The impact behaviour of three types of reactive powder concretes （RPC） was studied using the split Hopkinson press bar （SHPB） testing method. These RPC were prepared with steel fiber volume fraction of 0%, 3%, and...The impact behaviour of three types of reactive powder concretes （RPC） was studied using the split Hopkinson press bar （SHPB） testing method. These RPC were prepared with steel fiber volume fraction of 0%, 3%, and 4%, respectively. The stress-strain relationship, strain rate sensitivity threshold value, dynamic strength increase factor, modulus of elasticity and failure pattern of these RPC specimens subjected to impact load were investigated. From the tests, the strain rate sensitivity threshold value of 50 s-1 was obtained. The experimental results showed that when the strain rate increased from the threshold value to 95 s-1, the maximum stress of RPC increased by about 20% and the modulus of elasticity of RPC increased by about 30%. The failure pattern of RPC specimens with steel fiber reinforcement was very different from that of the RPC matrix specimen when subjected to impact loading. Under similar impact loading rate, cracks developed in the steel fiber reinforced RPC specimens, whilst the RPC matrix specimens were broken into small pieces.展开更多
In this paper the coefficient and law of the size effect of RPC were studied through experiments and theoretical analysis. The size-effect coefficients for the compressive strength of RPC are deduced through experimen...In this paper the coefficient and law of the size effect of RPC were studied through experiments and theoretical analysis. The size-effect coefficients for the compressive strength of RPC are deduced through experiments.They indicate that RPC without fiber behaves quite the same as normal or high strength concrete.The size effect on compressive strength is more prominent in RPC containing fiber.Bazant's size effect formula of compressive strength applies to RPC.A formula is given to predict the compressive strength of cubic RPC specimens 100 mm on a side where the fiber dosage ranges from 0-2%.展开更多
We examined the applicability of the pumice aggregate on the concrete formed by considering the reactive powder concrete mixture ratios, for the rigid superstructure concrete road pavement and building construction. T...We examined the applicability of the pumice aggregate on the concrete formed by considering the reactive powder concrete mixture ratios, for the rigid superstructure concrete road pavement and building construction. The natural pumice aggregate in fibrous and non-fibrous concrete samples was used in the production of concrete by fracturing in 0.1-0.6 mm dimensions in rotor mill. The concreted formed in this way is named after the pumice powder concrete(PPC). The PPC samples produced were taken 7 days as 20 ℃ standard water cure, 28 days as 20 ℃ standard cure and 9 different types of combined cures. The combined cures were applied different temperatures in different durations. PPC samples were subjected to some pressure and flexural tests at the end of the standard water and combined cures. The highest compressive and flexural strengths of PPC samples were obtained after the combined cures: 3 days in 20 ℃ as standard water curing + 2 days in 180 ℃ in drying-oven. The highest compressive strength of PPC samples without any fiber was found to be 47.27 MPa, as for the highest flexural strength, it is found to be 5.23 MPa, in the end of the study. The highest compressive strength of fibrous PPC samples was 51.12 MPa, while flexural strength was 6.57 MPa.展开更多
To study the plastic properties of reactive powder concrete continuous beams reinforced with GFRP bars,the calculation programs for moment redistribution coefficients are prepared by using nonlinear analysis methods s...To study the plastic properties of reactive powder concrete continuous beams reinforced with GFRP bars,the calculation programs for moment redistribution coefficients are prepared by using nonlinear analysis methods such as moment-curvature,conjugate beam method and so on. By comparing the test results of existed FRP bars reinforced concrete continuous beams with simulation results,the accuracy of the calculation program is verified. Then 18 simulated GFRP bars reinforced reactive powder concrete continuous beams are selected whose change parameters are reinforcement ratio of mid-span and middle support. Through the nonlinear analysis of simulated beams,moment redistribution coefficients under mid-span concentrated loads,one-third point loads and uniformly distributed loads are obtained respectively. Thus the formula of moment redistribution coefficients is obtained by fitting moment redistribution coefficients and factors. The results show that the reactive powder concrete continuous beams reinforced with GFRP bars have good plastic properties.展开更多
为探明火灾下活性粉末混凝土(Receative power concrete,RPC)梁斜截面承载性能退化规律,设计制作了六根RPC简支梁试件,开展了恒载下ISO834标准火灾试验,获得了时间-位移曲线、荷载-位移曲线、内部温度变化、裂缝开展、破坏形态、高温爆...为探明火灾下活性粉末混凝土(Receative power concrete,RPC)梁斜截面承载性能退化规律,设计制作了六根RPC简支梁试件,开展了恒载下ISO834标准火灾试验,获得了时间-位移曲线、荷载-位移曲线、内部温度变化、裂缝开展、破坏形态、高温爆裂等数据,分析了剪跨比、荷载水平、配箍率、纵筋配筋率对火灾下RPC梁斜截面承载性能的影响规律。结果表明:剪跨比、荷载水平是影响RPC梁斜截面耐火极限的关键因素,剪跨比由2.5增至3.5,荷载水平由0.25增至0.45,RPC梁耐火极限可降低30 min以上;配箍率对RPC梁的斜截面承载力和耐火极限影响显著;纵筋配筋率对RPC梁耐火极限影响甚微。火灾高温、爆裂削弱了RPC梁的斜截面承载性能,爆裂导致内部材料直接受火,加速其力学性能劣化,使梁斜截面承载力降低33.5%以上。该研究可为火灾下RPC梁斜截面承载安全及火灾后加固修复提供参考。展开更多
基金Funded by the National Natural Science Foundation of China(Nos.51478128,51278135 and 50708022)the Scientific and Research Developing Project of Ministry of Housing and Urban-Rural Development of China(2010-K3-27)+1 种基金the Guangzhou Government Higher Vocational Colleges&Schools Yang Cheng Scholar Funded Scheme(10A043G)the Foundation for Fostering the Scientific and Technical Innovation of Guangzhou University
文摘The impact behaviour of three types of reactive powder concretes （RPC） was studied using the split Hopkinson press bar （SHPB） testing method. These RPC were prepared with steel fiber volume fraction of 0%, 3%, and 4%, respectively. The stress-strain relationship, strain rate sensitivity threshold value, dynamic strength increase factor, modulus of elasticity and failure pattern of these RPC specimens subjected to impact load were investigated. From the tests, the strain rate sensitivity threshold value of 50 s-1 was obtained. The experimental results showed that when the strain rate increased from the threshold value to 95 s-1, the maximum stress of RPC increased by about 20% and the modulus of elasticity of RPC increased by about 30%. The failure pattern of RPC specimens with steel fiber reinforcement was very different from that of the RPC matrix specimen when subjected to impact loading. Under similar impact loading rate, cracks developed in the steel fiber reinforced RPC specimens, whilst the RPC matrix specimens were broken into small pieces.
