The catalytic hydrogenation of 2-nitro-4-acetylamino anisole(NMA)is a less-polluting and efficient method to produce 2-amino-4-acetamino anisole(AMA).However,the kinetics of catalytic hydrogenation of NMA to AMA remai...The catalytic hydrogenation of 2-nitro-4-acetylamino anisole(NMA)is a less-polluting and efficient method to produce 2-amino-4-acetamino anisole(AMA).However,the kinetics of catalytic hydrogenation of NMA to AMA remains obscure.In this work,the kinetic models including power-law model and Langmuir-Hinshelwood-Hougen-Watson(LHHW)model of NMA hydrogenation to AMA catalyzed by Raney nickel catalyst were investigated.All experiments were carried out under the elimination of mass transfer resistance within the temperature range of 70–100°C and the hydrogen pressure of 0.8–1.5 MPa.The reaction was found to follow 0.52-order kinetics with respect to the NMA concentration and 1.10-order kinetics in terms of hydrogen pressure.Based on the LHHW model,the dual-site dissociation adsorption of hydrogen was analyzed to be the rate determining step.The research of intrinsic kinetics of NMA to AMA provides the guidance for the reactor design and inspires the catalyst modification.展开更多
The direct reductive amination of 2,5-diformylfuran (DFF) with ammonia to 2,5-bis(aminomethyl)furan (BAF) was demonstrated, for the first time, over the commercial type Nickel-Raney and acid treated Nickel-Raney catal...The direct reductive amination of 2,5-diformylfuran (DFF) with ammonia to 2,5-bis(aminomethyl)furan (BAF) was demonstrated, for the first time, over the commercial type Nickel-Raney and acid treated Nickel-Raney catalysts. The effects of reaction parameters such as reaction medium, temperature and hydrogen pressure were described. The acid treated Nickel-Raney catalyst exhibited the highest BAF yield in the THF-water mixed reaction medium. The relatively higher Ni0 species composition and larger surface area of the acid treated Nickel-Raney catalyst with specific reaction conditions contributed greatly to the BAF formation. The oligomeric species, such as furanic imine trimers and tetramers confirmed by MALDI-MS analysis were presented as the intermediates of DFF reductive amination.展开更多
Hydrogenation of carbazole and N-ethylcarbazole over Raney-Ni catalyst were realized in the temperature range of 393-503 K. 4[H] adduct dominated the hydrogenation products and the formation of 2[H] adduct was the rat...Hydrogenation of carbazole and N-ethylcarbazole over Raney-Ni catalyst were realized in the temperature range of 393-503 K. 4[H] adduct dominated the hydrogenation products and the formation of 2[H] adduct was the rate-limiting step during the period, in which the conversion of carbazole was less than 40%. The hydrogenation process followed pseudo-first-order kinetics and the hydrogenation activation energies of carbazole and N-ethylcarbazole were 90 kJ/mol and 115 kJ/mol, respectively. The reaction starting position as well as the pathway of the hydrogenation of （N-ethyl）carbazole were investigated by comparing the kinetic characteristics of hydrogen uptake of carbazole and N- ethylcarbazole. The results showed that the reaction was a stepwise hydrogenation process and the first H_2 was added to the C1 = C10 double bond in the hydrogenation.展开更多
The Ni Al alloy containing Cr, Fe additives were prepared as Raney Ni catalyst by high energy milling. The size and surface state of Ni Al alloy powder were studied by particle size analyzer and sanning electron micro...The Ni Al alloy containing Cr, Fe additives were prepared as Raney Ni catalyst by high energy milling. The size and surface state of Ni Al alloy powder were studied by particle size analyzer and sanning electron microscopy, the structure was analyzed by XRD and Mssbauer methods. The results showed that after a high energy milling (HEM), the Ni Al alloy transforms to a nano scale NiAl structure with rich Al. By annealing the alloy, a metastable Ni 2Al 3 phase can be obtained.展开更多
