期刊文献+
共找到1,143篇文章
< 1 2 58 >
每页显示 20 50 100
Scaling of rise time of drive current on development of magneto-Rayleigh–Taylor instabilities for single-shell Z-pinches 被引量:1
1
作者 王小光 王冠琼 +4 位作者 孙顺凯 肖德龙 丁宁 毛重阳 束小建 《Chinese Physics B》 SCIE EI CAS CSCD 2022年第2期471-479,共9页
In fast Z-pinches,rise time of drive current plays an important role in development of magneto-Rayleigh–Taylor(MRT)instabilities.It is essential for applications of Z-pinch dynamic hohlraum(ZPDH),which could be used ... In fast Z-pinches,rise time of drive current plays an important role in development of magneto-Rayleigh–Taylor(MRT)instabilities.It is essential for applications of Z-pinch dynamic hohlraum(ZPDH),which could be used for driving inertial confinement fusion(ICF),to understand the scaling of rise time on MRTs.Therefore,a theoretical model for nonlinear development of MRTs is developed according to the numerical analysis.It is found from the model that the implosion distance L=r_(0)-r_(mc)determines the development of MRTs,where r_(0)is the initial radius and rmc is the position of the accelerating shell.The current rise timeτwould affect the MRT development because of its strong coupling with the r;.The amplitude of MRTs would increase with the rise time linearly if an implosion velocity is specified.The effects of the rise time on MRT,in addition,are studied by numerical simulation.The results are consistent with those of the theoretical model very well.Finally,the scaling of the rise time on amplitude of MRTs is obtained for a specified implosion velocity by the theoretical model and numerical simulations. 展开更多
关键词 magneto-Rayleigh-Taylor instability rise time Z-PINCH MAGNETOHYDRODYNAMIC
下载PDF
The effect of pulse voltage rise rate on the polypropylene surface hydrophilic modification by ns pulsed nitrogen DBD
2
作者 刘峰 李舒豪 +3 位作者 赵昱雷 Shakeel AKRAM 张丽 方志 《Plasma Science and Technology》 SCIE EI CAS CSCD 2023年第10期6-14,共9页
The nanosecond(ns) pulsed nitrogen dielectric barrier discharge(DBD) is employed to enhance the hydrophilicity of polypropylene(PP) surface and improve its application effect.The discharge characteristics of the ns pu... The nanosecond(ns) pulsed nitrogen dielectric barrier discharge(DBD) is employed to enhance the hydrophilicity of polypropylene(PP) surface and improve its application effect.The discharge characteristics of the ns pulsed nitrogen DBD with different pulse rise times(from 50to 500 ns) are investigated by electrical and optical diagnostic methods and the discharge uniformity is quantitatively analyzed by image processing