A Study on Multivariable Interactions Concerning Radar Cross Section Reduction through Geometric Attributes

This resolution 5 (25−1 factorial) study aimed to ascertain an understanding of the interactions between different geometries on the resulting Radar Cross Section (RCS) of a target. The results of the study are in line with the general understanding of the impact different geometries have on RCS but show that geometries can also influence the variance of measured RCS, and typical attributes that reduce RCS increase the variance of the measured RCS. Notably, an increased angle between the front face of a plate and the direction of the radar signal decreased RCS but increased the variance of the RCS measured.

Cross section determination of^(27)Al(n,2n)^(26)Al reaction induced by 14-MeV neutrons uniting with D-T neutron activation and AMS techniques

Aluminum is the primary structural material in nuclear engineering,and its cross section induced by 14-MeV neutrons is of great significance.To address the issue of insufficient accuracy for the^(27)Al(n,2n)^(26)Al reaction cross section,the activation method and accelerator mass spectrometry(AMS)technique were used to determine the^(27)Al(n,2n)^(26)Al cross section,which could be used as a D-T plasma ion temperature monitor in fusion reactors.At the China Academy of Engineering Physics,neutron activation was performed using a K-400 neutron generator produced by the T(d,n)4He reaction.The^(26)Al∕^(27)Al isotope ratios were measured using the newly installed GYIG 1 MV AMS at the Institute of Geochemistry,Chinese Academy of Sciences.The neutron flux was monitored by measuring the activity of 92mNb produced by the 93Nb(n,2n)92mNb reaction.The measured results were compared with available data in the experimental nuclear reaction database,and the measured values showed a reasonable degree of consistency with partially available literature data.The newly acquired cross-sectional data at 12 neutron energy points through systematic measurements clarified the divergence,which has two different growth trends from the existing experimental values.The obtained results are also compared with the corresponding evaluated database,and the newly calculated excitation functions with TALYS−1.95 and EMPIRE−3.2 codes,the agreement with CENDL−3.2,TENDL-2021 and EMPIRE−3.2 results are generally acceptable.A substantial improvement in the knowledge of the^(27)Al(n,2n)^(26)Al reaction excitation function was obtained in the present work,which will lay the foundation for the diagnosis of the fusion ion temperature,testing of the nuclear physics model,evaluation of nuclear data,etc.

State-selective charge exchange cross sections in collisions of highly-charged sulfur ions with helium and molecular hydrogen

The state-selective cross section data are useful for understanding and modeling the x-ray emission in celestial observations.In the present work,using the cold target recoil ion momentum spectroscopy,for the first time we investigated the state-selective single electron capture processes for S^(q+)–He and H_(2)(q=11–15)collision systems at an impact energy of q×20 keV and obtained the relative state-selective cross sections.The results indicate that only a few principal quantum states of the projectile energy level are populated in a single electron capture process.In particular,the increase of the projectile charge state leads to the population of the states with higher principal quantum numbers.It is also shown that the experimental averaged n-shell populations are reproduced well by the over-barrier model.The database is openly available in Science Data Bank at 10.57760/sciencedb.j00113.00091.

Absolute partial and total ionization cross sections of carbon monoxide with electron collision from 350 eV to 8000 eV

The absolute partial and total cross sections for electron impact ionization of carbon monoxide are reported for electron energies from 350 eV to 8000 eV.The product ions(CO^(+),C^(+),O^(+),CO^(2+),C^(2+),and O^(2+))are measured by employing an ion imaging mass spectrometer and two ion-pair dissociation channels(C^(+)+O^(+)and C^(2+)+O^(+))are identified.The absolute cross sections for producing individual ions and their total,as well as for the ion-pair dissociation channels are obtained by normalizing the data of CO^(+)to that of Ar^(+)from CO-Ar mixture target with a fixed 1:1 ratio.The overall errors are evaluated by considering various kinds of uncertainties.A comprehensive comparison is made with the available data,which shows a good agreement with each other over the energy ranges that are overlapped.This work presents new cross-section data with electron energies above 1000 eV.