[Objective]The research aimed to study rapid dechlodnation kinetics of 1,4-dichlorobenzene （1,4-DCB） by microwave-assisted Raney Ni -AI alloy catalyst. [ Method] Microwave-assisted Raney Ni -AI alloy catalyst was us...[Objective]The research aimed to study rapid dechlodnation kinetics of 1,4-dichlorobenzene （1,4-DCB） by microwave-assisted Raney Ni -AI alloy catalyst. [ Method] Microwave-assisted Raney Ni -AI alloy catalyst was used for dechlorination of chlorobenzene （CB） and 1,4-DCB to analyze dechlorination kinetics of 1,4-DCB. [ Result] Reductive dechlorination reaction of 1,4-DCB by microwave-assisted Raney Ni- AI alloy catalyst was in accordance of the two-order reaction kinetics. Reaction rate constants of 1,4-DCB dechlorination at 35 and 50 ℃ were 0.037 6 and 0.151 mol/（ L . min）, and the activation energy was 76.66 kJ/mol. By microwave-assisted Raney Ni - AI alloy catalyst, dechlorination rate of 1,4- DCB reached 90% at 10 rain and 35 ℃. Moreover, two chlorine atoms were removed simultaneously, reaching the target of efficient dechlorination. [ Condusion] Oechlodnation of polychlodnated organic compounds by microwave-assisted Raney Ni- AI alloy catalyst obtained good effect .展开更多
In order to improve the catalytic performance of the nitrobenzene hydrogenation rearrangement to prepare p-aminophenol,a bimetallic Pt-Ni/C(PNC)catalyst was synthesized.Taking advantage of the synergistic effect of Ni...In order to improve the catalytic performance of the nitrobenzene hydrogenation rearrangement to prepare p-aminophenol,a bimetallic Pt-Ni/C(PNC)catalyst was synthesized.Taking advantage of the synergistic effect of Ni and Pt to enhance product selectivity and catalytic performance stability,the electrons in Ni are moved to Pt by the electron effect,which affects the catalyst’s ability to activate H_(2)as well as the amount of hydrogen activated.Furthermore,due to the strong Pt(5d)-Ni(3d)coupling effect,Ni can effectively maintain Pt stability in the acidic system and reduce Pt dissolution.The stability of the PNC can be found to be greatly enhanced compared to the Pt/C(PC)catalyst,and p-aminophenol selectivity is greatly enhanced,showing excellent catalytic performance.展开更多
基金the National Natural Science Foun-dation of China(22022802 and 22288102).
文摘The catalytic hydrogenation of 2-nitro-4-acetylamino anisole(NMA)is a less-polluting and efficient method to produce 2-amino-4-acetamino anisole(AMA).However,the kinetics of catalytic hydrogenation of NMA to AMA remains obscure.In this work,the kinetic models including power-law model and Langmuir-Hinshelwood-Hougen-Watson(LHHW)model of NMA hydrogenation to AMA catalyzed by Raney nickel catalyst were investigated.All experiments were carried out under the elimination of mass transfer resistance within the temperature range of 70–100°C and the hydrogen pressure of 0.8–1.5 MPa.The reaction was found to follow 0.52-order kinetics with respect to the NMA concentration and 1.10-order kinetics in terms of hydrogen pressure.Based on the LHHW model,the dual-site dissociation adsorption of hydrogen was analyzed to be the rate determining step.The research of intrinsic kinetics of NMA to AMA provides the guidance for the reactor design and inspires the catalyst modification.
文摘在Ni-Al合金粉上浸渍硝酸铜溶液,经不同温度焙烧得到Cu改性Ni-Al合金粉,采用质量分数10%NaOH溶液浸渍上述改性合金粉得Cu/Raney-Ni催化剂。采用EDX、XRD、N 2吸附-脱附、TEM和NH 3-TPD等手段表征了Ni-Al合金粉及相应Raney-Ni催化剂的元素含量、晶体结构、孔结构特征、表面形貌和表面酸碱性,并以1,4-丁烯二醇加氢制1,4-丁二醇为探针反应,考察了焙烧温度对Raney-Ni催化剂加氢性能的影响。表征分析表明,焙烧温度500℃所制备的CRT500催化剂比表面积较大,为64.96 m 2/g;弱酸中心比例较高,达81.2%。结果表明,焙烧温度升高,BED可实现完全转化,BDO选择性和收率均先升高后降低。其中,CRT500加氢性能较好,BED转化率为100.00%,BDO选择性为61.88%。进一步升高焙烧温度,催化剂RCT550和RCT600的BDO选择性和收率反而降低,这是由于高温下催化剂易发生团聚或烧结。结合催化剂表征可知,CRT500具有较好的加氢性能,这与该催化剂具有合适的Ni/Al物质的量比(3.84)、弱酸中心所占比例较大和活性组分Ni分散性好等因素有较大关联。
文摘The direct reductive amination of 2,5-diformylfuran (DFF) with ammonia to 2,5-bis(aminomethyl)furan (BAF) was demonstrated, for the first time, over the commercial type Nickel-Raney and acid treated Nickel-Raney catalysts. The effects of reaction parameters such as reaction medium, temperature and hydrogen pressure were described. The acid treated Nickel-Raney catalyst exhibited the highest BAF yield in the THF-water mixed reaction medium. The relatively higher Ni0 species composition and larger surface area of the acid treated Nickel-Raney catalyst with specific reaction conditions contributed greatly to the BAF formation. The oligomeric species, such as furanic imine trimers and tetramers confirmed by MALDI-MS analysis were presented as the intermediates of DFF reductive amination.
