Chitosan-immobilized Palladium Complex: a Green and Highly Active Heterogeneous Catalyst for Heck Reaction

A green heterogeneous catalyst for Heck reaction-chitosan-immobilized palladium complex was prepared. The catalyst exhibits high activity and stereoselectivity under the moderate reaction conditions. The catalyst can be separated easily from the reaction mixture and reused after washing. Under the suitable reaction conditions, the cross-coupling of iodobenzene (ArI) with acrylic acid (AA) or acrylate can be achieved 93.3% or 99% yield of trans-cinnamic acid or trans-cinnamic ester.

Characterization and performance of Cu/ZnO/Al_2O_3 catalysts prepared via decomposition of M(Cu,Zn)-ammonia complexes under sub-atmospheric pressure for methanol synthesis from H_2 and CO_2

Methanol synthesis from hydrogenation of CO2 is investigated over Cu/ZnO/Al2O3 catalysts prepared by decomposition of M（Cu,Zn）-ammonia complexes （DMAC） at various temperatures.The catalysts were characterized in detail,including X-ray diffraction,N2 adsorption-desorption,N2O chemisorption,temperature-programmed reduction and evolved gas analyses.The influences of DMAC temperature,reaction temperature and specific Cu surface area on catalytic performance are investigated.It is considered that the aurichalcite phase in the precursor plays a key role in improving the physiochemical properties and activities of the final catalysts.The catalyst from rich-aurichalcite precursor exhibits large specific Cu surface area and high space time yield of methanol （212 g/（Lcat·h）;T=513 K,p=3MPa,SV=12000 h-1）.

Study on Polymerization of 4-Vinylpyridine by Neodymium Complex Catalyst

Polymerization of 4-vinylpyridine by complex catalyst of neodymium chloride was studied. The influence of Al/Nd (molar ratio), concentration of catalyst, reaction time and temperature on polymerization of 4-vinylpyridine was investigated. The results show that different kinds of ligand in the rare earth complex have an effect on the catalytic activity of the complex. The catalytic activity of the rare earth complex is higher than that of simple rare earth chloride. The catalytic activity of polymer-supported catalyst is higher than those of the similar small molecular system.

A Sterically Hindered Zirconocene Complex (1,2-Ph_2C_5H_3)_2ZrCl_2:Synthesis,Structure and Properties as Olefin Polymerization Catalyst

An unbridged zirconocene complex bis(1,2-diphenylcyclopentadienyl)zirconium dichloride [(1,2-Ph2-C5H3)2ZrCl2] 1 has been synthesized and structurally characterized. When activated by MAO, 1 produces ultra-high molecular weight polyethylene with high melting transition temperature, as well as atactic oligopropylene with average molecular weight of ~1150 g mol-1.

Polymerization of Styrene and 1,3-Butadiene by Catalyst Systems Based on Calix[4]arene Neodymium Complexes

Polymerization of styrene and 1,3-butadiene were performed by calix[4]arene-neodymium complexes using di-n-butylmagnesium and tri-iso-butylaluminum as cocatalyst respectively. The effect of the substituent groups in calix[4]arene on the catalytic activity was first investigated.

Friedel-Crafts Acylation Reactions Using Catalytic SbCl_5-TEBA Complex as an Efficient Catalyst

SbCl_5-TEBA (PhCH_2NEt_3Cl) complex catalyzes the Friedel-Crafts acylation reactionsefficiently.

1, 1'—BIS (BENZYLSELENO) FERROCENE PLATINUM COMPLEX AS HYDROSlLYLATION CATALYST FOR OLEFINS

1, 1'--Bis(benzylseleno)ferrocene and its platinum complex were synthesized. It was found that the platinum complex was efficient catalyst for the hydrosilylation of olefins with triethoxysilane.

SILICA-BOUND CROWN ETHERS PLATINUM COMPLEX AS HYDROSILYLATION CATALYST

Silica-bound 15-Crown-5, 18-Crown-6 with a spacer of propyloxymethyl and their platinum complexes have been synthesized. It was found that they were efficient catalysts for the hydrosilylation of olefms with triethoxysilane in the temperature range of 60 to 130 ℃.

STUDY ON POLYMER—Ru-Co—BIMETALLIC COMPLEXES CATALYSTS Ⅰ. SYNTHESIS OF CATALYSTS AND THEIR USE FOR THE HYDROFORMYLATION

Six kinds of polymer ligands, supported on SiO_2, containing coordinating atoms P, S and N respectively, have been synthesized. The Ru(Ⅲ)-Co(Ⅱ) bimetallic complexes of these polymer ligands have been obtained and examined as catalysts for the hydroformylation of cyclohexene. The effects of reaction temperature, pressure and Co/Ru ratio etc. on the activities of catalysts were investigated in detail. The catalysts are all polymer-noncarbonyl-metal complexes, easily to be prepared, active and stable. From the experimental results it can be suggested that under reaction conditions such polymer-noncarbonyl-metal complexes convert 'in situ' to polymer-carbonyl-metal complexes, thus become active catalysts. The course of this conversion is supposed as a preliminary approach.

