Transformation of lignin to valuable chemicals via sustainable pathways is recognized as one of the most efficient ways to explore its value and replace the nonrenewable petroleum resource. In this work, an environmen...Transformation of lignin to valuable chemicals via sustainable pathways is recognized as one of the most efficient ways to explore its value and replace the nonrenewable petroleum resource. In this work, an environmental-friendly transfer hydrogenation process has been developed to convert lignin derived2,6-dimethoxybenzoquinone to 1,4-cyclohexanediol. Compared with previous work under hydrogen pressure(30 bar), this process uses isopropanol as both solvent and hydrogen donor, which significantly simply the operation process. The core of this study is the design and preparation of Mn modified Raney Ni catalysts by ball milling process. A series of Raney Ni Mn catalysts with different ball milling time and Mn content were prepared and investigated. Characterizations by X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS), scanning electron microscope(SEM) and transmission electron microscope(TEM) etc. showed that Ni Mn Al alloy was formed during the ball milling process and then transformed to Ni Mn alloy after treatment by aqueous Na OH. After optimization, a yield as high as 86.1% could be achieved for 1,4-cyclohexanediol at 200℃ in only 1 h.展开更多
Ni-based porous electrocatalysts have been widely used in the hydrogen evolution reaction(HER)in alkaline water electrolysis,and the catalysts are produced by selective leaching of Al from Ni-Al alloys.It is well know...Ni-based porous electrocatalysts have been widely used in the hydrogen evolution reaction(HER)in alkaline water electrolysis,and the catalysts are produced by selective leaching of Al from Ni-Al alloys.It is well known that chemical leaching of Ni-Al intermetallic compound(IMC)generates a high surface area in Ni(OH)_(2).However,the Ni(OH)_(2) produced by leaching the Ni-Al intermetallic compound retards the hydrogen evolution reaction,which is attributed to its weak hydrogen adsorption energy.In this study,we controlled the chemical state of Ni using plasma vapor deposition(PVD)followed by heat treatment,selective Al leaching,and electrochemical reduction.X-ray diffraction(XRD),scanning microscopy(SEM),transmission electron microscopy(TEM),and energy-dispersive X-ray spectroscopy(EDS)were used to confirm the phase evolution of the electrocatalysts during fabrication.We reveal that the heat-treated Ni-Al alloy with a thick Ni2Al3surface layer underwent selective Al leaching and produced biphasic interfaces comprising Ni(OH)_(2) and NiAl IMCs at the edges of the grains in the outermost surface layer.Coupled oxidation of the interfacing NiAl IMCs facilitated the partial reduction of Ni(OH)_(2) to Ni(OH)_(2)/Ni in the grains during electrochemical reduction,as confirmed by X-ray photoelectron spectroscopy(XPS).An electrocatalyst containing partially reduced Ni(OH)_(2)/Ni exhibited an overpotential of 54 mV at 10 mA/cm^(2) in a half-cell measurement,and a cell voltage of 1.675 V at 0.4 A/cm2for single-cell operation.A combined experimental and theoretical study(density functional theory calculations)revealed that the superior HER activity was attributed to the presence of partially reduced metallic Ni with various defects and residual Al,which facilitated water adsorption,dissociation,and finally hydrogen evolution.展开更多
A new combinatorial interpretation of Raney numbers is proposed. We apply this combinatorial interpretation to solve several tree enumeration counting problems. Further a generalized Catalan triangle is introduced and...A new combinatorial interpretation of Raney numbers is proposed. We apply this combinatorial interpretation to solve several tree enumeration counting problems. Further a generalized Catalan triangle is introduced and some of its properties are proved.展开更多
The catalytic hydrogenation of 2-nitro-4-acetylamino anisole(NMA)is a less-polluting and efficient method to produce 2-amino-4-acetamino anisole(AMA).However,the kinetics of catalytic hydrogenation of NMA to AMA remai...The catalytic hydrogenation of 2-nitro-4-acetylamino anisole(NMA)is a less-polluting and efficient method to produce 2-amino-4-acetamino anisole(AMA).However,the kinetics of catalytic hydrogenation of NMA to AMA remains obscure.In this work,the kinetic models including power-law model and Langmuir-Hinshelwood-Hougen-Watson(LHHW)model of NMA hydrogenation to AMA catalyzed by Raney nickel catalyst were investigated.All experiments were carried out under the elimination of mass transfer resistance within the temperature range of 70–100°C and the hydrogen pressure of 0.8–1.5 MPa.The reaction was found to follow 0.52-order kinetics with respect to the NMA concentration and 1.10-order kinetics in terms of hydrogen pressure.Based on the LHHW model,the dual-site dissociation adsorption of hydrogen was analyzed to be the rate determining step.The research of intrinsic kinetics of NMA to AMA provides the guidance for the reactor design and inspires the catalyst modification.展开更多
基金supported by the Fundamental Research Funds for the Central Universities (BLX202132)the Foreign expert program (G2022109001L)+1 种基金the Beijing Forestry University Outstanding Young Talent Cultivation Project (2019JQ03005)the Young Tip-top Talent Project of Science and Technology Innovation by National Forestry and Grassland Administration of China(2019132609)。
文摘Transformation of lignin to valuable chemicals via sustainable pathways is recognized as one of the most efficient ways to explore its value and replace the nonrenewable petroleum resource. In this work, an environmental-friendly transfer hydrogenation process has been developed to convert lignin derived2,6-dimethoxybenzoquinone to 1,4-cyclohexanediol. Compared with previous work under hydrogen pressure(30 bar), this process uses isopropanol as both solvent and hydrogen donor, which significantly simply the operation process. The core of this study is the design and preparation of Mn modified Raney Ni catalysts by ball milling process. A series of Raney Ni Mn catalysts with different ball milling time and Mn content were prepared and investigated. Characterizations by X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS), scanning electron microscope(SEM) and transmission electron microscope(TEM) etc. showed that Ni Mn Al alloy was formed during the ball milling process and then transformed to Ni Mn alloy after treatment by aqueous Na OH. After optimization, a yield as high as 86.1% could be achieved for 1,4-cyclohexanediol at 200℃ in only 1 h.
