CAPTCHA is an acronym that stands for Completely Automated Public Turing Test to tell Computers and Humans Apart(CAPTCHA),it is a good example of an authentication system that can be used to determine the true identit...CAPTCHA is an acronym that stands for Completely Automated Public Turing Test to tell Computers and Humans Apart(CAPTCHA),it is a good example of an authentication system that can be used to determine the true identity of any user.It serves as a security measure to prevent an attack caused by web bots(automatic programs)during an online transaction.It can come as text-based or image-based depending on the project and the programmer.The usability and robustness,as well as level of security,provided each of the varies and call for the development of an improved system.Hence,this paper studied and improved two different CAPTCHA systems(the text-based CAPTCHA and image-based CAPTCHA).The textbased and image-based CAPTCHAwere designed using JavaScript.Response time and solving time are the two metrics used to determine the effectiveness and efficiency of the two CAPTCHA systems.The inclusion of response time and solving time improved the shortfall of the usability and robustness of the existing system.The developed system was tested using 200 students from the Federal College of Animal Health and Production Technology.The results of each of the participants,for the two CAPTCHAs,were extracted from the database and subjected to analysis using SPSS.The result shows that textbased CAPTCHAhas the lowest average solving time(21.3333 s)with a 47.8%success rate while image-based CAPTCHA has the highest average solving time was 23.5138 s with a 52.8%success rate.The average response time for the image-based CAPTCHA was 2.1855 s with a 37.9%success rate lower than the text-based CAPTCHA response time(3.5561 s)with a 62.1%success rate.This indicates that the text-based CAPTCHA is more effective in terms of usability tests while image-based CAPTCHA is more efficient in terms of system responsiveness and recommended for potential users.展开更多
Emergency ambulance services in the UK are tasked with providing pre-hospital patient care and clinical services with a target response time between call connect to on-scene attendance.In 2017,NHS England introduced f...Emergency ambulance services in the UK are tasked with providing pre-hospital patient care and clinical services with a target response time between call connect to on-scene attendance.In 2017,NHS England introduced four new response time categories based on patient needs.The most challenging is to be on-scene for a life-threatening situation within seven minutes of the call being connected when such calls are random in terms of time and place throughout a large territory.Recent evidence indicates emergency ambulance services regularly fall short of achieving the target ambulance response times set by the National Health Service(NHS).To achieve these targets,they need to undertake transformational change and apply statistical,operations research and artificial intelligence techniques in the form of five separate modules covering demand forecasting,plus locate,allocate,dispatch,monitoring and re-deployment of resources.These modules should be linked in real-time employing a data warehouse to minimise computational data and generate accurate,meaningful and timely decisions ensuring patients receive an appropriate and timely response.A simulation covering a limited geographical area,time and operational data concluded that this form of integration of the five modules provides accurate and timely data upon which to make decisions that effectively improve ambulance response times.展开更多
The behavior of variable transparency glass is studied, and the response time analyzed and measured aimed at applications to welding goggles. Detection apparatus for goggle testing is involved in the design and develo...The behavior of variable transparency glass is studied, and the response time analyzed and measured aimed at applications to welding goggles. Detection apparatus for goggle testing is involved in the design and development. Charac-teristics of the apparatus are discussed based on experiments. The definition of nominal response time and effective response time are presented based on the analysis and calculation with experimental data.展开更多
Magneto-rhelological(MR) dampers are devices that employ rheological fluids to modify their mechanical properties. Their mechanical simplicity, high dynamic range, lower power requirements, large force capacity, rob...Magneto-rhelological(MR) dampers are devices that employ rheological fluids to modify their mechanical properties. Their mechanical simplicity, high dynamic range, lower power requirements, large force capacity, robustness and safe maimer of operation in cases of failure have made them attractive devices for semi-active real-time control in civil, aerospace and automotive applications. Time response characteristic is one of the most important technical performances of MR dampers, and response time directly affects the control frequency, application range and the actual effect of MR dampers. In this study, one kind of finite difference solution for predicting the response time ofmagneto-rheological dampers from "off-state" to "on-state" is put forward. A laminar flow model is used to describe the flow in the MR valve, and a bi-viscous fluid flow model is utilized to describe the relationship of shear stress and shear rate of MR fluid. An explicit difference format is used to diseretize the Novior-Stoks equation, and stability condition of this algorithm is built by Von-Neumann stability criterion. The pressure gradient along the flow duct is solved by a dichotomy algorithm with iteration, and the changing curve of the damping force versus time of MR damper is obtained as well. According to the abovementioned numerical algorithm, the damping forces versus time curves from "off-state" to "on-state" of a cylindrical piston type MR damper are computed. Moreover, the MR damper is installed in a material test system(MTS), the magnetic field in the wire circles of the MR damper is "triggered" when the MR damper is imposed to do a constant speed motion, and the damping force curves are recorded. The comparison between numerical results and experimental results indicates that this finite difference algorithm can be used to estimate the response time delay of MR dampers.展开更多
In this paper the temperature dependence of responsivity and response time for 6H-SiC ultraviolet (UV) photodetector is simulated based on numerical model in the range from 300 K to 900 K. The simulation results sho...In this paper the temperature dependence of responsivity and response time for 6H-SiC ultraviolet (UV) photodetector is simulated based on numerical model in the range from 300 K to 900 K. The simulation results show that the responsivity and the response time of device are less sensitive to temperature and this kind of UV photodetector has excellent temperature stability. Also the effects of device structure and bias voltage on the responsivity and the response time are presented. The thicker the drift region is, the higher the responsivity and the longer the response time are. So the thickness of drift region has to be carefully designed to make trade-off between responsivity and response time.展开更多
