Evaluation of the Shallow Gas Hydrate Production Based on the Radial Drilling-Heat Injection-Back Fill Method

It has been evidenced that shallow gas hydrate resources are abundant in deep oceans worldwide.Their geological back-ground,occurrence,and other characteristics differ significantly from deep-seated hydrates.Because of the high risk of well construction and low production efficiency,they are difficult to be recovered by using conventional oil production methods.As a result,this paper proposes an alternative design based on a combination of radial drilling,heat injection,and backfilling methods.Multi-branch holes are used to penetrate shallow gas hydrate reservoirs to expand the depressurization area,and heat injection is utilized as a supplement to improve gas production.Geotechnical information collected from an investigation site close to the offshore production well in the South China Sea is used to assess the essential components of this plan,including well construction stability and gas production behavior.It demonstrates that the hydraulic fracturing of the 60mbsf overburden layer can be prevented by regulating the drilling fluid densities.However,the traditional well structure is unstable,and the suction anchor is advised for better mechanical performance.The gas produc-tion rate can be significantly increased by combining hot water injection and depressurization methods.Additionally,the suitable produc-tion equipment already in use is discussed.

Endoscopic radial incision and cutting method for adult congenital duodenal webs:A case report

BACKGROUND Congenital duodenal webs are rare in adults and can lead to various symptoms such as nausea,vomiting,and postprandial fullness.The treatment for this disease is mostly surgical.Endoscopic treatment techniques have been developed and attempted for this disease.Endoscopic radial incision and cutting(RIC)techniques are reportedly very effective in benign anastomotic stricture.This case report highlights the effectiveness and safety of endoscopic RIC as a minimally invasive treatment for adult congenital duodenal webs.CASE SUMMARY A 23-year-old female patient with indigestion was referred to a tertiary hospital.The patient complained of postprandial fullness in the epigastric region.Previous physical examinations or blood tests indicated no abnormalities.Computed tomography revealed an eccentric broad-based delayed-enhancing mass-like lesion in the second portion of the duodenum.Endoscopy showed an enlarged gastric cavity and a significantly dilated duodenal bulb;a very small hole was observed in the distal part of the second portion,and scope passage was not possible.Gastrografin upper gastrointestinal series was performed,revealing an intraduodenal barium contrast-filled sac with a curvilinear narrow radiolucent rim,a typical"windsock"sign.Endoscopic RIC was performed on the duodenal web.The patient recovered uneventfully.Follow-up endoscopy showed a patent duodenal lumen without any residual stenosis.The patient reported complete resolution of symptoms at the 18-month follow-up.CONCLUSION Endoscopic RIC may be an effective treatment for congenital duodenal webs in adults.

A Radial Basis Function Method with Improved Accuracy for Fourth Order Boundary Value Problems

Accurately approximating higher order derivatives is an inherently difficult problem. It is shown that a random variable shape parameter strategy can improve the accuracy of approximating higher order derivatives with Radial Basis Function methods. The method is used to solve fourth order boundary value problems. The use and location of ghost points are examined in order to enforce the extra boundary conditions that are necessary to make a fourth-order problem well posed. The use of ghost points versus solving an overdetermined linear system via least squares is studied. For a general fourth-order boundary value problem, the recommended approach is to either use one of two novel sets of ghost centers introduced here or else to use a least squares approach. When using either ghost centers or least squares, the random variable shape parameter strategy results in significantly better accuracy than when a constant shape parameter is used.

Isogeometric Boundary Element Analysis for 2D Transient Heat Conduction Problem with Radial Integration Method

This paper presents an isogeometric boundary element method(IGABEM)for transient heat conduction analysis.The Non-Uniform Rational B-spline(NURBS)basis functions,which are used to construct the geometry of the structures,are employed to discretize the physical unknowns in the boundary integral formulations of the governing equations.Bezier extraction technique is employed to accelerate the evaluation of NURBS basis functions.We adopt a radial integration method to address the additional domain integrals.The numerical examples demonstrate the advantage of IGABEM in dimension reduction and the seamless connection between CAD and numerical analysis.

