The effect of Ti and Zr content on the structure,mechanics and energy-release characteristics of Ti—Zr—Ta alloys

Energetic structural materials(ESMs)are a new type of structural materials with bearing and damage characteristics.In this work the microstructure,mechanical properties and energy release characteristics of multi-element Ti-Zr-Ta alloys with good casting performance were studied.The microstructure of the Ti_(x)ZrTa alloys gradually change from BCC+HCP to single BCC structure with the increase of Ti.While the Ti_(2)Zr_(y)Ta alloys was still uniform and single BCC structure with the increase of Zr.The evolution of microstructure and composition then greatly affect the mechanical properties and energy-release characteristics of Ti-Zr-Ta alloys.The synergistic effect of dual phase structure increases the fracture strain of Ti_(x)ZrTa(x=0.2,0.5)with the Ti content decreases,while the fracture strain of Ti_(x)ZrTa(x=2.0,3.0,4.0)gradually increase with the Ti content increases caused by the annihilation of the obstacles for dislocation movement.And as Zr content increases,the fracture strain of Ti_(2)Zr_(y)Ta alloys decrease,then the oxidation reaction rate and fragmentation degree gradually increase.The higher oxidation rate and the lager exposed oxidation area jointly leads the higher releasing energy efficiency of Ti_(x)ZrTa alloys with low Ti content and Ti_(2)Zr_(y)Ta alloys with high Zr content.

Nutrient Release Characteristics of Vinyl Chloride-Vinyl acetate Copolymers Coated SlowRelease Nitrogen Fertilizer and Its Effect on Soil Mineral Nitrogen

[Objective] The aim was to explore release characteristics of vinyl chlo- ride-vinyl acetate copolymer controlled-release N fertilizer and the effects on minerat nitrogen in soils. [Method] Vinyl chloride-vinyl acetate copolymer and hydroxyl-modi- fied VCNAc were taken as coating materials to prepare slow release fertilizer. Nutri- ent release characteristics of VC/VAc slow release fertilizer was evaluated by water immersion method and the effects of VC/VAc slow release fertilizer on mineral ni- trogen were researched by pot experiment. [Result] The release periods of VC-VAc controlled-release urea and hydroxyl-modified VC/VAc coated urea were 60 and 50 d, respectively. Furthermore, the content of ammonium nitrogen reached the peak on the 30th d and the content of nitrate nitrogen reached the peak on the 60th d in soils in treatments with VCNAc and hydroxyl-modified VC/VAc; the content of nitrate nitrogen rose again on the 120th d in the treatment with VC/VAc. In terms of wheat yield, different treatments showed insignificant differences and rice yield in the treatment with VCNAc was significantly higher than that in the treatment with hy- droxyl-modified VCNAc （P〈0.05）. [Conclusion] The release days of slow controlled- release fertilizer vary upon pot experiment method and water immersion method. Slow controlled-release fertilizer is not suitable for monoculture, due to long fertilizer efficiency, but multiple cropping would be optimal for its role to be fully exploited.

Study on energy release characteristics of reactive material casings under explosive loading

Reactive Materials(RMs),a new material with structural and energy release characteristics under shockinduced chemical reactions,are promising in extensive applications in national defense and military fields.They can increase the lethality of warheads due to their dual functionality.This paper focuses on the energy release characteristics of RM casings prepared by alloy melting and casting process under explosive loading.Explosion experiments of RM and conventional 2A12 aluminum alloy casings were conducted in free field to capture the explosive fireballs,temperature distribution,peak overpressure of the air shock wave and the fracture morphology of fragments of reactive material(RM)warhead casings by using high-speed camera,infrared thermal imager temperature and peak overpressure testing and scanning electron microscope.Results showed that an increase of both the fireball temperature and air shock wave were observed in all RM casings compared to conventional 2A12 aluminum ally casings.The RM casings can improve the peak overpressure of the air shock wave under explosion loading,though the results are different with different charge ratios.According to the energy release characteristics of the RM,increasing the thickness of RM casings will increase the peak overpressure of the near-field air shock wave,while reducing the thickness will increase the peak overpressure of the far-field air shock wave.

