RUTHENIUM CARBENE INITIATED RING-OPEN METATHESIS POLYMERIZATION OF ENDO-BICYCLO[3.2.0]HEPT-6-EN-3-YL BENZOATES WITH TACTICITY STUDIES

After tentative ring-opening cross metathesis （ROCM） of endo-bicyclo[3.2.0]hept-6-en-3-yl 4-bromobenzoate with PhCH = CH2 initiated by （Cy3P）2Cl2Ru = CHPh in CH2Cl2, ring-opening metathesis polymerization （ROMP） of a series of endo-bicyclo[3.2.0]hept-6-en-3-yl benzoates was achieved under the same conditions, furnishing a variety of the corresponding polymers. Then some of them were selected to hydrogenate the C=C double bonds in their backbone with p-tosylhydrazide, affording saturated and thus more flexible polymers. All of these polymers were well characterized by spectroscopic means including GPC, UV-Vis, NMR and IR, based on which the tacticity of these polymers was investigated together with nonlinear optical （electric-field-induced second-harmonic generation, EFISH）） analysis.

SYNTHESIS OF NOVEL BI-FUNCTIONAL COPOLYMER BEARING STERICALLY HINDERED PHENOL AND HINDERED AMINE GROUPS VIA RING-OPENING METATHESIS POLYMERIZATION

Norbornene derivatives exo,endo-2-[2-(3,5-di-tert-butyl-4-hydroxyphenoxy)-acetoxy]methyl-5-norbornene(M1) and 3,3,5,5-tetramethyl-4-piperidinyl 5-norbornene-exo,endo-2-carboxylate(M2)were synthesized and polymerized by RuCl_2(=CHPh)(PCy_3)_2 to prepare a novel kind of bi-functional polymer bearing sterically hindered phenol(SHP)and hindered amine(HLAS)groups via ring-opening metathesis polymerization(ROMP).The resulting copolymers were characterized by gel permeation chromatography(GPC),~1H-NMR and differen...

Synthesis,Structure,and Ring-opening Metathesis Polymerization of η~5-Pentamethylcyclopentadienyl-(η~5-exo-tricyclo [5.2.1.0^(2,6)]deca-2,5,8-trien-6-yl) Iron

η^5-Pentamethylcyclopentadienyl-（η^5-exo-tricyclo[5.2.1.0^2,6]deca-2,5,8-trien-6-yl） iron（3） was synthesized and characterized by ^1H NMR, ^13C NMR, MS, elemental analysis, IR, UV and X-ray diffraction analysis. Compound 3 was polymerized with ring-opening metathesis polymerization（ROMP） initiator （PCy3）2Cl2Ru=CHPh. ^1H NMR and IR spectra revealed the presence of CH=CH units in the polymer and supported the ROMP mechanism. GPC analysis of the polymer showed that the weight-average molecular weights（Mw） was 5967, and the polydispersity index（PDl） was 1.16. The polymer was also investigated by UV and cyclic voltammetry.

Synthesis of New Polymer Ionomers via Ring-Opening Metathesis Polymerization

The N-pentafluorophenyl-exo-endo-norbornene-5,6-dicarboximide (2a) and N-phenyl-exo-endo-nor-bornene-5,6-dicarboximide (2b) monomers were synthesized and polymerized via ring-opening metathesis polymerization (ROMP) using bis(tricyclohexylphosphine) benzylidene ruthenium(IV) dichloride (I) and tricyclohexylphosphine [1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazol-2-ylidene][benzylidene] ruthenium dichloride (II). Both catalysts were used to synthesize random and block high molecular weight copolymers which were further hydrogenated using a Wilkinson’s catalyst. Then, the saturated copolymers were modified by reacting with sodium 4-hydroxybenzene-sulfonate dihydrate to generate new ionomers with fluoro-sulfonic acid pendant groups.

