Investigation of bubbles escape behavior from low basicity mold flux for high-Mn high-Al steels using 3D X-ray microscope

During the continuous casting process of high-Mn high-Al steels,various types of gases such as Ar need to escape through the top of the mold.In which,the behavior of bubbles traversing the liquid slag serves as a restrictive link,closely associated with viscosity and the thickness of liquid slag.In contrast to two-dimensional surface observation,three-dimensional(3D)analysis method can offer a more intuitive,accurate,and comprehensive information.Therefore,this study employs a 3D X-ray microscope(3D-XRM)to obtained spatial distribution and 3D morphological characteristics of residual bubbles in mold flux under different basicity of liquid slag,different temperatures,and different holding times.The results indicate that as basicity of slag increases from 0.52 to 1.03,temperature increases from 1423 to 1573 K,the viscosity of slag decreases,the floating rate of bubbles increases.In addition,when holding time increases from 10 to 30 s,the bubbles floating distance increases,and the volume fraction and average equivalent sphere diameter of the bubbles solidified in the mold flux gradually decreases.In one word,increasing the basicity,temperature,and holding time leading to an increase in the removal rate of bubbles especially for the large.These findings of bubbles escape behavior provide valuable insights into optimizing low basicity mold flux for high-Mn high-Al steels.

A new hybrid method—combined heat flux method with Monte-Carlo method to analyze thermal radiation

A new hybrid method, Monte-Carlo-Heat-Flux （MCHF） method, was presented to analyze the radiative heat transfer of participating medium in a three-dimensional rectangular enclosure using combined the Monte-Carlo method with the heat flux method. Its accuracy and reliability was proved by comparing the computational results with exact results from classical ＂Zone Method＂.

A data assimilation-based forecast model of outer radiation belt electron fluxes

Because radiation belt electrons can pose a potential threat to the safety of satellites orbiting in space,it is of great importance to develop a reliable model that can predict the highly dynamic variations in outer radiation belt electron fluxes.In the present study,we develop a forecast model of radiation belt electron fluxes based on the data assimilation method,in terms of Van Allen Probe measurements combined with three-dimensional radiation belt numerical simulations.Our forecast model can cover the entire outer radiation belt with a high temporal resolution(1 hour)and a spatial resolution of 0.25 L over a wide range of both electron energy(0.1-5.0 MeV)and pitch angle(5°-90°).On the basis of this model,we forecast hourly electron fluxes for the next 1,2,and 3 days during an intense geomagnetic storm and evaluate the corresponding prediction performance.Our model can reasonably predict the stormtime evolution of radiation belt electrons with high prediction efficiency(up to~0.8-1).The best prediction performance is found for~0.3-3 MeV electrons at L=~3.25-4.5,which extends to higher L and lower energies with increasing pitch angle.Our results demonstrate that the forecast model developed can be a powerful tool to predict the spatiotemporal changes in outer radiation belt electron fluxes,and the model has both scientific significance and practical implications.

Carreau fluid flow due to nonlinearly stretching sheet with thermal radiation, heat flux, and variable conductivity

A sophisticated theoretical and mathematical model is proposed.It is verified that this model can estimate and monitor the detailed behavior for the steady Carreau fluid flow past a nonlinear stretching surface and the predicted phenomena due to the presence of heat flux,thermal radiation,and viscous dissipation.Despite the fact that some properties of the fluid do not depend on the temperature,the fluid thermal conductivity is assumed to depend on the temperature.Based on accelerating the fluid elements,some of the kinetic energy for the fluid can be turned to the internal heating energy in the form of viscous dissipation phenomena.The contribution in this study is that a similar solution is obtained,in spite of the high nonlinearity of the Carreau model,especially,with the heat flux,variable conductivity,and viscous dissipation phenomena.Some of the major significant findings of this study can be observed from the reduction in the fluid velocity with enhancing the Weissenberg number.Likewise,the increase in the sheet temperature is noted with increasing the Eckert number while the reverse behavior is observed for increasing both the radiation parameter and the conductivity parameter.Finally,the accuracy and trust in the proposed numerical method are validated after benchmarking for our data onto the earlier results.