Release characteristics and stabilization of heavy metals in antimony tailings in Yunnan Province,China

The pollution caused by the mining and smelting of heavy metals is becoming an increasingly severe environmental problem.In this study,the environmental risks of mine tailings were explored using typical antimony tailings(the depth of the sample taken from the ground to the deepest position of 120 cm)from the Zuoxiguo mine in Yunnan Province,Southwest China.The tailings were examined to explore the geological background,distribution characteristics,and release characteristics of heavy metals.Additionally,stabilizer treatments for heavy metals were investigated in consideration of waste treatment.The results showed that the contents of Sb and As(8.93×103 and 425 mg/kg,respectively)in the tailings were considerably higher than the local soil background values,suggesting that these metals pose a considerable threat to the surrounding environment.The geological background values of Cr,Cd,Pb,Cu,and Zn were relatively low.The results of static release showed that Sb,As,Cd,and Cr leached from the tailings more easily than Cu,Zn,and Pb under acidic conditions(pH=2.98).Geo-accumulation indices and potential ecological risk indices showed that Sb,As,Cd,and Pb were highly enriched in the tailings,whereas Cu,Cr,and Zn contents were relatively low.The single factor ecological risk index of the mining area showed that Sb and As are high ecological risk factors,whereas Cr,Cu,Zn,Cd,and Pb are not.The results of the orthogonal test results showed that by adding 15.0%(m/m)fly ash and 15.0%(m/m)zeolite powder to the quicklime and curing for 28 d,a significant stabilization effect was observed for Sb,As,and Pb.This study helps determine the priority control components for characteristic heavy metals in antimony tailings,and provides valuable insights regarding the formulation of appropriate mitigation strategies.

Energy release characteristics of PTFE/Al/TiH_(2) reactive jet with different TiH_2 content

Titanium hydride(TiH_(2)), a promising high-energy additive, is doped into PTFE/Al to optimize the energy output structure of the reactive jet and strive for better aftereffect damage ability to the target. Six types of PTFE/Al/TiH_(2) reactive liners with different TiH_(2) content are prepared by the molding and sintering method. The energy release characteristics of PTFE/Al/TiH_(2) reactive jet are tested by the transient explosion energy test, and are characterized from pressure and temperature. The reaction delay time,pressure history, and temperature history of the energy release process are obtained, then the actual value of released energy and reaction efficiency of the reactive jet are calculated. The results show that the peak pressure and temperature of the PTFE/Al/TiH_(2) jet initially increase and then decrease with increasing TiH_(2) content. When the TiH_(2) content is 10%, the actual value of released energy and reaction efficiency increased by 24% and 6.4%, respectively, compared to the PTFE/Al jet. The reaction duration of the reactive material is significantly prolonged as the TiH_(2) content increased from 0% to 30%. Finally,combined with the energy release behaviors of PAT material and the dynamic deformation process of liner, the enhancement mechanism of TiH_(2) on energy release of the reactive jet is expounded.

Gas release characteristics during carbonization of iron coke hot briquette and influence of heating rate

The release characteristics of CH_(4),H_(2),CO and CO_(2) from iron coke hot briquette(ICHB)during carbonization were studied.The results show that compared with briquette without iron ore,Fe_(3)O_(4) can inhibit the release rate of H2 and promote the production of CO and CO_(2).In addition,when the heating rate increases from 3 to 7℃/min,the release rates of CH4 and H2 increase,while the release rates of CO and CO_(2) first increase and then decrease.The carbonization process of ICHB was segmented,and corresponding kinetic analysis was carried out.The results show that the activation energy of StageⅡand StageⅣis higher in the carbonization process of ICHB,and the active pyrolysis of coal and the reduction of iron ore occur in these two stages.In addition,the effect of heating rate on the kinetic parameters of ICHB carbonization process was investigated.It was found that when the heating rate increased,the reaction activation energy of StageⅣdecreased first and then increased,which was consistent with the release law of CO and CO_(2).The analysis showed that the increase in heating rate leads to more reactions at higher temperatures,resulting in an increase in the release rate of some gases.In addition,thermal hysteresis can also cause some processes to fail to fully react at the end of heating.It is also found that the apparent activation energy and preexponential factor have kinetic compensation effect during the car-bonization of ICHB.

