In order to improve the refining effect of zinc ore and promote the development of this industry,taking the hydrometallurgical zinc smelting process as an example,this paper first establishes a model for the recycling...In order to improve the refining effect of zinc ore and promote the development of this industry,taking the hydrometallurgical zinc smelting process as an example,this paper first establishes a model for the recycling of waste residues in the hydrometallurgical process,proposes optimization measures based on proven comprehensive recycling technology for purifying residues to obtain higher valuable metal recovery rate,and provides reference for those in relevant fields.展开更多
Copper-indium-gallium-diselenide(CIGS)is a fast-evolving commercial solar cell.The firm demand for global carbon reduction and the rise of potential environmental threats necessitate spent CIGS solar cell recycling.In...Copper-indium-gallium-diselenide(CIGS)is a fast-evolving commercial solar cell.The firm demand for global carbon reduction and the rise of potential environmental threats necessitate spent CIGS solar cell recycling.In this paper,the sources and characteristics of valuable metals in spent CIGS solar cells were reviewed.The potential environmental impacts of CIGS,including service life,critical material,and material toxicity,were outlined.The main recovery methods of valuable metals in the various types of spent CIGS,including hydrometallurgy,pyrometallurgy,and comprehensive treatment processes,were compared and discussed.The mechanism of different recovery processes was summarized.The challenges faced by different recycling processes of spent CIGS were also covered in this review.Finally,the economic viability of the recycling process was assessed.The purpose of this review is to provide reasonable suggestions for the sustainable development of CIGS and the harmless disposal of spent CIGS.展开更多
Recycling gas drilling is a new drilling technology. This paper can be divided into three parts, with the purpose of introducing and analyzing the characteristics of this new technology. First, the major equipment cha...Recycling gas drilling is a new drilling technology. This paper can be divided into three parts, with the purpose of introducing and analyzing the characteristics of this new technology. First, the major equipment characteristic of this technology was introduced. Secondly, compared with conventional gas drilling, Angel's model was used to analyze the wellbore flow characteristics. Due to the closed loop and the effect of back pressure caused by the equipment, the gas flow rate decreases dramatically during drilling. Apart from this, it is also found that the kinetic energy at the casing shoe is always smaller than that at the top of the collar. The proposing of the drilling limit concept points out the basic difference between the two gas drilling technologies. Lastly, according to the results of the theoretical analysis, gas supplement operations for the wellbore must be conducted. Thus, two gas supplement schemes are presented in this paper, to provide some guidance for field operations.展开更多
Ternary lithium-ion batteries(LIBs),widely used in new energy vehicles and electronic products,are known for their high en-ergy density,wide operating temperature range,and excellent cycling performance.With the rapid...Ternary lithium-ion batteries(LIBs),widely used in new energy vehicles and electronic products,are known for their high en-ergy density,wide operating temperature range,and excellent cycling performance.With the rapid development of the battery industry,the recycling of spent ternary LIBs has become a hot topic because of their economic value and environmental concerns.To date,a con-siderable amount of literature has reported on the recycling of spent ternary LIBs designed to provide an efficient,economical,and envir-onmentally friendly method for battery recycling.This article examines the latest developments in various technologies for recycling spent ternary LIBs in both research and practical production,including pretreatment,pyrometallurgy,hydrometallurgy,pyro-hydrometallurgy,and direct regeneration.Suggestions for addressing challenges based on the benefits and disadvantages of each method are made.Finally,through a comparison of the feasibility and economic benefits of various technologies,the challenges faced during battery recycling are summarized,and future development directions are proposed.展开更多
