Activation of adult endogenous neurogenesis by a hyaluronic acid collagen gel containing basic fibroblast growth factor promotes remodeling and functional recovery of the injured cerebral cortex

The presence of endogenous neural stem/progenitor cells in the adult mammalian brain suggests that the central nervous system can be repaired and regenerated after injury.However,whether it is possible to stimulate neurogenesis and reconstruct cortical layers II to VI in non-neurogenic regions,such as the cortex,remains unknown.In this study,we implanted a hyaluronic acid collagen gel loaded with basic fibroblast growth factor into the motor cortex immediately following traumatic injury.Our findings reveal that this gel effectively stimulated the proliferation and migration of endogenous neural stem/progenitor cells,as well as their differentiation into mature and functionally integrated neurons.Importantly,these new neurons reconstructed the architecture of cortical layers II to VI,integrated into the existing neural circuitry,and ultimately led to improved brain function.These findings offer novel insight into potential clinical treatments for traumatic cerebral cortex injuries.

Transplantation of fibrin-thrombin encapsulated human induced neural stem cells promotes functional recovery of spinal cord injury rats through modulation of the microenvironment

Recent studies have mostly focused on engraftment of cells at the lesioned spinal cord,with the expectation that differentiated neurons facilitate recovery.Only a few studies have attempted to use transplanted cells and/or biomaterials as major modulators of the spinal cord injury microenvironment.Here,we aimed to investigate the role of microenvironment modulation by cell graft on functional recovery after spinal cord injury.Induced neural stem cells reprogrammed from human peripheral blood mononuclear cells,and/or thrombin plus fibrinogen,were transplanted into the lesion site of an immunosuppressed rat spinal cord injury model.Basso,Beattie and Bresnahan score,electrophysiological function,and immunofluorescence/histological analyses showed that transplantation facilitates motor and electrophysiological function,reduces lesion volume,and promotes axonal neurofilament expression at the lesion core.Examination of the graft and niche components revealed that although the graft only survived for a relatively short period(up to 15 days),it still had a crucial impact on the microenvironment.Altogether,induced neural stem cells and human fibrin reduced the number of infiltrated immune cells,biased microglia towards a regenerative M2 phenotype,and changed the cytokine expression profile at the lesion site.Graft-induced changes of the microenvironment during the acute and subacute stages might have disrupted the inflammatory cascade chain reactions,which may have exerted a long-term impact on the functional recovery of spinal cord injury rats.

Hydrometallurgical process and recovery of valuable elements for limonitic laterite:A review

Nickel is a strategic resource in social life and defense technology,playing an essential role in many fields,such as alloys and batteries.With the decrease in nickel sulfide,it is of great significance to extract nickel from laterite.The limonitic laterite is a kind of rich nickel-cobalt-scandium resource.At present,there are few reviews on the extraction of limonitic laterite.This study reviews the hydrometallurgical processes for limonitic laterite ores and the methods of recovering valuable elements.The mineralogical characteristics are analyzed,and the typical mineral compositions are summarized.The main hydrometallurgical processes are compared and discussed,including reduction roasting-ammonia leaching,sulfuric acid pressure leaching,nitric acid pressure leaching,and the atmospheric nitric acid leaching(DNi process).The methods of recovering nickel,cobalt,scandium,and iron are emphatically outlined.Finally,reasonable suggestions are proposed for comprehensive utilization.This study can provide a reference for industrial development and diversified applications.