Measurement of the neutron-induced total cross sections of ^(nat)Pb from 0.3 eV to 20 MeV on the Back-n at CSNS

The neutron-induced total cross sections of natural lead have been measured in a wide energy range(0.3 eV-20 MeV)on the back-streaming white neutron beamline(Back-n)at the China Spallation Neutron Source.Neutron energy was determined by the neutron total cross-section spectrometer using the time-of-flight technique.A fast multi-cell fission chamber was used as the neutron detector,and a 10-mm-thick high-purity natural lead sample was employed for the neutron transmission measurements.The on-beam background was determined using Co,In,Ag,and Cd filters.The excitation function of ^(nat)Pb(n,tot)reaction below 20 MeV was calculated using the TALYS-1.96 nuclear-reaction modeling program.The present results were compared with previous results,the evaluated data available in the five major evaluated nuclear data libraries(i.e.,ENDF/B-VIII.0,JEFF-3.3,JENDL-5,CENDL-3.2,and BROND-3.1),and the theoretical calculation curve.Good agreement was found between the new results and those of previous experiments and with the theoretical curves in the corresponding region.This measurement obtained the neutron total cross section of natural lead with good accuracy over a wide energy range and added experimental data in the resonance energy range.This provides more reliable experimental data for nuclear engineering design and nuclear data evaluation of lead.

Oscillatory Dynamics of a Spherical Solid in a Liquid in an Axisymmetric Variable Cross Section Channel

The dynamics of a solid spherical body in an oscillating liquid flow in a vertical axisymmetric channel of variable cross section is experimentally studied.It is shown that the oscillating liquid leads to the generation of intense averaged flows in each of the channel segments.The intensity and direction of these flows depend on the dimensionless oscillating frequency.In the region of studied frequencies,the dynamics of the considered body is examined when the primary vortices emerging in the flow occupy the whole region in each segment.For a fixed frequency,an increase in the oscillation amplitude leads to a phase-inclusion holding effect,i.e.,the body occupies a quasi-stationary position in one of the cells of the vertical channel,while oscillating around its average position.It is also shown that the oscillating motion of a liquid column generates an averaged force acting on the body,the magnitude of which depends on the properties of the body and its position in the channel.The quasi-stationary position is determined by the relative density and size of the body,as well as the dimensionless frequency.The behavior of the body as a function of the amplitude and frequency of fluid oscillation and relative size is discussed in detail.Such findings may be used in the future to control the position of a phase inclusion and/or to strengthen mass transfer effects in a channel of variable cross section by means of fluid oscillations.

Dyslipidemia in Adults with Type 2 Diabetes in a Rural Community in Ganadougou, Mali: A Cross-Sectional Study

Dyslipidemia is a disorder where abnormally lipid concentrations circulate in the bloodstream. The disorder is common in type 2 diabetics (T2D) and is linked with T2D comorbidities, particularly cardiovascular disease. Dyslipidemia in T2D is typically characterized by elevated plasma triglyceride and low high-density lipoprotein cholesterol (HDL-C) levels. There is a significant gap in the literature regarding dyslipidemia in rural parts of Africa, where lipid profiles may not be captured through routine surveillance. This study aimed to characterize the prevalence and demo-graphic profile of dyslipidemia in T2D in the rural community of Ganadougou, Mali. We performed a cross-sectional study of 104 subjects with T2D in Ganadougou between November 2021 and March 2022. Demographic and lipid profiles were collected through cross-sectional surveys and serological analyses. The overall prevalence of dyslipidemia in T2D patients was 87.5% (91/104), which did not differ by sex (P = .368). High low-density lipoprotein cholesterol (LDL-C) was the most common lipid abnormality (78.9%, [82/104]). Dyslipidemia was associated with age and hypertension status (P = .013 and.036, respectively). High total and high LDL-C parameters were significantly associated with hypertension (P = .029 and .006, respectively). In low-resource settings such as rural Mali, there is a critical need to improve infrastructure for routine dyslipidemia screening to guide its prevention and intervention approaches. The high rates of dyslipidemia observed in Gandadougou, consistent with concomitant increases in cardiovascular diseases in Africa suggest that lipid profile assessments should be incorporated into routine medical care for T2D patients in African rural settings.

