The research achievements of solidification theories and technologies in the last decades are reviewed with the stresses on some new development in the recent years. Some new interesting areas emerged in the last year...The research achievements of solidification theories and technologies in the last decades are reviewed with the stresses on some new development in the recent years. Some new interesting areas emerged in the last years are also pointed out.展开更多
Main performance of the cement grouting materials made up by Portland cement（PC） and sulphoaluminate cement（SAC） was investigated in this program, a kind of expanding agent（EA） which was mainly constituted by me...Main performance of the cement grouting materials made up by Portland cement（PC） and sulphoaluminate cement（SAC） was investigated in this program, a kind of expanding agent（EA） which was mainly constituted by metakaolin and alunite was utilized for the compensation of the shrinkage, the hydration products and micro structure of the grouting materials were researched by X-ray diffraction（XRD） and scanning electron microscopy（SEM）. The results showed that a high expansion rate of the grouting materials could be reached as the expanding agent mixed in 6% of PC mass; the addition of SAC in the S2（PC：SAC：EA=34：6：2.25） brought a further improvement of the expansion rate of the grouting materials, the analysis of XRD and SEM showed that due to the reaction of expanding agent and SAC in the grouting materials, more ettringite crystal was generated, which resulted in a higher early strength, the addition of SAC played an expansion and strength reinforcement role in the grouting materials.展开更多
A dvanced Metallic Materials Research and Processing Technology Center was found in December 1998. As a unit under The College of Mechanical Engineering, the Center is an expansion of the former Cast and Composite Mat...A dvanced Metallic Materials Research and Processing Technology Center was found in December 1998. As a unit under The College of Mechanical Engineering, the Center is an expansion of the former Cast and Composite Materials Research Group, which was found in the early eighties of last century. The Center is focusing in the basic and applied research, and development of advanced metallic materials and their processing technology. It also functions as an organization展开更多
The full name of CISRI is Central Iron&Steel Research Institute under the Ministry of Metallurgical Industry in China.It is the largest institute of metallurgical process research in China(the word"large"...The full name of CISRI is Central Iron&Steel Research Institute under the Ministry of Metallurgical Industry in China.It is the largest institute of metallurgical process research in China(the word"large"here refers to various fields,large personnel and many research projects).It includes ironmaking,steel-making,cold and hot processing of steel,metallic product,ferroalloy,refractory,automatic metallurgy control,design展开更多
in this paper, an experimental research the effect of ablating material on the reflection and the transmission of microwaves in arc-heated plasma flow is presented by using the C band microwave measuring system. The ...in this paper, an experimental research the effect of ablating material on the reflection and the transmission of microwaves in arc-heated plasma flow is presented by using the C band microwave measuring system. The results show that the ablating material with accidented surface and its high temperature have remarkably affected the reflection and the transmission of microwaves. The experiment proves that the system has outstanding precision and reliability.展开更多
At the end of 2001 National Natural Science Foundation of China (NSFC) organized a laboratory evaluation for Creative Research Groups, a pilot program launched in 2000, in the northwestern area of China and the evalua...At the end of 2001 National Natural Science Foundation of China (NSFC) organized a laboratory evaluation for Creative Research Groups, a pilot program launched in 2000, in the northwestern area of China and the evaluating team was deeply impressed by a young group, around 30 of average age, with their work and achievements, with their effort in pursuit of scientific truth and with their teamwork spirits. They all acknowl-展开更多
A measurement scheme carried out in a tank is designed to obtain the compressionaland shear-wave velocities of a large elastic material.A hydrophone is used to receive the high frequency acoustic signals which penetra...A measurement scheme carried out in a tank is designed to obtain the compressionaland shear-wave velocities of a large elastic material.A hydrophone is used to receive the high frequency acoustic signals which penetrate the tested material,in order to determine the transmission time from the source to the hydrophone,the transmission time is also calculated according to the ray acoustic theory in layered media.A cost function is built based on the measured and the calculated transmission time,then the compressional- and shear-wave velocities can be obtained using the optimization algorithm.Compared with the traditional measurement scheme,this approach can not only get the 2 kinds of sound velocities in the tested material at the same time,but also keep the integrality of the tested material.With the proposed measurement system,the uncertainty of measurement results is less than 3.5%.展开更多
文摘The research achievements of solidification theories and technologies in the last decades are reviewed with the stresses on some new development in the recent years. Some new interesting areas emerged in the last years are also pointed out.
基金Funded by the National Key Technology R&D Program in the12th Five Year Plan of China(No.2011BAE14B06)the National High Technology ResearchDevelopment Program of China(No.2015AA034701)
文摘Main performance of the cement grouting materials made up by Portland cement（PC） and sulphoaluminate cement（SAC） was investigated in this program, a kind of expanding agent（EA） which was mainly constituted by metakaolin and alunite was utilized for the compensation of the shrinkage, the hydration products and micro structure of the grouting materials were researched by X-ray diffraction（XRD） and scanning electron microscopy（SEM）. The results showed that a high expansion rate of the grouting materials could be reached as the expanding agent mixed in 6% of PC mass; the addition of SAC in the S2（PC：SAC：EA=34：6：2.25） brought a further improvement of the expansion rate of the grouting materials, the analysis of XRD and SEM showed that due to the reaction of expanding agent and SAC in the grouting materials, more ettringite crystal was generated, which resulted in a higher early strength, the addition of SAC played an expansion and strength reinforcement role in the grouting materials.
文摘A dvanced Metallic Materials Research and Processing Technology Center was found in December 1998. As a unit under The College of Mechanical Engineering, the Center is an expansion of the former Cast and Composite Materials Research Group, which was found in the early eighties of last century. The Center is focusing in the basic and applied research, and development of advanced metallic materials and their processing technology. It also functions as an organization
文摘The full name of CISRI is Central Iron&Steel Research Institute under the Ministry of Metallurgical Industry in China.It is the largest institute of metallurgical process research in China(the word"large"here refers to various fields,large personnel and many research projects).It includes ironmaking,steel-making,cold and hot processing of steel,metallic product,ferroalloy,refractory,automatic metallurgy control,design
文摘in this paper, an experimental research the effect of ablating material on the reflection and the transmission of microwaves in arc-heated plasma flow is presented by using the C band microwave measuring system. The results show that the ablating material with accidented surface and its high temperature have remarkably affected the reflection and the transmission of microwaves. The experiment proves that the system has outstanding precision and reliability.
文摘At the end of 2001 National Natural Science Foundation of China (NSFC) organized a laboratory evaluation for Creative Research Groups, a pilot program launched in 2000, in the northwestern area of China and the evaluating team was deeply impressed by a young group, around 30 of average age, with their work and achievements, with their effort in pursuit of scientific truth and with their teamwork spirits. They all acknowl-
基金supported by the National Natural Science Foundation of China(11104044)Science and Technology Foundation of State Key Laboratory(9140C200103110C20)the Key Project of NationalNatural Science Foundation(11234002)
文摘A measurement scheme carried out in a tank is designed to obtain the compressionaland shear-wave velocities of a large elastic material.A hydrophone is used to receive the high frequency acoustic signals which penetrate the tested material,in order to determine the transmission time from the source to the hydrophone,the transmission time is also calculated according to the ray acoustic theory in layered media.A cost function is built based on the measured and the calculated transmission time,then the compressional- and shear-wave velocities can be obtained using the optimization algorithm.Compared with the traditional measurement scheme,this approach can not only get the 2 kinds of sound velocities in the tested material at the same time,but also keep the integrality of the tested material.With the proposed measurement system,the uncertainty of measurement results is less than 3.5%.
