Three-dimensional magnetotelluric regularized inversion based on smoothness-constrained model

How to get the rapid and stable inversion results and reconstruct the clear subsurface resistivity structures is a focus problem in current magnetotelluric inversion. A stable solution of an ill-posed inverse problem was obtained by the regularization methods in which some desired structures were imposed to stabilize the inverse problem. By the smoothness-constrained model and approximate sensitivity method, the stable subsurface resistivity structures were reconstructed. The synthetic examples show that the smoothness-constrained regularized inversion method is effective and can be reasonable to reconstruct three-dimensional subsurface resistivity structures.

Two-dimensional regularized inversion of AMT data based on rotation invariant of Central impedance tensor

Considering the uncertainty of the electrical axis for two-dimensional audo-magnetotelluric(AMT) data processing, an AMT inversion method with the Central impedance tensor was presented. First, we present a calculation expression of the Central impedance tensor in AMT, which can be considered as the arithmetic mean of TE-polarization mode and TM-polarization mode in the twodimensional geo-electrical model. Second, a least-squares iterative inversion algorithm is established, based on a smoothnessconstrained model, and an improved L-curve method is adopted to determine the best regularization parameters. We then test the above inversion method with synthetic data and field data. The test results show that this two-dimensional AMT inversion scheme for the responses of Central impedance is effective and can reconstruct reasonable two-dimensional subsurface resistivity structures. We conclude that the Central impedance tensor is a useful tool for two-dimensional inversion of AMT data.

Application of 2.5D cross-hole electromagnetic inversion in Gudao Oil Field,East China

In this study, we present a practical technique of transforming cross-hole EM data into the inter-well resistivity distribution. The a priori information constraint is incorporated into an iterative regularized inversion procedure and a variable roughness is added into the inversion process. Finite element approximation based on a two and a half-dimensional （2.5D） model has been developed for the forward problem and the ＂pseudo-forward＂ problem needed for constructing the sensitivity matrix and synthetic data set. The regularized least-squares inversion scheme, constrained with the a priori information obtained from well logs, was adopted to reconstruct the inter-well resistivity profile from two synthetic electromagnetic data sets and field data acquired in the Gudao Oil Field, East China. The partial derivatives of the sensitivity matrix were computed by the adjoint equation based on the reciprocity principle. Inversion results of the synthetic and field data examples suggest that our method is robust and stable in the presence of random noise in the field data and can be used for cross-hole EM field data interpretation.

Magnetotelluric extremum boundary inversion based on different stabilizers and its application in a high radioactive waste repository site selection

Geophysical inversion under different stabilizers has different descriptions of the target body boundary,especially in complex geological structures.In this paper,we present an extremum boundary inversion algorithm based on different stabilizers for electrical interface recognition.Firstly,we use the smoothest and minimum-support stabilizing functional to study the applicability of adaptive regularization inversion algorithm.Then,an electrical interface recognition method based on different stabilizers is developed by introducing extremum boundary inversion algorithm.The testing shows that the adaptive regularization inversion method does work for different stabilizers and has a low dependence on the initial models.The ratio of the smooth and focusing upper and lower boundaries obtained using the extremum boundary inversion algorithm can clearly demarcate electrical interfaces.We apply the inversion algorithm to the magnetotelluric(MT)data collected from a preselected area of a high-level-waste clay-rock repository site in the Tamusu area.We recognized regional structures with smooth inversion and the local details with focusing inversion and determined the thickness of the target layer combined with the geological and drilling information,which meets the requirement for the site of the high-level waste clay-rock repository.

Electrical Structure of Wulingshan and Middle Jiangnan Orogen by Three-Dimensional Magnetotelluric Data Inversion

Funded by The National Key Research and Development Program of China,China Deep Exploration(Sinoprobe)and The China Geological Suvery Project on 2009–2019,a large scale magnetotelluric sounding(MT)survey grid(Fig.1)has covered whole south China.