Patterns of Infertility and Abortion in Saudi Arabia: A Cross-Sectional Study

Background: Infertility and abortion are significant reproductive health concerns globally, impacting individuals' well-being and healthcare systems. In Saudi Arabia, cultural, social, and religious factors influence perceptions and management of these issues, necessitating research to understand the patterns and associated factors. Study Aim: This cross-sectional study aimed to investigate the patterns of infertility and abortion among 458 women in Saudi Arabia, focusing on demographic profiles, reproductive histories, medical conditions, and lifestyle factors. Methodology: Participants were recruited from healthcare facilities, and data on age, BMI, reproductive history, medical conditions, assisted reproduction methods, and lifestyle behaviors were collected. Statistical analyses, including chi-square tests, were conducted to examine associations between variables. Results: The majority of participants were aged 30 - 39 years (47.4%), with 76.9% experiencing secondary infertility. Among those with offspring (76.9%), 31% reported using assisted reproduction methods, primarily ovarian stimulators (54.2%). Abortion history was reported by 39.5% of participants. Significant associations were found between age and infertility type (X2 = 5.8, p = 0.054), having offspring and infertility type (X2 = 458.0, p = 0.001), menstrual irregularity and infertility type (X2 = 11.4, p = 0.001), and abortion history and delayed fertility (X2 = 10.4, p = 0.001). Conclusion: Our study reveals significant associations between demographic, medical, and lifestyle factors with infertility patterns and abortion history among Saudi women. These findings emphasize the need for tailored interventions addressing medical conditions, age-related factors, and access to reproductive healthcare services.

First Born Double Differential Cross-Section for Ionization of H (3d) by Incident Electron Impact

Double differential cross section (DDCS) of First-Born approximation is calcu-lated for the ionization of metastable 3d-state hydrogen atoms by electron impact energy at 150 eV and 250 eV. A multiple scattering theory is applied in the present study. The present results are compared with the other related the-oretical results for the ionization of hydrogen atoms from different metastable states and ground-state experimental results. The findings demonstrate a strong qualitative agreement with the existing results. The obtained results have an extensive scope for further study of such an ionization process.

Measurement of Br(n,γ)cross sections up to stellar s-process temperatures at the CSNS Back‑n

The neutron capture cross sections(n,γ)of bromine were obtained using the time-of-flight technique at the Back-n facility of the China Spallation Neutron Source.Promptγ-rays originating from neutron-induced capture events were detected using four C_(6)D_(6) detectors.The pulse-height weighting technique and double-bunch unfolding method based on Bayesian theory were used in the data analysis.Background deductions,normalization,and corrections were carefully considered to obtain reliable measurement results.The multilevel R-matrix Bayesian code SAMMY was used to extract the resonance parameters in the resolved resonance region(RRR).The average cross sections in the unresolved resonance region(URR)were obtained from 10 to 400 keV.The experimental results were compared with data from several evaluated libraries and previous experi-ments in the RRR and URR.The TALYS code was used to describe the average cross sections in the URR.The astrophysical Maxwell average cross sections(MACSs)of ^(79,81)Br from kT=5 to 100 keV were calculated over a sufficiently wide range of neutron energies.At a thermal energy of kT=30 keV,the MACS value for ^(79)Br 682±68 mb was in good agreement with the KADoNiS v1.0 recommended value.By contrast,the value of 293±29 mb for ^(81)Br was substantially higher than that of the evaluated database and the KADoNiS v1.0 recommended value.

Progress of photonuclear cross sections for medical radioisotope production at the SLEGS energy domain

Photonuclear reactions using a laser Compton scattering(LCS)gamma source provide a new method for producing radioisotopes for medical applications.Compared with the conventional method,this method has the advantages of a high specific activity and less heat.Initiated by the Shanghai Laser Electron Gamma Source(SLEGS),we conducted a survey of potential photonuclear reactions,(γ,n),(γ,p),and(γ,γ')whose cross sections can be measured at SLEGS by summarising the experimental progress.In general,the data are rare and occasionally inconsistent.Therefore,theoretical calculations are often used to evaluate the production of medical radioisotopes.Subsequently,we verified the model uncertainties of the widely used reaction code TALYS-1.96,using the experimental data of the^(100)Mo(γ,n)^(99)Mo,^(65)Cu(γ,n)^(64)Cu,and^(68)Zn(γ,p)^(67)Cu reactions.

