期刊文献+
共找到63,233篇文章
< 1 2 250 >
每页显示 20 50 100
A YOLOv8-CE-based real-time traffic sign detection and identification method for autonomous vehicles
1
作者 Yuechen Luo Yusheng Ci +1 位作者 Hexin Zhang Lina Wu 《Digital Transportation and Safety》 2024年第3期82-91,共10页
Traffic sign detection in real scenarios is challenging due to their complexity and small size,often preventing existing deep learning models from achieving both high accuracy and real-time performance.An improved YOL... Traffic sign detection in real scenarios is challenging due to their complexity and small size,often preventing existing deep learning models from achieving both high accuracy and real-time performance.An improved YOLOv8 model for traffic sign detection is proposed.Firstly,by adding Coordinate Attention(CA)to the Backbone,the model gains location information,improving detection accuracy.Secondly,we also introduce EIoU to the localization function to address the ambiguity in aspect ratio descriptions by calculating the width-height difference based on CIoU.Additionally,Focal Loss is incorporated to balance sample difficulty,enhancing regression accuracy.Finally,the model,YOLOv8-CE(YOLOv8-Coordinate Attention-EIoU),is tested on the Jetson Nano,achieving real-time street scene detection and outperforming the Raspberry Pi 4B.Experimental results show that YOLOv8-CE excels in various complex scenarios,improving mAP by 2.8%over the original YOLOv8.The model size and computational effort remain similar,with the Jetson Nano achieving an inference time of 96 ms,significantly faster than the Raspberry Pi 4B. 展开更多
关键词 YOLOv8-CE-based real-time traffic SIGNS Detection
下载PDF
Effects of real-time traffic information systems on traffic performance under different network structures 被引量:3
2
作者 YAO Xue-heng F.Benjamin ZHAN +1 位作者 LU Yong-mei YANG Min-hua 《Journal of Central South University》 SCIE EI CAS 2012年第2期586-592,共7页
The effects of real-time traffic information system(RTTIS)on traffic performance under parallel,grid and ring networks were investigated.The simulation results show that the effects of the proportion of RTTIS usage de... The effects of real-time traffic information system(RTTIS)on traffic performance under parallel,grid and ring networks were investigated.The simulation results show that the effects of the proportion of RTTIS usage depend on the road network structures.For traffic on a parallel network,the performance of groups with and without RTTIS level is improved when the proportion of vehicles using RTTIS is greater than 0 and less than 30%,and a proportion of RTTIS usage higher than 90%would actually deteriorate the performance.For both grid and ring networks,a higher proportion of RTTIS usage always improves the performance of groups with and without RTTIS.For all three network structures,vehicles without RTTIS benefit from some proportion of RTTIS usage in a system. 展开更多
关键词 real-time traffic information traffic network traffic efficiency optimization of urban traffic
下载PDF
Modulating Traffic Signal Phases to Realize Real-Time Traffic Control System 被引量:2
3
作者 Rajendra S. Parmar Bhushan H. Trivedi 《Journal of Transportation Technologies》 2017年第1期26-35,共10页
This paper proposes innovations to address challenges emanating from road traffic congestion. Improving economies create more car owners resulting in increased automobile manufacturing, increased vehicle population gi... This paper proposes innovations to address challenges emanating from road traffic congestion. Improving economies create more car owners resulting in increased automobile manufacturing, increased vehicle population giving rise to higher emission of CO2 resulting in traffic congestion. Congested traffic has idling vehicles which emit higher CO2 and pollution. Besides, traffic congestion increases turnaround time, delivery time, commuting time and related logistical aspects. Commuting time negatively impacts working hours. Unless the traffic congestion is mitigated, the economy will take a beating creating a vicious ecology cycle. Building new roads, bridges or reconditioning of infrastructure is not always the best possible solutions. Efficient traffic management is a key to country’s economic growth. Various analytical models are employed to study, appreciate