RECONSTRUCTION STABILITY OF NEARFIELD ACOUSTIC HOLOGRAPHY

The distributed source boundary point method （DSBPM） is used as the spatial transform algorithm for realizing nearfield acoustic holography （NAH）, the sensitivity of the reconstructed solution to the measurement errors is analyzed, and the regularization method is proposed to stabilize the reconstruction process, control the influence of the measurement errors and get a better approximate solution. An oscillating sphere is investigated as a numerical example, the influence of the measurement errors on the reconstruction solution is demonstrated, and the feasibility and validity of the regularization method are validated. Key words： Acoustic holography Boundary point method Inverse problem Regularization

Gas emission source term estimation with 1-step nonlinear partial swarm optimization-Tikhonov regularization hybrid method

Source term identification is very important for the contaminant gas emission event. Thus, it is necessary to study the source parameter estimation method with high computation efficiency, high estimation accuracy and reasonable confidence interval. Tikhonov regularization method is a potential good tool to identify the source parameters. However, it is invalid for nonlinear inverse problem like gas emission process. 2-step nonlinear and linear PSO （partial swarm optimization）-Tikhonov regularization method proposed previously have estimated the emission source parameters successfully. But there are still some problems in computation efficiency and confidence interval. Hence, a new 1-step nonlinear method combined Tikhonov regularizafion and PSO algorithm with nonlinear forward dispersion model was proposed. First, the method was tested with simulation and experiment cases. The test results showed that 1-step nonlinear hybrid method is able to estimate multiple source parameters with reasonable confidence interval. Then, the estimation performances of different methods were compared with different cases. The estimation values with 1-step nonlinear method were close to that with 2-step nonlinear and linear PSO-Tikhonov regularization method, 1-step nonlinear method even performs better than other two methods in some cases, especially for source strength and downwind distance estimation. Compared with 2-step nonlinear method, 1-step method has higher computation efficiency. On the other hand, the confidence intervals with the method proposed in this paper seem more reasonable than that with other two methods. Finally, single PSO algorithm was compared with 1-step nonlinear PSO-Tikhonov hybrid regularization method. The results showed that the skill scores of 1-step nonlinear hybrid method to estimate source parameters were close to that of single PSO method and even better in some cases. One more important property of 1-step nonlinear PSO-Tikhonov regularization method is its reasonable confidence interval, which is not obtained by single PSO algorithm. Therefore, 1-step nonlinear hybrid regularization method proposed in this paper is a potential good method to estimate contaminant gas emission source term.

Undersea Buried Pipeline Reconstruction Based on the Level Set and Inverse Multiquadric Regularization Method

The electric inversion technique reconstructs the subsurface medium distribution from acquired data.On the basis of electric inversion,objects buried under the earth or seabed,such as pipelines and unexploded ordnance,are detected and located in a contactless manner.However,the process of accurately reconstructing the shape of the target object is challenging because electric inversion is a nonlinear and ill-posed problem.In this work,we present an inverse multiquadric(IMQ)regularization method based on the level set function for reconstructing buried pipelines.In the case of locating underwater objects,the unknown inversion area is split into two parts,the background and the pipeline with known conductivity.The geometry of the pipeline is represented based on the level set function for achieving a noiseless inversion image.To obtain a binary image,the IMQ is used as the regularization term,which‘pushes’the level set function away from 0.We also provide an appropriate method to select the bandwidth and regularization parameters for the IMQ regularization term,resulting in reconstructed images with sharp edges.The simulation results and analysis show that the proposed method performs better than classical inversion methods.

A Regularization Method for Approximating the Inverse Laplace Transform

A new method for approximating the inerse Laplace transform is presented. We first change our Laplace transform equation into a convolution type integral equation, where Tikhonov regularization techniques and the Fourier transformation are easily applied. We finally obtain a regularized approximation to the inverse Laplace transform as finite sum

BIOLUMINESCENCE TOMOGRAPHY:BIOMEDICAL BACKGROUND,MATHEMATICAL THEORY,AND NUMERICAL APPROXIMATION

Over the last couple of years molecular imaging has been rapidly developed to study physiological and pathological processes in vivo at the cellular and molecular levels. Among molecular imaging modalities, optical imaging stands out for its unique advantages, especially performance and cost-effectiveness. Bioluminescence tomography （BLT） is an emerging optical imaging mode with promising biomedical advantages. In this survey paper, we explain the biomedical significance of BLT, summarize theoretical results on the analysis and numerical solution of a diffusion based BLT model, and comment on a few extensions for the study of BLT.