Influence of magnetic field and thermal radiation by natural convection past vertical cone subjected to variable surface heat flux

A numerical study is performed to examine the heat transfer characteristics of natural convection past a vertical cone under the combined effects of magnetic field and thermal radiation. The surface of the cone is subjected to a variable surface heat flux. The fluid considered is a gray, absorbing-emitting radiation but a non-scattering medium. With approximate transformations, the boundary layer equations governing the flow are reduced to non-dimensional equations valid in the free convection regime. The dimensionless governing equations are solved by an implicit finite difference method of Crank-Nicolson type which is fast convergent, accurate, and unconditionally stable. Numerical results are obtained and presented for velocity, temperature, local and average wall shear stress, and local and average Nusselt number in air and water. The present results axe compared with the previous published work and are found to be in excellent agreement.

Autophagic flux response and glioblastoma sensitivity to radiation

Objective:Glioblastoma is the most common primary brain tumor in adults and one of the most lethal human tumors.It constitutes a unique non-metastasizing human tumor model with high resistance to radiotherapy and chemotherapy.The current study investigates the association between autophagic flux and glioblastoma cell resistance.Methods:The expression kinetics of autophagy-and lysosome-related proteins following exposure of two glioblastoma cell lines(T98 and U87)to clinically relevant radiation doses was examined.Then,the response of cells resistant to radiotherapy and chemotherapy was investigated after silencing of LC3A,LC3B,and TFEB genes in vitro and in vivo.Results:Following irradiation with 4 Gy,the relatively radioresistant T98 cells exhibited enhanced autophagic flux.The more radiosensitive U87 cell line suffered a blockage of autophagic flux.Silencing of LC3A,LC3B,and TFEB genes in vitro,significantly sensitized cells to radiotherapy and temozolomide(U87:P<0.01 and<0.05,respectively;T98:P<0.01 and<0.01,respectively).Silencing of the LC3A gene sensitized mouse xenografts to radiation.Conclusions:Autophagy in cancer cells may be a key factor of radio-resistance and chemo-resistance in glioblastoma cells.Blocking autophagy may improve the efficacy of radiochemotherapy for glioblastoma patients.

Distribution of radiation flux in focal plane for a parabolic dish solar system

Radiation flux of focal plane plays a very important role of efficiency in a parabolic dish solar system.This paper aims to present the distribution of radiation flux in focal plane for every incident solar irradiation.Monte-Carlo ray-tracing method is applied and coupled with the measuring value of incident solar irradiation in Harbin City hourly.The results show that radiation flux in focal plane remains unchanged for different radius from 0 mm to 15 mm,and gradually decreases for different radius from 15 mm to 20 mm.And the results also show that the influence of incident solar irradiation on radiation flux in focal plane is very great,and the highest radiation flux is 21.8 W/mm2,when incident solar irradiation value is 1100 W/m2.

Radiation energy flux of Dirac field of static spherically symmetric black holes

By the statistical entropy of the Dirac field of the static spherically symmetric black hole, the result is obtained that the radiation energy flux of the black hole is proportional to the quartic of the temperature of its event horizon. That is, the thermal radiation of the black hole always satisfies the generalised Stenfan-Boltzmann law. The derived generalised Stenfan-Boltzmann coefficient is no longer a constant. When the cut-off distance and the thin film thickness are both fixed, it is a proportional coefficient related to the space-time metric near the event horizon and the average radial effusion velocity of the radiation particles from the thin film. Finally, the radiation energy fluxes and the radiation powers of the Schwarzschild black hole and the Reissner-NordstrSm black hole are derived, separately.

The Impact of Soil Moisture Availability upon the Partition of Net Radiation into Sensible and Latent Heat Fluxes

The impact of soil moisture availability on the Bowen ratio and on the partition of net radiation flux into sensible, latent and soil heat fluxes was investigated by using one-dimensional primitive equations with a refined soil parameterization scheme. Simulation results presented that as soil moisture availability increases, the Bowen ratio and the partition of net radiation flux into sensible and soil heat fluxes decrease. The partition of net radiation flux into latent heat flux, however, increases. Quantitative relationships between Bowen ratio and the partitions with soil moisture availability were also given in this study.