traffic congestion. The paper studies these models to infer that real time approach is the only solution. Several approaches are being worked on and few commercial systems too are available. These systems provide traffic information for course correction. However, it has latency and hence deviates from real time environment. Traffic congestion being highly dynamic in nature, it necessitates real time solution with real time inputs. It is proposed to integrate Real time traffic data with the traffic signal thus modulating the cycle timings at every junction. Deviation from static asymmetric cycle timing is implemented by assigning green phases based on density of vehicles. With minimalistic infrastructure and negligible incremental cost, the paper not only proposes to address traffic congestion but also paves the way for capturing traffic offenses, vehicle tracking and toll collection. The research is imminently realizable and makes a strong case for a PPP (Public Private Partnership) project. 展开更多
关键词 Vehicular traffic Vehicular CONGESTION DETECTION SYSTEM Vehicular CONGESTION DETECTION SYSTEM Vehicle Mobility Sensors traffic SIGNALS Intelligent traffic SIGNALS Dynamictraffic Assignment
下载PDF
Screening and reconstruction of real-time traffic data 被引量:1
4
作者 裴玉龙 马骥 《Journal of Harbin Institute of Technology(New Series)》 EI CAS 2003年第1期1-6,共6页
The quality of real time traffic information is of the great importance, therefore the factors having effect on traffic characteristics are analyzed in general, and the necessities of real time data processing are sum... The quality of real time traffic information is of the great importance, therefore the factors having effect on traffic characteristics are analyzed in general, and the necessities of real time data processing are summarized. The identification and reconstruction of real time traffic data are analyzed using Kalman filter equation and statistical approach. Four methods for ITS (Intelligent transportation system) detector data screening in traffic management systems are discussed in detail. Meanwhile traffic data examinations are discussed with solutions formulated through analysis, and recommendations are made for information collection and data management in future. 展开更多
关键词 real time traffic data ITS SCREENING RECONSTRUCTION
下载PDF
A Statistical Framework for Real-Time Traffic Accident Recognition 被引量:1
5
作者 Samy Sadek Ayoub Al-Hamadi +1 位作者 Bernd Michaelis Usama Sayed 《Journal of Signal and Information Processing》 2010年第1期77-81,共5页
Over the past decade, automatic traffic accident recognition has become a prominent objective in the area of machine vision and pattern recognition because of its immense application potential in developing autonomous... Over the past decade, automatic traffic accident recognition has become a prominent objective in the area of machine vision and pattern recognition because of its immense application potential in developing autonomous Intelligent Transportation Systems (ITS). In this paper, we present a new framework toward a real-time automated recognition of traffic accident based on the Histogram of Flow Gradient (HFG) and statistical logistic regression analysis. First, optical flow is estimated and the HFG is constructed from video shots. Then vehicle patterns are clustered based on the HFG-features. By using logistic regression analysis to fit data to logistic curves, the classifier model is generated. Finally, the trajectory of the vehicle by which the accident was occasioned, is determined and recorded. The experimental results on real video sequences demonstrate the efficiency and the applicability of the framework and show it is of higher robustness and can comfortably provide latency guarantees to real-time surveillance and traffic monitoring applications. 展开更多
关键词 Activity PATTERN Automatic traffic ACCIDENT RECOGNITION Flow GRADIENT LOGISTIC Model
下载PDF
Vehicle emissions calculation for urban roads based on the Macroscopic Fundamental Diagram method and real-time traffic information 被引量:1
6
作者 WANG Kun TONG Yali +4 位作者 CAO Tianhui WANG Chenlong WANG Renjie GAO Jiajia LIU Yuan 《Atmospheric and Oceanic Science Letters》 CSCD 2020年第2期89-96,共8页