基金supported by a Korea Evaluation Institute of Industrial Technology(KEIT)grant funded by the Korean government(MOTIE)(No.20022449)Commercialization Promotion Agency for R&D Outcomes(COMPA)grant funded by the Korean government(MSIT)(No.2021E100)+1 种基金supported by the Korea Electric Power Corporation(KEPCO),Open R&D(R22X004)the National Institute of Supercomputing and Network/Korea Institute of Science and Technology Information,which provided supercomputing resources,including technical support(KSC-2021-CRE-0568)。
文摘Ni-based porous electrocatalysts have been widely used in the hydrogen evolution reaction(HER)in alkaline water electrolysis,and the catalysts are produced by selective leaching of Al from Ni-Al alloys.It is well known that chemical leaching of Ni-Al intermetallic compound(IMC)generates a high surface area in Ni(OH)_(2).However,the Ni(OH)_(2) produced by leaching the Ni-Al intermetallic compound retards the hydrogen evolution reaction,which is attributed to its weak hydrogen adsorption energy.In this study,we controlled the chemical state of Ni using plasma vapor deposition(PVD)followed by heat treatment,selective Al leaching,and electrochemical reduction.X-ray diffraction(XRD),scanning microscopy(SEM),transmission electron microscopy(TEM),and energy-dispersive X-ray spectroscopy(EDS)were used to confirm the phase evolution of the electrocatalysts during fabrication.We reveal that the heat-treated Ni-Al alloy with a thick Ni2Al3surface layer underwent selective Al leaching and produced biphasic interfaces comprising Ni(OH)_(2) and NiAl IMCs at the edges of the grains in the outermost surface layer.Coupled oxidation of the interfacing NiAl IMCs facilitated the partial reduction of Ni(OH)_(2) to Ni(OH)_(2)/Ni in the grains during electrochemical reduction,as confirmed by X-ray photoelectron spectroscopy(XPS).An electrocatalyst containing partially reduced Ni(OH)_(2)/Ni exhibited an overpotential of 54 mV at 10 mA/cm^(2) in a half-cell measurement,and a cell voltage of 1.675 V at 0.4 A/cm2for single-cell operation.A combined experimental and theoretical study(density functional theory calculations)revealed that the superior HER activity was attributed to the presence of partially reduced metallic Ni with various defects and residual Al,which facilitated water adsorption,dissociation,and finally hydrogen evolution.
文摘A new combinatorial interpretation of Raney numbers is proposed. We apply this combinatorial interpretation to solve several tree enumeration counting problems. Further a generalized Catalan triangle is introduced and some of its properties are proved.
基金the National Natural Science Foun-dation of China(22022802 and 22288102).
文摘The catalytic hydrogenation of 2-nitro-4-acetylamino anisole(NMA)is a less-polluting and efficient method to produce 2-amino-4-acetamino anisole(AMA).However,the kinetics of catalytic hydrogenation of NMA to AMA remains obscure.In this work,the kinetic models including power-law model and Langmuir-Hinshelwood-Hougen-Watson(LHHW)model of NMA hydrogenation to AMA catalyzed by Raney nickel catalyst were investigated.All experiments were carried out under the elimination of mass transfer resistance within the temperature range of 70–100°C and the hydrogen pressure of 0.8–1.5 MPa.The reaction was found to follow 0.52-order kinetics with respect to the NMA concentration and 1.10-order kinetics in terms of hydrogen pressure.Based on the LHHW model,the dual-site dissociation adsorption of hydrogen was analyzed to be the rate determining step.The research of intrinsic kinetics of NMA to AMA provides the guidance for the reactor design and inspires the catalyst modification.