The mechanical behavior and failure mechanism of recycled semi-flexible pavement material were investigated by different scales method. The macroscopic mechanical behavior of samples was studied by static and dynamic ...The mechanical behavior and failure mechanism of recycled semi-flexible pavement material were investigated by different scales method. The macroscopic mechanical behavior of samples was studied by static and dynamic splitting tensile tests on mechanics testing system(MTS). The mechanical analysis in micro scale was carried out by material image analysis method and finite element analysis system. The strains of recycled semi-flexible pavement material on samples surface and in each phase materials were obtained. The test results reveal that the performance of recovered asphalt binder was the major determinant on the structural stability of recycled semi-flexible pavement material. The asphalt binder with high viscoelasticity could delay the initial cracking time and reduce the residual strain under cyclic loading conditions. The failure possibility order of each phase in recycled semi-flexible pavement material was asphalt binder, reclaimed aggregate, cement paste and virgin aggregate.展开更多
The porous ceramisites for wastewater treatment were made from red mud, which is the industrial waste discharged from the production of Al2O3. The sintering process and the degreasing experiments with porous ceramisit...The porous ceramisites for wastewater treatment were made from red mud, which is the industrial waste discharged from the production of Al2O3. The sintering process and the degreasing experiments with porous ceramisites have been finished. The results show that the sintering temperature control is dominant for the preparation of the porous ceramisites. The optimal sintering temperature is between 1 110-1120℃, a narrow range. The surface of ceramists is distributed with a lot of coarse holes with diameters of about 1-10μm. Moreover, the sintering temperatures have a great influence on the efficiency of degreasing, and the curve between the sintering temperature and the efficiency ofdegreasing is like a parabola.展开更多
Water manufactured is the primary waste source in the oil and gas industry. Because of the rising amount of waste worldwide, the environmental effect of wastewater has become a primary environmental concern in recent ...Water manufactured is the primary waste source in the oil and gas industry. Because of the rising amount of waste worldwide, the environmental effect of wastewater has become a primary environmental concern in recent years. The vast amounts involved have resulted in considerable costs to the industry for handling produced water. This research explains the wide variety of choices for water management. This research’s first phase was water minimization techniques, consisting of three different applications made in three different wells (Well 1, Well 2 and Well 3) and water recycling and reuse by two techniques. In Well 1, Mechanical shut-off technique was applied using through tubing bridge plug and 5 m cement dumped above it to isolate the watered out zone;as per water oil ration plot the water cut is decreased from 100% to 4% and the production is increased from 0 to 400 bcpd. In Well 2, Chemical shut-off technique using a polymer called Brightwater has been used to block channeling through high permeability intervals after PLT log detected it, and the result was brilliant, the water cut decreased from 60% to 25%, also the oil production increase from 500 to 3000 bopd. In Well 3, downhole separator installed in it using workover (unfortunately, this technique is not applied in middle east till the moment so this application is taken from an oil field in Canada)and the result was perfect, the water cut decreased from 70% to 28%, also the oil production increase from 44 to 100 bopd. This study tried to clarify and compare the most widely used water management techniques using one of the Western Desert (W.D.) (enhanced for oil recovery, constructed wetland).展开更多
Recently,lithium-ion batteries(LIBs),due to their superior performance,have been vastly applied in electronic,auto,and other industries,resulting in the generation of an increasing amount of spent LIBs.What’s worse,L...Recently,lithium-ion batteries(LIBs),due to their superior performance,have been vastly applied in electronic,auto,and other industries,resulting in the generation of an increasing amount of spent LIBs.What’s worse,LIBs contained potentially toxic substances,including heavy metals,toxic and flammable electrolyte containing LiBF_(4),LiClO_(4),and LiPF_(6).Conventional disposal of spent LIBs via landfill or incineration exerts tremendous pressure on the environment.It was necessary to adopt efficient,low-cost,and environmentally friendly approaches to valorizing spent LIBs,which could not only alleviate the shortage of rare resources by recycling valuable ele-ments such as Cu,Li,Mn,Ni,Co,and Al,but also eliminate the pollution of harmful components in batteries and realize the recycling and sustainable industry related to consumer electronics and electric vehicles(EVs).Given this,this paper summarized the recycling technologies of spent LIBs,including pyrometallurgy(melting reduction and roasting methods)and hydrometallurgy(leaching,precipitation,extraction,ion-exchange,elec-trochemical,sol-gel methods),and electrolyte recycling(organic solvent extraction and supercritical extraction methods).Pyrometallurgy technologies had relatively decent metal recovery rates but were associated with high energy consumption and atmospheric emission issues.Hydrometallurgical technologies were more environ-mentally friendly and efficient in recovering spent LIBs,although disposing of the wastewater generated from the process remained a challenge.In addition,the different industrial processes and various countries’related policies of recycling spent LIBs were investigated.In the end,the outlooks and future directions of recycling spent LIBs were proposed.展开更多
