以硝酸镍为镍源、酸/碱性硅溶胶为硅源,采用共沉淀法制备了2种Ni/SiO_(2)催化剂。采用固定床反应器,评价Ni/SiO_(2)催化剂对于2-甲基呋喃(2-MF)气相加氢合成2-甲基四氢呋喃(2-MTHF)的反应性能。通过XRD、N_(2)等温吸附-脱附、H_(2)-TPR...以硝酸镍为镍源、酸/碱性硅溶胶为硅源,采用共沉淀法制备了2种Ni/SiO_(2)催化剂。采用固定床反应器,评价Ni/SiO_(2)催化剂对于2-甲基呋喃(2-MF)气相加氢合成2-甲基四氢呋喃(2-MTHF)的反应性能。通过XRD、N_(2)等温吸附-脱附、H_(2)-TPR、NH3-TPD、XPS、FTIR和TEM对催化剂进行了表征。考察了硅溶胶的酸碱性对Ni/SiO_(2)催化剂结构及性能的影响。结果表明,以酸性硅溶胶为硅源制备的Ni/SiO_(2)催化剂以弱酸中心酸量为主且存在中强酸中心,比表面积、平均孔径大,因而该催化剂加氢活性和2-MTHF的选择性较高。Ni/SiO_(2)催化剂稳定性良好,在最优反应条件〔温度90℃、H_(2)压力2 MPa、质量空速4.4 g 2-MF/(g催化剂·h)、H_(2)与2-MF物质的量之比为4∶1〕下进行催化剂稳定性测试(200 h),2-MF的转化率达到99.8%,2-MTHF的选择性均保持在97.5%左右。展开更多
Transformation of lignin to valuable chemicals via sustainable pathways is recognized as one of the most efficient ways to explore its value and replace the nonrenewable petroleum resource. In this work, an environmen...Transformation of lignin to valuable chemicals via sustainable pathways is recognized as one of the most efficient ways to explore its value and replace the nonrenewable petroleum resource. In this work, an environmental-friendly transfer hydrogenation process has been developed to convert lignin derived2,6-dimethoxybenzoquinone to 1,4-cyclohexanediol. Compared with previous work under hydrogen pressure(30 bar), this process uses isopropanol as both solvent and hydrogen donor, which significantly simply the operation process. The core of this study is the design and preparation of Mn modified Raney Ni catalysts by ball milling process. A series of Raney Ni Mn catalysts with different ball milling time and Mn content were prepared and investigated. Characterizations by X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS), scanning electron microscope(SEM) and transmission electron microscope(TEM) etc. showed that Ni Mn Al alloy was formed during the ball milling process and then transformed to Ni Mn alloy after treatment by aqueous Na OH. After optimization, a yield as high as 86.1% could be achieved for 1,4-cyclohexanediol at 200℃ in only 1 h.展开更多
文摘以硝酸镍为镍源、酸/碱性硅溶胶为硅源,采用共沉淀法制备了2种Ni/SiO_(2)催化剂。采用固定床反应器,评价Ni/SiO_(2)催化剂对于2-甲基呋喃(2-MF)气相加氢合成2-甲基四氢呋喃(2-MTHF)的反应性能。通过XRD、N_(2)等温吸附-脱附、H_(2)-TPR、NH3-TPD、XPS、FTIR和TEM对催化剂进行了表征。考察了硅溶胶的酸碱性对Ni/SiO_(2)催化剂结构及性能的影响。结果表明,以酸性硅溶胶为硅源制备的Ni/SiO_(2)催化剂以弱酸中心酸量为主且存在中强酸中心,比表面积、平均孔径大,因而该催化剂加氢活性和2-MTHF的选择性较高。Ni/SiO_(2)催化剂稳定性良好,在最优反应条件〔温度90℃、H_(2)压力2 MPa、质量空速4.4 g 2-MF/(g催化剂·h)、H_(2)与2-MF物质的量之比为4∶1〕下进行催化剂稳定性测试(200 h),2-MF的转化率达到99.8%,2-MTHF的选择性均保持在97.5%左右。
基金supported by the Fundamental Research Funds for the Central Universities (BLX202132)the Foreign expert program (G2022109001L)+1 种基金the Beijing Forestry University Outstanding Young Talent Cultivation Project (2019JQ03005)the Young Tip-top Talent Project of Science and Technology Innovation by National Forestry and Grassland Administration of China(2019132609)。
文摘Transformation of lignin to valuable chemicals via sustainable pathways is recognized as one of the most efficient ways to explore its value and replace the nonrenewable petroleum resource. In this work, an environmental-friendly transfer hydrogenation process has been developed to convert lignin derived2,6-dimethoxybenzoquinone to 1,4-cyclohexanediol. Compared with previous work under hydrogen pressure(30 bar), this process uses isopropanol as both solvent and hydrogen donor, which significantly simply the operation process. The core of this study is the design and preparation of Mn modified Raney Ni catalysts by ball milling process. A series of Raney Ni Mn catalysts with different ball milling time and Mn content were prepared and investigated. Characterizations by X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS), scanning electron microscope(SEM) and transmission electron microscope(TEM) etc. showed that Ni Mn Al alloy was formed during the ball milling process and then transformed to Ni Mn alloy after treatment by aqueous Na OH. After optimization, a yield as high as 86.1% could be achieved for 1,4-cyclohexanediol at 200℃ in only 1 h.