Trauma kills more than four million people worldwide each year,with chest trauma accounting for 25%of these deaths.Rib fractures are the main manifestation of chest trauma.Biodegradable Zn alloys offer a new option to...Trauma kills more than four million people worldwide each year,with chest trauma accounting for 25%of these deaths.Rib fractures are the main manifestation of chest trauma.Biodegradable Zn alloys offer a new option to overcome clinical problems caused by permanent rib fracture internal fixation mate-rials,e.g.,long-term stress masking and secondary surgery.In this study,the fabrication procedure of biodegradable Zn-0.5Li alloy rib plates is successfully developed,which consists of casting,hot-warm rolling,cutting,and pressing sequentially.Biomechanical three-point bending performance of the Zn al-loy rib plates is comparable to that of commercial pure Ti rib plates,much higher than that of pure Zn rib plates.In addition,the Zn alloy exhibits the best antibacterial ability against E.coli and S.aureus among the three materials.Although the Zn alloy exhibits a weaker MC3T3 cytocompatibility than pure Ti,it is better than pure Zn.This study provides a foundation for the future development of various biodegrad-able Zn alloy rib plates.展开更多
Background: Costal fracture surgical is still a debate, therefore we shall select between early and delay surgical management. Case Report: We are reporting two cases of post road traffic clash delay ribs fractures os...Background: Costal fracture surgical is still a debate, therefore we shall select between early and delay surgical management. Case Report: We are reporting two cases of post road traffic clash delay ribs fractures osteosynthesis involving a 63-year-old man with multistage fractures on the left and pulmonary pinning of one of the costal arches, complicated by a homolateral haemothorax and a 41-year-old man with a bilateral flail chest. Conclusion: The simple postoperative course and the immediate postoperative improvement in the patient’s clinical respiratory condition enabled us to discuss the time frame for management, in this case the indication for early or later surgery.展开更多
The 1 dimensional localization of elastic waves in disordered periodic multi span rib stiffened plates is investigated. The transfer matrix method is employed to obtain the transfer matrix of the system, and the metho...The 1 dimensional localization of elastic waves in disordered periodic multi span rib stiffened plates is investigated. The transfer matrix method is employed to obtain the transfer matrix of the system, and the method for calculating the Lyapunov exponents in continuous dynamic systems presented by Wolf is used to determine the localization factor. As examples, the numerical results of the localization factors are given for a disordered rib stiffened plate. The effects of the degree of disorder of span...展开更多
To analyze the effects of width and thickness of each composition element of mixed steel U-rib-stiffened plates on the welding residual stress distribution, the distribution of the U-rib and the plate residual stress ...To analyze the effects of width and thickness of each composition element of mixed steel U-rib-stiffened plates on the welding residual stress distribution, the distribution of the U-rib and the plate residual stress was calculated using a simplified calculation method. The method involved welding the mixed steel U-rib-stiffened plates for a structure with different sizes and different strength ratios of U-rib to plate. Based on a welding residual stress numerical simulation method validated by the blind hole method test, the distribution law of the mixed steel U-rib stiffened plate was studied. The results showed that the change of plate width has little impact on the welding residual stress and that the ratio of the thicknesses of the plate to U-rib stiffeners, the thickness of the plate, and the thickness of the U-rib has a great influence on the distribution of the welding residual stress. The thickness of plate and steel strength also greatly influenced the distribution width of the residual tensile stress. While analyzing the compression capacity of U-rib-stiffened plates, the simplified distribution of welding residual stress was used.展开更多
This research is the analysis of rib and groove type wind guide plate for wind generation power system. This device generates electricity by the air flow producing by the high-speed vehicles driving on the road. It ca...This research is the analysis of rib and groove type wind guide plate for wind generation power system. This device generates electricity by the air flow producing by the high-speed vehicles driving on the road. It can produce electricity as long as there are car passing on the high way. The effect is much more efficient in heavy traffic with high speed. If we can set up a large number of this system along the highway, it can provide the lighting in the highway at night but also sell the extra electricity to the power companies with low cost, high performances and improvement of environmental benefits.展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.51871020,52071028,81700799,and 82070926).
文摘Trauma kills more than four million people worldwide each year,with chest trauma accounting for 25%of these deaths.Rib fractures are the main manifestation of chest trauma.Biodegradable Zn alloys offer a new option to overcome clinical problems caused by permanent rib fracture internal fixation mate-rials,e.g.,long-term stress masking and secondary surgery.In this study,the fabrication procedure of biodegradable Zn-0.5Li alloy rib plates is successfully developed,which consists of casting,hot-warm rolling,cutting,and pressing sequentially.Biomechanical three-point bending performance of the Zn al-loy rib plates is comparable to that of commercial pure Ti rib plates,much higher than that of pure Zn rib plates.In addition,the Zn alloy exhibits the best antibacterial ability against E.coli and S.aureus among the three materials.Although the Zn alloy exhibits a weaker MC3T3 cytocompatibility than pure Ti,it is better than pure Zn.This study provides a foundation for the future development of various biodegrad-able Zn alloy rib plates.
文摘Background: Costal fracture surgical is still a debate, therefore we shall select between early and delay surgical management. Case Report: We are reporting two cases of post road traffic clash delay ribs fractures osteosynthesis involving a 63-year-old man with multistage fractures on the left and pulmonary pinning of one of the costal arches, complicated by a homolateral haemothorax and a 41-year-old man with a bilateral flail chest. Conclusion: The simple postoperative course and the immediate postoperative improvement in the patient’s clinical respiratory condition enabled us to discuss the time frame for management, in this case the indication for early or later surgery.
基金National Natural Science F oundation of China (19972 0 18) and Projectsupported by the National Key Basic Research Foun-dation of China (G19980 2 0 3 17)
文摘The 1 dimensional localization of elastic waves in disordered periodic multi span rib stiffened plates is investigated. The transfer matrix method is employed to obtain the transfer matrix of the system, and the method for calculating the Lyapunov exponents in continuous dynamic systems presented by Wolf is used to determine the localization factor. As examples, the numerical results of the localization factors are given for a disordered rib stiffened plate. The effects of the degree of disorder of span...
文摘To analyze the effects of width and thickness of each composition element of mixed steel U-rib-stiffened plates on the welding residual stress distribution, the distribution of the U-rib and the plate residual stress was calculated using a simplified calculation method. The method involved welding the mixed steel U-rib-stiffened plates for a structure with different sizes and different strength ratios of U-rib to plate. Based on a welding residual stress numerical simulation method validated by the blind hole method test, the distribution law of the mixed steel U-rib stiffened plate was studied. The results showed that the change of plate width has little impact on the welding residual stress and that the ratio of the thicknesses of the plate to U-rib stiffeners, the thickness of the plate, and the thickness of the U-rib has a great influence on the distribution of the welding residual stress. The thickness of plate and steel strength also greatly influenced the distribution width of the residual tensile stress. While analyzing the compression capacity of U-rib-stiffened plates, the simplified distribution of welding residual stress was used.
文摘This research is the analysis of rib and groove type wind guide plate for wind generation power system. This device generates electricity by the air flow producing by the high-speed vehicles driving on the road. It can produce electricity as long as there are car passing on the high way. The effect is much more efficient in heavy traffic with high speed. If we can set up a large number of this system along the highway, it can provide the lighting in the highway at night but also sell the extra electricity to the power companies with low cost, high performances and improvement of environmental benefits.