Digital broadcasting system has become a high-light of research on computer application. To respond to the changes of the playbill in the broadcasting system in real time, the response time of the system must be studi...Digital broadcasting system has become a high-light of research on computer application. To respond to the changes of the playbill in the broadcasting system in real time, the response time of the system must be studied. There is scarcely the research on this area currently. The influence factors in the response time are analyzed; the model on the response time of the system service is built; how the influence factors affect the response time of the system service is validated; and four improvement measures are proposed to minimize the response time of system service.展开更多
To measure and control the electron motion in atoms and molecules by the strong laser field on the attosecond time scale is one of the research frontiers of atomic and molecular photophysics. It involves many new phen...To measure and control the electron motion in atoms and molecules by the strong laser field on the attosecond time scale is one of the research frontiers of atomic and molecular photophysics. It involves many new phenomena and processes and raises a series of questions of concepts, theories, and methods. Recent studies show that the Coulomb potential can cause the ionization time lag(about 100 attoseconds) between instants of the field maximum and the ionization-rate maximum. This lag can be understood as the response time of the electronic wave function to the strong-field-induced ionization event. It has a profound influence on the subsequent ultrafast dynamics of the ionized electron and can significantly change the time–frequency properties of electron trajectory(an important theoretical tool for attosecond measurement). Here, the research progress of response time and its implications on attosecond measurement are briefly introduced.展开更多
The take-over control(ToC)of human–machine interaction is a hotspot.From automatic driving to manual driving,some factors affecting driver response time have not been considered in existing models,and little attentio...The take-over control(ToC)of human–machine interaction is a hotspot.From automatic driving to manual driving,some factors affecting driver response time have not been considered in existing models,and little attention has been paid to its effects on mixed traffic flow.This study establishes a ToC model of response based on adaptive control of thought-rational cognitive architecture(CAR-ToC)to investigate the effects of driver response time on traffic flow.A quantification method of driver’s situation cognition uncertainty is also proposed.This method can directly describe the cognitive effect of drivers with different cognitive characteristics on vehicle cluster situations.The results show that when driver response time in ToC is 4.2 s,the traffic state is the best.The greater the response time is,the more obvious the stop-and-go waves exhibit.Besides,crashes happen when manual vehicles hit other types of vehicles in ToC.Effects of driver response time on traffic are illustrated and verified from various aspects.Experiments are designed to verify that road efficiency and safety are increased by using a dynamic take-over strategy.Further,internal causes of effects are revealed and suggestions are discussed for the safety and efficiency of autonomous vehicles.展开更多
Two-dimensional(2D)materials have recently provided a new perspective on optoelectronics because of their unique layered structure and excellent physical properties.However,their potential use as optoelectric devices ...Two-dimensional(2D)materials have recently provided a new perspective on optoelectronics because of their unique layered structure and excellent physical properties.However,their potential use as optoelectric devices has been limited by the trade-off between photoresponsivity and response time.Here,based on a vertically stacked atomically thin p-n junction,we propose a gap-mode plasmon structure that simultaneously enables enhanced responsivity and rapid photodetection.The atomically thin 2D materials act as a spacer for enhancing the gap-mode plasmons,and their short transit length in the vertical direction allows fast photocarrier transport.We demonstrate a high responsivity of up to 8.67 A/W with a high operation speed that exceeds 35 MHz under a 30 nW laser power.Spectral photocurrent,absorption,and a numerical simulation are used to verify the effectiveness of the gap-mode plasmons in the device.We believe that the design strategy proposed in this study can pave the way for a platform to overcome the trade-off between responsivity and response time.展开更多
Dynamic reactive power compensation equipment typically requires a fast response to output the necessary reactive power.The term"dynamic response time of reactive power"is often used but has never been clear...Dynamic reactive power compensation equipment typically requires a fast response to output the necessary reactive power.The term"dynamic response time of reactive power"is often used but has never been clearly defined.This paper summarizes the reactive power calculations under different definitions and algorithms and considers these calculations in terms of signal processing to simulate and analyze the step response.This paper subsequently focuses on the widely used instantaneous reactive power algorithm and finally concludes that the dynamic reactive power response time closely depends on the reactive power calculation method itself.The single-phase instantaneous reactive power algorithm has the fastest response time.The reactive power response time of dynamic reactive devices in power systems is a minimum of a quarter of one cycle time for the well-known and widely used single-phase reactive power algorithms.展开更多
This study uses paradata and survey data from the China Family Dynamic Survey to analyze the issue of response time in a questionnaire survey.The survey questions were classified into three levels and we compared the ...This study uses paradata and survey data from the China Family Dynamic Survey to analyze the issue of response time in a questionnaire survey.The survey questions were classified into three levels and we compared the inter-group differences of response time between four kinds of questions which included information inquiries,logical calculations,intimate information and logical judgments.We used OLS method to perform a regression analysis to identify the impediments to response time and discussed the roles played by the survey locale,and the characteristics of interviewees and those of interviewers.The major impediments that prolonged response time were factors that impeded comprehension of the survey.The impediments included the difficulties interviewees had understanding questions,questions that did not take into account the different cultural backgrounds of interviewees,the complexity of questionnaires,and the performance of interviewers.Finally,this paper puts forward some suggestions for questionnaire design and investigation processes to reduce impediments to comprehension and improve the ability of interviewers.展开更多