Measurement of the ^(232)Th(n,f)cross section in the 1-200 MeV range at the CSNS Back-n

The ^(232)Th(n,f)cross section is very important in basic nuclear physics and applications based on the Th/U fuel cycle.Using the time-of-flight method and a multi-cell fast-fission ionization chamber,a novel measurement of the^(232)Th(n,f)cross sec-tion relative to^(235)U in the 1–200 MeV range was performed at the China Spallation Neutron Source Back-n white neutron source(Back-n).The fission event-neutron energy spectra of^(232)Th and^(235)U fission cells were measured in the single-bunch mode.Corrected 232Th/235U fission cross-sectional ratios were obtained,and the measurement uncertainties were 2.5–3.7%for energies in the 2–20 MeV range and 3.6–6.2%for energies in the 20–200 MeV range.The^(232)Th(n,f)cross section was obtained by introducing the standard cross section of^(235)U(n,f).The results were compared with those of previous theoreti-cal calculations,measurements,and evaluations.The measured 232Th fission cross section agreed with the main evaluation results in terms of the experimental uncertainty,and 232Th fission resonances were observed in the 1–3 MeV range.The present results provide^(232)Th(n,f)cross-sectional data for the evaluation and design of Th/U cycle nuclear systems.

Conceptual design of a Cs2LiLaBr6 scintillator‑based neutron total cross section spectrometer on the back‑n beam line at CSNS

To reduce the experimental uncertainty in the 235 U resonance energy region and improve the detection efficiency for neutron total cross section measurements compared with those obtained with the neutron total cross section spectrometer(NTOX), a dedicated lithium-containing scintillation detector has been developed on the Back-n beam line at the China Spallation Neutron Source. The Fast Scintillator-based Neutron Total Cross Section(FAST) spectrometer has been designed based on a Cs2Li La Br6(CLLB) scintillator considering the γ-ray flash and neutron environment on the Back-n beam line. The response of the CLLB scintillator to neutrons and γ-rays was evaluated with different 6Li/7 Li abundance ratios using Geant4. The neutron-γdiscrimination performance of the CLLB has been simulated considering different scintillation parameters, physical designs,and light readout modes. A cubic 6Li-enriched( > 90%) CLLB scintillator, which has a thickness of 4-9 mm and side length of no less than 50 mm to cover the Φ 50 mm neutron beam at the spectrometer position, has been proposed coupling to a side readout SiPM array to construct the FAST spectrometer. The developed simulation techniques for neutron-γ discrimination performance could provide technical support for other neutron-induced reaction measurements on the Back-n beam line.

Measurement of^(134)Xe(n,2n)^(133m),gXe reaction cross sections in 14‑MeV region with detailed uncertainty quantification

A lead-shielded HPGe detector and offlineγ-ray spectra of the residual product were used to measure the cross section(CS)and ratios of isomeric CS(σm/σg)in^(134)Xe(n,2n)^(133m),gXe reactions at different energies(13.5 MeV,13.8 MeV,14.1 MeV,14.4 MeV,14.8 MeV)relative to the^(93)Nb(n,2n)^(92)mNb reaction CS.The target was high-purity natural Xe gas under high pressure.The T(d,n)4He reaction produces neutrons.TALYS code(version 1.95)for nuclear reactions was used for calculations,with default parameters and nuclear level density models.The uncertainties in the measured CS data were thoroughly analyzed using the covariance analysis method.The results were compared with theoretical values,evaluation data,and previous experimental findings.CS data of the 134Xe(n,2n)133mXe and 134Xe(n,2n)133gXe reactions and the corresponding isomeric CS ratios at 13.5 MeV,13.8 MeV,and 14.1 MeV neutron energies are reported for the first time.This research advances our knowledge of pre-equilibrium emission in the(n,2n)reaction channel by resolving inconsistencies in the Xe data.

Solution for polarimetric radar cross section measurement and calibration

The exact radar cross-section （RCS） measurement is difficult when the scattering of targets is low. Ful polarimetric cali-bration is one technique that offers the potential for improving the accuracy of RCS measurements. There are numerous polarimetric calibration algorithms. Some complex expressions in these algo-rithms cannot be easily used in an engineering practice. A radar polarimetric coefficients matrix （RPCM） with a simpler expression is presented for the monostatic radar polarization scattering matrix （PSM） measurement. Using a rhombic dihedral corner reflector and a metal ic sphere, the RPCM can be obtained by solving a set of equations, which can be used to find the true PSM for any target. An example for the PSM of a metal ic dish shows that the proposed method obviously improves the accuracy of cross-polarized RCS measurements.