Resolving Domain Integral Issues in Isogeometric Boundary Element Methods via Radial Integration:A Study of Thermoelastic Analysis

The paper applied the isogeometric boundary element method(IGABEM)to thermoelastic problems.The Non-Uniform Rational B-splines(NURBS)used to construct geometric models are employed to discretize the boundary integral formulation of the governing equation.Due to the existence of thermal stress,the domain integral term appears in the boundary integral equation.We resolve this problem by incorporating radial integration method into IGABEM which converts the domain integral to the boundary integral.In this way,IGABEM can maintain its advantages in dimensionality reduction and more importantly,seamless integration of CAD and numerical analysis based on boundary representation.The algorithm is verified by numerical examples.

TRACTIVE PERFORMANCE ANALYSIS ON RADIALLY DEPLOYABLE WHEEL CONFIGURATION OF LUNAR ROVER VEHICLE BY DISCRETE ELEMENT METHOD

With the consideration of volume constraint of launch vehicle and trafficability of rover vehicle on lunar regolith terrain, a new design of radially deployable wheel is presented. For the purpose of achieving the meso-mechanics and dynamical behavior of lunar soil particles as well as macro-parameters of tractive performance for radially deployable wheel, the interaction between two types of wheel configurations and lunar soil particles is analyzed by means of discrete element method. The network of contact forces, the displacement vector chart, and the deformation of lunar soil beneath wheels are plotted. The equations of soil thrust, motion resistance, drawbar pull and driven torque are derived in granular scale based on the coordinates transformation and algebraic summation. The calculated results show that there is sufficient traction for both 6-split and 12-split radially deployable wheels with 304 mm outspread diameter to negotiate lunar regolith terrain specified here; the value of drawbar pull enhances with the increase of split number of radially deployable wheel, however, the required driven torque increases simultaneously, therefore, the tractive efficiency decreases.

An improved local radial point interpolation method for transient heat conduction analysis

The smoothing thin plate spline （STPS） interpolation using the penalty function method according to the optimization theory is presented to deal with transient heat conduction problems. The smooth conditions of the shape functions and derivatives can be satisfied so that the distortions hardly occur. Local weak forms are developed using the weighted residual method locally from the partial differential equations of the transient heat conduction. Here the Heaviside step function is used as the test function in each sub-domain to avoid the need for a domain integral. Essential boundary conditions can be implemented like the finite element method （FEM） as the shape functions possess the Kronecker delta property. The traditional two-point difference method is selected for the time discretization scheme. Three selected numerical examples are presented in this paper to demonstrate the availability and accuracy of the present approach comparing with the traditional thin plate spline （TPS） radial basis functions.

Radial point collocation method (RPCM) for solving convection-diffusion problems

In this paper, Radial point collocation method （RPCM）, a kind of meshfree method, is applied to solve convectiondiffusion problem. The main feature of this approach is to use the interpolation schemes in local supported domains based on radial basis functions. As a result, this method is local and hence the system matrix is banded which is very attractive for practical engineering problems. In the numerical examination, RPCM is applied to solve non-linear convection-diffusion 2D Burgers equations. The results obtained by RPCM demonstrate the accuracy and efficiency of the proposed method for solving transient fluid dynamic problems. A fictitious point scheme is adopted to improve the solution accuracy while Neumann boundary conditions exist. The meshfree feature of the nresent method is verv attractive in solving comnutational fluid nroblems.

Factors affecting accuracy of radial point interpolation meshfree method for 3-D solid mechanics

Recently,the radial point interpolation meshfree method has gained popularity owing to its advantages in large deformation and discontinuity problems,however,the accuracy of this method depends on many factors and their influences are not fully investigated yet.In this work,three main factors,i.e.,the shape parameters,the influence domain size,and the nodal distribution,on the accuracy of the radial point interpolation method(RPIM)are systematically studied and conclusive results are obtained.First,the effect of shape parameters(R,q)of the multi-quadric basis function on the accuracy of RPIM is examined via global search.A new interpolation error index,closely related to the accuracy of RPIM,is proposed.The distribution of various error indexes on the R q plane shows that shape parameters q[1.2,1.8]and R[0,1.5]can give good results for general 3-D analysis.This recommended range of shape parameters is examined by multiple benchmark examples in 3D solid mechanics.Second,through numerical experiments,an average of 30 40 nodes in the influence domain of a Gauss point is recommended for 3-D solid mechanics.Third,it is observed that the distribution of nodes has significant effect on the accuracy of RPIM although it has little effect on the accuracy of interpolation.Nodal distributions with better uniformity give better results.Furthermore,how the influence domain size and nodal distribution affect the selection of shape parameters and how the nodal distribution affects the choice of influence domain size are also discussed.