In order to predict and improve the performance of networked storage systems,this paper explored the rela-tionship between the system I/O response time and its per-formance factors by quantitative analytical method.Th...In order to predict and improve the performance of networked storage systems,this paper explored the rela-tionship between the system I/O response time and its per-formance factors by quantitative analytical method.Through analyzing data flow in networked RAID storage system,we established its analytical model utilizing closed queueing networks and studied the performance bounds of the system I/O response time.Experimental results show that the theo-retical bounds are found to be in agreement with the actual performance bounds of the networked RAID storage system and reflect the dynamic trend of its actual performance.Furthermore,it concludes that the CPU processing power and cache hit rate of the central storage server are the key factors affecting the I/O response time as the concurrent jobs are lower,while the network bandwidth and cache hit rate of the central storage server become the key factors as the concurrent jobs go higher.展开更多
In this paper, the response time of all-optical AND logic gate using the triangular photonic crystal lattice is investigated. The proposed logic gate consists of a photonic crystal nano-resonator formed by changing th...In this paper, the response time of all-optical AND logic gate using the triangular photonic crystal lattice is investigated. The proposed logic gate consists of a photonic crystal nano-resonator formed by changing the size of the dielectric rods. The structure benefits the interference effect mechanism. The contrast ratio of the photonic crystal AND logic gate is obtained as 6 d B. In addition to simplicity, the designed nano-resonator increases the bit rate of logic gate. The delay time and footprint of logic gate are respectively 0.32 ps and 146 μm2. The proposed photonic crystal AND logic gate can operate at a bit rate of 3.12 Tbit/s。展开更多
Recently,there have been several studies that have examined the acute effects of aerobic exercise on cognitive function.Importantly,one precise indicator of cognitive function is response time(RT),which has two main c...Recently,there have been several studies that have examined the acute effects of aerobic exercise on cognitive function.Importantly,one precise indicator of cognitive function is response time(RT),which has two main components;premotor time(PMT)and motor time(MT).PMT is the time for perception,decision making and response preparation,while MT is executing the response.Using fractionated response time(FRT)instead of RT provides a more precise estimate of the location of the effect of aerobic exercise on cognitive or motor components of the response.There is emerging evidence that shows an acute bout of exercise may improve FRT.Therefore,the purpose of this systematic review and meta-analysis was to explore the acute effect of aerobic exercise on FRT by considering the effects of various cognitive function tests.Fourteen studies were included investigating FRT during and/or after aerobic exercise.The results indicated that during exercise,PMT increased in simple reaction time and decreased in flanker task;MT decreased in choice reaction time;interestingly,RT decreased when it was assessed by choice reaction time and flanker task,almost similar to PMT and MT.After exercise,PMT decreased specifically in flanker and go/no-go tasks.However,MT and RT did not change significantly.In conclusion,as changes in RT are affected by both PMT and MT,FRT provides a more precise estimate of the locus of the effects of aerobic exercise on response time.展开更多
The seismic design of gravity retaining walls is based mostly on the pseudo static method.The seismic earth pressure is assumed to be a constant without considering the wave traveling effect when the seismic wave prop...The seismic design of gravity retaining walls is based mostly on the pseudo static method.The seismic earth pressure is assumed to be a constant without considering the wave traveling effect when the seismic wave propagates through the slope.However,under continuous ground motion,the actual earth pressure on the retaining wall varies with time.The present seismic earth pressure calculation method yields results that differ significantly from the actual scenario.Considering this,a slip surface curve was assumed in this study.It is more suitable for engineering practice.In addition,a theoretical calculation model based on energy dissipation was established.The time history of seismic earth pressure response under continuous ground motion was calculated using the equilibrium equation between the external power and the internal energy dissipation power of the sliding soil wedge.It can more effectively reflect the stress scenario of a retaining wall under seismic conditions.To verify the applicability of the proposed approach,a large-scale shaking table test was conducted,and the time history of the seismic earth pressure response obtained from the experiment was compared with the calculation results.The results show that the proposed approach is applicable to the calculation of the time history of seismic earth pressure response of gravity retaining walls.This lays the foundation for the seismic design of retaining structures by using dynamic time history.展开更多
Infiltration–runoff–slope instability mechanism of macropore slope under heavy rainfall is unclear.This paper studied its instability mechanism with an improved Green–Ampt(GA)model considering the dual-porosity(i.e...Infiltration–runoff–slope instability mechanism of macropore slope under heavy rainfall is unclear.This paper studied its instability mechanism with an improved Green–Ampt(GA)model considering the dual-porosity(i.e.,matrix and macropore)and ponding condition,and proposed the infiltration equations,infiltration–runoff coupled model,and safety factor calculation method.Results show that the infiltration processes of macropore slope can be divided into three stages,and the proposed model is rational by a comparative analysis.The wetting front depth of the traditional unsaturated slope is 17.2%larger than that of the macropore slope in the early rainfall stage and 27%smaller than that of the macropore slope in the late rainfall stage.Then,macropores benefit the slope stability in the early rainfall but not in the latter.Macropore flow does not occur initially but becomes pronounced with increasing rainfall duration.The equal depth of the wetting front in the two domains is regarded as the onset criteria of macropore flow.Parameter analysis shows that macropore flow is delayed by increasing proportion of macropore domain(ω_(f)),whereas promoted by increasing ratio of saturated permeability coefficients between the two domains(μ).The increasing trend of ponding depth is sharp at first and then grows slowly.Finally,when rainfall duration is less than 3 h,ωf andμhave no significant effect on the safety factor,whereas it decreases with increasingωf and increases with increasingμunder longer duration(≥3 h).With the increase ofω_(f),the slope maximum instability time advances by 10.5 h,and with the increase ofμ,the slope maximum instability time delays by 3.1 h.展开更多