Recognition of the major scattering sources on complex targets based on the high frequency radar cross section integrated calculation technique

Based on the high frequency （HF） integrated radar cross section （RCS） calculation approach, a technique of detecting major scattering source is developed by using an appropriate arithmetic for scattering distribution and scattering source detection. For the perfect adaptability to targets and the HF of the HF integrated RCS calculation platform, this technique is suitable to solve large complex targets and has lower requirement to the target modeling. A comparison with the result of 2-D radar imaging confirms the accuracy and reliability of this technique in recognition of the major scattering source on complex targets. This technique provides the foundation for rapid integrated evaluation of the scattering performance and 3-D scattering model reconstruction of large complex targets.

Radar Cross Section Prediction and Reduction for Naval Ships

Radar cross section（RCS） is the measurement of the reflective strength of a target.Reducing the RCS of a naval ship enables its late detection,which is useful for capitalizing on elements of surprise and initiative.Thus,the RCS of a naval ship has become a very important design factor for achieving surprise,initiative,and survivability.Consequently,accurate RCS determination and RCS reduction are of extreme importance for a naval ship.The purpose of this paper is to provide an understanding of the theoretical background and engineering approach to deal with RCS prediction and reduction for naval ships.The importance of RCS,radar fundamentals,RCS basics,RCS prediction methods,and RCS reduction methods for naval ships is also discussed.

Impact of emulsification of crude oil on normalized radar cross section

The emulsification of crude oil is caused by the oil flowing into the water,resulting in the increase of oil film tension,viscosity,water content,and volume,which brings great harm to the marine ecological environment and difficulties for the cleanup of marine emergency equipment.The realization observation of emulsification crude oil will increase the response speed of marine emergency response.Therefore,we set up crude oil emulsification samples to study the physical property in laboratory and conducted radar measurements at different incidence angles in outdoor.The radar is C band in resolution of 0.7 m by 0.7 m.A fully polarimetric scatterometer(HH,VV,and VH/HV)is mounted at 1.66 m(minimum altitude)height at an incidence angle between 35°and 60°.An asphalt content of less than 3%crude oil and the filtered seawater were used to the outdoor emulsification scattering experiment.The measurement results are as follows.The water content can be used to describe the process of emulsification and it is easy to measure.Wind speed,asphalt content,seawater temperature,and photo-oxidation affect the emulsifying process of crude oil,and affects the normalized radar cross section(NRCS)of oil film but wind is not the dominant factor.It is the first time to find that the emulsification of crude oil results in an increase of NRCS.

Radar Cross Section Analysis Using Physical Optics and Its Applications to Marine Targets

Radar Cross Section (RCS) is one of the most considerable parameters for ship stealth design. As modern ships are larger than their predecessors, RCS must be managed at each design stage for its reduction. For predicting RCS of ship, Radar Cross Section Analysis Program (RACSAN) based on Kirchhoff approximation in high frequency range has been developed. This program can present RCS including multi-bounce effect in exterior and interior structure by combination of geometric optics (GO) and physical optics (PO) methods, coating effect by using Fresnel reflection coefficient, and response time pattern for detected target. In this paper, RCS calculations of ship model with above effects are simulated by using this developed program and RCS results are discussed.

Ultra-wideband low radar cross-section metasurface and its application on waveguide slot antenna array

A novel approach devoted to achieving ultra-wideband radar cross section reduction（RCSR） of a waveguide slot antenna array（WGSAA） while maintaining its radiation performance is proposed. Three kinds of artificial magnetic conductors（AMCs） tiles consisting of three types of basic units resonant at different frequencies are designed and arranged in a novel quadruple-triangle-type configuration to create a composite planar metasurface. The proposed metasurface is characterized by low radar feature over an ultra-wideband based on the principle of phase cancellation. Both simulated and measured results demonstrate that after the composite metasurface is used to cover part of the antenna array, an ultrawideband RCSR involving in-band and out-of-band is achieved for co-and cross-polarized incident waves based on energy cancellation, while the radiation performance is well retained. The proposed method is simple, low-cost, and easy-tofabricate, providing a new method for ultra-wideband RCSR of an antenna array. Moreover, the method proposed in this paper can easily be applied to other antenna architectures.