CROWN FUNCTIONALIZED LINEAR POLYSILOXANE PLATINUM COMPLEX AS HYDROSILYLATION CATALYST

A modified method of preparing crown functionalized linear polysiloxane has been described.4'-allylbenzo-15-crown-5 was subjected to hydrosilylation with methyldichlorosilane,followed bypolycondensation with silanol-terminated polydimethylsiloxane to give the title crownfunctionalized linear polysiloxane. It was found that the polysiloxane could be coordinated withplatinum salt to form platinum complex, which could catalyze the hydrosilylation of olefins withtriethoxysilane efficiently.

Synthesis and Catalytic Activity of a Two-core Ruthenium Carbene Complex: a Unique Catalyst for Ring Closing Metathesis Reaction

The reaction of a ruthenium carbide complex RuCl2（C：）（PCy3）2 with [H（Et2O）x]＋[BF4]- at a molar ratio of 1：2 produced a two-core ruthenium carbene complex, {[RuCl（=CHPCy3）（PCy3）]2（μ-Cl）3}＋·[BF4]-, in the form of a yellow-green crystalline solid in a yield of 94%. This two-core ruthenium complex is a selective catalyst for ring closing metathesis of unsubstituted terminal dienes. More importantly, no isomerized byproduct was observed for N-substrates when the two-core ruthenium complex was used as the catalyst at an elevated temperature（137 °C）, indicating that the complex is a chemo-selective catalyst for ring closing metathesis reactions.

4-Selena-7-thiaoctyl Polystyrene-supported Platinum Complex as Hydrosilylation Catalyst

ＩｎｔｒｏｄｕｃｔｉｏｎＳｅｌｅｎｏｅｔｈｅｒｐｌａｔｉｎｕｍｃｏｍｐｌｅｘｅｓａｓａｎｅｗｋｉｎｄｏｆｈｙｄｒｏｓｉｌｙｌａｔｉｏｎｃａｔａｌｙｓｔｈａｖｅｂｅｅｎｄｒａｗｎｍｕｃｈａｔｅｎｔｉｏｎｒｅｃｅｎｔｌｙ．Ａｓｅｒｉｅｓｏｆｓｅｌｅｎｏｅ...

A Study of Heteropoly Complexes of Rare Earths as Catalyst Promoter in the Synthesis of Ethyl Acetate

The capability of the synthesized heteropoly complexes of rare earths {K10 [(O39W11Si) Ln(Gly)3Ln(SiW11O39)]?H2O (Ln=La, Pr, Nd, Sm, Eu, Gd, Tb, Dy)} as the catalyst promoter in the synthesis of the ethyl acetate was studied. The results showed that the quantity of H2SO4 used for synthesizing the ethyl acetate can be reduced by 75% and the yield reached 98% at the optional condition.

Trinuclear Metal Complexes Based on 1,10-Phenanthroline Derivates as Catalysts for Cleavage of a RNA-Model Substrate

Two multidentate ligands 2,9-di[6＇-（2″-hydroxyl-3″-methoxyphenyl）-n-2＇,5＇-diazahexyl]-1,10-phenanthroline（LA）and 2,9-di（6＇-α-phenol-n-2＇,5＇-diazahexyl）-1,10-phenanthroline（LB）were synthesized and fully characterized.Protonation of the ligands and the stability of the complexes of the ligands with divalent metal ions were investigated.The trinuclear metal complexes [Cu（Ⅱ）and Zn（Ⅱ）] of the ligands were studied,as catalysts,for the transphosphorylation of the RNA-model substrate 2-hydroxypropyl-p-nitrophenyl phosphate（HPNP）.The second-order rate constants of HPNP-hydrolysis catalyzed by M3L and M3LH-1 were obtained,which indicated that Zn3LBH-1 was the most efficient catalyst among them.The proposed mechanisms included the activation of the substrate via binding to the metal ions and intramolecular nucleophilic attack by the deprotonated C2-hydroxyl of HPNP.

CARBONACEOUS PRODUCTS OF POLYMER-PALLADIUM COMPLEXES AS CATALYSTS FOR THE HYDROGENATION OF METHYL ACRYLATE

Many catalysts were pcrpared by carbonization of ion exchange resin-PdCl_2 complexes at high temperature in nitrogen, hydrogen atmosphere. The rates for the hydrogenation of methyl acrylate and the amounts of Pd elution of the carbonaceous products were measured and compared with those of commercial Pd/C catalyst. It indicates that the carbonaceous products are less active than Pd/C. However, the leaching of Pd from carbonaceous products is very small and much less than that from Pd/C.