The hydrothermal synthesis of In_(2)O_(3)and CeO_(2)–In_(2)O_(3)is investigated as well as the properties of sensor layers based on these compounds.During the synthesis of In_(2)O_(3),intermediate products In(OH)_(3)...The hydrothermal synthesis of In_(2)O_(3)and CeO_(2)–In_(2)O_(3)is investigated as well as the properties of sensor layers based on these compounds.During the synthesis of In_(2)O_(3),intermediate products In(OH)_(3)and InOOH are formed,which are the precursors of stable cubic(c-In_(2)O_(3))and metastable rhombohedral(rh-In_(2)O_(3))phases,respectively.A transition from c-In_(2)O_(3)to rh-In_(2)O_(3)is observed with the addition of CeO_(2).The introduction of cerium into rh-In_(2)O_(3)results in a decrease in the sensor response to hydrogen,while it increases in composites based on c-In_(2)O_(3).The data on the sensor activity of the composites correlate with XPS results in which CeO_(2)causes a decrease in the concentrations of chemisorbed oxygen and oxygen vacancies in rh-In_(2)O_(3).The reverse situation is observed in composites based on c-In_(2)O_(3).Compared to In_(2)O_(3)and CeO_(2)–In_(2)O_(3)obtained by other methods,the synthesized composites demonstrate maximum response to H_(2)at low temperatures by 70–100℃,and have short response time(0.2–0.5 s),short recovery time(6–7 s),and long-term stability.A model is proposed for the dependence of sensitivity on the direction of electron transfer between In_(2)O_(3)and CeO_(2).展开更多
A treat-to-target(T2T)approach applies the principles of early intervention and tight disease control to optimise long-term outcomes in Crohn's disease.The Selecting Therapeutic Targets in Inflammatory Bowel Disea...A treat-to-target(T2T)approach applies the principles of early intervention and tight disease control to optimise long-term outcomes in Crohn's disease.The Selecting Therapeutic Targets in Inflammatory Bowel Disease(STRIDE)-II guidelines specify short,intermediate,and long-term treatment goals,documenting specific treatment targets to be achieved at each of these timepoints.Scheduled appraisal of Crohn’s disease activity against pre-defined treatment targets at these timepoints remains central to determining whether current therapy should be continued or modified.Consensus treatment targets in Crohn’s disease comprise combination clinical and patient-reported outcome remission,in conjunction with biomarker normalisation and endoscopic healing.Although the STRIDE-II guidelines endorse the pursuit of endoscopic healing,clinicians must consider that this may not always be appropriate,acceptable,or achievable in all patients.This underscores the need to engage patients at the outset in an effort to personalise care and individualise treatment targets.The use of non-invasive biomarkers such as faecal calprotectin in conjunction with cross-sectional imaging techniques,particularly intestinal ultrasound,holds great promise;as do emerging treatment targets such as transmural healing.Two randomised clinical trials,namely,CALM and STARDUST,have evaluated the efficacy of a T2T approach in achieving endoscopic endpoints in patients with Crohn’s disease.Findings from these studies reflect that patient subgroups and Crohn’s disease characteristics likely to benefit most from a T2T approach,remain to be clarified.Moreover,outside of clinical trials,data pertaining to the real-world effectiveness of a T2T approach remains scare,highlighting the need for pragmatic real-world studies.Despite the obvious promise of a T2T approach,a lack of guidance to support its integration into real-world clinical practice has the potential to limit its uptake.This highlights the need to describe strategies,processes,and models of care capable of supporting the integration and execution of a T2T approach in real-world clinical practice.Hence,this review seeks to examine the current and emerging literature to provide clinicians with practical guidance on how to incorporate the principles of T2T into routine clinical practice for the management of Crohn’s disease.展开更多
Six kinds of Sn(OH)_4 precipitates were prepared by the chemical precipitation method (liquid-phase),of which the pH values are 3.0 (sample 1),4.5 (sample 2),6.0 (sample 3),7.5 (sample 4),9.0 (sample 5) and 10.5 (samp...Six kinds of Sn(OH)_4 precipitates were prepared by the chemical precipitation method (liquid-phase),of which the pH values are 3.0 (sample 1),4.5 (sample 2),6.0 (sample 3),7.5 (sample 4),9.0 (sample 5) and 10.5 (sample 6),respectively. After washed and dried,the Sn(OH)_4 precipitates were first calcined into tin oxide powder.Six kinds of gas sensors were made from the obtained SnO_2 powders.The XRD patterns of all the samples were recorded.The sensing properties of all samples to C_2H_5OH and H_2 gases were measured in different gas concentrations and temperatures,including the sensitivities of all samples,their response and recovery properties.The recovery properties of all samples to C_2H_5OH exhibit the sinusoidal oscillation character.展开更多
Cross-training is a phenomenon related to motor learning, where motor performance of the untrained limb shows improvement in strength and skill execution following unilateral training of the homologous contralateral l...Cross-training is a phenomenon related to motor learning, where motor performance of the untrained limb shows improvement in strength and skill execution following unilateral training of the homologous contralateral limb. We used functional MRI to investigate whether motor performance of the untrained limb could be improved using a serial reaction time task according to motor sequential learning of the trained limb, and whether these skill acquisitions led to changes in brain activation patterns. We recruited 20 right-handed healthy subjects, who were randomly allocated into training and control groups. The training group was trained in performance of a serial reaction time task using their non-dominant left hand, 40 minutes per day, for 10 days, over a period of 2 weeks. The control group did not receive training. Measurements of response time and percentile of response accuracy were performed twice during pre- and post-training, while brain functional MRI was scanned during performance of the serial reaction time task using the untrained right hand. In the training group, prominent changes in response time and percentile of response accuracy were observed in both the untrained right hand and the trained left hand between pre- and post-training. The control group showed no significant changes in the untrained hand between pre- and post-training. In the training group, the activated volume of the cortical areas related to motor function (i.e., primary motor cortex, premotor area, posterior parietal cortex) showed a gradual decrease, and enhanced cerebellar activation of the vermis and the newly activated ipsilateral dentate nucleus were observed during performance of the serial reaction time task using the untrained right hand, accompanied by the cross-motor learning effect. However, no significant changes were observed in the control group. Our findings indicate that motor skills learned over the 2-week training using the trained limb were transferred to the opposite homologous limb, and motor skill acquisition of the untrained limb led to changes in brain activation patterns in the cerebral cortex and cerebellum.展开更多