Modification of the SUNFLUX Solar Radiation Scheme with a New Aerosol Parameterization and Its Validation Using Observation Network Data

SUNFLUX is a fast parameterization scheme for determination of the solar radiation at the Earth＇s surface. In this paper, SUNFLUX is further modified in the treatment of aerosols. A new aerosol parameterization scheme is developed for five aerosol species. Observational data from Baseline Surface Radiation Network （BSRN）, Surface Radiation Budget Network （SURFRAD） and Aerosol Robotic Network （AERONET） stations are used to evaluate the accuracy of the original and modified SUNFLUX schemes. General meteorological data are available at SURFRAD stations, but not at BSRN stations. Therefore, the total precipitable water content and aerosol data are obtained from AERONET stations. Fourteen stations are selected from both BSRN and AERONET. Cloud fraction data from MODIS are further used to screen the cloud. Ten-year average aerosol mixing ratios simulated by the CAM-chem system are used to calculate the fractions of aerosol optical depth for each aerosol species, and these fractions are further used to convert the observed total aerosol optical depth into the components of individual species for use in the evaluations. The proper treatment of multiple aerosol types in the model is discussed. The evaluation results using SUNFLUX with the new aerosol scheme, in terms of the BSRN dataset, are better than those using the original aerosol scheme under clear-sky conditions. However, the results using the SURFRAD dataset are slightly worse, attributable to the differences in the input water vapor and aerosol optical depth. Sensitivity tests are conducted to investigate the error response of the SUNFLUX scheme to the errors in the input variables.

Estimating Radon Flux and Environmental Radiation Dose from Decommisioning Uranium Mill Tailings and Mining Debris

Based on a case study on uranium mine No.765 of China National Nuclear Corporation (CNNC), the paper briefly describes disposal program and effect of decommissioning uranium mine/mill facilities and quantitatively evaluates radon fluxes and doses to man of gaseous airborne pathway from mill tailings and mining debris before and after decommissioning, including annual individual effective dose to critical groups and annual collective effective dose to the population within 80 km region of the facilities.

Selective internal radiation therapy segmentectomy:A new minimally invasive curative option for primary liver malignancies?

Transarterial radioembolization or selective internal radiation therapy(SIRT)has emerged as a minimally invasive approach for the treatment of tumors.This percutaneous technique involves the local,intra-arterial delivery of radioactive microspheres directly into the tumor.Historically employed as a palliative measure for liver malignancies,SIRT has gained traction over the past decade as a potential curative option,mirroring the increasing role of radiation segmentectomy.The latest update of the BCLC hepatocellular carcinoma guidelines recognizes SIRT as an effective treatment modality comparable to other local ablative methods,particularly well-suited for patients where surgical resection or ablation is not feasible.Radiation segmentectomy is a more selective approach,aiming to deliver high-dose radiation to one to three specific hepatic segments,while minimizing damage to surrounding healthy tissue.Future research efforts in radiation segmentectomy should prioritize optimizing radiation dosimetry and refining the technique for super-selective administration of radiospheres within the designated hepatic segments.

(In) consistency of air/sea heat flux estimates,ocean heat uptake anomalies and top of atmosphere radiation budgets

This paper introduces the consistency between top of atmosphere(TOA) imbalances and ocean heat uptake,and the inconsistency between ocean heat uptake estimates and flux climatologies,and then gives some recommendations and outlook.

Diffusion and reaction mechanism of limestone and quartz in fluxed iron ore pellet roasting process

The increase to the proportion of fluxed pellets in the blast furnace burden is a useful way to reduce the carbon emissions in the ironmaking process.In this study,the interaction between calcium carbonate and iron ore powder and the mineralization mechanism of fluxed iron ore pellet in the roasting process were investigated through diffusion couple experiments.Scanning electron microscopy with energy dispersive spectroscopy was used to study the elements’diffusion and phase transformation during the roasting process.The results indicated that limestone decomposed into calcium oxide,and magnetite was oxidized to hematite at the early stage of preheating.With the increase in roasting temperature,the diffusion rate of Fe and Ca was obviously accelerated,while the diffusion rate of Si was relatively slow.The order of magnitude of interdiffusion coefficient of Fe_(2)O_(3)-CaO diffusion couple was 10^(−10) m^(2)·s^(−1) at a roasting temperature of 1200℃for 9 h.Ca_(2)Fe_(2)O_(5) was the initial product in the Fe_(2)O_(3)-CaO-SiO_(2) diffusion interface,and then Ca_(2)Fe_(2)O_(5) continued to react with Fe_(2)O_(3) to form CaFe_(2)O_(4).With the expansion of the diffusion region,the sillico-ferrite of calcium liquid phase was produced due to the melting of SiO_(2) into CaFe_(2)O_(4),which can strengthen the consolidation of fluxed pellets.Furthermore,andradite would be formed around a small part of quartz particles,which is also conducive to the consolidation of fluxed pellets.In addition,the principle diagram of limestone and quartz diffusion reaction in the process of fluxed pellet roasting was discussed.