Vehicle emissions calculation methods mostly use ownership information or annual road monitoring data as the activity level to calculate air pollutant emissions,but it is hard to reflect either the emissions intensity... Vehicle emissions calculation methods mostly use ownership information or annual road monitoring data as the activity level to calculate air pollutant emissions,but it is hard to reflect either the emissions intensity under different conditions or the spatiotemporal characteristics in various sections based on such approaches.This paper presents a method based on the Macroscopic Fundamental Diagram and real-time traffic data to calculate vehicle emissions,which could reflect the operation conditions and emission characteristics of vehicles.Following the‘Technical Guide for the Compiling of Road Vehicle Air Pollutant Emissions Inventories’,the emissions of three roads with different lane numbers and road grades in Beijing were estimated and verified using this method.Compared with monitoring data,the average deviations of the traffic flow on the Fifth Expressway,Jingfu National Highway,and Jingzhou Provincial Highway were?25.5%,?26.5%,and?13.4%,respectively,and the average deviations of nitrogen oxides emissions were?27.7%,?12.9%,and?12%,respectively.This method showed good application potentials to construct the emissions inventory applied to the block-scale model and analyze the spatiotemporal distribution characteristics of motor vehicle emissions in urban areas. 展开更多
关键词 Macroscopic Fundamental Diagram traffic emissions road type
下载PDF
Real-Time Traffic Signal Timing for Urban Road Multi-Intersection
7
作者 Lin Dong Wushan Chen 《Intelligent Information Management》 2010年第8期483-486,共4页
this paper develops a real-time traffic signal timing model which is to be integrated into a single intersection for urban road, thereby solving the problem of traffic congestion. We analyze the current situation of t... this paper develops a real-time traffic signal timing model which is to be integrated into a single intersection for urban road, thereby solving the problem of traffic congestion. We analyze the current situation of the traffic flow with release matrix firstly, and then put forward the basic models to minimize total delay time of vehicles at the intersection. The optimal real-time signal timing model (non-fixed cycle and non-fixed split) is built with the Webster split optimal model. At last, the simulated results, which are compared with conventional model, manifest the promising properties of proposed model. 展开更多
关键词 traffic SIGNAL Control traffic Flows real-time SIGNAL Timing Release Matrix SPLIT PASSION Distribution
下载PDF
Resource Efficient Hardware Implementation for Real-Time Traffic Sign Recognition
8
作者 Huai-Mao Weng Ching-Te Chiu 《Journal of Transportation Technologies》 2018年第3期209-231,共23页
Traffic sign recognition (TSR, or Road Sign Recognition, RSR) is one of the Advanced Driver Assistance System (ADAS) devices in modern cars. To concern the most important issues, which are real-time and resource effic... Traffic sign recognition (TSR, or Road Sign Recognition, RSR) is one of the Advanced Driver Assistance System (ADAS) devices in modern cars. To concern the most important issues, which are real-time and resource efficiency, we propose a high efficiency hardware implementation for TSR. We divide the TSR procedure into two stages, detection and recognition. In the detection stage, under the assumption that most German traffic signs have red or blue colors with circle, triangle or rectangle shapes, we use Normalized RGB color transform and Single-Pass Connected Component Labeling (CCL) to find the potential traffic signs efficiently. For Single-Pass CCL, our contribution is to eliminate the “merge-stack” operations by recording connected relations of region in the scan phase and updating the labels in the iterating phase. In the recognition stage, the Histogram of Oriented Gradient (HOG) is used to generate the descriptor of the signs, and we classify the signs with Support Vector Machine (SVM). In the HOG module, we analyze the required minimum bits under different recognition rate. The proposed method achieves 96.61% detection rate and 90.85% recognition rate while testing with the GTSDB dataset. Our hardware implementation reduces the storage of CCL and simplifies the HOG computation. Main CCL storage size is reduced by 20% comparing to the most advanced design under typical condition. By using TSMC 90 nm technology, the proposed design operates at 105 MHz clock rate and processes in 135 fps with the image size of 1360 × 800. The chip size is about 1 mm2 and the power consumption is close to 8 mW. Therefore, this work is resource efficient and achieves real-time requirement. 展开更多