For acid pickling heat treated mild steel and steel products, up to the middle of the last century, sulfuric acid was primarily in use, which has been replaced stepwise by hydrochloric acid since the sixties. During t...For acid pickling heat treated mild steel and steel products, up to the middle of the last century, sulfuric acid was primarily in use, which has been replaced stepwise by hydrochloric acid since the sixties. During this time, the pickling of high alloyed steel with hydrofluoric acid or mixtures for hydrofluoric acid together with nitric acid has also been applied on industrial scale. The technologies used by several plant contractors hereby show considerable differences in their engineering. The study provides a survey of the progress in the state of art of regeneration technology as well as the use of different pickl.ing media in the form of a review on existing technologies as well as improvements done within the recent years in the area.展开更多
Urban mining is essential for continued natural resource extraction. The recovery of rare and precious metals (RPMs) from urban mines has attracted increasing attention from both academic and industrial sectors, bec...Urban mining is essential for continued natural resource extraction. The recovery of rare and precious metals (RPMs) from urban mines has attracted increasing attention from both academic and industrial sectors, because of the broad application and high price of RPMs, and their low content in natural ores. This study summarizes the distribution characteristics of various RPMs in urban mines, and the advantages and shortcomings of various technologies for RPM recovery from urban mines, including both conventional (pyrometallurgical, hydrometallurgical, and biometallurgical processing), and emerging (electrochemical, supereritieal fluid, mechanochemical, and ionic liquids processing) technologies. Mechanical/physical technologies are commonly employed to separate RPMs from nonmetallic components in a pre-treatment process. A pyrometallurgical process is often used tbr RPM recovery, although the expensive equipment required has limited its use in small and medium-sized enterprises. Hydrometallurgical processing is effective and easy to operate, with high selectivity of target metals and high recovery efficiency of RPMs, compared to pyrometallurgy. Biometallurgy, though, has shown the most promise for leaching RPMs from urban mines, because of its low cost and environmental friendliness. Newly developed technologies electrochemical, supercritical fluid, ionic liquid, and mechanochemical have offered new choices and achieved some success in laboratory experiments, especially as efficient and environmentally friendly methods of recycling RPMs. With continuing advances in science and technology, more technologies will no doubt be developed in this field, and be able to contribute to the sustainability of RPM mining.展开更多
文摘In order to improve the refining effect of zinc ore and promote the development of this industry,taking the hydrometallurgical zinc smelting process as an example,this paper first establishes a model for the recycling of waste residues in the hydrometallurgical process,proposes optimization measures based on proven comprehensive recycling technology for purifying residues to obtain higher valuable metal recovery rate,and provides reference for those in relevant fields.
基金financially supported by the Beijing Natural Science Foundation of China (No. 2232038)the National Natural Science Foundation of China (Nos. 52034002 and U1802253)the Fundamental Research Funds for the Central Universities (No. FRF-TT-19-001)
文摘Copper-indium-gallium-diselenide(CIGS)is a fast-evolving commercial solar cell.The firm demand for global carbon reduction and the rise of potential environmental threats necessitate spent CIGS solar cell recycling.In this paper,the sources and characteristics of valuable metals in spent CIGS solar cells were reviewed.The potential environmental impacts of CIGS,including service life,critical material,and material toxicity,were outlined.The main recovery methods of valuable metals in the various types of spent CIGS,including hydrometallurgy,pyrometallurgy,and comprehensive treatment processes,were compared and discussed.The mechanism of different recovery processes was summarized.The challenges faced by different recycling processes of spent CIGS were also covered in this review.Finally,the economic viability of the recycling process was assessed.The purpose of this review is to provide reasonable suggestions for the sustainable development of CIGS and the harmless disposal of spent CIGS.
