The strategy on repair and strengthening of existing bridges based on time-dependent reliability was analyzed with the maximum expected benefit as the objective function. A sample of risk-ranking decision was illustra...The strategy on repair and strengthening of existing bridges based on time-dependent reliability was analyzed with the maximum expected benefit as the objective function. A sample of risk-ranking decision was illustrated based on updated inspection information with 35 survival age. The effect of improvement of live loads and difference of repair methods on time-dependent reliability of existing bridges are considered. The results show that the decision method can be used in real project, with the cost of failure consequence and the risk of failure considered.展开更多
In this study, a work-of-fracture method using a three-point bend beam （3PBB） specimen, which is commonly used to determine the fracture energy of concrete, was adapted to evaluate the mode-I fracture and durability...In this study, a work-of-fracture method using a three-point bend beam （3PBB） specimen, which is commonly used to determine the fracture energy of concrete, was adapted to evaluate the mode-I fracture and durability of fiber-reinforced polymer （FRP） composite-concrete bonded interfaces. Interface fracture properties were evaluated with established data reduction procedures. The proposed test method is primarily for use in evaluating the effects of freeze-thaw （F-T） and wet-dry （W-D） cycles that are the accelerated aging protocols on the mode-I fracture of carbon FRP-concrete bonded interfaces. The results of the mode-I fracture tests of F-T and W-D cycle-conditioned specimens show that both the critical load and fracture energy decrease as the number of cycles increases, and their degradation pattern has a nearly linear relationship with the number of cycles. However, compared with the effect of the F-T cycles, the critical load and fracture energy degrade at a slower rate with W-D cycles, which suggests that F-T cyclic conditioning causes more deterioration of carbon fiber-reinforced polymer （CFRP）-concrete bonded interface. After 50 and 100 conditioning cycles, scaling of concrete was observed in all the specimens subjected to F-T cycles, but not in those subjected to W-D cycles. The examination of interface fracture surfaces along the bonded interfaces with varying numbers of F-T and W-D conditioning cycles shows that （1） cohesive failure of CFRP composites is not observed in all fractured surfaces; （2） for the control specimens that have not been exposed to any conditioning cycles, the majority of interface failure is a result of cohesive fracture of concrete （peeling of concrete from the concrete substrate）, which means that the cracks mostly propagate within the concrete; and （3） as the number of F-T or W-D conditioning cycles increases, adhesive failure along the interface begins to emerge and gradually increases. It is thus concluded that the fracture properties （i.e., the critical load and fracture energy） of the bonded interface are controlled primarily by the concrete cohesive fracture before conditioning and by the adhesive interface fracture after many cycles of F-T or W-D conditioning. As demonstrated in this study, a test method using 3PBB specimens combined with a fictitious crack model and experimental conditioning protocols for durability can be used as an effective qualification method to test new hybrid material interface bonds and to evaluate durability-related effects on the interfaces.展开更多
Abstract An optimal maintenance program is the key to making appropriate decisions to minimize cost and maintain an appropriate lev- el of safety. In this paper, the strategy on repairing and strengthening of existing...Abstract An optimal maintenance program is the key to making appropriate decisions to minimize cost and maintain an appropriate lev- el of safety. In this paper, the strategy on repairing and strengthening of existing bridges based on time-dependent reliability was analyzed with the maximum expected benefit as the objective function. Risk ranking and lifecycle cost analysis were considered in the reliability-based bridge assessment. A practical application of risk-ranking decision was illustrated herein based on updated inspection informarion with the bridge at survival age 35. The effects of improvement of live load and difference of repair methods on time-dependent reliability of existing bridges were studied. The decision method can be used in real projects, with the cost of failure consequence and the risk of failure considered.展开更多
基金TheLiaoningProviceCommunicationDe partmentKeyScienceFoundation (No .0 10 1)
文摘The strategy on repair and strengthening of existing bridges based on time-dependent reliability was analyzed with the maximum expected benefit as the objective function. A sample of risk-ranking decision was illustrated based on updated inspection information with 35 survival age. The effect of improvement of live loads and difference of repair methods on time-dependent reliability of existing bridges are considered. The results show that the decision method can be used in real project, with the cost of failure consequence and the risk of failure considered.
基金partially supported by the National Science Foundation(Grant No.CMS-0002829)
文摘In this study, a work-of-fracture method using a three-point bend beam （3PBB） specimen, which is commonly used to determine the fracture energy of concrete, was adapted to evaluate the mode-I fracture and durability of fiber-reinforced polymer （FRP） composite-concrete bonded interfaces. Interface fracture properties were evaluated with established data reduction procedures. The proposed test method is primarily for use in evaluating the effects of freeze-thaw （F-T） and wet-dry （W-D） cycles that are the accelerated aging protocols on the mode-I fracture of carbon FRP-concrete bonded interfaces. The results of the mode-I fracture tests of F-T and W-D cycle-conditioned specimens show that both the critical load and fracture energy decrease as the number of cycles increases, and their degradation pattern has a nearly linear relationship with the number of cycles. However, compared with the effect of the F-T cycles, the critical load and fracture energy degrade at a slower rate with W-D cycles, which suggests that F-T cyclic conditioning causes more deterioration of carbon fiber-reinforced polymer （CFRP）-concrete bonded interface. After 50 and 100 conditioning cycles, scaling of concrete was observed in all the specimens subjected to F-T cycles, but not in those subjected to W-D cycles. The examination of interface fracture surfaces along the bonded interfaces with varying numbers of F-T and W-D conditioning cycles shows that （1） cohesive failure of CFRP composites is not observed in all fractured surfaces; （2） for the control specimens that have not been exposed to any conditioning cycles, the majority of interface failure is a result of cohesive fracture of concrete （peeling of concrete from the concrete substrate）, which means that the cracks mostly propagate within the concrete; and （3） as the number of F-T or W-D conditioning cycles increases, adhesive failure along the interface begins to emerge and gradually increases. It is thus concluded that the fracture properties （i.e., the critical load and fracture energy） of the bonded interface are controlled primarily by the concrete cohesive fracture before conditioning and by the adhesive interface fracture after many cycles of F-T or W-D conditioning. As demonstrated in this study, a test method using 3PBB specimens combined with a fictitious crack model and experimental conditioning protocols for durability can be used as an effective qualification method to test new hybrid material interface bonds and to evaluate durability-related effects on the interfaces.
文摘Abstract An optimal maintenance program is the key to making appropriate decisions to minimize cost and maintain an appropriate lev- el of safety. In this paper, the strategy on repairing and strengthening of existing bridges based on time-dependent reliability was analyzed with the maximum expected benefit as the objective function. Risk ranking and lifecycle cost analysis were considered in the reliability-based bridge assessment. A practical application of risk-ranking decision was illustrated herein based on updated inspection informarion with the bridge at survival age 35. The effects of improvement of live load and difference of repair methods on time-dependent reliability of existing bridges were studied. The decision method can be used in real projects, with the cost of failure consequence and the risk of failure considered.