基金supported by the National Natural Science Foundation of China(U1162127,U1462201,21076189,21476202 and 21276231)
文摘Hydrogenation of carbazole and N-ethylcarbazole over Raney-Ni catalyst were realized in the temperature range of 393-503 K. 4[H] adduct dominated the hydrogenation products and the formation of 2[H] adduct was the rate-limiting step during the period, in which the conversion of carbazole was less than 40%. The hydrogenation process followed pseudo-first-order kinetics and the hydrogenation activation energies of carbazole and N-ethylcarbazole were 90 kJ/mol and 115 kJ/mol, respectively. The reaction starting position as well as the pathway of the hydrogenation of （N-ethyl）carbazole were investigated by comparing the kinetic characteristics of hydrogen uptake of carbazole and N- ethylcarbazole. The results showed that the reaction was a stepwise hydrogenation process and the first H_2 was added to the C1 = C10 double bond in the hydrogenation.
文摘The Ni Al alloy containing Cr, Fe additives were prepared as Raney Ni catalyst by high energy milling. The size and surface state of Ni Al alloy powder were studied by particle size analyzer and sanning electron microscopy, the structure was analyzed by XRD and Mssbauer methods. The results showed that after a high energy milling (HEM), the Ni Al alloy transforms to a nano scale NiAl structure with rich Al. By annealing the alloy, a metastable Ni 2Al 3 phase can be obtained.
文摘[Objective]The research aimed to study rapid dechlodnation kinetics of 1,4-dichlorobenzene （1,4-DCB） by microwave-assisted Raney Ni -AI alloy catalyst. [ Method] Microwave-assisted Raney Ni -AI alloy catalyst was used for dechlorination of chlorobenzene （CB） and 1,4-DCB to analyze dechlorination kinetics of 1,4-DCB. [ Result] Reductive dechlorination reaction of 1,4-DCB by microwave-assisted Raney Ni- AI alloy catalyst was in accordance of the two-order reaction kinetics. Reaction rate constants of 1,4-DCB dechlorination at 35 and 50 ℃ were 0.037 6 and 0.151 mol/（ L . min）, and the activation energy was 76.66 kJ/mol. By microwave-assisted Raney Ni - AI alloy catalyst, dechlorination rate of 1,4- DCB reached 90% at 10 rain and 35 ℃. Moreover, two chlorine atoms were removed simultaneously, reaching the target of efficient dechlorination. [ Condusion] Oechlodnation of polychlodnated organic compounds by microwave-assisted Raney Ni- AI alloy catalyst obtained good effect .
基金funded by the National Natural Science Foundation of China(U20A20119,22078292 and 22008212)。
文摘In order to improve the catalytic performance of the nitrobenzene hydrogenation rearrangement to prepare p-aminophenol,a bimetallic Pt-Ni/C(PNC)catalyst was synthesized.Taking advantage of the synergistic effect of Ni and Pt to enhance product selectivity and catalytic performance stability,the electrons in Ni are moved to Pt by the electron effect,which affects the catalyst’s ability to activate H_(2)as well as the amount of hydrogen activated.Furthermore,due to the strong Pt(5d)-Ni(3d)coupling effect,Ni can effectively maintain Pt stability in the acidic system and reduce Pt dissolution.The stability of the PNC can be found to be greatly enhanced compared to the Pt/C(PC)catalyst,and p-aminophenol selectivity is greatly enhanced,showing excellent catalytic performance.