Configuration Synthesis and Grasping Performance Analysis of Multi-Loop Coupling Capture Mechanism for Launch and Recovery of Torpedo-Shaped Autonomous Underwater Vehicle

Research of capture mechanisms with strong capture adaptability and stable grasp is important to solve the problem of launch and recovery of torpedo-shaped autonomous underwater vehicles(AUVs).A multi-loop coupling capture mechanism with strong adaptability and high retraction rate has been proposed for the launch and recovery of torpedo-shaped AUVs with different morphological features.Firstly,the principle of capturing motion retraction is described based on the appearance characteristics of torpedo-shaped AUVs,and the configuration synthesis of the capture mechanism is carried out using the method of constrained chain synthesis.Secondly,the screw theory is employed to analyze the degree of freedom(DoF)of the capture mechanism.Then,the 3D model of the capture mechanism is established,and the kinematics and dynamics simulations are carried out.Combined with the capture orientation requirements of the capture mechanism,the statics and vibration characteristics analyses are carried out.Furthermore,considering the capture process and the underwater working environment,the motion characteristics and hydraulics characteristics of the capture mechanism are analyzed.Finally,a principle prototype is developed and the torpedo-shaped AUVs capture experiment is completed.The work provides technical reserves for the research and development of AUV capture special equipment.

Conditional Generative Adversarial Network Enabled Localized Stress Recovery of Periodic Composites

Structural damage in heterogeneousmaterials typically originates frommicrostructures where stress concentration occurs.Therefore,evaluating the magnitude and location of localized stress distributions within microstructures under external loading is crucial.Repeating unit cells(RUCs)are commonly used to represent microstructural details and homogenize the effective response of composites.This work develops a machine learning-based micromechanics tool to accurately predict the stress distributions of extracted RUCs.The locally exact homogenization theory efficiently generates the microstructural stresses of RUCs with a wide range of parameters,including volume fraction,fiber/matrix property ratio,fiber shapes,and loading direction.Subsequently,the conditional generative adversarial network(cGAN)is employed and constructed as a surrogate model to establish the statistical correlation between these parameters and the corresponding localized stresses.The stresses predicted by cGAN are validated against the remaining true data not used for training,showing good agreement.This work demonstrates that the cGAN-based micromechanics tool effectively captures the local responses of composite RUCs.It can be used for predicting potential crack initiations starting from microstructures and evaluating the effective behavior of periodic composites.

Recovery of alumina from circulating fluidized bed combustion Al-rich fly ash using mild hydrochemical process

To utilize CFBC Al-rich fly ash, a mild hydrochemical extraction process was investigated for recovery of alumina. An alumina extraction efficiency of 92.31%was attained using a 45%NaOH solution, an original caustic ratio （molar ratio of Na2O to Al2O3 in the sodium aluminate solution） of 25, a molar ratio of CaO to SiO2 in the fly ash of 1.1, a liquid volume to solid mass ratio of 9, a reaction temperature of 280 ℃, and a residence time of 1 h when treating fly ash with an alumina to silica mass ratio （A/S） of 0.78 and an alumina content of 32.43%. Additionally, the alumina leaching mechanism was explored via structural and chemical analysis, which revealed that after alkaline digestion, the main solid phase containing silica was NaCaHSiO4 with a theoretical A/S of zero.

Family journey in the process of recovery of schizophrenia:A qualitative study

Objective:The aim of this research is to explore the life experiences of schizophrenic families in accompanying the recovery process.Methods:This study uses a qualitative method with descriptive phenomenology to explain phenomena from family experiences.The number of the participants was eight families who had family members with schizophrenia.Sampling was determined by purposive sampling.Data were collected through in-depth interviews and analyzed using the Colaizzi method.Results:The results of this study show four themes that emerged including(1)psychological burden on the family,(2)families needing support in the recovery process,(3)obstacles due to social stigma,and(4)family gratitude for being able to pass the test patiently.Conclusion:The schizophrenia family’s journey in the recovery process is very long.They are required to endure in assisting the recovery process.Experiences felt by the family include feelings,obstacles,and hopes that arise in carrying out their role to assist the recovery process which aims to improve the health of schizophrenia patients.The findings from this study provide insight for nurses to be able to pay attention to family psychological problems by strengthening families through home visits and health promotion related to the recovery process of survivor schizophrenia.