文摘CAPTCHA is an acronym that stands for Completely Automated Public Turing Test to tell Computers and Humans Apart(CAPTCHA),it is a good example of an authentication system that can be used to determine the true identity of any user.It serves as a security measure to prevent an attack caused by web bots(automatic programs)during an online transaction.It can come as text-based or image-based depending on the project and the programmer.The usability and robustness,as well as level of security,provided each of the varies and call for the development of an improved system.Hence,this paper studied and improved two different CAPTCHA systems(the text-based CAPTCHA and image-based CAPTCHA).The textbased and image-based CAPTCHAwere designed using JavaScript.Response time and solving time are the two metrics used to determine the effectiveness and efficiency of the two CAPTCHA systems.The inclusion of response time and solving time improved the shortfall of the usability and robustness of the existing system.The developed system was tested using 200 students from the Federal College of Animal Health and Production Technology.The results of each of the participants,for the two CAPTCHAs,were extracted from the database and subjected to analysis using SPSS.The result shows that textbased CAPTCHAhas the lowest average solving time(21.3333 s)with a 47.8%success rate while image-based CAPTCHA has the highest average solving time was 23.5138 s with a 52.8%success rate.The average response time for the image-based CAPTCHA was 2.1855 s with a 37.9%success rate lower than the text-based CAPTCHA response time(3.5561 s)with a 62.1%success rate.This indicates that the text-based CAPTCHA is more effective in terms of usability tests while image-based CAPTCHA is more efficient in terms of system responsiveness and recommended for potential users.
文摘Emergency ambulance services in the UK are tasked with providing pre-hospital patient care and clinical services with a target response time between call connect to on-scene attendance.In 2017,NHS England introduced four new response time categories based on patient needs.The most challenging is to be on-scene for a life-threatening situation within seven minutes of the call being connected when such calls are random in terms of time and place throughout a large territory.Recent evidence indicates emergency ambulance services regularly fall short of achieving the target ambulance response times set by the National Health Service(NHS).To achieve these targets,they need to undertake transformational change and apply statistical,operations research and artificial intelligence techniques in the form of five separate modules covering demand forecasting,plus locate,allocate,dispatch,monitoring and re-deployment of resources.These modules should be linked in real-time employing a data warehouse to minimise computational data and generate accurate,meaningful and timely decisions ensuring patients receive an appropriate and timely response.A simulation covering a limited geographical area,time and operational data concluded that this form of integration of the five modules provides accurate and timely data upon which to make decisions that effectively improve ambulance response times.
基金the Science and Technology Commission of Shanghai Municipality (Grant No.052912015)
文摘The behavior of variable transparency glass is studied, and the response time analyzed and measured aimed at applications to welding goggles. Detection apparatus for goggle testing is involved in the design and development. Charac-teristics of the apparatus are discussed based on experiments. The definition of nominal response time and effective response time are presented based on the analysis and calculation with experimental data.
基金supported by National Natural Science Foundation of China (Grant No. 50675106)
文摘Magneto-rhelological(MR) dampers are devices that employ rheological fluids to modify their mechanical properties. Their mechanical simplicity, high dynamic range, lower power requirements, large force capacity, robustness and safe maimer of operation in cases of failure have made them attractive devices for semi-active real-time control in civil, aerospace and automotive applications. Time response characteristic is one of the most important technical performances of MR dampers, and response time directly affects the control frequency, application range and the actual effect of MR dampers. In this study, one kind of finite difference solution for predicting the response time ofmagneto-rheological dampers from "off-state" to "on-state" is put forward. A laminar flow model is used to describe the flow in the MR valve, and a bi-viscous fluid flow model is utilized to describe the relationship of shear stress and shear rate of MR fluid. An explicit difference format is used to diseretize the Novior-Stoks equation, and stability condition of this algorithm is built by Von-Neumann stability criterion. The pressure gradient along the flow duct is solved by a dichotomy algorithm with iteration, and the changing curve of the damping force versus time of MR damper is obtained as well. According to the abovementioned numerical algorithm, the damping forces versus time curves from "off-state" to "on-state" of a cylindrical piston type MR damper are computed. Moreover, the MR damper is installed in a material test system(MTS), the magnetic field in the wire circles of the MR damper is "triggered" when the MR damper is imposed to do a constant speed motion, and the damping force curves are recorded. The comparison between numerical results and experimental results indicates that this finite difference algorithm can be used to estimate the response time delay of MR dampers.
文摘In this paper the temperature dependence of responsivity and response time for 6H-SiC ultraviolet (UV) photodetector is simulated based on numerical model in the range from 300 K to 900 K. The simulation results show that the responsivity and the response time of device are less sensitive to temperature and this kind of UV photodetector has excellent temperature stability. Also the effects of device structure and bias voltage on the responsivity and the response time are presented. The thicker the drift region is, the higher the responsivity and the longer the response time are. So the thickness of drift region has to be carefully designed to make trade-off between responsivity and response time.