基金financial support from the National Natural Science Foundation of China (50974021)Major Project of Chinese National Programs for Fundamental Research and Development (973 Program:2010CB226704)
文摘Recycling gas drilling is a new drilling technology. This paper can be divided into three parts, with the purpose of introducing and analyzing the characteristics of this new technology. First, the major equipment characteristic of this technology was introduced. Secondly, compared with conventional gas drilling, Angel's model was used to analyze the wellbore flow characteristics. Due to the closed loop and the effect of back pressure caused by the equipment, the gas flow rate decreases dramatically during drilling. Apart from this, it is also found that the kinetic energy at the casing shoe is always smaller than that at the top of the collar. The proposing of the drilling limit concept points out the basic difference between the two gas drilling technologies. Lastly, according to the results of the theoretical analysis, gas supplement operations for the wellbore must be conducted. Thus, two gas supplement schemes are presented in this paper, to provide some guidance for field operations.
基金sponsored by the National Natural Science Foundation of China(Nos.52204412 and U2002212)the National Key R&D Program of China(No.2021YFC 1910504)the Fundamental Research Funds for the Central Universities(No.FRF-TP-20-031A1).
文摘Ternary lithium-ion batteries(LIBs),widely used in new energy vehicles and electronic products,are known for their high en-ergy density,wide operating temperature range,and excellent cycling performance.With the rapid development of the battery industry,the recycling of spent ternary LIBs has become a hot topic because of their economic value and environmental concerns.To date,a con-siderable amount of literature has reported on the recycling of spent ternary LIBs designed to provide an efficient,economical,and envir-onmentally friendly method for battery recycling.This article examines the latest developments in various technologies for recycling spent ternary LIBs in both research and practical production,including pretreatment,pyrometallurgy,hydrometallurgy,pyro-hydrometallurgy,and direct regeneration.Suggestions for addressing challenges based on the benefits and disadvantages of each method are made.Finally,through a comparison of the feasibility and economic benefits of various technologies,the challenges faced during battery recycling are summarized,and future development directions are proposed.
文摘The mechanical behavior and failure mechanism of recycled semi-flexible pavement material were investigated by different scales method. The macroscopic mechanical behavior of samples was studied by static and dynamic splitting tensile tests on mechanics testing system(MTS). The mechanical analysis in micro scale was carried out by material image analysis method and finite element analysis system. The strains of recycled semi-flexible pavement material on samples surface and in each phase materials were obtained. The test results reveal that the performance of recovered asphalt binder was the major determinant on the structural stability of recycled semi-flexible pavement material. The asphalt binder with high viscoelasticity could delay the initial cracking time and reduce the residual strain under cyclic loading conditions. The failure possibility order of each phase in recycled semi-flexible pavement material was asphalt binder, reclaimed aggregate, cement paste and virgin aggregate.
文摘The porous ceramisites for wastewater treatment were made from red mud, which is the industrial waste discharged from the production of Al2O3. The sintering process and the degreasing experiments with porous ceramisites have been finished. The results show that the sintering temperature control is dominant for the preparation of the porous ceramisites. The optimal sintering temperature is between 1 110-1120℃, a narrow range. The surface of ceramists is distributed with a lot of coarse holes with diameters of about 1-10μm. Moreover, the sintering temperatures have a great influence on the efficiency of degreasing, and the curve between the sintering temperature and the efficiency ofdegreasing is like a parabola.
文摘Water manufactured is the primary waste source in the oil and gas industry. Because of the rising amount of waste worldwide, the environmental effect of wastewater has become a primary environmental concern in recent years. The vast amounts involved have resulted in considerable costs to the industry for handling produced water. This research explains the wide variety of choices for water management. This research’s first phase was water minimization techniques, consisting of three different applications made in three different wells (Well 1, Well 2 and Well 3) and water recycling and reuse by two techniques. In Well 1, Mechanical shut-off technique was applied using through tubing bridge plug and 5 m cement dumped above it to isolate the watered out zone;as per water oil ration plot the water cut is decreased from 100% to 4% and the production is increased from 0 to 400 bcpd. In Well 2, Chemical shut-off technique using a polymer called Brightwater has been used to block channeling through high permeability intervals after PLT log detected it, and the result was brilliant, the water cut decreased from 60% to 25%, also the oil production increase from 500 to 3000 bopd. In Well 3, downhole separator installed in it using workover (unfortunately, this technique is not applied in middle east till the moment so this application is taken from an oil field in Canada)and the result was perfect, the water cut decreased from 70% to 28%, also the oil production increase from 44 to 100 bopd. This study tried to clarify and compare the most widely used water management techniques using one of the Western Desert (W.D.) (enhanced for oil recovery, constructed wetland).