The Effect of Case Management Model on the Application of Pancreatic Cancer Surgery Patients and the Recovery of Gastrointestinal Function

Objective:To evaluate the effect of the case management model on patients operated for pancreatic cancer.Methods:90 pancreatic cancer surgery patients admitted to the hospital between January 2022 and June 2023 were selected and grouped by randomized numerical table.For 45 cases in the observation group,case management mode was adopted,and for 45 cases in the intervention group,conventional nursing care was chosen to compare the indexes of gastrointestinal function recovery.Results:The recovery time of all gastrointestinal functions of the observation group was shorter than that of the intervention group;after nursing,the psychological state score of the observation group was lower than that of the intervention group,the self-efficacy score was higher than that of the intervention group and the rate of complications was lower than that of the intervention group(P<0.05).Conclusion:The case management model can promote the recovery of gastrointestinal function in patients with pancreatic cancer surgery and its nursing feasibility is high.

Recovery of Transient Signals in Noise by OptimalThresholding in Wavelet Domain

：研究用离散子波变换复原被加性高斯白噪声污染的瞬态信号．在子波域中提出了一种最佳门限方法，该方法涉及到对于波系数的假设检验，利用似然比、奈曼，皮尔逊准则和最小均方差设计该门限，计算机仿真证明，该方法在较低信噪比下复原信号的有效性．

Recovery of Co and Li from spent lithium-ion batteries by combination method of acid leaching and chemical precipitation

Cathode material of spent lithium-ion batteries was refined to obtain high value-added cobalt and lithium products based on the chemical behaviors of metal in different oxidation states. The active substances separated from the cathode of spent lithium-ion batteries were dissolved in H2SO4 and H2O2 solution, and precipitated as CoC2O4·2H2O microparticles by addition of （NH4）2C2O4. After collection of the CoC2O4·2H2O product by filtration, the Li2CO3 precipitates were obtained by addition of Na2CO3 in the left filtrate. The experimental study shows that 96.3% of Co （mass fraction） and 87.5% of Li can be dissolved in the solution of 2 mol/L H2SO4 and 2.0% H2O2 （volume fraction）, and 94.7% of Co and 71.0% of Li can be recovered respectively in the form of CoC2O4·2H2O and Li2CO3.

Recovery of cobalt from converter slag of Chambishi Copper Smelter using reduction smelting process

The reduction smelting process for cobalt recovery from converter slag of the Chambishi Copper Smelter in Zambia was studied. The effects of reducing agent dosage, smelting temperature and time and the addition of slag modifiers （CaO and TiO2） were investigated. In addition, the depleted slag and cobalt-bearing alloy were characterized by X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy. Under the determined conditions, 94.02% Co, 95.76% Cu and less than 18% Fe in the converter slag were recovered. It was found that the main phases of depleted slag were fayalite and hercynite; and the cobalt-bearing alloy mainly contained metallic copper, Fe-Co-Cu alloys and a small amount of sulfide.

Test of the Relative Permeability Curve of a Gas and Oil Condensate System and its Effect on the Recovery of Oil and Gas

The relative permeability curve has been measured with simulation oil (refined oil) and gas (nitrogen or air) at room temperature and a lowpressure, both of which are very important parameters for depicting the flow of fluid through porous media in a hydrocarbon reservoir. This basic measurement is often applied in exploitation evaluation, but the underground conditions with high temperature and pressure, and the phase equilibrium of oil and gas, are not taken into consideration when the relative permeability curve is tested. There is an important theoretical and practical sense in testing the diphase relative permeability curve of the equilibrium of oil and gas under the conditions of high temperature and pressure. The test method for the relative permeability curve is proposed in this paper. The relative permeability of the equilibrium of oil and gas and the standard one are tested in two fluids, and the differences between these two methods are stated. The research results can be applied to the simulation and prediction of CVD in long cores and then the phenomenon can better explain that the recovery of condensate gas rich in condensate oil is higher than that of CVD test in PVT. Meanwhile, the research shows that the relative permeability curve of equilibrium oil and gas is sensitive to the rate of exploitation, and the viewpoint proves that an improved gas recovery rate can properly increase the recovery of condensate oil.