关键词 traffic SIGN Recognition Advanced Driver ASSISTANCE System real-time Processing Color Segmentation Connected Component Analysis Histo-gram of Oriented Gradient Support Vector Machine German traffic SIGN Detection BENCHMARK CMOS ASIC VLSI
下载PDF
Real-time traffic information extraction based on compressed video with interframe motion vector
9
作者 黄庆明 王聪 《Journal of Harbin Institute of Technology(New Series)》 EI CAS 2003年第3期284-289,共6页
Extraction of traffic information from image or video sequence is a hot research topic in intelligenttransportation system and computer vision. A real-time traffic information extraction method based on com-pressed vi... Extraction of traffic information from image or video sequence is a hot research topic in intelligenttransportation system and computer vision. A real-time traffic information extraction method based on com-pressed video with interframe motion vectors for speed, density and flow detection, has been proposed for ex-traction of traffic information under fixed camera setting and well-defined environment. The motion vectors arefirst separated from the compressed video streams, and then filtered to eliminate incorrect and noisy vectors u-sing the well-defined environmental knowledge. By applying the projective transform and using the filtered mo-tion vectors, speed can be calculated from motion vector statistics, density can be estimated using the motionvector occupancy, and flow can be detected using the combination of speed and density. The embodiment of aprototype system for sky camera traffic monitoring using the MPEG video has been implemented, and experi-mental results proved the effectiveness of the method proposed. 展开更多
关键词 extraction of traffic information Interframe motion vector compressed video stream
下载PDF
Real-Time Traffic State and Boundary Flux Estimation with Distributed Speed Detecting Networks
10
作者 Yichi Zhang Heng Deng 《Journal of Transportation Technologies》 2022年第4期533-543,共11页
The rapid development of 5G mobile communication and portable traffic detection technologies enhances highway transportation systems in detail and at a vehicle level. Besides the advantage of no disturbance to the reg... The rapid development of 5G mobile communication and portable traffic detection technologies enhances highway transportation systems in detail and at a vehicle level. Besides the advantage of no disturbance to the regular traffic operation, these ubiquitous sensing technologies have the potential for unprecedented data collection at any temporal and spatial position. While as a typical distributed parameter system, the freeway traffic dynamics are determined by the current system states and the boundary traffic demand-supply. Using the three-step extended Kalman filtering, this paper simultaneously estimates the real-time traffic state and the boundary flux of freeway traffic with the distributed speed detector networks organized at any location of interest. In order to assess the effectiveness of the proposed approach, a freeway segment from Interstate 80 East (I-80E) in Alameda, Emeryville, and Northern California is selected. Experimental results show that the proposed method has the potential of using only speed detecting data to monitor the state of urban freeway transportation systems without access to the traditional measurement data, such as the boundary flows. 展开更多
关键词 traffic State Boundary Flux Estimation Extended Kalman Filtering Distributed Speed Detecting Networks
下载PDF
Real-Time Prediction of Urban Traffic Problems Based on Artificial Intelligence-Enhanced Mobile Ad Hoc Networks(MANETS)
11
作者 Ahmed Alhussen Arshiya S.Ansari 《Computers, Materials & Continua》 SCIE EI 2024年第5期1903-1923,共21页