LIGAND EFFECT OF CATALYTIC SYSTEM WCl_6-Et_2Al FOR RING OPENING METATHESIS POLYMERIZATION OF DICYCLOPENTADIENE

Ligand effect of the catalytic system WCl6-Et2AlCl for ring opening metathesis polymerization (ROMP) of dicyclopentadiene (DCPD) was investigated. The experimental results show that adding sterically hindered phenol-2. 6-di-tert-butylcresylol(DTBC) in the catalytic system not only can obviously increase the monomer conversion of polymerization but also improve the mechanical properties, such as notched impact strength (NIS), tensile strength (TS) ect. 5 of the synthesized polyicycolpentadiene (PDCPD). A similar effect can be observed by using a sterically hindered polymeric phenol - linear phenol formaldehyde resin (LPF) as a ligand.

TAILORING POLYMERS WITH NOVEL STRUCTURES VIA RING OPENING METATHESIS POLYMERIZATION

This paper reviewed some recent advances of ring opening metathesis polymerization (ROMP) in tailoring polymers with novel and controlled structures.

7-Oxa-2,3-Diazanorbornene:A One-Step Accessible Monomer for Living Ring-Opening Metathesis Polymerization to Produce Backbone-Biodegradable Polymers

Traditional ring-opening metathesis polymerization(ROMP)reactions exhibit broad functional group compatibility and precise control over polymer architectures,albeit with non-biodegradable backbones.Recent progress has resulted in a series of biodegradable ROMP products with diverse cleavable functional groups,yet the majority of the monomers display moderate to low ring strain,which restricts their living polymerization reactivity.In this study,a novel category of readily available 7-oxa-2,3-diazanorbornenes(ODAN)is presented,which exhibits the highest ring strain(22.8 kcal/mol)compared to existing degradable ROMP monomers.This trait endows ODAN with the ability to perform living polymerization reactions,generating narrowly dispersed homopolymers,block copolymers,and statistical copolymers with various cyclic olefin comonomers,thereby enabling precise control over distribution of the biodegradable functional groups.Additionally,the resultant polymers comprise directly connected allyl hemiaminal ether and urethane units,which are hydrolyzable at controllable rates.Thus,these well-defined,structure-tunable,and backbone-biodegradable ROMP polymers are applied as nanoetching materials and biodegradable delivery carriers.

SYNTHESIS OF A COMB GRAFT COPOLYMER VIA RING OPENING METATHESIS POLYMERIZATION CATALYZED BY SUPPORTED RHUTHENIUM CARBENE COMPLEX

Chloromethyl-2-norbornene was synthesized via Diels-Alder reaction of cyclopentadiene and allyl chloride using a polymer supported boron trifluoride as the catalyst, and was then lithiated and used to initiate a living anionic polymerization of styrene to prepare a macromonome, 5-polystyryl-2-norbornene NBPS. Comb graft copolymer PNBgPS was synthesized via ring opening metathesis polymerization of the macromonomer under the catalysis of ruthenium carbene complex RuCl2(PPh3)2(=CCHtBu) and its polymer supported correspondent. Experimental results showed that the behavior of both the supported boron and supported ruthenium catalysts are superior to their unsupported counterparts. The possible promotion mechanism of the tailor-made supports is discussed.

RING-OPENING POLYMERIZATION OF TRIMETHYLENE CARBONATE CATALYZED BY NOVEL SINGLE COMPONENT RARE EARTH CALIXARENE COMPLEXES

In this paper,ring-opening polymerization of trimethylene carbonate(TMC)with rare earth(Nd,Y,La)ρ-tert- butylcalix[n]arene(n=4,6,and 8)complexes as catalysts has been studied.Poly(trimethylene carbonate)(PTMC)with M_v of 21,400 was produced by bulk polymerization under the conditions as follows:[TMC]_0/[Nd](molar ratio)=1000,80℃, 8 h.Mechanism study reveals that the polymerization proceeds via a coordination mechanism.

Ring-opening Polymerization ofε-Caprolactone Using Lanthanide Tris(4-tert-butylphenolate)s as a Single-component Initiator

The ring-opening polymerization of e-caprolactone (CL) initiated by novel single lanthanide tris(4-tert-butylphenolate)s [Ln(OTBP)3] is reported. Single-component La(OTBP)3 can effectively prepare polycaprolactone (PCL) with over 90% yield and viscosity average molecular weight about 60 x 10 under quite mild conditions: molar ratio of CL to initiator is 1000, 60 C, 2 h in toluene. Mechanism study indicates that the monomer inserts into the growing chain via the break of acyl-oxygen bond of CL.