Recovery of titanium from undissolved residue(tionite) in titanium oxide industry via NaOH hydrothermal conversion and H_2SO_4 leaching

To recover titanium from tionite, a new process consisting of NaOH hydrothermal conversion, water washing, and H2SO4 leaching for TiO2 preparation was developed. The experimental results show that under the optimum hydrothermal conversion conditions, i.e., 50% NaOH （mass fraction） solution, NaOH/tionite mass ratio of 4：1, reaction temperature of 240 ℃reaction time of 1 h and oxygen partial pressure of 0.25 MPa, the titanium was mainly converted into Na2TiO3, and the conversion was 97.2%. The unwanted product Na2TiSiO5 remained stable in water washing, and its formation was prevented by improving NaOH concentration. In water washing process, about 97.6% of Na＋ could be recycled by washing the hydrothermal product. The NaOH solutions could be reused after concentration. 96.7% of titanium in the washed product was easily leached in H2SO4 solution at low temperatures, forming titanyl sulfate solution to further prepare TiO2.

Effects of professional rehabilitation training on the recovery of neurological function in young stroke patients

Young stroke patients have a strong desire to return to the society, but few studies have been conducted on their rehabilitation training items, intensity, and prognosis. We analyzed clinical data of young and middle-aged/older stroke patients hospitalized in the Department of Neurological Rehabilitation, China Rehabilitation Research Center, Capital Medical University, China from February 2014 to May 2015. Results demonstrated that hemorrhagic stroke （59.6%） was the primary stroke type found in the young group, while ischemic stroke （60.0%） was the main type detected in the middle-aged/older group. Compared with older stroke patients, education level and incidence of hyperhomocysteinemia were higher in younger stroke patients, whereas, incidences of hypertension, diabetes, and heart disease were lower. The average length of hospital stay was longer in the young group than in the middle-aged/older group. The main risk factors observed in the young stroke patients were hypertension, drinking, smoking, hyperlipidemia, hyperhomocysteinemia, diabetes, previous history of stroke, and heart disease. The most accepted rehabilitation program consisted of physiotherapy, occupational therapy, speech therapy, acupuncture and moxibustion. Average rehabilitation training time was 2.5 hours/day. Barthel Index and modified Rankin Scale scores were increased at discharge. Six months after discharge, the degree of occupational and economic satisfaction declined, and there were no changes in family life satisfaction. The degrees of other life satisfaction （such as friendship） improved. The degree of disability and functional status improved significantly in young stroke patients after professional rehabilitation, but the number of patients who returned to society within 6 months after stroke was still small.

Recovery of a degenerated corticospinal tract after injury in a patient with intracerebral hemorrhage:confirmed by diffusion tensor tractography imaging

The corticospinal tract （CST） is a major neuronal tract of motor function in the human brain （York, 1987; Davidoff, 1990; Jang, 2014）. Recovery of an injured CST is one of the motor recovery mechanisms in stroke patients （Hendricks et al., 2003; Jang et al., 2006, 2007; Swayne et al., 2008; Kwon et al., 2011, 2013; Kwon and Jang, 2012; Yeo and Jang, 2013; Rong et al., 2014）. Diffusion tensor tractography （DTT）, derived from diffusion tensor imaging （DTI）, and transcra- nial magnetic stimulation （TMS） have been widely used in demonstrating the recovery of an injured CST （Hendricks et al., 2003; Jang et al., 2006, 2007; Swayne et al., 2008; Pannek et al., 2009; Kwon et al., 2011, 2013; Kwon and Jang, 2012; Yeo and Jang, 2013; Rong et al., 2014）. DTT has the advan- tage of enabling visualization of the architecture and integ- rity of the CST at the subcortical level in three dimensions （Mori et al., 1999; Kunimatsu et al., 2004）.