文摘Digital broadcasting system has become a high-light of research on computer application. To respond to the changes of the playbill in the broadcasting system in real time, the response time of the system must be studied. There is scarcely the research on this area currently. The influence factors in the response time are analyzed; the model on the response time of the system service is built; how the influence factors affect the response time of the system service is validated; and four improvement measures are proposed to minimize the response time of system service.
基金Project supported by the National Natural Science Foundation of China(Grant No.91750111)the National Key Research and Development Program of China(Grant No.2018YFB0504400)。
文摘To measure and control the electron motion in atoms and molecules by the strong laser field on the attosecond time scale is one of the research frontiers of atomic and molecular photophysics. It involves many new phenomena and processes and raises a series of questions of concepts, theories, and methods. Recent studies show that the Coulomb potential can cause the ionization time lag(about 100 attoseconds) between instants of the field maximum and the ionization-rate maximum. This lag can be understood as the response time of the electronic wave function to the strong-field-induced ionization event. It has a profound influence on the subsequent ultrafast dynamics of the ionized electron and can significantly change the time–frequency properties of electron trajectory(an important theoretical tool for attosecond measurement). Here, the research progress of response time and its implications on attosecond measurement are briefly introduced.
基金thankful to National Key Research and Development Plan(Grant No.2018YFB1600500)。
文摘The take-over control(ToC)of human–machine interaction is a hotspot.From automatic driving to manual driving,some factors affecting driver response time have not been considered in existing models,and little attention has been paid to its effects on mixed traffic flow.This study establishes a ToC model of response based on adaptive control of thought-rational cognitive architecture(CAR-ToC)to investigate the effects of driver response time on traffic flow.A quantification method of driver’s situation cognition uncertainty is also proposed.This method can directly describe the cognitive effect of drivers with different cognitive characteristics on vehicle cluster situations.The results show that when driver response time in ToC is 4.2 s,the traffic state is the best.The greater the response time is,the more obvious the stop-and-go waves exhibit.Besides,crashes happen when manual vehicles hit other types of vehicles in ToC.Effects of driver response time on traffic are illustrated and verified from various aspects.Experiments are designed to verify that road efficiency and safety are increased by using a dynamic take-over strategy.Further,internal causes of effects are revealed and suggestions are discussed for the safety and efficiency of autonomous vehicles.
基金This work was supported by the National Research Foundation of Korea(NRF)through Basic Research Program(No.2019R1A2C2009171)Creative Materials Discovery Program(No.2016M3D1A1900035).
文摘Two-dimensional(2D)materials have recently provided a new perspective on optoelectronics because of their unique layered structure and excellent physical properties.However,their potential use as optoelectric devices has been limited by the trade-off between photoresponsivity and response time.Here,based on a vertically stacked atomically thin p-n junction,we propose a gap-mode plasmon structure that simultaneously enables enhanced responsivity and rapid photodetection.The atomically thin 2D materials act as a spacer for enhancing the gap-mode plasmons,and their short transit length in the vertical direction allows fast photocarrier transport.We demonstrate a high responsivity of up to 8.67 A/W with a high operation speed that exceeds 35 MHz under a 30 nW laser power.Spectral photocurrent,absorption,and a numerical simulation are used to verify the effectiveness of the gap-mode plasmons in the device.We believe that the design strategy proposed in this study can pave the way for a platform to overcome the trade-off between responsivity and response time.
文摘Dynamic reactive power compensation equipment typically requires a fast response to output the necessary reactive power.The term"dynamic response time of reactive power"is often used but has never been clearly defined.This paper summarizes the reactive power calculations under different definitions and algorithms and considers these calculations in terms of signal processing to simulate and analyze the step response.This paper subsequently focuses on the widely used instantaneous reactive power algorithm and finally concludes that the dynamic reactive power response time closely depends on the reactive power calculation method itself.The single-phase instantaneous reactive power algorithm has the fastest response time.The reactive power response time of dynamic reactive devices in power systems is a minimum of a quarter of one cycle time for the well-known and widely used single-phase reactive power algorithms.
基金funded by the China Social Science Foundation(Grant 16ZDA089)-Construction of China’s population data platform(1949-2015).
文摘This study uses paradata and survey data from the China Family Dynamic Survey to analyze the issue of response time in a questionnaire survey.The survey questions were classified into three levels and we compared the inter-group differences of response time between four kinds of questions which included information inquiries,logical calculations,intimate information and logical judgments.We used OLS method to perform a regression analysis to identify the impediments to response time and discussed the roles played by the survey locale,and the characteristics of interviewees and those of interviewers.The major impediments that prolonged response time were factors that impeded comprehension of the survey.The impediments included the difficulties interviewees had understanding questions,questions that did not take into account the different cultural backgrounds of interviewees,the complexity of questionnaires,and the performance of interviewers.Finally,this paper puts forward some suggestions for questionnaire design and investigation processes to reduce impediments to comprehension and improve the ability of interviewers.
基金granted by National Natural Science Foundation of China(No.60273031,No.90612001)Educa-tion Ministry Doctoral Research Foundation of China(No.20020055021)Technological Development Project Foundation of Tianjin(No.043800311).