Traffic in today’s cities is a serious problem that increases travel times,negatively affects the environment,and drains financial resources.This study presents an Artificial Intelligence(AI)augmentedMobile Ad Hoc Ne... Traffic in today’s cities is a serious problem that increases travel times,negatively affects the environment,and drains financial resources.This study presents an Artificial Intelligence(AI)augmentedMobile Ad Hoc Networks(MANETs)based real-time prediction paradigm for urban traffic challenges.MANETs are wireless networks that are based on mobile devices and may self-organize.The distributed nature of MANETs and the power of AI approaches are leveraged in this framework to provide reliable and timely traffic congestion forecasts.This study suggests a unique Chaotic Spatial Fuzzy Polynomial Neural Network(CSFPNN)technique to assess real-time data acquired from various sources within theMANETs.The framework uses the proposed approach to learn from the data and create predictionmodels to detect possible traffic problems and their severity in real time.Real-time traffic prediction allows for proactive actions like resource allocation,dynamic route advice,and traffic signal optimization to reduce congestion.The framework supports effective decision-making,decreases travel time,lowers fuel use,and enhances overall urban mobility by giving timely information to pedestrians,drivers,and urban planners.Extensive simulations and real-world datasets are used to test the proposed framework’s prediction accuracy,responsiveness,and scalability.Experimental results show that the suggested framework successfully anticipates urban traffic issues in real-time,enables proactive traffic management,and aids in creating smarter,more sustainable cities. 展开更多
关键词 Mobile AdHocNetworks(MANET) urban traffic prediction artificial intelligence(AI) traffic congestion chaotic spatial fuzzy polynomial neural network(CSFPNN)
下载PDF
Dynamic Forecasting of Traffic Event Duration in Istanbul:A Classification Approach with Real-Time Data Integration
12
作者 Mesut Ulu Yusuf Sait Türkan +2 位作者 Kenan Menguc Ersin Namlı Tarık Kucukdeniz 《Computers, Materials & Continua》 SCIE EI 2024年第8期2259-2281,共23页
Today,urban traffic,growing populations,and dense transportation networks are contributing to an increase in traffic incidents.These incidents include traffic accidents,vehicle breakdowns,fires,and traffic disputes,re... Today,urban traffic,growing populations,and dense transportation networks are contributing to an increase in traffic incidents.These incidents include traffic accidents,vehicle breakdowns,fires,and traffic disputes,resulting in long waiting times,high carbon emissions,and other undesirable situations.It is vital to estimate incident response times quickly and accurately after traffic incidents occur for the success of incident-related planning and response activities.This study presents a model for forecasting the traffic incident duration of traffic events with high precision.The proposed model goes through a 4-stage process using various features to predict the duration of four different traffic events and presents a feature reduction approach to enable real-time data collection and prediction.In the first stage,the dataset consisting of 24,431 data points and 75 variables is prepared by data collection,merging,missing data processing and data cleaning.In the second stage,models such as Decision Trees(DT),K-Nearest Neighbour(KNN),Random Forest(RF)and Support Vector Machines(SVM)are used and hyperparameter optimisation is performed with GridSearchCV.In the third stage,feature selection and reduction are performed and real-time data are used.In the last stage,model performance with 14 variables is evaluated with metrics such as accuracy,precision,recall,F1-score,MCC,confusion matrix and SHAP.The RF model outperforms other models with an accuracy of 98.5%.The study’s prediction results demonstrate that the proposed dynamic prediction model can achieve a high level of success. 展开更多
关键词 traffic event duration forecasting machine learning feature reduction shapley additive explanations(SHAP)
下载PDF
Models to Simulate Effective Coverage of Fire Station Based on Real-Time Travel Times
13
作者 Sicheng Zhu Dingli Liu +2 位作者 Weijun Liu Ying Li Tian Zhou 《Computer Modeling in Engineering & Sciences》 SCIE EI 2024年第4期483-513,共31页
