Design analysis and its application of M out of N in reactor protection system

The reliability and availability of the reactor protection system （RPS） can be improved by using M out of N judg- ment system. By analyzing two quantitative indicators, the rate of refusal to operate and mal-operation rate, a strict math- ematical formula and an approximate calculation are stated. The differences of a series of judgment systems are discussed on condition that the unsafe failure probability and the security failure probability are both 0.1. Based on given parameters （A, B,P, Q）： A is upper limit of the refusal rate for the RPS, B is upper limit of the real-operation rate, P and Q are basic protection unit rates corresponding to refusal rate and mal-operation rate, respectively. According to these parameters, the values of N and M can be solved.

Bayesian belief-based model for reliability improvement of the digital reactor protection system

The digital reactor protection system(RPS)is one of the most important digital instrumentation and control(I&C)systems utilized in nuclear power plants(NPPs).It ensures a safe reactor trip when the safety-related parameters violate the operational limits and conditions of the reactor.Achieving high reliability and availability of digital RPS is essential to maintaining a high degree of reactor safety and cost savings.The main objective of this study is to develop a general methodology for improving the reliability of the RPS in NPP,based on a Bayesian Belief Network(BBN)model.The structure of BBN models is based on the incorporation of failure probability and downtime of the RPS I&C components.Various architectures with dual-state nodes for the I&C components were developed for reliability-sensitive analysis and availability optimization of the RPS and to demonstrate the effect of I&C components on the failure of the entire system.A reliability framework clarified as a reliability block diagram transformed into a BBN representation was constructed for each architecture to identify which one will fit the required reliability.The results showed that the highest availability obtained using the proposed method was 0.9999998.There are 120 experiments using two common component importance measures that are applied to define the impact of I&C modules,which revealed that some modules are more risky than others and have a larger effect on the failure of the digital RPS.

Power Uprate and Lifetime Extension

Overall purpose of a power uprate and lifetime extension project （PLEX） is to modernize the power station cost-efficiently resulting in fulfilling the following overall requirements. The primary target is to meet the requirements provided by the local regulations from the regulatory offices. The controlling, monitoring and power supply of safety functions have to comply with these regulations. Any deviations from the existing safety analysis report （SAR） have to be corrected. On top of the safety measures the general technical status should be raised to extend the lifetime to 60 years. A high availability during the modernization has to be assured.