FPGA-based position reconstruction method for neutron beam flux spatial distribution measurement in BNCT

A new measurement method for the spatial distribution of neutron beam flux in boron neutron capture therapy(BNCT)is being developed based on the two-dimensional Micromegas detector.To address the issue of long processing times in traditional offline position reconstruction methods,this paper proposes a field programmable gate array based online position reconstruction method utilizing the micro-time projection chamber principle.This method encapsulates key technical aspects:a self-adaptive serial link technique built upon the dynamical adjustment of the delay chain length,fast sorting,a coordinate-matching technique based on the mapping between signal timestamps and random access memory(RAM)addresses,and a precise start point-merging technique utilizing a circular combined RAM.The performance test of the selfadaptive serial link shows that the bit error rate of the link is better than 10-12 at a confidence level of 99%,ensuring reliable data transmission.The experiment utilizing the readout electronics and Micromegas detector shows a spatial resolution of approximately 1.4 mm,surpassing the current method’s resolution level of 5 mm.The beam experiment confirms that the readout electronics system can obtain the flux spatial distribution of neutron beams online,thus validating the feasibility of the position reconstruction method.The online position reconstruction method avoids traditional methods,such as bubble sorting and traversal searching,simplifies the design of the logic firmware,and reduces the time complexity from O(n2)to O(n).This study contributes to the advancement in measuring neutron beam flux for BNCT.

Influence of the Neutron Flux Characteristic Parameters in the Irradiation Channels of Reactor on NAA Results Using k₀-Standardization Method

An approximation method using to estimate the influence of the uncertainties of the neutron flux characteristic parameters in the irradiation positions on the NAA results using k0-standardization technique was presented. Those are the epithermal reactor neutron spectrum shape-factor α, the effective resonace energy Ε for a given nuclide and the thermal to epithermal neutron flux ratio f. The method is applied to estimate the effect of the uncertainties in the determination of α Ε, and f on final NAA results for some irradiation channels of the Dalat reactor. It also shows that presented method is suitable in practical use for the estimation of the errors due to the uncertainty of the neutron flux characteristic parameters at the irradiation position.

Determination of Neutron Fluxes and Spectrum Shaping Factors in Irradiation Sites of Ghana’S Miniature Neutron Source Reactor (mnsr) by Activation Method After Compensation of Loss of Excess Reactivty

Accurate neutron flux values in irradiation channels of research reactors are very essential to their usage. The total neutron flux of the Ghana Research Reactor-1(GHARR-1) was measured after a beryllium reflector was added to its shim to compensate for excess reactivity loss. The thermal, epithermal and fast neutron fluxes were determined by the method of foil activation. The experimental samples with and without a cadmium cover of 1-mm thickness were irradiated in the isotropic neutron field of the irradiation sites of Ghana Research Reactor-1 facility. The induced activities in the sample were measured by gamma ray spectrometry with a high purity germanium detector. The necessary correction for gamma attenuation, thermal neutrons and resonance neutron self-shielding effects were taken into account during the experimental analysis. By defining cadmium cutoff energy of 0.55eV, Al-0.1% Au wires of negligible thickness were irradiated at 3kW to determine the neutron fluxes of two irradiation channels, outer channel 7 and inner channel 2 whose Neutron Shaping Factor (α) were found to be (0.037 ± 0.001) and (–0.961 ± 0.034). The neutron flux ratios at the inner irradiation site 2 were found to be, (25.308 ± 3.201) for thermal to epithermal neutrons flux, (0.179 ± 0.021) for epithermal to fast neutrons flux and (4.528 ± 0.524) for thermal to fast neutrons flux, in the outer irradiation site 7, the neutron flux ratios were found to be, (40.865 ± 3.622) for thermal to epithermal neutrons flux, (0.286 ± 0.025) for epithermal to fast neutrons flux and (11.680 ± 1.030) for thermal to fast neutrons flux.

