatly improved.