In recent years,frequent fire disasters have led to enormous damage in China.Effective firefighting rescues can minimize the losses caused by fires.During the rescue processes,the travel time of fire trucks can be sev... In recent years,frequent fire disasters have led to enormous damage in China.Effective firefighting rescues can minimize the losses caused by fires.During the rescue processes,the travel time of fire trucks can be severely affected by traffic conditions,changing the effective coverage of fire stations.However,it is still challenging to determine the effective coverage of fire stations considering dynamic traffic conditions.This paper addresses this issue by combining the traveling time calculationmodelwith the effective coverage simulationmodel.In addition,it proposes a new index of total effective coverage area(TECA)based on the time-weighted average of the effective coverage area(ECA)to evaluate the urban fire services.It also selects China as the case study to validate the feasibility of the models,a fire station(FS-JX)in Changsha.FS-JX station and its surrounding 9,117 fire risk points are selected as the fire service supply and demand points,respectively.A total of 196 simulation scenarios throughout a consecutiveweek are analyzed.Eventually,1,933,815 sets of valid sample data are obtained.The results showed that the TECA of FS-JX is 3.27 km^(2),which is far below the standard requirement of 7.00 km^(2) due to the traffic conditions.The visualization results showed that three rivers around FS-JX interrupt the continuity of its effective coverage.The proposed method can provide data support to optimize the locations of fire stations by accurately and dynamically determining the effective coverage of fire stations. 展开更多
关键词 Fire services fire station effective coverage real-time traffic SIMULATION
下载PDF
基于Real-time PCR法检测乳粉中牛源性成分定量研究
14
作者 陈晨 史国华 +5 位作者 陈勃旭 张瑞 王玉欣 贾文珅 陈佳 周巍 《粮油食品科技》 CAS CSCD 北大核心 2024年第2期159-164,共6页
基于Real-timePCR建立了乳粉中牛源性成分相对定量检测方法,并对牛的特异性引物与探针进行了特异性、灵敏度和稳定性测试。通过模拟不同浓度牛乳粉与马乳粉混合样本,根据其△Ct值的函数关系进行线性拟合进而绘制标准曲线,建立乳粉中牛... 基于Real-timePCR建立了乳粉中牛源性成分相对定量检测方法,并对牛的特异性引物与探针进行了特异性、灵敏度和稳定性测试。通过模拟不同浓度牛乳粉与马乳粉混合样本,根据其△Ct值的函数关系进行线性拟合进而绘制标准曲线,建立乳粉中牛源性成分的相对定量检测。结果显示,该方法的最低检测限为0.00001 mg/mL,回收率为91.11%~119.2%,组间变异系数≤0.58%、组内变异系数≤1.44%。说明该方法在特异性与稳定性上适用于乳粉中牛源性成分及含量的掺假检测。 展开更多
关键词 牛乳粉 马乳粉 real-time PCR 掺假检测
下载PDF
A multifunctional shear apparatus for rocks subjected to true triaxial stress and high temperature in real-time 被引量:1
15
作者 Jun Zhao Xia-Ting Feng +2 位作者 Jia-Rong Wang Liang Hu Yue Guo 《Journal of Rock Mechanics and Geotechnical Engineering》 SCIE CSCD 2024年第9期3524-3543,共20页
Deep engineering disasters,such as rockbursts and collapses,are more related to the shear slip of rock joints.A novel multifunctional device was developed to study the shear failure mechanism in rocks.Using this devic... Deep engineering disasters,such as rockbursts and collapses,are more related to the shear slip of rock joints.A novel multifunctional device was developed to study the shear failure mechanism in rocks.Using this device,the complete shearedeformation process and long-term shear creep tests could be performed on rocks under constant normal stiffness(CNS)or constant normal loading(CNL)conditions in real-time at high temperature and true-triaxial stress.During the research and development process,five key technologies were successfully broken through:(1)the ability to perform true-triaxial compressioneshear loading tests on rock samples with high stiffness;(2)a shear box with ultra-low friction throughout the entire stress space of the rock sample during loading;(3)a control system capable of maintaining high stress for a long time and responding rapidly to the brittle fracture of a rock sample as well;(4)a refined ability to measure the volumetric deformation of rock samples subjected to true triaxial shearing;and(5)a heating system capable of maintaining uniform heating of the rock sample over a long time.By developing these technologies,loading under high true triaxial stress conditions was realized.The apparatus has a maximum normal stiffness of 1000 GPa/m and a maximum operating temperature of 300C.The differences in the surface temperature of the sample are constant to within5C.Five types of true triaxial shear tests were conducted on homogeneous sandstone to verify that the apparatus has good performance and reliability.The results show that temperature,lateral stress,normal stress and time influence the shear deformation,failure mode and strength of the sandstone.The novel apparatus can be reliably used to conduct true-triaxial shear tests on rocks subjected to high temperatures and stress. 展开更多
