Diffusion tensor tractography studies on mechanisms of recovery of injured fornix

The fornix,which connects the medial temporal lobe and the medial diencephalon,is involved in episodic memory as an important part of the Papez circuit.The mechanisms of recovery of an injured fornix revealed by diffusion tensor tractography in the five studies are summarized as follows：1） recovery through the nerve tract from an injured fornical crus to the medial temporal lobe via the normal pathway of the fornical crus;2）recovery through the nerve tract originating from an ipsi-lesional fornical body connected to the ipsi-lesional medial temporal lobe via the splenium of the corpus callosum;3） recovery through the nerve tract from the ipsi-lesional fornical body extending to the contra-lesional medial temporal lobe via the splenium of the corpus callosum;4） recovery through the nerve tract originating from the ipsi-lesional fornical column connected to the ipsi-lesional medial temporal lobe;and 5） recovery through the nerve tract originating from the contra-lesional fornical column connected to the ipsi-lesional medial temporal lobe via the contra-lesional medial temporal lobe and the splenium of the corpus callosum.These diffusion tensor tractography studies on mechanisms of recovery of injured fornical crus appeared to provide useful information for clinicians caring for patients with brain injury,however,studies on this topic are still in the beginning stages.

Hybrid approach for loss recovery mechanism in OBS networks

This letter reports a study of a hybrid burst assembly and a hybrid burst loss recovery scheme （delay-based burst assembly and hybrid loss recovery （DBAHLR）） which selectively employs proactive or reactive loss recovery techniques depending on the classification of traffic into short term and long term, respectively. Traffic prediction and segregation of optical burst switching network flows into the long term and short term are conducted based on predicted link holding times using the hidden Markov model （HMM）. The hybrid burst assembly implemented in DBAHLR uses a consecutive average-based burst assembly to handle jitter reduction necessary in real-time applications, with variations in burst sizes due to the non-monotonic nature of the average delay handled by additional burst length thresholding. This dynamic hybrid approach based on HMM prediction provides overall a lower blocking probability and delay and more throughput when compared with forward segment redundancy mechanism or purely HMM prediction-based adaptive burst sizing and wavelength allocation （HMM-TP）.

DYNAMIC RECOVERY AND DYNAMIC RECRYSTALLIZATION OF 7005 ALUMINIUM ALLOY DURING HOT COMPRESSION

Dynamic recovery and dynamic recrystallizatin behaviors of AA7005 aluminium alloy (Al - Zn - Mg) during hot compression are investigated by isothermal compression testing.The interdependence of flow stress,stress, strain rate,true strain and deformation temperature for the alloy is analyzed by introduc- ing Zener-Hollomon parameter. A steady - state flow of the 7005 alloy is confirmed to be a thermal- ly activated process.which is governed by rate-controlling mechanisms of dislocations.A hyperbolic sine relationship can satisfactorily correlate temperature, strain rate with flow stress through an Arrhe- nius term that involves thermal activation parameters. The dynamic recovery mechanisms of the alloy are discussed.Cross- slip of jogged screw dislocations is the main dynamic recovery mechanism over the deformation temperatures and strain rates.Subgrains are highly developed in the originally elongat- ed grains.The size of the subgrain increases with decrease of the natural logarithm of Zener- Hol - lomon parameter.Local dynamic recrystallization is operative when the alloy is deformed at temperature of 500℃ and strain rate of 0. 001s - 1.

微生物提高原油采收率室内研究进展(英文)

This paper describes a simple, easy process for screening microorganisms, and introduces a laboratory simulation device and process of microbial enhanced oil recovery (MEOR) , which is a necessary research step for trial in oilfields. The MEOR mechanism and the influence of adsorption, diffusion, metabolism, nutrition, porosity, and permeability are analyzed. The research indicates that different microbes have different efficiencies in EOR and that different culture types play different roles in EOR. The effect of syrup is better than that of glucose, and larger porosity is favorable to the reproduction and growth of microbes, thereby improving the oil recovery. Using crude oil as a single carbon source is more appreciable because of the decrease in cost of oil recovery. At the end of this paper, the development of polymerase chain reaction (PCR) for the future is discussed.