文摘In order to predict and improve the performance of networked storage systems,this paper explored the rela-tionship between the system I/O response time and its per-formance factors by quantitative analytical method.Through analyzing data flow in networked RAID storage system,we established its analytical model utilizing closed queueing networks and studied the performance bounds of the system I/O response time.Experimental results show that the theo-retical bounds are found to be in agreement with the actual performance bounds of the networked RAID storage system and reflect the dynamic trend of its actual performance.Furthermore,it concludes that the CPU processing power and cache hit rate of the central storage server are the key factors affecting the I/O response time as the concurrent jobs are lower,while the network bandwidth and cache hit rate of the central storage server become the key factors as the concurrent jobs go higher.
文摘In this paper, the response time of all-optical AND logic gate using the triangular photonic crystal lattice is investigated. The proposed logic gate consists of a photonic crystal nano-resonator formed by changing the size of the dielectric rods. The structure benefits the interference effect mechanism. The contrast ratio of the photonic crystal AND logic gate is obtained as 6 d B. In addition to simplicity, the designed nano-resonator increases the bit rate of logic gate. The delay time and footprint of logic gate are respectively 0.32 ps and 146 μm2. The proposed photonic crystal AND logic gate can operate at a bit rate of 3.12 Tbit/s。
文摘Recently,there have been several studies that have examined the acute effects of aerobic exercise on cognitive function.Importantly,one precise indicator of cognitive function is response time(RT),which has two main components;premotor time(PMT)and motor time(MT).PMT is the time for perception,decision making and response preparation,while MT is executing the response.Using fractionated response time(FRT)instead of RT provides a more precise estimate of the location of the effect of aerobic exercise on cognitive or motor components of the response.There is emerging evidence that shows an acute bout of exercise may improve FRT.Therefore,the purpose of this systematic review and meta-analysis was to explore the acute effect of aerobic exercise on FRT by considering the effects of various cognitive function tests.Fourteen studies were included investigating FRT during and/or after aerobic exercise.The results indicated that during exercise,PMT increased in simple reaction time and decreased in flanker task;MT decreased in choice reaction time;interestingly,RT decreased when it was assessed by choice reaction time and flanker task,almost similar to PMT and MT.After exercise,PMT decreased specifically in flanker and go/no-go tasks.However,MT and RT did not change significantly.In conclusion,as changes in RT are affected by both PMT and MT,FRT provides a more precise estimate of the locus of the effects of aerobic exercise on response time.
基金supported by the Strategic International Science and Technology Innovation Cooperation Project‘Research on On-line Monitoring and Evaluation Technology of Safety Status of Highspeed Railway Track-subgrade System’from the National Key R&D Program of China(Grant No.2018YFE0207100)the State Key Laboratory for Geomechanics and Deep Underground Engineering,China University of Mining&Technology/China University of Mining&Technology,Beijing(Grant No.SKLGDUEK1910)+1 种基金the Foundation of Engineering Research Center of Eco-environment in the Three Gorges Reservoir Region of China(Grant No.KF2018-01)the Youth Scientific and Technological Innovation Team of Southwest Petroleum University(Grant No.2018CXTD02)。
文摘The seismic design of gravity retaining walls is based mostly on the pseudo static method.The seismic earth pressure is assumed to be a constant without considering the wave traveling effect when the seismic wave propagates through the slope.However,under continuous ground motion,the actual earth pressure on the retaining wall varies with time.The present seismic earth pressure calculation method yields results that differ significantly from the actual scenario.Considering this,a slip surface curve was assumed in this study.It is more suitable for engineering practice.In addition,a theoretical calculation model based on energy dissipation was established.The time history of seismic earth pressure response under continuous ground motion was calculated using the equilibrium equation between the external power and the internal energy dissipation power of the sliding soil wedge.It can more effectively reflect the stress scenario of a retaining wall under seismic conditions.To verify the applicability of the proposed approach,a large-scale shaking table test was conducted,and the time history of the seismic earth pressure response obtained from the experiment was compared with the calculation results.The results show that the proposed approach is applicable to the calculation of the time history of seismic earth pressure response of gravity retaining walls.This lays the foundation for the seismic design of retaining structures by using dynamic time history.
基金funded by the Natural Science Foundation of Fujian Province(Grant No.2023J011133)。
文摘Infiltration–runoff–slope instability mechanism of macropore slope under heavy rainfall is unclear.This paper studied its instability mechanism with an improved Green–Ampt(GA)model considering the dual-porosity(i.e.,matrix and macropore)and ponding condition,and proposed the infiltration equations,infiltration–runoff coupled model,and safety factor calculation method.Results show that the infiltration processes of macropore slope can be divided into three stages,and the proposed model is rational by a comparative analysis.The wetting front depth of the traditional unsaturated slope is 17.2%larger than that of the macropore slope in the early rainfall stage and 27%smaller than that of the macropore slope in the late rainfall stage.Then,macropores benefit the slope stability in the early rainfall but not in the latter.Macropore flow does not occur initially but becomes pronounced with increasing rainfall duration.The equal depth of the wetting front in the two domains is regarded as the onset criteria of macropore flow.Parameter analysis shows that macropore flow is delayed by increasing proportion of macropore domain(ω_(f)),whereas promoted by increasing ratio of saturated permeability coefficients between the two domains(μ).The increasing trend of ponding depth is sharp at first and then grows slowly.Finally,when rainfall duration is less than 3 h,ωf andμhave no significant effect on the safety factor,whereas it decreases with increasingωf and increases with increasingμunder longer duration(≥3 h).With the increase ofω_(f),the slope maximum instability time advances by 10.5 h,and with the increase ofμ,the slope maximum instability time delays by 3.1 h.
基金supported by the Russian Science Foundation(grant No.22-19-00037),https://rscf.ru/project/22-19-00037/.