关键词 True-triaxial shear apparatus ROCKS Complete shear stress-deformation process CREEP real-time high-temperature
下载PDF
一种基于real-time PCR技术的TTV检测方法的建立及应用
16
作者 贾毅博 王高玉 +4 位作者 邓宛心 林彩云 杨华 陈运春 尹飞飞 《海南医学院学报》 CAS 北大核心 2024年第7期489-497,共9页
目的:本研究旨在开发一种具有更高灵敏度和特异性的TTV检测技术,为揭示TTV在多种疾病过程中的作用提供重要的技术支持。方法:为了更精确、灵敏的检测TTV,本研究分析了目前公布的所有亚型的TTV基因序列,在此基础上建立了一种基于UTR区域... 目的:本研究旨在开发一种具有更高灵敏度和特异性的TTV检测技术,为揭示TTV在多种疾病过程中的作用提供重要的技术支持。方法:为了更精确、灵敏的检测TTV,本研究分析了目前公布的所有亚型的TTV基因序列,在此基础上建立了一种基于UTR区域的real-time PCR检测方法,并与文献报道应用较为广泛的PCR检测方法进行了对比。结果:本研究建立的方法在1×10^(7)~1×10^(1) copies/μL标准品浓度范围内具有良好的线性关系,相关系数为1.000,斜率为-3.446,检测下限为1×10^(1) copies/μL。重复性试验结果显示,组内变异系数为7.22%,表明本方法重复性、稳定性较强。针对30份临床样本,使用本研究建立的real-time PCR检测方法及目前被多个研究所使用的4套引物进行对比。结果表明,本研究所建立的方法灵敏度显著高于文献中报道的4种方法(P<0.01);Sanger测序结果表明,本方法检测出的30份阳性样本均为TTV,检测特异性为100%。结论:本研究采用基于TaqMan探针的real-time PCR检测方法,检测灵敏性高、覆盖基因型范围广,尤其对于TTV病毒载量较低的情况下能够进行定量检测,对于TTV病毒的致病性及作为免疫标志物的应用提供重要的技术支持。 展开更多
关键词 Torque teno virus 基因组扩增测序 real-time PCR检测
下载PDF
Real-time data processing method for CO_(2) dispersion interferometer on EAST
17
作者 张家敏 姚远 +6 位作者 刘郁阳 储宇奇 阮天翼 张耀 刘海庆 揭银先 凌必利 《Plasma Science and Technology》 SCIE EI CAS CSCD 2024年第8期121-126,共6页
A real-time data processing system is designed for the carbon dioxide dispersion interferometer(CO_(2)-DI)on EAST.The system utilizes the parallel and pipelining capabilities of an fieldprogrammable gate array(FPGA)to... A real-time data processing system is designed for the carbon dioxide dispersion interferometer(CO_(2)-DI)on EAST.The system utilizes the parallel and pipelining capabilities of an fieldprogrammable gate array(FPGA)to digitize and process the intensity of signals from the detector.Finally,the real-time electron density signals are exported through a digital-to-analog converter(DAC)module in the form of analog signals.The system has been successfully applied in the CO_(2)-DI system to provide low-latency electron density input to the plasma control system on EAST.Experimental results of the latest campaign with long-pulse discharges on EAST(2022–2023)demonstrate that the system can respond effectively in the case of rapid density changes,proving its reliability and accuracy for future electron density calculation. 展开更多
关键词 dispersion interferometer real-time electron density FPGA EAST
下载PDF
Real-Time Intelligent Diagnosis of Co-frequency Vibration Faults in Rotating Machinery Based on Lightweight-Convolutional Neural Networks
18
作者 Xin Pan Xiancheng Zhang +1 位作者 Zhinong Jiang Guangfu Bin 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2024年第2期264-282,共19页
The co-frequency vibration fault is one of the common faults in the operation of rotating equipment,and realizing the real-time diagnosis of the co-frequency vibration fault is of great significance for monitoring the... The co-frequency vibration fault is one of the common faults in the operation of rotating equipment,and realizing the real-time diagnosis of the co-frequency vibration fault is of great significance for monitoring the health state and carrying out vibration suppression of the equipment.In engineering scenarios,co-frequency vibration faults are highlighted by rotational frequency and are difficult to identify,and existing intelligent methods require more hardware conditions and are exclusively time-consuming.Therefore,Lightweight-convolutional neural networks(LW-CNN)algorithm is proposed in this paper to achieve real-time fault diagnosis.The critical parameters are discussed and verified by simulated and experimental signals for the sliding window data augmentation method.Based on LW-CNN and data augmentation,the real-time intelligent diagnosis of co-frequency is realized.Moreover,a real-time detection method of fault diagnosis algorithm is proposed for data acquisition to fault diagnosis.It is verified by experiments that the LW-CNN and sliding window methods are used with high accuracy and real-time performance. 展开更多