method.To characterize the surface hydrophilicity,the water contact angle(WCA) is measured,and the physical morphology and chemical composition of PP before and after modification are analyzed to explore the effect of plasma on PP surface.It is found that with increasing pulse rise time from 50 to 500 ns,DBD uniformity becomes worse,energy efficiency decreases from 20% to 10.8%,and electron density decrease from 6.6 × 10^(11)to 5.5 × 10^(11)cm^(-3).The tendency of electron temperature is characterized with the intensity ratio of N_(2)/N_(2)^(+)emission spectrum,which decreases from 17.4 to15.9 indicating the decreasing of T_(e) with increasing pulse rise time from 50 to 500 ns.The PP surface treated with 50 ns pulse rise time DBD has a lower WCA(~47°),while the WCA of PP treated with 100 to 500 ns pulse rise time DBD expands gradually(~50°–57°).According to the study of the fixed-point WCA values,the DBD-treated PP surface has superior uniformity under50 ns pulse rise time(3° variation) than under 300 ns pulse rise time(8° variation).After DBD treatment,the increased surface roughness from 2.0 to 9.8 nm and hydrophilic oxygencontaining groups on the surface,i.e.hydroxyl(-OH) and carbonyl(C=O) have played the significant role to improve the sample’s surface hydrophilicity.The short pulse voltage rise time enhances the reduced electric field strength(E/n) in the discharge space and improves the discharge uniformity,which makes relatively sufficient physical and chemical reactions have taken place on the PP surface,resulting in better treatment uniformity. 展开更多
关键词 dielectric barrier discharge pulse rise time material surface modification POLYPROPYLENE UNIFORMITY
下载PDF
Effects of drive current rise-time and initial load density distribution on Z-pinch characteristics 被引量:1
3
作者 段耀勇 郭永辉 +1 位作者 王文生 邱爱慈 《Chinese Physics B》 SCIE EI CAS CSCD 2005年第9期1856-1861,共6页
A two-dimensional, three-temperature radiation magneto-hydrodynamics model is applied to the investigation of evolutional trends in x-ray radiation power, energy, peak plasma temperature and density as functions of dr... A two-dimensional, three-temperature radiation magneto-hydrodynamics model is applied to the investigation of evolutional trends in x-ray radiation power, energy, peak plasma temperature and density as functions of drive current rise-time and initial load density distribution by using the typical experimental parameters of tungsten wire-array Z- pinch on the Qiangguang-I generator. The numerical results show that as the drive current rise-time is shortened, x-ray