Study on Characteristics of Decomposition and Nutrients Release of Two Kinds of Green Manure Crops

With nylon mesh bags, the decomposition and nutrients release characteristics of two kinds of green manure crops, February orchid （Orychophragmus violaceus） and Hair Vetch （Vicia villosa Roth）, were investigated in this study. The results showed that these two kinds of green manure crops were decomposed rapidly in the first 14 days, and then decomposed slowly. After 80 days of incubation, the decomposition rates of February orchid and Hair Vetch were 66.92% and 63.12%, respectively. Different nutrients had different release rates from the green manures. Nitrogen （N） and potassium （K） were released rapidly in the initial 7 days, and phosphorus （P） was released steadily in the 80 days of incubation. In the two kinds of green manures, the release rates all ranked as K＇s〉N＇s〉P＇s. The release rates of nutrients, especially P （P〈0.05）, of February orchid were higher than those of Hair Vetch.

Initial carbon release characteristics, mechanisms and denitrification performance of a novel slow release carbon source

External carbon source addition is one of the effective methods for the treatment of wastewater with low carbon to nitrogen ratio(C/N). Compared with fast-release liquid carbon sources, slow-release solid carbon sources are more suitable for the denitrification process. A novel slow-release solid carbon source(corncob-polyvinyl alcohol sodium alginatepoly-caprolactone, i.e. CPSP) was prepared using corn cob(CC) and poly-caprolactone with polyvinyl alcohol sodium alginate as hybrid scaffold. The physical properties and carbon release characteristics of CPSP and three other carbon sources were compared. CPSP had stable framework and good carbon release performance, which followed the second order release equation. The formic acid, acetic acid, propionic acid and butyric acid released from CPSP accounted for 8.27% ± 1.66 %, 56.48% ± 3.71 %, 18.46% ± 2.69% and 16.79% ± 3.02% of the total released acids respectively. The start-up period of CPSP was shorter than that of the other carbon sources in denitrification experiment, and no COD pollution was observed in the start-up phase(25–72 h) and stable phase(73–240 hr). The composition and structure of the dissolved organic compounds released by CPSP and other carbon sources were analyzed by UV-Vis absorption spectroscopy and three-dimensional fluorescence spectroscopy,which indicated that CPSP was more suitable for denitrification than the other studied carbon sources.

The Production of Organic-Inorganic Compound Film-Coated Urea and the Characteristics of Its Nutrient Release

The effect of different concentrations of natural macromolecular compound on the characteristics of nutrient release in the membrane materials of organic-inorganic compound film-coated urea was discussed, and the optimal concentrations for better nutrient release was proposed. The characteristics of nutrient release of film-coated urea were evaluated by soil column leaching experiment. Organic-inorganic compound film-coated urea showed good characteristics of nutrient release, which could be well simulated by Logistic curve. The two parameters in this curve, a and r, can be used to present nutrient release of film-coated urea, and followed the order of B 〉 C 〉 A and C 〈 B 〈 A, respectively, indicating that the release was stronger with the increasing concentration of natural macromolecular compound in the membrane, which implied better controllability of nutrient release. The concentration of 5% of natural macromolecular compound showed better characteristic of nutrient release and can be utilized as a membrane material combined with inorganic mineral powders to develop film-coated slow-release fertilizer.

Influence of quick release valve on braking performance and coupler force of heavy haul train

We establish a simulation model based on the theory of air flow to analyze the accelerated release effect of the quick release valve inside the air brake control valve.In addition, the combined simulation system of train air brake system and longitudinal train dynamics is used to analyze how the parameters of the quick release valve in the 120/120–1 brake control valve affect the propagation characteristics of the train brake pipe pressure wave, the release action range of the accelerated brake, and the longitudinal coupler force for a 20,000-ton heavy haul train on the section of the Datong–Qinhuangdao Railway. The results show that the quick release valve can effectively accelerate the rising speed of the train brake pipe pressure during the initial release, as the accelerated release effect is evident before the train brake pipe pressure reaches582 k Pa. The quick release valve can effectively accelerate the release of the rear cars, reducing the longitudinal coupler force impact due to time delay of the release process. The quick release valve can effectively reduce the tensile coupler force in the train by as much as 20% in certain cases.

