Research on Design Method of the Full Form Ship with Minimum Thrust Deduction Factor

In the preliminary design stage of the full form ships, in order to obtain a hull form with low resistance and maximum propulsion efficiency, an optimization design program for a full form ship with the minimum thrust deduction factor has been developed, which combined the potential flow theory and boundary layer theory with the optimization technique. In the optimization process, the Sequential Unconstrained Minimization Technique（SUMT） interior point method of Nonlinear Programming（NLP） was proposed with the minimum thrust deduction factor as the objective function. An appropriate displacement is a basic constraint condition, and the boundary layer separation is an additional one. The parameters of the hull form modification function are used as design variables. At last, the numerical optimization example for lines of after-body of 50000 DWT product oil tanker was provided, which indicated that the propulsion efficiency was improved distinctly by this optimal design method.

THE OPTIMIZATION OF THE HULL FORM WITH THE MINIMUM WAVE MAKING RESISTANCE BASED ON RANKINE SOURCE METHOD

The hull form optimization concerns one of the most important applications of wave making resistance theories. In order to obtain a hull form with the minimum wave making resistance, an optimization design method based on the CFD is proposed, which combines the Rankine source method with the nonlinear programming （NLP）. The bow-body shape is optimized with the minimum wave making resistance as the objective function. A hull form modification function is introduced to represent an improved hull surface, which can be used to generate a new smooth hull surface by multiplying it by the offset data of the original hull surface. The parameters of the hull form modification function are taken as the design variables. Other constraint conditions can also be considered, for example, in optimizing the lines of the bow, appropriate displacements can be taken as the basic constraints. S60 hull form is selected as the original hull. Three improved hulls are obtained by optimal design. Rankine source method proves to be an effective method in ship form optimization based on analysis of the resistance performance and lines of the improved hull.

Shape Optimization of Bow Bulbs with Minimum Wave-Making Resistance Based on Rankine Source Method

The hull form optimization concerns one of the most important applications of wave-making resistance theories.In recent years,scholars can determine the hull form by using the optimization method based on the computational fluid dynamics(CFD)and other mathematical techniques.In this paper,the hull form optimization method based on the Rankine source method and nonlinear programming(NLP)is discussed;in the optimization process,a hull form modification function is introduced to represent an improved hull surface and to generate a new smooth hull surface by changing its frame lines and bow stem profiles under the prescribed design constraints. Numerical example is given for a practical container hull form.Finally,shape optimization of bow bulls is shown for non-protruding and protruding bow bulls.This study presents a simplified and practical design method to the select frame lines of bow bulls.

An iterative Rankine boundary element method for wave diffraction of a ship with forward speed

A 3-D time-domain seakeeping analysis tool has been newly developed by using a higher-order boundary element method with the Rankine source as the kernel function. An iterative time-marching scheme for updating both kinematic and dynamic free-surface boundary conditions is adopted for achieving numerical accuracy and stability. A rectangular computational domain moving with the mean speed of ship is introduced. A damping beach at the outer portion of the truncated free surface is installed for satisfying the radiation condition. After numerical convergence checked, the diffraction unsteady problem of a Wigley hull traveling with a constant forward speed in waves is studied. Extensive results including wave exciting forces, wave patterns and pressure distributions on the hull are presented to validate the efficiency and accuracy of the proposed 3-D time-domain iterative Rankine BEM approach. Computed results are compared to be in good agreement with the corresponding experimental data and other published numerical solutions.

Analytical Solution of Boundary Integral Equations for 2-D Steady Linear Wave Problems

Based on the Fourier transform, the analytical solution of boundary integral equations formulated for the complex velocity of a 2-D steady linear surface flow is derived. It has been found that before the radiation condition is imposed,free waves appear both far upstream and downstream. In order to cancel the free waves in far upstream regions, the eigensolution of a specific eigenvalue, which satisfies the homogeneous boundary integral equation, is found and superposed to the analytical solution. An example, a submerged vortex, is used to demonstrate the derived analytical solution. Furthermore,an analytical approach to imposing the radiation condition in the numerical solution of boundary integral equations for 2-D steady linear wave problems is proposed.

Effect of internal sloshing on added resistance of ship

The motion responses of ships carrying liquid cargo are affected not only by external wave excitation, but also by internal sloshing-induced forces and moments. Sloshing flow is coupled with the ship motion. This means the added resistance in waves may change when sloshing occurs inside the tank of the ship. In this study, the motion responses and added resistance of a ship, coupled with the sloshing-induced internal forces and moments are considered by using the linear potential theory. The three-dimensional Rankine panel method, in which the physical quantities are represented by using B-spline basis function, is applied. The sloshing flow of inner tanks is also simulated by Using the Rankine panel method and linearized boundary value problem. To study the added resistance, a near-field method, which integrates the second-order pressure on a body surface, is applied. The model ship is a blunt modified Wigley model with two inner tanks. Numerical results obtained without inner tanks are compared with the experimental data, and then the effect of filling ratio of inner tanks on ship motion and added resistance are observed. The components that induce added resistance are examined, and the effects of surge motion on sloshing flow and added resistance are briefly considered. This study shows that the sloshing flow inside the inner tanks may significantly influence not only the motion responses, but also added resistance, especially, when the incident wave frequency approaches the resonance frequency of the sloshing flow.

Numerical study on transom stern ventilation and resistance of high-speed ship in calm water

A transom stern is a common design feature for a high-speed ship.In the present study,the transom stern ventilation of NPL 3b,5b hull is investigated by three methods:H−H formula,Doctors’formula,and computational fluid dynamics(CFD)method at first.For the CFD method,the ratios of the wave elevation and wetted area are used to determine the transom ventilation.Comparisons of results show that Doctors’formula is more accurate to calculate the critical transom draft Froude number.And then a Rankine panel method(RPM)based on the high-order boundary element method incorporated the modified transom stern condition is implemented to evaluate the steady wave problem of a high-speed fishery patrol ship in calm water.Besides,free-surface(FS)and double body(DB)simulations based on Star-CCM+are carried out to obtain the wave-making resistance and total resistance.The results of the resistance and wave pattern around the fishery patrol ship computed by RPM show generally good agreement with experimental measurement and CFD results.Numerical results indicate that the developed Rankine panel method with transom condition could predict the resistance of high-speed displacement ships with good accuracy.

Multiobjective Optimization of Hull Form Based on Global Optimization Algorithm

Rankine source method,optimization technology,parametric modeling technology,and improved multiobjective optimization algorithm were combined to investigate the multiobjective optimization design of hull form.A multiobjective and multilevel optimization design framework was constructed for the comprehensive navigation performance of ships.CAESES software was utilized as the optimization platform,and nondominated sorting genetic algorithm II(NSGA-II)was used to conduct multiobjective optimization research on the resistance and sea-keeping performance of the ITTC Ship A-2 fishing vessel.Optimization objectives of this study are heave/pitch response amplitude and wave-making resistance.Taking the displacement and the length between perpendiculars as constraints,we optimized the profile of the hull.Analytic hierarchy process(AHP)and technique for order preference by similarity to ideal solution(TOPSIS)were used to sort and select Pareto solutions and determine weight coefficient of each navigation performance objective in the general objective.Finally,the hydrodynamic performance before and after the parametric deformation of the hull was compared.The results show that both the wave-making resistance and heave/pitch amplitude of the optimized hull form are reduced,and the satisfactory optimal hull form is obtained.The results of this study have a certain reference value for the initial stage of multiobjective optimization design of hull form.