radiation peak power, energy, peak plasma density and peak ion temperature increase approximately linearly, but among them the x-ray radiation peak power increases more quickly. As the initial plasma density distribution in the radial direction becomes gradually flattened, the peak radiation power and the peak ion-temperature almost exponentially increase, while the radiation energy and the peak plasma density change only a little. The main effect of shortening drive current rise-time is to enhance compression of plasma, and the effect of flattening initial load density distribution in the radial direction is to raise the plasma temperature. Both of the approaches elevate the x-ray peak radiation power 展开更多
关键词 Z-PINCH drive current rise-time initial load density distribution numerical simulation
下载PDF
Discriminating cosmic muons and X-rays based on rise time using a GEM detector
4
作者 吴会寅 赵圣鹰 +6 位作者 王晓冬 章先鸣 祁辉荣 张伟 吴柯岩 胡碧涛 张毅 《Chinese Physics C》 SCIE CAS CSCD 2016年第8期72-75,共4页
Gas electron multiplier (GEM) detectors have been used in cosmic muon scattering tomography and neutron imaging over the last decade. In this work, a triple GEM device with an effective readout area of 10 cm × ... Gas electron multiplier (GEM) detectors have been used in cosmic muon scattering tomography and neutron imaging over the last decade. In this work, a triple GEM device with an effective readout area of 10 cm × 10 cm is developed, and a method of discriminating between cosmic muons and X-rays based on rise time is tested. The energy resolution of the GEM detector is tested by 55Fe ray source to prove the GEM detector has a good performance. Analysis of the complete signal-cycles allows us to get the rise time and pulse heights. The experiment result indicates that cosmic muons and X-rays can be discriminated with an appropriate rise time threshold. 展开更多
关键词 gas electron multiplier cosmic muon X-RAY rising time DISCRIMINATION
原文传递
Analog rise-time discriminator for CdZnTe detector
5
作者 Chuan-Hao Hu Guo-Qiang Zeng +4 位作者 Liang-Quan Ge Shi-Long Wei Jian Yang Qiang Li Hong-Zhi Li 《Nuclear Science and Techniques》 SCIE CAS CSCD 2017年第4期59-65,共7页
Due to variable time for charge collection,energy resolution of nuclear detectors declines,especially compound semiconductor detectors like cadmium zinc telluride(CdZnTe) detector.To solve this problem,an analog rise-... Due to variable time for charge collection,energy resolution of nuclear detectors declines,especially compound semiconductor detectors like cadmium zinc telluride(CdZnTe) detector.To solve this