RING-OPENING POLYMERIZATION OFε-CAPROLACTONE USING LANTHANIDE TRIS(N-PHENYL-3,5-DI-T-BUTYLSALICYLALDIMINATO)S AS SINGLE COMPONENT CATALYST

Ring-opening polymerization of ε-caprolactone has been carried out by using rare earth Schiff base complexes： lanthanide tris（N-phenyl-3,5-di-t-butylsalicylaldiminato）s [Ln（OPBS）3] as single component catalyst for the first time. The influences of different rare earth elements, monomer and catalyst concentration as well as reaction time on the polymerization were investigated. Mechanism studies showed that monomer inserts into the active site with the acyl-oxygen bond scission rather than the break of alkyl-oxygen bond.

SYNTHESIS, CHARACTERIZATION AND RING-OPENING POLYMERIZATION OF CYCLIC (ARYLENE PHOSPHONATE) OLIGOMERS

A series of cyclic (arylene phosphonate) oligomers were prepared by reaction of phenylphosphonic dichloride (PPD) with various bisphenols under pseudo-high dilution conditions via interfacial polycondensation. The yield of cyclic (arylene phosphonate) oligomers is over 85% by using hexadecyltrimethylammoniun bromide as phase transfer catalyst (PTC) at 0 'C . The structures of the cyclic oligomers were confirmed by a combination of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) and IR analysis. These cyclic oligomers undergo facile ring-opening polymerization in the melt by using potassium 4,4'-biphenoxide as the initiator to give linear polyphosphonate. Free-radical ring-opening polymerization of cyclic(arylene phosphonate) oligomers containing sulfur linkages was also performed in the melt using 2,2'-dithiobis(benzothiazole) (DTB) as the initiator at 270 °C and the resulting polymer had a Mw, of 8 × 103 with a molecular weight distribution of 4. Ring-opening copolymerization of these cyclic oligomers with cyclic carbonate oligomers was also achieved. The average molecular weight of the resulting copolymer is higher than the corresponding homopolymer and the thermal stability of the copolymer is better than the corresponding homopolymer.

SYNTHESIS OF POLY(5,5-DIMETHYL-1,3-DIOXAN-2-ONE)BY LIPASE-CATALYZED RING-OPENING POLYMERIZATION

Porcine pancreas lipase (PPL) and PPL immobilized on narrow distributed micron-sized glass beads wereemployed successfully for the ring-opening polymerization of 5, 5-dimethyl-1, 3-dioxan-2-one (DTC) for the first time.Different polymerization conditions such as enzyme concentration and reaction temperature were studied. Immobilized PPLexhibits higher activity than native PPL. Along wth the increasing enzyme concentration, the molecular weigh of resultingPDTC decreases. PPL immobilized on narrow distributed micron-sized glass beads has outstanding recyclability. For thethird recycle time, immobilized PPL exhibits the highest catalytic activity and with high activity even after the fifth recyletime for the synthesis of PDTC. The ~1H-NMR spectra indicate that decarboxylation does not occur during the ring-openingpolymerization.

Calcium chloride doped zinc-cobalt metal-cyanide complex:Unexpected highly activity towards ring-opening polymerization of propylene oxide

Highly active calcium chloride（CaCl2） doped Zn-Co^Ⅲdouble metal-cyanide（Ca-DMC） catalysts were firstly reported.Ca-DMCs presented a very higher polymer yield（54 kg polymer/g catalyst） at relative low temperature（80-115℃） toward ringopening polymerization（ROP） of propylene oxide（PO） than did DMC catalysts without modification.