文摘The hydrothermal synthesis of In_(2)O_(3)and CeO_(2)–In_(2)O_(3)is investigated as well as the properties of sensor layers based on these compounds.During the synthesis of In_(2)O_(3),intermediate products In(OH)_(3)and InOOH are formed,which are the precursors of stable cubic(c-In_(2)O_(3))and metastable rhombohedral(rh-In_(2)O_(3))phases,respectively.A transition from c-In_(2)O_(3)to rh-In_(2)O_(3)is observed with the addition of CeO_(2).The introduction of cerium into rh-In_(2)O_(3)results in a decrease in the sensor response to hydrogen,while it increases in composites based on c-In_(2)O_(3).The data on the sensor activity of the composites correlate with XPS results in which CeO_(2)causes a decrease in the concentrations of chemisorbed oxygen and oxygen vacancies in rh-In_(2)O_(3).The reverse situation is observed in composites based on c-In_(2)O_(3).Compared to In_(2)O_(3)and CeO_(2)–In_(2)O_(3)obtained by other methods,the synthesized composites demonstrate maximum response to H_(2)at low temperatures by 70–100℃,and have short response time(0.2–0.5 s),short recovery time(6–7 s),and long-term stability.A model is proposed for the dependence of sensitivity on the direction of electron transfer between In_(2)O_(3)and CeO_(2).
文摘A treat-to-target(T2T)approach applies the principles of early intervention and tight disease control to optimise long-term outcomes in Crohn's disease.The Selecting Therapeutic Targets in Inflammatory Bowel Disease(STRIDE)-II guidelines specify short,intermediate,and long-term treatment goals,documenting specific treatment targets to be achieved at each of these timepoints.Scheduled appraisal of Crohn’s disease activity against pre-defined treatment targets at these timepoints remains central to determining whether current therapy should be continued or modified.Consensus treatment targets in Crohn’s disease comprise combination clinical and patient-reported outcome remission,in conjunction with biomarker normalisation and endoscopic healing.Although the STRIDE-II guidelines endorse the pursuit of endoscopic healing,clinicians must consider that this may not always be appropriate,acceptable,or achievable in all patients.This underscores the need to engage patients at the outset in an effort to personalise care and individualise treatment targets.The use of non-invasive biomarkers such as faecal calprotectin in conjunction with cross-sectional imaging techniques,particularly intestinal ultrasound,holds great promise;as do emerging treatment targets such as transmural healing.Two randomised clinical trials,namely,CALM and STARDUST,have evaluated the efficacy of a T2T approach in achieving endoscopic endpoints in patients with Crohn’s disease.Findings from these studies reflect that patient subgroups and Crohn’s disease characteristics likely to benefit most from a T2T approach,remain to be clarified.Moreover,outside of clinical trials,data pertaining to the real-world effectiveness of a T2T approach remains scare,highlighting the need for pragmatic real-world studies.Despite the obvious promise of a T2T approach,a lack of guidance to support its integration into real-world clinical practice has the potential to limit its uptake.This highlights the need to describe strategies,processes,and models of care capable of supporting the integration and execution of a T2T approach in real-world clinical practice.Hence,this review seeks to examine the current and emerging literature to provide clinicians with practical guidance on how to incorporate the principles of T2T into routine clinical practice for the management of Crohn’s disease.
文摘Six kinds of Sn(OH)_4 precipitates were prepared by the chemical precipitation method (liquid-phase),of which the pH values are 3.0 (sample 1),4.5 (sample 2),6.0 (sample 3),7.5 (sample 4),9.0 (sample 5) and 10.5 (sample 6),respectively. After washed and dried,the Sn(OH)_4 precipitates were first calcined into tin oxide powder.Six kinds of gas sensors were made from the obtained SnO_2 powders.The XRD patterns of all the samples were recorded.The sensing properties of all samples to C_2H_5OH and H_2 gases were measured in different gas concentrations and temperatures,including the sensitivities of all samples,their response and recovery properties.The recovery properties of all samples to C_2H_5OH exhibit the sinusoidal oscillation character.
基金supported by the Yeungnam College of Science & Technology Research Grants in 2012
文摘Cross-training is a phenomenon related to motor learning, where motor performance of the untrained limb shows improvement in strength and skill execution following unilateral training of the homologous contralateral limb. We used functional MRI to investigate whether motor performance of the untrained limb could be improved using a serial reaction time task according to motor sequential learning of the trained limb, and whether these skill acquisitions led to changes in brain activation patterns. We recruited 20 right-handed healthy subjects, who were randomly allocated into training and control groups. The training group was trained in performance of a serial reaction time task using their non-dominant left hand, 40 minutes per day, for 10 days, over a period of 2 weeks. The control group did not receive training. Measurements of response time and percentile of response accuracy were performed twice during pre- and post-training, while brain functional MRI was scanned during performance of the serial reaction time task using the untrained right hand. In the training group, prominent changes in response time and percentile of response accuracy were observed in both the untrained right hand and the trained left hand between pre- and post-training. The control group showed no significant changes in the untrained hand between pre- and post-training. In the training group, the activated volume of the cortical areas related to motor function (i.e., primary motor cortex, premotor area, posterior parietal cortex) showed a gradual decrease, and enhanced cerebellar activation of the vermis and the newly activated ipsilateral dentate nucleus were observed during performance of the serial reaction time task using the untrained right hand, accompanied by the cross-motor learning effect. However, no significant changes were observed in the control group. Our findings indicate that motor skills learned over the 2-week training using the trained limb were transferred to the opposite homologous limb, and motor skill acquisition of the untrained limb led to changes in brain activation patterns in the cerebral cortex and cerebellum.