problem,an analog rise-time discriminator based on charge comparison principle is designed.The reference charge signal after attenuation is compared with the deconvoluted and delayed current signal.It is found that the amplitude of delayed current signal is higher than that of the reference charge signal when rise time of the input signal is shorter than the discrimination time,thus generating gating signal and triggering DMCA(digital multi-channel analyzer) to receive the total integral charge signal.When rise time of the input signal is longer than discrimination time,DMCA remains inactivated and the corresponding total integral charge signal is abandoned.Test results show that combination of the designed rise-time discriminator and DMCA can reduce hole tailing of CdZnTe detector significantly.Energy resolution of the system is 0.98%@662 keV,and it is still excellent under high counting rates. 展开更多
关键词 ANALOG rise-time DISCRIMINATOR CDZNTE detector Charge comparison PRINCIPLE
下载PDF
GP断层破裂模型在青海门源M_(S)6.9地震强地面运动模拟的适用性研究
6
作者 罗超 曹晓雨 +3 位作者 高阳 徐飞 冯怀平 王昊 《地球物理学报》 SCIE EI CAS CSCD 北大核心 2024年第2期534-547,共14页
2022年1月8日青海省门源县发生M_(S)6.9地震,震中附近遭受了强烈地震破坏.为验证Graves和Pitarka开发的GP断层破裂模型在震前对中国地区地震动场的预测与评估能力,本文基于GP法,考虑不同上升时间系数(rc)的影响,对门源地震进行了确定性... 2022年1月8日青海省门源县发生M_(S)6.9地震,震中附近遭受了强烈地震破坏.为验证Graves和Pitarka开发的GP断层破裂模型在震前对中国地区地震动场的预测与评估能力,本文基于GP法,考虑不同上升时间系数(rc)的影响,对门源地震进行了确定性地震动模拟.将模拟结果在地震动衰减规律、波形与幅值和烈度分布三个方面分别与青藏地区的地震动峰值预测方程、强震观测记录和根据强震记录自动产出的烈度图进行了对比.结果表明,当rc为9.0时,模拟记录与实测记录和地震动峰值预测方程基本一致.本文较好的重现了门源地震的强震动场,在合理选取rc的情况下,GP法可以应用于中国地区震前强地震动场的预测和估计. 展开更多
关键词 门源M_(S)6.9地震 GP断层破裂模型 强地面运动 上升时间系数 宽频带地震动模拟
下载PDF
基于脉冲变压器的快前沿固态触发器
7
作者 叶明天 张迎鹏 +1 位作者 龙天骏 王真 《强激光与粒子束》 CAS CSCD 北大核心 2024年第2期22-27,共6页
结合理论求解、仿真分析与实验验证,确定了影响脉冲变压器型触发器输出前沿的主要因素,并研制了一台能可靠触发真空沿面闪络开关导通的快前沿固态触发器。研究结果表明:影响触发器输出脉冲前沿的关键因素为脉冲变压器漏感、匝数比和半... 结合理论求解、仿真分析与实验验证,确定了影响脉冲变压器型触发器输出前沿的主要因素,并研制了一台能可靠触发真空沿面闪络开关导通的快前沿固态触发器。研究结果表明:影响触发器输出脉冲前沿的关键因素为脉冲变压器漏感、匝数比和半导体开关开通速度;不同绕制方式的脉冲变压器漏感差异很大,最小漏感绕法的变压器漏感值低1个数量级;选用开通速度优于15 ns的碳化硅金属氧化物半导体场效应晶体管(SiC MOSFET)、绕制低漏感(小于0.5μH)的脉冲变压器,实现了前沿为20.4 ns(10%~90%)、幅值为16.5 kV的快前沿输出;控制SiC MOSFET的驱动脉宽在35~55 ns变化可以控制触发电流峰值在35~55 A范围内变化。 展开更多
关键词 固态触发源 脉冲变压器 快前沿输出 真空沿面闪络开关
下载PDF
乙醇/甲烷/氢气预混气体爆炸特性研究
8
作者 闫晨朝 王筱蓉 姜根柱 《火工品》 CAS CSCD 北大核心 2024年第2期86-92,共7页
为了进一步了解C_(2)H_(5)OH/CH_(4)/H_(2)预混气体的爆炸特性,在定容燃烧弹内对不同当量比(0.7~1.4)、不同初始温度(370,400,450 K)、不同乙醇掺混比例(20%,50%,80%)的C_(2)H_(5)OH/CH_(4)/H_(2)预混气体的爆炸特性进行实验研究及分析... 为了进一步了解C_(2)H_(5)OH/CH_(4)/H_(2)预混气体的爆炸特性,在定容燃烧弹内对不同当量比(0.7~1.4)、不同初始温度(370,400,450 K)、不同乙醇掺混比例(20%,50%,80%)的C_(2)H_(5)OH/CH_(4)/H_(2)预混气体的爆炸特性进行实验研究及分析。结果表明:爆炸压力峰值与初始温度呈线性负相关,与乙醇掺混比例呈线性正相关;随着当量比的增大,爆炸压力峰值和最大爆炸压力上升速率均呈现先增大后减小的规律,其峰值出现在当量比为1.2或1.3处,而爆炸时间呈现先降低后略有增大的规律;相同初始温度下,随乙醇掺混比例的增大,预混气体放热量增大,在当量比为1.2时达到峰值。 展开更多