High-chromium vanadium-titanium magnetite all-pellet integrated burden optimization and softening-melting behavior based on flux pellets

High-chromium vanadium-titanium magnetite(HVTM)is a crucial polymetallic-associated resource to be developed.The allpellet operation is a blast furnace trend that aims to reduce carbon dioxide emissions in the future.By referencing the production data of vanadium-titanium magnetite blast furnaces,this study explored the softening-melting behavior of high-chromium vanadium-titanium magnetite and obtained the optimal integrated burden based on flux pellets.The results show that the burden with a composition of 70wt%flux pellets and 30wt%acid pellets exhibits the best softening-melting properties.In comparison to that of the single burden,the softening-melting characteristic temperature of this burden composition was higher.The melting interval first increased from 307 to 362℃and then decreased to 282℃.The maximum pressure drop(ΔPmax)decreased from 26.76 to 19.01 kPa.The permeability index(S)dropped from 4643.5 to 2446.8 kPa·℃.The softening-melting properties of the integrated burden were apparently improved.The acid pellets played a role in withstanding load during the softening process.The flux pellets in the integrated burden exhibited a higher slag melting point,which increased the melting temperature during the melting process.The slag homogeneity and the TiC produced by over-reduction led to the gas permeability deterioration of the single burden.The segregation of the flux and acid pellets in the HVTM proportion and basicity mainly led to the better softening-melting properties of the integrated burden.

Variation in the surface heat flux on the north and south slopes of Mount Qomolangma

The distinctive conditions present on the north and south slopes of Mount Qomolangma,along with the intricate variations in the underlying surfaces,result in notable variations in the surface energy flux patterns of the two slopes.In this paper,data from TESEBS(Topographical Enhanced Surface Energy Balance System),remote sensing data from eight cloud-free scenarios,and observational data from nine stations are utilized to examine the fluctuations in the surface heat flux on both slopes.The inclusion of MCD43A3 satellite data enhances the surface albedo,contributing to more accurate simulation outcomes.The model results are validated using observational data.The RMSEs of the net radiation,ground heat,sensible heat,and latent heat flux are 40.73,17.09,33.26,and 30.91 W m^(−2),respectively.The net radiation flux is greater on the south slope and exhibits a rapid decline from summer to autumn.Due to the influence of the monsoon,on the north slope,the maximum sensible heat flux occurs in the pre-monsoon period in summer and the maximum latent heat flux occurs during the monsoon.The south slope experiences the highest latent heat flux in summer.The dominant flux on the north slope is sensible heat,while it is latent heat on the south slope.The seasonal variations in the ground heat flux are more pronounced on the south slope than on the north slope.Except in summer,the ground heat flux on the north slope surpasses that on the south slope.

Failure mechanism and infrared radiation characteristic of hard siltstone induced by stratification effect

The deformation in sedimentary rock induced by train loads has potential threat to the safe operation of tunnels. This study investigated the influence of stratification structure on the infrared radiation and temporal damage mechanism of hard siltstone. The uniaxial compression tests, coupled with acoustic emission(AE) and infrared radiation temperature(IRT) were conducted on siltstones with different stratification effects. The results revealed that the stratigraphic structure significantly affects the stress-strain response and strength degradation characteristics. The mechanical parameters exhibit anisotropy characteristics, and the stratification effect exhibits a negative correlation with the cracking stress and peak stress. The failure modes caused by the stratification effect show remarkable anisotropic features, including splitting failure(Ⅰ: 0°-22.50°, Ⅱ: 90°), composite failure(45°), and shearing failure(67.50°). The AE temporal sequences demonstrate a stepwise response characteristic to the loading stress level. The AE intensity indicates that the stress sensitivity of shearing failure and composite failure is generally greater than that of splitting failure. The IRT field has spatiotemporal migration and progressive dissimilation with stress loading and its dissimilation degree increases under higher stress levels. The stronger the stratification effect, the greater the dissimilation degree of the IRT field. The abnormal characteristic points of average infrared radiation temperature(AIRT) variance at local stress drop and peak stress can be used as early and late precursors to identify fracture instability. Theoretical analysis shows that the competitive relationship between compaction strengthening and fracturing damage intensifies the dissimilation of the infrared thermal field for an increasing stress level. The present study provides a theoretical reference for disaster warnings in hard sedimentary rock mass.