The Wulipo landslide, triggered by heavy rainfall on July 10, 2013, transformed into debris flow,resulted in the destruction of 12 houses, 44 deaths, and 117 missing. Our systematic investigation has led to the follow...The Wulipo landslide, triggered by heavy rainfall on July 10, 2013, transformed into debris flow,resulted in the destruction of 12 houses, 44 deaths, and 117 missing. Our systematic investigation has led to the following results and to a new understanding about the formation and evolution process of this hazard. The fundamental factors of the formation of the landslide are a high-steep free surface at the front of the slide mass and the sandstone-mudstone mixed stratum structure of the slope. The inducing factor of the landslide is hydrostatic and hydrodynamic pressure change caused by heavy continuous rainfall. The geological mechanical model of the landslide can be summarized as "instability-translational slide-tension fracture-collapse" and the formation mechanism as "translational landslide induced by heavy rainfall". The total volume of the landslide is 124.6×104 m3, and 16.3% of the sliding mass was dropped down from the cliff and transformed into debris flow during the sliding process, which enlarged 46.7% of the original sliding deposit area. The final accumulation area is found to be 9.2×104 m2. The hazard is a typical example of a disaster chain involving landslide and its induced debris flow. The concealment and disaster chain effect is the main reason for the heavy damage. In future risk assessment, it is suggested to enhance the research onpotential landslide identification for weakly intercalated slopes. By considering the influence of the behaviors of landslide-induced debris flow, the disaster area could be determined more reasonably.展开更多
Debris flow runoff process is one of key parameters for the design of emergency measures and control engineering. The Shenxi gully in Dujiangyan region,located in the meizoseismal areas of Wenchuan earthquake,was sele...Debris flow runoff process is one of key parameters for the design of emergency measures and control engineering. The Shenxi gully in Dujiangyan region,located in the meizoseismal areas of Wenchuan earthquake,was selected as the study area. Based on the research of hazard inducing environment,a soil conservation service( SCS) hydrological model was used to simulate the process of water flow,and then the debris flow runoff process was calculated using the empirical formula combining the results from the SCS hydrological model. Taking the debris flow event occurred on July 9th,2013 as an example,the peak discharges of water flow and debris flow were calculated as 162. 12 and 689. 22 m3/s,with error of 6. 03% compared to the measured values. The debris flow confluence process lasted 1. 8h, which was similar with the actual result. The proposed methodology can be applied to predict the debris flow runoff process in quake-hit areas of the Wenchuan earthquake and is of great importance for debris flow mitigation.展开更多
基金funded by the key project of Sichuan province (Grand No. 2014SZ0163)the National Natural Science Foundation of China (Grant No. 41372301)the Key Deployment Project of Chinese Academy of Sciences (Grant No. KZZD-EW-05-01-02)
文摘The Wulipo landslide, triggered by heavy rainfall on July 10, 2013, transformed into debris flow,resulted in the destruction of 12 houses, 44 deaths, and 117 missing. Our systematic investigation has led to the following results and to a new understanding about the formation and evolution process of this hazard. The fundamental factors of the formation of the landslide are a high-steep free surface at the front of the slide mass and the sandstone-mudstone mixed stratum structure of the slope. The inducing factor of the landslide is hydrostatic and hydrodynamic pressure change caused by heavy continuous rainfall. The geological mechanical model of the landslide can be summarized as "instability-translational slide-tension fracture-collapse" and the formation mechanism as "translational landslide induced by heavy rainfall". The total volume of the landslide is 124.6×104 m3, and 16.3% of the sliding mass was dropped down from the cliff and transformed into debris flow during the sliding process, which enlarged 46.7% of the original sliding deposit area. The final accumulation area is found to be 9.2×104 m2. The hazard is a typical example of a disaster chain involving landslide and its induced debris flow. The concealment and disaster chain effect is the main reason for the heavy damage. In future risk assessment, it is suggested to enhance the research onpotential landslide identification for weakly intercalated slopes. By considering the influence of the behaviors of landslide-induced debris flow, the disaster area could be determined more reasonably.
基金Water Resources Science and Technology Innovation Project of Guangdong Province,China(No.2016-15)National Natural Science Foundation of China(No.41372331)Science and Technology Planning Projects of Guangdong Province,China(Nos.2014A020219006,2014A020219006)
文摘Debris flow runoff process is one of key parameters for the design of emergency measures and control engineering. The Shenxi gully in Dujiangyan region,located in the meizoseismal areas of Wenchuan earthquake,was selected as the study area. Based on the research of hazard inducing environment,a soil conservation service( SCS) hydrological model was used to simulate the process of water flow,and then the debris flow runoff process was calculated using the empirical formula combining the results from the SCS hydrological model. Taking the debris flow event occurred on July 9th,2013 as an example,the peak discharges of water flow and debris flow were calculated as 162. 12 and 689. 22 m3/s,with error of 6. 03% compared to the measured values. The debris flow confluence process lasted 1. 8h, which was similar with the actual result. The proposed methodology can be applied to predict the debris flow runoff process in quake-hit areas of the Wenchuan earthquake and is of great importance for debris flow mitigation.