文摘Recently,lithium-ion batteries(LIBs),due to their superior performance,have been vastly applied in electronic,auto,and other industries,resulting in the generation of an increasing amount of spent LIBs.What’s worse,LIBs contained potentially toxic substances,including heavy metals,toxic and flammable electrolyte containing LiBF_(4),LiClO_(4),and LiPF_(6).Conventional disposal of spent LIBs via landfill or incineration exerts tremendous pressure on the environment.It was necessary to adopt efficient,low-cost,and environmentally friendly approaches to valorizing spent LIBs,which could not only alleviate the shortage of rare resources by recycling valuable ele-ments such as Cu,Li,Mn,Ni,Co,and Al,but also eliminate the pollution of harmful components in batteries and realize the recycling and sustainable industry related to consumer electronics and electric vehicles(EVs).Given this,this paper summarized the recycling technologies of spent LIBs,including pyrometallurgy(melting reduction and roasting methods)and hydrometallurgy(leaching,precipitation,extraction,ion-exchange,elec-trochemical,sol-gel methods),and electrolyte recycling(organic solvent extraction and supercritical extraction methods).Pyrometallurgy technologies had relatively decent metal recovery rates but were associated with high energy consumption and atmospheric emission issues.Hydrometallurgical technologies were more environ-mentally friendly and efficient in recovering spent LIBs,although disposing of the wastewater generated from the process remained a challenge.In addition,the different industrial processes and various countries’related policies of recycling spent LIBs were investigated.In the end,the outlooks and future directions of recycling spent LIBs were proposed.
文摘For acid pickling heat treated mild steel and steel products, up to the middle of the last century, sulfuric acid was primarily in use, which has been replaced stepwise by hydrochloric acid since the sixties. During this time, the pickling of high alloyed steel with hydrofluoric acid or mixtures for hydrofluoric acid together with nitric acid has also been applied on industrial scale. The technologies used by several plant contractors hereby show considerable differences in their engineering. The study provides a survey of the progress in the state of art of regeneration technology as well as the use of different pickl.ing media in the form of a review on existing technologies as well as improvements done within the recent years in the area.
文摘Urban mining is essential for continued natural resource extraction. The recovery of rare and precious metals (RPMs) from urban mines has attracted increasing attention from both academic and industrial sectors, because of the broad application and high price of RPMs, and their low content in natural ores. This study summarizes the distribution characteristics of various RPMs in urban mines, and the advantages and shortcomings of various technologies for RPM recovery from urban mines, including both conventional (pyrometallurgical, hydrometallurgical, and biometallurgical processing), and emerging (electrochemical, supereritieal fluid, mechanochemical, and ionic liquids processing) technologies. Mechanical/physical technologies are commonly employed to separate RPMs from nonmetallic components in a pre-treatment process. A pyrometallurgical process is often used tbr RPM recovery, although the expensive equipment required has limited its use in small and medium-sized enterprises. Hydrometallurgical processing is effective and easy to operate, with high selectivity of target metals and high recovery efficiency of RPMs, compared to pyrometallurgy. Biometallurgy, though, has shown the most promise for leaching RPMs from urban mines, because of its low cost and environmental friendliness. Newly developed technologies electrochemical, supercritical fluid, ionic liquid, and mechanochemical have offered new choices and achieved some success in laboratory experiments, especially as efficient and environmentally friendly methods of recycling RPMs. With continuing advances in science and technology, more technologies will no doubt be developed in this field, and be able to contribute to the sustainability of RPM mining.