Mathematical modeling of fractional derivatives for magnetohydrodynamic fluid flow between two parallel plates by the radial basis function method

Investigations into the magnetohydrodynamics of viscous fluids have become more important in recent years,owing to their practical significance and numerous applications in astro-physical and geo-physical phenomena.In this paper,the radial base function was utilized to answer fractional equation associated with fluid flow passing through two parallel flat plates with a magnetic field.The magnetohydrodynamics coupled stress fluid flows between two parallel plates,with the bottom plate being stationary and the top plate moving at a persistent velocity.We compared the radial basis function approach to the numerical method(fourth-order Range-Kutta)in order to verify its validity.The findings demonstrated that the discrepancy between these two techniques is quite negligible,indicating that this method is very reliable.The impact of the magnetic field parameter and Reynolds number on the velocity distribution perpendicular to the fluid flow direction is illustrated.Eventually,the velocity parameter is compared for diverse conditionsα,Reynolds and position(y),the maximum of which occurs atα=0.4.Also,the maximum velocity values occur inα=0.4 and Re=1000 and the concavity of the graph is less forα=0.8.

The Construction Method for Solving Radial Flow Problem through the Homogeneous Reservoir

On the basis of similar structure of solutions of ordinary differential equation (ODE) boundary value problem, the similar construction method was put forward by solving problems of fluid flow in porous media through the homogeneous reservoir. It is indicate that the pressure distribution of dimensionless reservoir and bottom hole in Laplace space, which take on the radial flow, also shows similar structure, and the internal relationship between the above solutions were illustrated in detail.

Calculation methods of lubricant film pressure distribution of radial grooved thrust bearings

In order to calculate the pressure distribution of radial grooved thrust bearing, analytical and numerical methods were applied respectively. Grooved region and land region were linked by u- sing the mass conservations principle at the groove/land boundary in each method. The block-weight approach was implemented to deal with the non-coincidence of mesh and radial groove pattern in nu- merical method. It was observed that the numerical solutions had higher precision as mesh number exceed 70 x 70, and the relaxation iteration of differential scheme presented the fastest convergence speed when relaxation factor was close to 1.94.

SOME PROBLEMS WITH THE METHOD OF FUNDAMENTAL SOLUTION USING RADIAL BASIS FUNCTIONS

The present work describes the application of the method of fundamental solutions （MFS） along with the analog equation method （AEM） and radial basis function （RBF） approximation for solving the 2D isotropic and anisotropic Helmholtz problems with different wave numbers. The AEM is used to convert the original governing equation into the classical Poisson＇s equation, and the MFS and RBF approximations are used to derive the homogeneous and particular solutions, respectively. Finally, the satisfaction of the solution consisting of the homogeneous and particular parts to the related governing equation and boundary conditions can produce a system of linear equations, which can be solved with the singular value decomposition （SVD） technique. In the computation, such crucial factors related to the MFS-RBF as the location of the virtual boundary, the differential and integrating strategies, and the variation of shape parameters in multi-quadric （MQ） are fully analyzed to provide useful reference.

LOCAL DISCONTINUOUS GALERKIN METHOD FOR RADIAL POROUS FLOW WITH DISPERSION AND ADSORPTION

Based on the local discontinuous Galerkin methods for time-dependent convection-diffusion systems newly developed by Corkburn and Shu,according to the form of the generalized convection-diffusion equations which model the radial porous flow with dispersion and adsorption,a local discontinuous Galerkin method for radial porous flow with dispersion and adsorption was developed,a high order accurary new scheme for radial porous flow is obtained.The presented method was applied to the numerical tests of two cases of radial porous,i.e., the convection-dispersion flow and the convection-dispersion-adsorption flow,the corresponding parts of the numerical results are in good agreement with the published solutions,so the presented method is reliable.Reckoning of the computational cost also shows that the method is practicable.