关键词 预混气体 乙醇/甲烷/氢气 爆炸特性 爆炸压力 压力上升速率 爆燃指数 爆炸时间
下载PDF
闭环全光纤电流互感器阶跃响应上升时间研究
9
作者 尹保健 王团辉 《电力电子技术》 2024年第3期45-48,共4页
应用于柔性直流输电工程的闭环全光纤电流互感器(FOCT)为满足工程应用,需使用长距离保偏光缆实现偏振光信号的远距离传输,对其阶跃响应上升时间的影响尚未论证。此处从工作原理及输出特性两个方面分析了闭环FOCT采用M阶滑动平均滤波器... 应用于柔性直流输电工程的闭环全光纤电流互感器(FOCT)为满足工程应用,需使用长距离保偏光缆实现偏振光信号的远距离传输,对其阶跃响应上升时间的影响尚未论证。此处从工作原理及输出特性两个方面分析了闭环FOCT采用M阶滑动平均滤波器特性、阶跃响应上升时间,并进行了仿真及试验验证,结果表明:影响阶跃响应上升时间的关键因素为光路渡越时间和滑动平均滤波器阶数,滤波器积分时间与闭环FOCT阶跃响应上升时间正相关;增加300m保偏光缆后闭环FOCT阶跃响应上升时间显著增加,通过控制滑动平均滤波器的积分时间可使闭环FOCT阶跃响应上升时间及测量性能与不增加长距离保偏光缆保持一致,解决了闭环FOCT增加保偏光缆引起阶跃响应上升时间增加的问题,满足柔性直流输电工程对其快速响应及特性稳定的需求。 展开更多
关键词 全光纤电流互感器 阶跃响应上升时间 渡越时间
下载PDF
基于铁氧体传输线的百纳秒脉冲前沿陡化技术研究
10
作者 江进波 翟戎骁 +3 位作者 曹宇 罗正 王佳栋 程廷强 《现代应用物理》 2024年第1期101-109,共9页
基于铁氧体传输线脉冲陡化原理,利用COMSOL软件建立了铁氧体传输线的电磁场仿真模型,研究了脉冲陡化的影响因素及特征规律,根据仿真模型设计了2种不同直径磁芯的铁氧体传输线,并建立了实验测试平台,对传输线陡化后的脉冲前沿进行测试。... 基于铁氧体传输线脉冲陡化原理,利用COMSOL软件建立了铁氧体传输线的电磁场仿真模型,研究了脉冲陡化的影响因素及特征规律,根据仿真模型设计了2种不同直径磁芯的铁氧体传输线,并建立了实验测试平台,对传输线陡化后的脉冲前沿进行测试。仿真及实验结果均表明,铁氧体传输线陡化后的脉冲前沿随输入电压幅值、传输线长度的增加而减小,随磁芯直径的减小而减小,实验结果与仿真结果规律一致。磁芯直径为40 mm,线长为1500 mm的铁氧体传输线可将幅值为120 kV的脉冲电压的前沿由124 ns陡化至14.4 ns,整个脉冲源的抖动为1.83 ns,验证了铁氧体传输线替代FLTD触发器中气体陡化开关的可行性。 展开更多
关键词 铁氧体传输线 高压脉冲陡化 非线性磁导率 快前沿低抖动触发器
下载PDF
噪声对阶跃信号上升时间测量不确定度的影响
11
作者 陈晓松 李峰 李天然 《计测技术》 2024年第1期107-114,共8页
为了更准确地反映阶跃信号上升时间测量过程中可能存在的不确定度来源、提高测量结果的可信度,对噪声引入的阶跃信号上升时间测量不确定度分量开展了数值仿真和试验分析。结果表明,信噪比对上升时间测量不确定度存在显著影响,在信噪比... 为了更准确地反映阶跃信号上升时间测量过程中可能存在的不确定度来源、提高测量结果的可信度,对噪声引入的阶跃信号上升时间测量不确定度分量开展了数值仿真和试验分析。结果表明,信噪比对上升时间测量不确定度存在显著影响,在信噪比较低的情况下,噪声引起的上升时间测量不确定度成为主要来源。通过比较Savitzky-Golay平滑算法和移动平均平滑算法在阶跃信号上升时间计算中的应用效果,发现采用适当的平滑算法可以降低噪声引入的不确定度分量,其中,移动平均平滑算法的效果更好。本研究有助于提高动态信号测量结果的可靠性和准确性,对航空、航天、汽车等领域的动态信号测试不确定度分析具有重要的参考价值。 展开更多
关键词 上升时间 测量不确定度 噪声 阶跃信号 校准 测试方法
下载PDF
珠海某超限高层建筑的性能分析与设计
12
作者 杨坚 杨坤 张汉龙 《建筑结构》 北大核心 2024年第11期24-30,共7页
中葡商贸中心南侧塔楼为B级高度高层建筑,采用钢筋混凝土框架-核心筒结构体系,结构同时存在扭转不规则、楼板不连续、局部穿层柱及斜柱等不规则项。根据结构的超限情况合理选取抗震性能化设计目标,采用PKPM和MIDAS Building两款程序对... 中葡商贸中心南侧塔楼为B级高度高层建筑,采用钢筋混凝土框架-核心筒结构体系,结构同时存在扭转不规则、楼板不连续、局部穿层柱及斜柱等不规则项。根据结构的超限情况合理选取抗震性能化设计目标,采用PKPM和MIDAS Building两款程序对整体结构进行了小震下弹性反应谱和弹性时程分析,补充了中震弹性和不屈服验算,并采用SAUSAGE程序进行了罕遇地震下的弹塑性动力时程分析。针对楼板不连续、局部穿层柱和斜柱等不规则情况还进行了楼板应力分析、屈曲稳定分析以及斜柱转折处的受力分析。根据结构特点采取了相应的加强措施。分析结果表明,各项指标均表现良好,结构各项性能均能达到预定的抗震性能目标,结构体系合理可行。 展开更多
关键词 超限高层 性能设计 时程分析 穿层柱分析
下载PDF
隔震层附加黏滞阻尼器对高层建筑基础隔震结构动力响应影响
13
作者 季超 王延森 +1 位作者 尹保江 狄玉辉 《工程抗震与加固改造》 北大核心 2024年第1期23-27,共5页