基金Project 50508005 supported by the National Natural Science Foundations of China
文摘In this paper the coefficient and law of the size effect of RPC were studied through experiments and theoretical analysis. The size-effect coefficients for the compressive strength of RPC are deduced through experiments.They indicate that RPC without fiber behaves quite the same as normal or high strength concrete.The size effect on compressive strength is more prominent in RPC containing fiber.Bazant's size effect formula of compressive strength applies to RPC.A formula is given to predict the compressive strength of cubic RPC specimens 100 mm on a side where the fiber dosage ranges from 0-2%.
基金Funded by the Scientific Research Projects Department of Bitlis Eren University(No.BEBAP-2016.07)
文摘We examined the applicability of the pumice aggregate on the concrete formed by considering the reactive powder concrete mixture ratios, for the rigid superstructure concrete road pavement and building construction. The natural pumice aggregate in fibrous and non-fibrous concrete samples was used in the production of concrete by fracturing in 0.1-0.6 mm dimensions in rotor mill. The concreted formed in this way is named after the pumice powder concrete(PPC). The PPC samples produced were taken 7 days as 20 ℃ standard water cure, 28 days as 20 ℃ standard cure and 9 different types of combined cures. The combined cures were applied different temperatures in different durations. PPC samples were subjected to some pressure and flexural tests at the end of the standard water and combined cures. The highest compressive and flexural strengths of PPC samples were obtained after the combined cures: 3 days in 20 ℃ as standard water curing + 2 days in 180 ℃ in drying-oven. The highest compressive strength of PPC samples without any fiber was found to be 47.27 MPa, as for the highest flexural strength, it is found to be 5.23 MPa, in the end of the study. The highest compressive strength of fibrous PPC samples was 51.12 MPa, while flexural strength was 6.57 MPa.
基金Sponsored by Changjiang Scholars Program of China (Grant No 2009-37)New Century Talent Support Program Project of Ministry of Education (Secretary for Education account2005290)
文摘To study the plastic properties of reactive powder concrete continuous beams reinforced with GFRP bars,the calculation programs for moment redistribution coefficients are prepared by using nonlinear analysis methods such as moment-curvature,conjugate beam method and so on. By comparing the test results of existed FRP bars reinforced concrete continuous beams with simulation results,the accuracy of the calculation program is verified. Then 18 simulated GFRP bars reinforced reactive powder concrete continuous beams are selected whose change parameters are reinforcement ratio of mid-span and middle support. Through the nonlinear analysis of simulated beams,moment redistribution coefficients under mid-span concentrated loads,one-third point loads and uniformly distributed loads are obtained respectively. Thus the formula of moment redistribution coefficients is obtained by fitting moment redistribution coefficients and factors. The results show that the reactive powder concrete continuous beams reinforced with GFRP bars have good plastic properties.
文摘为探明火灾下活性粉末混凝土(Receative power concrete,RPC)梁斜截面承载性能退化规律,设计制作了六根RPC简支梁试件,开展了恒载下ISO834标准火灾试验,获得了时间-位移曲线、荷载-位移曲线、内部温度变化、裂缝开展、破坏形态、高温爆裂等数据,分析了剪跨比、荷载水平、配箍率、纵筋配筋率对火灾下RPC梁斜截面承载性能的影响规律。结果表明:剪跨比、荷载水平是影响RPC梁斜截面耐火极限的关键因素,剪跨比由2.5增至3.5,荷载水平由0.25增至0.45,RPC梁耐火极限可降低30 min以上;配箍率对RPC梁的斜截面承载力和耐火极限影响显著;纵筋配筋率对RPC梁耐火极限影响甚微。火灾高温、爆裂削弱了RPC梁的斜截面承载性能,爆裂导致内部材料直接受火,加速其力学性能劣化,使梁斜截面承载力降低33.5%以上。该研究可为火灾下RPC梁斜截面承载安全及火灾后加固修复提供参考。
