To improve performance of receiver, the pilot channel is added to reverse channels of CDMA2000 In this paper, the structure of reverse channels is outlined and the principle of Rake receiver is discussed, then the m...To improve performance of receiver, the pilot channel is added to reverse channels of CDMA2000 In this paper, the structure of reverse channels is outlined and the principle of Rake receiver is discussed, then the model of the Rake receiver is set up and some computer simulations are performed.展开更多
Based on the fact that the variation of tile direction of arrival (DOA) isslower than that of the channel fading, the steering vector of the desired signal is estimatedfirstly using a subspace decomposition method and...Based on the fact that the variation of tile direction of arrival (DOA) isslower than that of the channel fading, the steering vector of the desired signal is estimatedfirstly using a subspace decomposition method and then a constrained condition is configured.Traffic signals are further employed to estimate the channel vector based on the constrained leastsquares criterion. We use the iterative least squares with projection (ILSP) algorithm initializedby the pilot to get the estimation. The accuracy of channel estimation and symbol detection can beprogressively increased through the iteration procedure of the ILSP algorithm. Simulation resultsdemonstrate that the proposed algorithm improves the system performance effectively compared withthe conventional 2-D RAKE receiver.展开更多
A class of the hybrid chaotic sequences is presented. The generator of the sequences is given and realized by the digital method. The hybrid chaotic sequences exhibit good random properties that are very important for...A class of the hybrid chaotic sequences is presented. The generator of the sequences is given and realized by the digital method. The hybrid chaotic sequences exhibit good random properties that are very important for the performance of QS-CDMA system with RAKE receiver. The performance of the system is analyzed when the hybrid chaotic sequences are used as spreading codes in a QS-CDMA system with RAKE receiver and compared with those obtained for m-se-quences and logistic sequences. The results show that the hybrid chaotic sequences are a class of very promising spreading codes for QS-CDMA system.展开更多
In wireless Code Division Multiple Access (CDMA) system, the use of power control is indispensable to combat near-far and fading problems. Signals transmitted over a multipath propagation channel which exhibits inter-...In wireless Code Division Multiple Access (CDMA) system, the use of power control is indispensable to combat near-far and fading problems. Signals transmitted over a multipath propagation channel which exhibits inter-path interference and fading. The receiver has to employ measures to mitigate these effects or it will incur severe performance degradation. A classic approach in CDMA communications is the rake receiver. In this paper, the downlink performance is estimated for a CDMA mobile system at the vertex of multiple adjacent cells. At the base station the received signal is coherently dispread and demodulated using a rake receiver. The effects of power control, error correction and rake receiver were also investigated on the assumption that the received signals undergo Rayleigh fading, lognormal shadowing, and frequency selective fading. The evaluation of performance measures of base to mobile link (downlink) of a multiple-cell CDMA mobile system is presented. This study demonstrates that significant performance improvements are achievable with combined use of power control, rake receiver and error correction scheme.展开更多
A modified RAKE receiver based on novel Recursive Least Squares (RLS) adaptive algorithm is proposed. The receiver uses L-fingered correlators, which are composed of RLS adaptive filters, to enhance the performance ...A modified RAKE receiver based on novel Recursive Least Squares (RLS) adaptive algorithm is proposed. The receiver uses L-fingered correlators, which are composed of RLS adaptive filters, to enhance the performance of multipath receiving. It can also track the amplitude of the received signal to form a real-time amplitude estimation which is correlated with the power of excess delay bin. The simulation results based on the IEEE UltraWide Band (UWB) channel models (CMI to CM4) show that the novel RLS algorithm can alter the attenuation estimation with the finger's power delay profile, and RAKE receiver with few fingers can be employed to get high performance.展开更多
In CDMA communication systems, all the subscribers share the common channel. The limitation factor on the system’s capacity is not the bandwidth, but multiuser interference and the near far problem. This paper models...In CDMA communication systems, all the subscribers share the common channel. The limitation factor on the system’s capacity is not the bandwidth, but multiuser interference and the near far problem. This paper models CDMA system from the perspective of mobile radio channels corrupted by additive white noise generated by multipath and multiple access interferences. The system’s receiver is assisted using different combining diversity techniques. Performance analysis of the system with these detection techniques is presented. The paper demonstrates that combining diversity techniques in the system’s receivers markedly improve the performance of CDMA systems.展开更多
A new adaptive RAKE receiver is proposed which uses pilot sig-nal for channel estimation in CDMA down link communications. The configuration of the system is presented and the performance is also evaluated forboth ada...A new adaptive RAKE receiver is proposed which uses pilot sig-nal for channel estimation in CDMA down link communications. The configuration of the system is presented and the performance is also evaluated forboth adaptive RAKE receiver and the non-adapti展开更多
The conventional 2D Rake receivers for code division multiple access (CDMA) system over frequency selective fading channels are generally based on the second order statistics while assuming perfect array condition...The conventional 2D Rake receivers for code division multiple access (CDMA) system over frequency selective fading channels are generally based on the second order statistics while assuming perfect array conditions. However, the sensor response, location uncertainty, and the use of sample statistics can severely degrade the performance of second order statistics processing. And in practical application, it is impossible to calibrate the array frequently. In this paper a cumulant based 2D Rake receiver for synchronous CDMA system with decorrelator is presented. Decorrelating is a multi user detection approach that not only provides a fundamental solution to the mutual interference problem in CDMA communications but also makes it convenient for the decoupled signal to be processed spatially and temporally. High order signal processing has some inherent advantages over that of second order. Employing second order statistics it is impossible to estimate source steering vector blindly, while employing higher than second order cumulants, this purpose can be achieved. The performance analysis shows that employing cumulant based signal processing technique the proposed 2D Rake receiver is blind and demonstrates excellent performance.展开更多
文摘To improve performance of receiver, the pilot channel is added to reverse channels of CDMA2000 In this paper, the structure of reverse channels is outlined and the principle of Rake receiver is discussed, then the model of the Rake receiver is set up and some computer simulations are performed.