Relationships between Potential Risk of Hazardous Material Releases and Socio-Economic Demographic Characteristics Using Geospatial Analysis

The problem investigated in this research is about the potential risk of technological hazards, which poses a perilous threat to humankind and the environment. Rapid urbanization has been increasing the population density in an area, elevating the risk of exposure to technological disasters. Therefore, it is necessary to detect the areas with higher chemical risk to spread awareness about the potential risk zones and reduce actual damage and casualties resulting from the hazardous substance events. The basic design of the study utilizes geospatial analysis to map the TRI (Toxics Release Inventory) facilities in the communities of Texas to establish a relationship between potential hazardous material release zones and the human population at risk. The study identified the vulnerable counties as well as investigated how those risk areas are related to race/ethnicity, income and education. The research would contribute to the policymakers acting on the hazard situation and keep them better prepared for chemical hazards. In addition, it would help the residents and emergency managers to better understand the circumstance to mitigate the consequences as well as increase their awareness to be ready for the uncertainties in the hotspots involved in high risk of the hazards.

Effects of different types of slow-and controlled-release fertilizers on rice yield

This experiment explored the effects of single application of seven types of slow-and controlled-release fertilizers on rice yield and various population characteristics.Based on a study of the nitrogen(N)release characteristics of these fertilizers,pot experiments were conducted in 2018 and 2019 with split fertilization(CK,urea applied split equally at basal and panicle initiation stages,respectively)as control,which assessed the effects on SPAD value,yield and yield components,dynamic changes of rice tillers and dry matter accumulation.The results showed that the N release characteristics of different types of slow-and controlled-release fertilizers were significantly different.Polymer-coated urea(PCU)showed a controlledrelease mode and provided sustained release throughout the whole growth stages.Sulfur-coated urea(SCU)exhibited a slow-release mode,providing insufficient release at the middle and late stages.Urease inhibitor urea(AHA)and ureaformaldehyde(UF)yielded a rapid-release mode,with an explosive N release at the early stage and no release at the middle and late stages.These results showed that PCU delayed the peak seedling stage.Compared with CK,dry matter accumulation and SPAD showed no significant differences,and due to the continuous release of N throughout the growth stages,rice yield,spikelets per panicle,seed setting rate,and 1000-grain weight were all increased.Owing to the lack of N supply at the late stage and the low number of spikelets,SCU led to a reduction of rice yield,which is nevertheless not statistically significant.AHA and UF were susceptible to environmental factors and had varying effects on rice yield.The results of this experiment indicated that given a fixed amount of N applied in a pot,the stronger the N supply capacity and the longer the effective duration time of the fertilizer,the higher the dry matter accumulation at the late growth stage,and the higher the rice yield.

General Situation of Green Manure Germplasm Resources in China and Research Progress on Decomposition Characteristics and Fertility Improvement of Green Manures

As a kind of biological fertilizer sources, green manure can improve soil fertility and the quality of agricultural products. This paper introduced the germplasm resource of green manures in the major provinces in China, mainly summarized the characteristics of decomposition and nutrients release of returning green manures to soils, as well as the influence on soil fertility and succeeding crops, with the aim to provide references for rational utilization of green manures and the scientific management of farmland nutrients.

Analysis of NO_X Emission Characteristics of Pulverized Coal Combustion in Different Atmosphere

Researches on the NOx emission characteristics of HT （Huangtai coal）, LC（Laicheng） coal are carried out in different atmosphere. The results show that the NOx emission time is postponed in O2/N2 atmosphere mixed with CO. The releasing times of volatile nitrogen and char nitrogen approach, the amount of NOx reduces. In high 02 concentration atmosphere mixed with CO2, the nitrogen releasing times cane ahead of time, NOx congregate in the beginning of the combustion. On the contrary, nitrogen releases separately, and the amount of NOx reduces greatly.