Prediction-based protocol for mobile target tracking in wireless sensor networks

Remote tracking for mobile targets is one of the most important applications in wireless sensor networks （WSNs）. A target tracking protoco–exponential distributed predictive tracking （EDPT） is proposed. To reduce energy waste and response time, an improved predictive algorithm–exponential smoothing predictive algorithm （ESPA） is presented. With the aid of an additive proportion and differential （PD） controller, ESPA decreases the system predictive delay effectively. As a recovery mechanism, an optimal searching radius （OSR） algorithm is applied to calculate the optimal radius of the recovery zone. The simulation results validate that the proposed EDPT protocol performes better in terms of track failed ratio, energy waste ratio and enlarged sensing nodes ratio, respectively.

Development and prospect of separated zone oil production technology

This article outlines the development of separated zone oil production in foreign countries,and details its development in China.According to the development process,production needs,technical characteristics and adaptability of oilfields in China,the development of separate zone oil production technology is divided into four stages:flowing well zonal oil production,mechanical recovery and water blocking,hydraulically adjustable zonal oil production,and intelligent zonal production.The principles,construction processes,adaptability,advantages and disadvantages of the technology are introduced in detail.Based on the actual production situation of the oilfields in China at present,three development directions of the technology are proposed.First,the real-time monitoring and adjustment level of separated zone oil production needs to be improved by developing downhole sensor technology and two-way communication technology between ground and downhole and enhancing full life cycle service capability and adaptability to horizontal wells.Second,an integrated platform of zonal oil production and management should be built using a digital artificial lifting system.Third,integration of injection and production should be implemented through large-scale application of zonal oil production and zonal water injection to improve matching and adjustment level between the injection and production parameters,thus making the development adjustment from"lag control"to"real-time optimization"and improving the development effect.

An atmospheric water harvester with fast and energy-saving water removal and recovery

Moisture removal and water recovery from the air are vital for regulating indoor humidity and mitigating water scarcity.Most atmospheric water harvesters(AWH)focus primarily on increasing the moisture capture rate,but for it to be economical and sustainable,it is essential to consider the energy required to recover and harvest the captured water.Here,a mechanically flexible,biphilic sorption-based AWH made of green,environmentally friendly material is presented.It consists of a hygroscopic chitosan polymer embedded within a flexible,hydrophobic silica xerogel that can harvest 86.3 g water/g chitosan at 97%relative humidity and 25℃reaching saturation after 30 days(i.e.2.88 g water/g chitosan/day).Roughly 88%of the sorbed moisture was recovered by mechanical squeezing(ca.0.020 MPa)within 150 s.Repeated water harvesting experiments and uniaxial compression tests demonstrate that chitosan-silica xerogel is durable for longterm operations,providing a fast,reliable,and sustainable moisture removal and water harvesting tool.

Effect of reservoir heterogeneity on air injection performance in a light oil reservoir

Air injection is a good option to development light oil reservoir.As well-known that,reservoir heterogeneity has great effect for various EOR processes.This also applies to air injection.However,oil recovery mechanisms and physical processes for air injection in heterogeneous reservoir with dip angle are still not well understood.The reported setting of reservoir heterogeneous for physical model or simulation model of air injection only simply uses different-layer permeability of porous media.In practice,reservoir heterogeneity follows the principle of geostatistics.How much of contrast in permeability actually challenges the air injection in light oil reservoir?This should be investigated by using layered porous medial settings of the classical Dykstra-Parsons style.Unfortunately,there has been no work addressing this issue for air injection in light oil reservoir.In this paper,Reservoir heterogeneity is quantified based on the use of different reservoir permeability distribution according to classical Dykstra-Parsons coefficients method.The aim of this work is to investigate the effect of reservoir heterogeneity on physical process and production performance of air injection in light oil reservoir through numerical reservoir simulation approach.The basic model is calibrated based on previous study.Total eleven pseudo compounders are included in this model and ten complexity of reactions are proposed to achieve the reaction scheme.Results show that oil recovery factor is decreased with the increasing of reservoir heterogeneity both for air and N2 injection from updip location,which is against the working behavior of air injection from updip location.Reservoir heterogeneity sometimes can act as positive effect to improve sweep efficiency as well as enhance production performance for air injection.High O2 content air injection can benefit oil recovery factor,also lead to early O2 breakthrough in heterogeneous reservoir.Well-type does not show great effect on production performance for air injection in extreme heterogeneous reservoir.While adopting horizontal producer is favourable to promote production performance for air injection in homogenous reservoir.