医院中子照射器治疗束中子参数测量

为了对医院中子照射器的设计指标进行验证,利用金箔活化法测量了其治疗束出口处中子注量率,并采用金刚石探测单元的扫描装置测量治疗束出口处热中子、超热中子、快中子和γ射线注量率的径向分布。结果显示,在30 kW满功率运行时,热中子束及超热中子束出口中心处,热中子注量率分别为1.75×10^(9)cm^(-2)·s^(-1)和6.57×10^(7)cm^(-2)·s^(-1),超热中子注量率分别为1.41×10^(7)cm^(-2)·s^(-1)和3.14×10^(8)cm^(-2)·s^(-1);治疗束主要分布在束流孔径内,靠近束流边缘会出现指数级下降现象。该测量结果为医院中子照射器开展后续相关测试及实验提供了参数支持。

极限下限分析的区域光滑径向点插值法

极限分析的高效数值计算方法在结构设计和安全评定中具有非常重要的作用.为了更加有效地求解极限分析问题,将区域光滑径向点插值法与二阶锥规划相结合,提出了理想弹塑性结构极限下限分析的一种新方法.将问题域离散为简单的三角形背景单元,每个单元进一步划分成若干个光滑域.为了将复杂的域积分转化为简单的边界积分,并且避免计算形函数的导数,采用广义梯度光滑技术对每个光滑域进行应变光滑处理.由于径向点插值法构造的形函数满足Kronecker delta性质,本质边界条件可以直接施加.依据下限定理,在满足以等效积分弱形式表达的自平衡应力场平衡条件的基础上,用二阶锥规划成功构建了极限分析下限法的计算模型,从而可方便地通过基于原始-对偶内点法的数学规划求解器MOSEK直接求解该问题.数值算例结果表明,本文所提方法有效地克服了维数障碍问题,具有较高的计算精度,并且计算结果对网格畸变十分不敏感.

径向固结系数计算方法与试验验证研究

基于Terzaghi-Rendulic的轴对称固结理论,提出了一种径向固结系数计算公式,采用GDS固结试验验证该公式的有效性。首先,利用径向固结度和时间因子的关系,推导出径向固结系数的计算公式。然后,采用GDS固结试验系统,开展了不同固结压力下的径向排水固结试验,得到位移~时间曲线。最后,利用提出的公式计算出各级固结压力下的径向固结系数,并将理论解答与试验数据进行了对比。结果表明,提出的计算方法是可行的,能够实现对径向排水固结的试样位移随时间变化关系进行较为准确的预测。

考虑纵径向热应变的竖向受荷能量桩简化分析方法

为探究温度对能量桩荷载传递机理及相关力学响应的影响,引入平面瞬态温度场方程,将温度场与应力场解耦。基于平面应力模型,将能量桩与桩周土考虑为具有协调变形的整体,计算了径向热应力。在此基础上,将其与双曲线荷载传递模型结合,对桩土界面处的极限摩阻力进行修正。将纵向热应变考虑在竖向荷载传递方程中,得到可同时衡量纵向和径向热效应的竖向受荷能量桩承载特性分析方法。利用增量法对能量桩荷载传递控制方程进行求解,得到桩身轴力、桩侧阻力、桩身位移等相关力学响应。通过与既有文献进行对比,验证了该模型的合理性。通过参数分析,研究了温度和竖向力作用下能量桩的荷载传递特性。结果表明:温度会改变能量桩的荷载传递特性,提高能量桩的运行温度可小幅增加其承载力。该文方法的计算流程清晰,可为能量桩的设计提供参考。

分流叶片长度及周向偏移量对ORC向心透平性能的影响

利用分流叶片能有效改善叶片通道内的流动阻塞问题,降低流动损失。针对某带分流叶片的有机朗肯循环(ORC)向心透平,研究了不同分流叶片长度和周向偏移量对透平性能的影响,对不同叶片布置方案进行数值模拟,分析了内部流动状况、叶片载荷和损失分布。结果表明:分流叶片能有效削弱通道中的涡流,改善流动状况,使通道内部的压力分布合理;同时在一定程度上分担了主叶片的载荷。与分流叶片长度系数相比,周向偏移量对熵产率的影响较为明显;随着长度系数和周向偏移量的增加,高熵产率范围和总压损失系数均呈现先减后增的趋势,等熵效率的变化则相反,当l=0.5、d=0.5时等熵效率最大,为91.26%,而功率与叶片长度大体呈正相关;将长度系数和周向偏移量分别控制在0.5~0.6时,能保持较为理想的流动状况及叶片载荷分布,高熵产率范围较小,有利于透平性能的提升。