基金The National Hi-Tech Development Plan (863-317-03-01-02-04-20).
文摘Based on the fact that the variation of tile direction of arrival (DOA) isslower than that of the channel fading, the steering vector of the desired signal is estimatedfirstly using a subspace decomposition method and then a constrained condition is configured.Traffic signals are further employed to estimate the channel vector based on the constrained leastsquares criterion. We use the iterative least squares with projection (ILSP) algorithm initializedby the pilot to get the estimation. The accuracy of channel estimation and symbol detection can beprogressively increased through the iteration procedure of the ILSP algorithm. Simulation resultsdemonstrate that the proposed algorithm improves the system performance effectively compared withthe conventional 2-D RAKE receiver.
基金This project was supported by the National Defense Key Laboratory Foundation (99JS04.8.1. DZ02 24).
文摘A class of the hybrid chaotic sequences is presented. The generator of the sequences is given and realized by the digital method. The hybrid chaotic sequences exhibit good random properties that are very important for the performance of QS-CDMA system with RAKE receiver. The performance of the system is analyzed when the hybrid chaotic sequences are used as spreading codes in a QS-CDMA system with RAKE receiver and compared with those obtained for m-se-quences and logistic sequences. The results show that the hybrid chaotic sequences are a class of very promising spreading codes for QS-CDMA system.
文摘In wireless Code Division Multiple Access (CDMA) system, the use of power control is indispensable to combat near-far and fading problems. Signals transmitted over a multipath propagation channel which exhibits inter-path interference and fading. The receiver has to employ measures to mitigate these effects or it will incur severe performance degradation. A classic approach in CDMA communications is the rake receiver. In this paper, the downlink performance is estimated for a CDMA mobile system at the vertex of multiple adjacent cells. At the base station the received signal is coherently dispread and demodulated using a rake receiver. The effects of power control, error correction and rake receiver were also investigated on the assumption that the received signals undergo Rayleigh fading, lognormal shadowing, and frequency selective fading. The evaluation of performance measures of base to mobile link (downlink) of a multiple-cell CDMA mobile system is presented. This study demonstrates that significant performance improvements are achievable with combined use of power control, rake receiver and error correction scheme.
基金Supported by the Chinese 863 National High Technology Program (No.2002AA783043)the National Natural Science Foundation of China (No.60390540).
文摘A modified RAKE receiver based on novel Recursive Least Squares (RLS) adaptive algorithm is proposed. The receiver uses L-fingered correlators, which are composed of RLS adaptive filters, to enhance the performance of multipath receiving. It can also track the amplitude of the received signal to form a real-time amplitude estimation which is correlated with the power of excess delay bin. The simulation results based on the IEEE UltraWide Band (UWB) channel models (CMI to CM4) show that the novel RLS algorithm can alter the attenuation estimation with the finger's power delay profile, and RAKE receiver with few fingers can be employed to get high performance.
文摘In CDMA communication systems, all the subscribers share the common channel. The limitation factor on the system’s capacity is not the bandwidth, but multiuser interference and the near far problem. This paper models CDMA system from the perspective of mobile radio channels corrupted by additive white noise generated by multipath and multiple access interferences. The system’s receiver is assisted using different combining diversity techniques. Performance analysis of the system with these detection techniques is presented. The paper demonstrates that combining diversity techniques in the system’s receivers markedly improve the performance of CDMA systems.
文摘A new adaptive RAKE receiver is proposed which uses pilot sig-nal for channel estimation in CDMA down link communications. The configuration of the system is presented and the performance is also evaluated forboth adaptive RAKE receiver and the non-adapti
文摘The conventional 2D Rake receivers for code division multiple access (CDMA) system over frequency selective fading channels are generally based on the second order statistics while assuming perfect array conditions. However, the sensor response, location uncertainty, and the use of sample statistics can severely degrade the performance of second order statistics processing. And in practical application, it is impossible to calibrate the array frequently. In this paper a cumulant based 2D Rake receiver for synchronous CDMA system with decorrelator is presented. Decorrelating is a multi user detection approach that not only provides a fundamental solution to the mutual interference problem in CDMA communications but also makes it convenient for the decoupled signal to be processed spatially and temporally. High order signal processing has some inherent advantages over that of second order. Employing second order statistics it is impossible to estimate source steering vector blindly, while employing higher than second order cumulants, this purpose can be achieved. The performance analysis shows that employing cumulant based signal processing technique the proposed 2D Rake receiver is blind and demonstrates excellent performance.