A Series of Rare Earth Phenolates Substituted by Alkyl Groups for D,L-Lactide Ring-Opening Polymerization

Single component rare earth phenolates substituted by various alkyl groups have been prepared and the correlation between the aryloxides＇ structure and catalytic activity in the ring-opening polymerization of D,L-lactide has also been investigated.The catalytic activity of all rare earth aryloxides,characteristics of the ring-opening polymerization as well as polymerization kinetics and mechanism were investigated.The results showed that both phenolates＇ catalytic activities and polymerization characteristics changed regularly,keeping in good concordance with variations in substitutents＇ number on phenol and structure of aryloxide ligands.The stronger ability of electron-donation of alkyl groups,the higher catalytic activity.Moreover,the more numbers of substituted alkyl on phenyl ring,the higher catalytic activity.The analyses of polymer ends revealed that the polymerization proceeded via a coordination-acyl-oxygen bond cleavage-insertion mechanism.

Tetrahydrosalen backboned gadolinium complex as initiator for the ring-opening polymerization of ε-caprolactone

Tetrahydrosalen ligand was employed in the synthesis of gadolinium complex. The ligand was deprotoned by LiBu, and the afforded lithium salt was reacted with anhydrous GdCl3 to produce the gadolinium complex through salt metathesis. This complex was successfully used to initiate the ring-opening polymerization of ε-caprolactone. The initiation conditions in different temperature, monomer-to-initiator ratio and time were investigated. Under the condition： [ε-caprolactone]：[catalyst] = 600, 56 ℃, toluene： 2 ml, poly（ε-caprolactone） （PCL） with Mw = 11,2782 and PDI = 1.96 was achieved.

RING-OPENING POLYMERIZATION OF TRIMETHYLENE CARBONATE BY CALIX[8]ARENE-NEODYMIUM

Ring-opening polymerization of trimethylene carbonate (TMC) with a rare earth calixarene compound as catalyst has been studied for the first time. The effect of TMC/Nd (molar ratio) and polymerization conditions were investigated in detail. It was found that calix[8]arene-neodymium is a highly effective catalyst for the bulk polymerization of TMC and gives high molecular weight (M-v = 60,000) polymer. The optimum conditions of TMC polymerization were found to be as follows:TMC/Nd (molar ratio) = 2,000, 80 degrees C, 16 h. The polymers were characterized by NMR, GPC and DSC. Studying the mechanism by NMR showed that the polymerization of TMC catalyzed by calix[8]arene-neodymium proceeds via a cationic mechanism.

Cationic ring-opening polymerization of 3,3-bis(chloromethyl)oxacyclobutane in ionic liquids

Cationic ring-opening polymerization of 3,3-bis（chloromethyl）oxacyclobutane catalyzed by BF3.OEt2 was carded out in ionic liquids [bmim]BF4 and [bmim]PF6. The influences of BCMO concentration and molar ratio of BCMO/BF3.OEt2 on the molecular weights and yield of PBCMO were investigated. The polymerization in ionic liquids proceed to high conversions, although molecular weights are limited, similar to polymerization in organic solvent such as CH2Cl2. Follow a viewpoint of green chemistry, we feel ionic liquid [bmim]BF4 is superior to [bmim]PF6. Extracting [bmim]PF6 from the product using organic solvent as extractant limits its advantage as a green reaction media.

RING-OPENING POLYMERIZATION OF l,4-DIOXAN-2-ONE INITIATED BY LANTHANUM TRIS(2,6-DI-TERT-BUTYL-4-METHYLPHENOLATE)

The ring-opening polymerization of 1,4-dioxan-2-one （PDO） was carried out by lanthanum tris（2,6-di-tert-butyl-4- methylphenolate） （La（OAr）3） as novel single component initiaLor. The influences of polymerization reaction temperature and the molar ratio of monomer to initiator on the monomer conversion and molecular weight of poly（1,4-dioxan-2-one） （PPDO） were explored. PPDO with high viscosity average molecular weight of 1.95×10^5 can be prepared at 40℃ when [PDO]/ [La（OAr）3] molar ratio was 800. Mechanism investigation shows that the polymerization proceeds through a ＂coordination- insertion＂ mechanism with selective rupture of acyl-oxygen be,nd of PDO.