Extinction ratio and resonant wavelength tuning using three dimensions of silica microresonators

In this paper, a multidimensional tuning method of the silica microcapillary resonator(MCR) is proposed and demonstrated whereby the extinction ratio(ER) as well as the resonant wavelength can be individually controlled.An ER tuning range of up to 17 d B and a maximum tuning sensitivity of 0.3 d B/μm are realized due to the tapered profile of the silica optical microfiber(MF) when the MF is adjusted along its axial direction. Compared to direct tuning of the coupling gap, this method could lower the requirement for the resolution of displacement stage to micrometers. When the MF is adjusted along the axial direction of the silica microcapillary, a resonance shift of 3.06 nm and maximum tuning sensitivity of 0.01 nm/μm are achieved. This method avoids the use of an applied external field to control the silica microresonators. Moreover, when air is replaced by ethanol and water in the core of the silica microcapillary, a maximum resonance shift of 5.22 nm is also achieved to further enlarge the resonance tuning range. Finally, a microbubble resonator with a higher Q factor is also fabricated to achieve an ER tuning range of 8.5 d B. Our method fully takes advantage of the unique structure of the MCR to separately and easily tune its key parameters, and may broaden its applications in optical signal processing and sensing.

Tunable optical filter using second-order micro-ring resonator

In this paper, we design and fabricate a silicon integrated optical filter consisting of two cascaded micro-ring resonators and two straight waveguides. Two micro-heaters are fabricated on the top of two micro-rings respectively, which are employed to modulate the micro-rings to perform the function of a tunable optical filter by the thermo–optic effect. The static response test indicates that the extinction ratio and 3-d B bandwidth are 29.01 d B and 0.21 nm respectively, the dynamic response test indicates that the 10%–90% rise and 90%–10% fall time of the filter are 16 μs and 12 μs, respectively,which can meet the requirements of optical communication and information processing. Finally, the power consumption of the device is also characterized, and the total power consumption is about 9.43 m W/nm, which has been improved efficiently.

Label-free Detection of Biotin Using Nanoporous TiO2/DNA Thin-film Coated Wavelength Interrogated Surface Plasmon Resonance Sensors

The sensing sensitivity of the wavelength interrogated surface plasmon resonance（WISPR） biosensor could be improved by self-assembly of nanoporous thin-film of TiO2 nanoparticles/DNA（TiO2/DNA）n（n is the number of bilayer） on wavelength interrogated surface plasmon resonance（WISPR） chips.The growth behavior and surface structure of the nanoporous thin-film were investigated by UV-Vis spectroscopy and scanning electron microscopy,respectively.The home-made WISPR sensor with Krestchmann configuration consisted of a tungsten-halogen lamp as a photon source and a CCD camera as the detector.After the deposition of （DNA/TiO2）n thin film on WISPR chips,the resonance peak of the reflection spectra appeared in air.With the increases of n,the resonance wavelength gradually red shifted,which is consistent with the simulated results.After the optimization of the porous film,the WISPR biosensor was utilized to detect low-molecular-weight analytes,such as biotin.The result demonstrates that the sensitivity of [poly（styrene sulfonate）/polyally lamine hydrochlorides]5（PSS/PAH）5 could be 4 times higher than that of polyelectrolyte multilayer modified WISPR sensor.

In situ Molecular Self-assembly and Sensitive Label-free Detection of Streptavidin via a Wavelength Interrogated Surface Plasmon Resonance Sensor

The sensing sensitivity of wavelength interrogated surface plasmon resonance（WISPR） biosensor is improved by self-assembly of polyelectrolyte multilayer（PEM） film of poly（allylamine hydrochloride）（PAH）/ poly（sodium-p-styrenesulfonate）（PSS） on the Au film coated glass chip via the layer-by-layer（LBL） technique. The home-made WISPR with Krestchmann configuration consists of a tungsten-halogen lamp as a photon source and a charge coupled device（CCD） camera as the detector. The influence of PEM film thickness on the optical properties of WISPR biosensors was investigated theoretically and experimentally. In order to achieve higher sensing sensitivity, the PEM film thickness has to be designed as ca.14 nm at an Au layer thickness of 50 nm and an incidental angle of 11.8°. Furthermore, the PEM coated WISPR biosensor can serve as highly sensitive biosensor, in which the biotin-streptavidin is used as bioconjugate pair. After deposition of the PEM film of （biotin/PAH）（PSS/PAH）3, the modified WISPR biosensor is more sensitive to the low concentration（〈0.01 mg/mL） of streptavidin. And the sensing sensitivity can be further increased by one order of magnitude compared with that of the biotin/PAH coated WISPR biosensor. Thus, such low-cost, high-performance and efficient PEM-coated WISPR biosensors have great potentials in a diverse array of fields such as medical diagnostics, drug screening, food safety analysis, environmental monitoring, and homeland security.

Compact on-chip 1×2 wavelength selective switch based on silicon microring resonator with nested pairs of subrings

We propose and experimentally demonstrate compact on-chip 1×2 wavelength selective switches(WSSs) based on silicon microring resonators(MRRs) with nested pairs of subrings(NPSs). Owing to the resonance splitting induced by the inner NPSs, the proposed devices are capable of performing selective channel routing at certain resonance wavelengths of the outer MRRs. System demonstration of dynamic channel routing using fabricated devices with one and two NPSs is carried out for 10 Gb∕s non-return-to-zero signal. The experimental results verify the effectiveness of the fabricated devices as compact on-chip WSSs.

Wavelength calibration of narrowband ArF laser with iron hollow cathode lamp

Accurate and precise wavelength controlling of narrowband excimer lasers is essential for the lithography of an integrated circuit. High-precision wavelength tuning and calibration of a line-narrowed Ar F laser are presented in this work. The laser spectrum is narrowed to a sub-picometer with a line narrowing system. Absolute wavelength calibration of the line-narrowed laser is performed based on the optogalvanic（OG） effect using iron hollow cathode discharge（HCD）. An sccuracy of better than 0.1 pm for wavelength tuning and calibration is achieved with our homemade wavemeter.

Coupled Mode Characteristics From the Perturbation of 3D Printed Long-Period Fiber Grating Devices

Characteristics of electric field from a coupled mode inside an optical fiber under perturbation by three-dimensional(3D)printed long-period fiber grating(LPFG)device have been observed in this work by the experiment and simulation.The various periodic index differences referring to the weights of perturbation by 3D printed LPFG device are applied on the single-mode fiber.The experimental results show that the resonant wavelength shift is a linear function of the grating period with the maximum coefficient of determination R2 of 0.9995.Some of resonant wavelengths are chosen to run simulations to investigate the electric field distribution.The scattering direction of the electric field states the magnitude of leaking optical power when the light transmits through the grating region applied to the single-mode fiber.Both the experimental and simulation results demonstrate that our proposed scheme can usefully be applied to selective tunable filters,intruder sensors,etc.

Multistage second-order microring-resonator filters with box-like spectral responses and relaxed fabrication tolerances

We demonstrate an optical filter based on multistage second-order microring resonators（MRs） with box-like spectral responses. Compared with single-stage high-order optical filters with the same number of MRs,the demonstrated structure has comparable performances in the aspects of passband flatness, rolling-off slope and insertion loss. Moreover, the architecture relaxes the fabrication tolerance, electrical wiring and tuning difficulty since there are only two MRs in each stage. We experimentally demonstrate this kind of optical filter with five stages, which shows a 3-dB bandwidth of ~17 GHz, a rolling-off slope of ~5 dB/GHz and an on-chip insertion loss of ~6 dB.