Selective recovery of Sn from copper alloy dross and its heat-treatment for synthesis of SnO_2

Preliminary study on concentration and separation of tin(Sn) from copper alloy dross by selective dissolution method was conducted. The tin in the copper alloy dross did not dissolve in an aqueous nitric acid solution which could allow separation of tin from the copper alloy dross. The tin as H2SnO3(metastannic acid) phase was precipitated in the solution with centrifuging process and transformed to tin dioxide(SnO2) after drying process. The dried sample was heat-treated at low temperature and its phase characteristics, surface morphology and chemical composition were investigated.

Recovery of sympathetic nerve function after lumbar sympathectomy is slower in the hind limbs than in the torso

Local sympathetic denervation by surgical sympathectomy is used in the treatment of lower limb ulcers and ischemia,but the restoration of cutaneous sympathetic nerve functions is less clear.This study aims to explore the recovery of cutaneous sympathetic functions after bilateral L2-4 sympathectomy.The skin temperature of the left feet,using a point monitoring thermometer,increased intraoperatively after sympathectomy.The cytoplasm of sympathetic neurons contained tyrosine hydroxylase and dopamineβ-hydroxylase,visualized by immunofluorescence,indicated the accuracy of sympathectomy.Iodine starch test results suggested that the sweating function of the hind feet plantar skin decreased 2 and 7 weeks after lumbar sympathectomy but had recovered by 3 months.Immunofluorescence and western blot assay results revealed that norepinephrine and dopamineβ-hydroxylase expression in the skin from the sacrococcygeal region and hind feet decreased in the sympathectomized group at 2 weeks.Transmission electron microscopy results showed that perinuclear space and axon demyelination in sympathetic cells in the L5 sympathetic trunks were found in the sympathectomized group 3 months after sympathectomy.Although sympathetic denervation occurred in the sacrococcygeal region and hind feet skin 2 weeks after lumbar sympathectomy,the skin functions recovered gradually over 7 weeks to 3 months.In conclusion,sympathetic functional recovery may account for the recurrence of hyperhidrosis after sympathectomy and the normalization of sympathetic nerve trunks after incomplete injury.The recovery of sympathetic nerve function was slower in the limbs than in the torso after bilateral L（2-4） sympathectomy.

PDE5 inhibitors promote recovery of peripheral neuropathy in diabetic mice

Diabetes mellitus affects an estimated 422 million people worldwide.Peripheral neuropathy is one of the most common and disabling complications of diabetes.There is currently no effective treatment for diabetic neuropathy,

Recovery of multiply injured ascending reticular activating systems in a stroke patient

Consciousness is controlled by ular activating system （ARAS）. lower and upper parts between activation of the ascending retic- The ARAS consists mainly of the the thalamus and cerebral cortex （Edlow et al., 2012; Yeo et al., 2013; Jang et al., 2014）. Because the ARAS is composed of several neuronal circuits connecting the brainstem to the cortex. These neuronal connections begin from the reticular formation （RF） of the brainstem and the intralaminar nucleus of thalamus to the cerebral cortex （Gosseroes et al., 2011）. In addition, the ARAS system also includes several brainstem nuclei （such as dorsal raphe, locus coeruleus, pedun-culopontine nucleus, median raphe and parabrachial nucleus）, non-specific thalamic nuclei, hypothalamus, and basal forebrain （Fuller et al., 2011）.

A New Quenching Process and Tower to Improve the Recovery of Acrylonitrile

Quenching process and design of the quenching tower in acrylonitrile production in China were studied in order to decrease the polymerization loss of acrylonitrile in the quenching tower. Based on the research of acrylonitrile polymerization in the quenching tower, a new quenching process was proposed to avoid the disadvantages of the original process. Two kinds of internals were installed to improve the performance of the quenching tower. Through a series of air-flow and real-flow model experiments, the new quenching process and new design were showed to be successful in enhancing the mass and heat transfer in the vapor-liquid system and decreasing the loss of acrylonitrile.Industrial application showed satisfactory results of decrease of the acrylonitrile loss in the quenching tower by about 4.5% and increase of the acrylonitrile recovery of the whole plant by more than 4%.