Simple Preparation of Halogen-Substituted <i>α</i>-Diimine Nickel Complexes Immobilized into Clay Interlayer as Catalysts for Ethylene Oligo-/Polymerization

In the practical use for the production of the α-olefins, it is highly desired to develop a novel heterogeneous catalyst system. The metal complexes immobilized into the clay interlayers show a great potential as heterogeneous catalysts due to their excellent processability. In this study, nine types of heterogeneous procatalyst Ln/Ni2+-micas were synthesized via a one-pot preparation method, which includes both the condensation reaction of the ligand derivatives and the intercalation of the ligands into the Ni2+ ion-exchanged fluorotetrasilicic mica interlayer. The ligand structures of the prepared procatalysts were [Ln: R-N = C(Nap)-C(Nap) = N-R] [(Nap = 1,8-naphthdiyl) (L1, R = 2-MePh;L2, R = 2-FPh;L3, R = 2-BrPh;L4, R = 4-MePh;L5, R = 4-FPh;L6, R = 4-BrPh;L7, R = 2,4-F2Ph;L8, R = 2,4-Br2Ph;L9, R = 2,6-F2Ph). At 50℃ and 0.7 MPaethylene pressure, the triisobutylaluminum-activated L1-L6/Ni2+-mica showed a catalytic activity for the ethylene oligo-/polymerization in the range of 334 - 549 g-ethylene&bull;g-cat–1&bull;h–1. A high catalyst activity was obtained when the substituent having a larger steric bulk than that of a methyl substituent was introduced at the ortho-position of the aryl rings. The introduction of the fluorine substituent as a strong electron-withdrawing group to the para-position also increased the catalytic activity. The L2, L4, L5, and L6/Ni2+-micas showed moderate selectivities to oligomers consisting of C4-C20 in the range of 19.9 - 41.6 wt% at 50℃. The calculated Schulz-Flory constants α based on the mole fraction of C12 and C14 were within 0.61 - 0.78.

Preparation of Ultrafine and High Dispersion Pd/C Catalyst and Its Electrocatalytic Performance for Formic Acid Oxidation

A carbon supported Pd（Pd/C） catalyst used as the anodic catalyst in the direct formic acid fuel cells（DFAFC） was prepared via the improved complex reduction method with sodium ethylenediamine tetracetate（EDTA） as stabilizer and complexing agent. This method is very simple. The average size of the Pd particles in the Pd/C catalyst prepared with the improved complex reduction method is as small as about 2.1 nm and the Pd particles in the Pd/C catalyst possess an excellent uniformity. The Pd/C catalyst shows a high electrocatalytic activity and stability for the formic acid oxidation.

Selective Oxidation of Isobutylene over Cs-promoted Mo-Bi-Co-Fe-Ce-O Catalyst

Cs-promoted Mo-Bi-Co-Fe-Ce-O catalyst for the selective oxidation of isobutylene to methacrolein had been studied in a fixed bed micro-reactor. The selectivity to methacrolein was significantly improved by the addition of Cs, which could probably enhance the dehydrogenation ability and weaken the oxygenation ability of the catalyst based on temperature programmed reduction （TPR） analysis investigation. The kinetic studies indicated that the oxidation of isobutylene to methacrolein followed the first-order kinetic behavior.

2-AMINOMETHYLPYRIDINE NICKEL(Ⅱ) COMPLEXES—SYNTHESIS,MOLECULAR STRUCTURE AND CATALYSIS OF ETHYLENE POLYMERIZATION

A series of new nickel(Ⅱ)complexes with 2-aminomethylpyridine ligands,(2-PyCH_2NHAr)_2NiBr_2(Ar=2,6- dimethylphenyl 2a;2,6-diisopropylphenyl 2b,2,6-difluorophenyl 2c),have been synthesized and used as catalyst precursors for ethylene polymerization in the presence of methylaluminoxane(MAO).The catalysts containing ortho-alkyl-substituents afford high molecular weight branched polyethylenes as well as a certain amount of oligomers.Enhancing the steric bulk of the alkyl substituent of the catalyst resulted in...

Dehydrogenation characteristics of LiAlH4 improved by in-situ formed catalysts

The hydrogen storage properties and catalytic mechanism of FeCl-doped LiAlHwere investigated in minute details. LiAlH-2 mol% FeClsamples start to release hydrogen at 76 °C, which is 64 °C lower than that of as-received LiAlH. Isothermal desorption measurements show that the 2 mol% FeCl-doped sample releases 7.0 wt% of hydrogen within 17 min at 250 °C. At lower temperatures of 110 °C and 80 °C, the sample can release 4.4 wt% and 3 wt% of hydrogen, respectively. The apparent activation energy of LiAlH-2 mol% FeClsamples for R2 is 105.02 k J/mol, which is 67 k J/mol lower than that of pure LiAlH. The reaction between LiAlHand FeClduring ball milling was found by analyzing the X-ray diffraction results,and Fe-Al particles formed in-situ from the reaction act as the real catalyst for the dehydrogenation of LiAlH.