关键词 Co-frequency vibration real-time diagnosis LW-CNN Data augmentation
下载PDF
Integrated strategy for real-time wind power fluctuation mitigation and energy storage system control
19
作者 Yu Zhang Yongkang Zhang Tiezhou Wu 《Global Energy Interconnection》 EI CSCD 2024年第1期71-81,共11页
To address the impact of wind-power fluctuations on the stability of power systems,we propose a comprehensive approach that integrates multiple strategies and methods to enhance the efficiency and reliability of a sys... To address the impact of wind-power fluctuations on the stability of power systems,we propose a comprehensive approach that integrates multiple strategies and methods to enhance the efficiency and reliability of a system.First,we employ a strategy that restricts long-and short-term power output deviations to smoothen wind power fluctuations in real time.Second,we adopt the sliding window instantaneous complete ensemble empirical mode decomposition with adaptive noise(SW-ICEEMDAN)strategy to achieve real-time decomposition of the energy storage power,facilitating internal power distribution within the hybrid energy storage system.Finally,we introduce a rule-based multi-fuzzy control strategy for the secondary adjustment of the initial power allocation commands for different energy storage components.Through simulation validation,we demonstrate that the proposed comprehensive control strategy can smoothen wind power fluctuations in real time and decompose energy storage power.Compared with traditional empirical mode decomposition(EMD),ensemble empirical mode decomposition(EEMD),and complete ensemble empirical mode decomposition with adaptive noise(CEEMDAN)decomposition strategies,the configuration of the energy storage system under the SW-ICEEMDAN control strategy is more optimal.Additionally,the state-of-charge of energy storage components fluctuates within a reasonable range,enhancing the stability of the power system and ensuring the secure operation of the energy storage system. 展开更多
关键词 SW-ICEEMDAN HESS real-time smoothing Rule-based multi-fuzzy control SoC
下载PDF
Nanomaterial-assisted wearable glucose biosensors for noninvasive real-time monitoring:Pioneering point-of-care and beyond
20
作者 Moein Safarkhani Abdullah Aldhaher +5 位作者 Golnaz Heidari Ehsan Nazarzadeh Zare Majid Ebrahimi Warkiani Omid Akhavan YunSuk Huh Navid Rabiee 《Nano Materials Science》 EI CAS CSCD 2024年第3期263-283,共21页
This review explores glucose monitoring and management strategies,emphasizing the need for reliable and userfriendly wearable sensors that are the next generation of sensors for continuous glucose detection.In additio... This review explores glucose monitoring and management strategies,emphasizing the need for reliable and userfriendly wearable sensors that are the next generation of sensors for continuous glucose detection.In addition,examines key strategies for designing glucose sensors that are multi-functional,reliable,and cost-effective in a variety of contexts.The unique features of effective diabetes management technology are highlighted,with a focus on using nano/biosensor devices that can quickly and accurately detect glucose levels in the blood,improving patient treatment and control of potential diabetes-related infections.The potential of next-generation wearable and touch-sensitive nano biomedical sensor engineering designs for providing full control in assessing implantable,continuous glucose monitoring is also explored.The challenges of standardizing drug or insulin delivery doses,low-cost,real-time detection of increased blood sugar levels in diabetics,and early digital health awareness controls for the adverse effects of injectable medication are identified as unmet needs.Also,the market for biosensors is expected to expand significantly due to the rising need for portable diagnostic equipment and an ever-increasing diabetic population.The paper concludes by emphasizing the need for further research and development of glucose biosensors to meet the stringent requirements for sensitivity and specificity imposed by clinical diagnostics while being cost-effective,stable,and durable. 展开更多
关键词 Glucose sensor BIOSENSOR Wearable devices NONINVASIVE real-time monitoring
下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部