隔震层附加黏滞阻尼器对高层基础隔震结构的动力响应影响研究较少。以某地医院15层病房楼为对象,选取隔震层附加黏滞阻尼器前后两种结构,进行三向地震动的弹塑性时程分析。结果表明,隔震层附加黏滞阻尼器后层间剪力增幅可达21.3%;首层... 隔震层附加黏滞阻尼器对高层基础隔震结构的动力响应影响研究较少。以某地医院15层病房楼为对象,选取隔震层附加黏滞阻尼器前后两种结构,进行三向地震动的弹塑性时程分析。结果表明,隔震层附加黏滞阻尼器后层间剪力增幅可达21.3%;首层层间位移角减小15%左右,中上部楼层层间位移角增加约4%左右;隔震层位移减小可达33.6%,可以有效降低隔震支座拉应力,但对压应力影响不明显。 展开更多
关键词 高层建筑 隔震结构 黏滞阻尼器 弹塑性时程 动力响应
下载PDF
某高层剪力墙结构的地震响应分析
14
作者 李永哲 王向英 +1 位作者 张纪刚 张安 《低温建筑技术》 2024年第1期1-4,共4页
为研究高层结构在地震作用下的抗震性能,文中以某15层高层剪力墙结构为主要研究对象,利用ABAQUS有限元软件,构建了有限元模型,并进行模态分析与动力时程研究,通过输入3条8度罕遇强度等级的地震波作用,确定了结构在大地震影响下的震害动... 为研究高层结构在地震作用下的抗震性能,文中以某15层高层剪力墙结构为主要研究对象,利用ABAQUS有限元软件,构建了有限元模型,并进行模态分析与动力时程研究,通过输入3条8度罕遇强度等级的地震波作用,确定了结构在大地震影响下的震害动力响应,得出其最大层间位移角在规范限值以内,结构满足大震不倒的抗震设防要求,以此确定结构的可靠性。 展开更多
关键词 高层结构 ABAQUS模态分析 动力时程分析 地震响应
下载PDF
GIS设备短路电弧效应与压力释放装置设计
15
作者 张凯 史峰涛 +3 位作者 左琪 肖鹤旋 王凯歌 陈利利 《电工技术》 2024年第13期102-104,共3页
分析了GIS设备内部短路电弧造成的问题,介绍了GIS设备异常时气室压力上升和外壳烧穿时间的计算方法,并初步探查了GIS设备壳体的有效防护措施——压力释放装置的合理设计。同时,以某种550kVGIS设备为例,计算短路电弧出现时气室内部压力... 分析了GIS设备内部短路电弧造成的问题,介绍了GIS设备异常时气室压力上升和外壳烧穿时间的计算方法,并初步探查了GIS设备壳体的有效防护措施——压力释放装置的合理设计。同时,以某种550kVGIS设备为例,计算短路电弧出现时气室内部压力变化及壳体烧穿时间,结果表明各气室的壳体设计均满足要求,没有发生壳体烧穿、破裂的可能性。 展开更多
关键词 GIS 短路电弧 烧穿时间 压力上升 合理设计
下载PDF
某高层结构施工阶段模拟分析
16
作者 陈明 程瀛 《广州建筑》 2024年第1期64-66,共3页
为了研究某高层结构各个施工阶段变形情况,共建立8个不同阶段的有限元模型,对其结构进行施工模拟分析。传统模拟荷载加载方式通过一次加载法得到结构变形的响应,分析计算过程较少,计算简单,得到的结果并不能反映结构实际变形特征。本文... 为了研究某高层结构各个施工阶段变形情况,共建立8个不同阶段的有限元模型,对其结构进行施工模拟分析。传统模拟荷载加载方式通过一次加载法得到结构变形的响应,分析计算过程较少,计算简单,得到的结果并不能反映结构实际变形特征。本文采取一次加载法和近似施工过程法,分别对某高层结构各个施工阶段进行施工模拟分析,结果表明:近似施工过程加载法考虑了结构找平措施,结构变形整体呈现鱼腹型规律,结构弹性收缩变形占总变形最小,收缩变形占总变形最大,相对于一次加载法更能反映结构每个施工阶段结构的变形情况,对类似工程施工模拟分析提供借鉴。 展开更多
关键词 高层结构 一次加载法 近似施工过程法 收缩徐变 施工模拟
下载PDF
某大底盘多塔综合体分析及设计研究
17
作者 梁贻尊 《住宅产业》 2024年第4期31-34,55,共5页
广州市某商住广场,是一个由三栋住宅塔楼带五层综合商业裙楼大底盘组成的商住综合体项目。该项目分别对多塔模型及单塔模型进行抗震分析,研究大底盘多塔结构的地震反应及相互影响特点。经对比发现大底盘屋面以上的塔楼地震剪力有一定程... 广州市某商住广场,是一个由三栋住宅塔楼带五层综合商业裙楼大底盘组成的商住综合体项目。该项目分别对多塔模型及单塔模型进行抗震分析,研究大底盘多塔结构的地震反应及相互影响特点。经对比发现大底盘屋面以上的塔楼地震剪力有一定程度的增大,其增大系数大小与塔楼距离、裙楼高度、结构刚度等多种因素有关。同时,通过动力弹塑性和性能设计分析,对大底盘、框支框架、底部加强区等薄弱构件采取有效的加强措施。 展开更多
关键词 大底盘 高位转换 弹性时程分析 动力弹塑性分析 塔楼偏置 性能设计
下载PDF
高层装配式建筑环氧树脂防水胶耐高温性能试验分析
18
作者 黄小星 彭忠培 王昊 《粘接》 CAS 2024年第1期5-8,共4页
为了提升高层装配式建筑环氧树脂防水胶的耐腐蚀性与粘接强度,降低固化收缩率,对高层装配式建筑环氧树脂防水胶进行耐高温性能试验分析。采用分数阶微积分理论的方法构建环氧树脂粘弹性流变本构模型,在时间-温度等效原理的基础上,分析... 为了提升高层装配式建筑环氧树脂防水胶的耐腐蚀性与粘接强度,降低固化收缩率,对高层装配式建筑环氧树脂防水胶进行耐高温性能试验分析。采用分数阶微积分理论的方法构建环氧树脂粘弹性流变本构模型,在时间-温度等效原理的基础上,分析环氧树脂分子链活性和速度情况。环氧树脂防水胶力学性能测试结果表明,温度升高时环氧树脂防水胶的拉伸强度下降,断裂伸长率上升,拉伸弹模减小,拉伸蠕变提高、拉伸剪切强度降低。温度对环氧树脂防水胶具有一定的影响,其耐高温性能越好,实用效果越强。 展开更多
关键词 高层装配式建筑 环氧树脂 防水胶 时间-等效原理 耐高温性能
下载PDF
高层装配整体式剪力墙结构动力弹塑性时程分析
19
作者 储晓路 胡敏 《水利与建筑工程学报》 2024年第2期102-107,共6页
为了研究某高层建筑的抗震性能,对高层装配整体式剪力墙结构动力弹塑性时程进行分析。利用ABAQUS有限元软件,构建高层装配整体式剪力墙结构动力弹塑性材料本构关系有限元模型,模拟地震作用下高层装配整体式剪力墙结构动力时程变化情况... 为了研究某高层建筑的抗震性能,对高层装配整体式剪力墙结构动力弹塑性时程进行分析。利用ABAQUS有限元软件,构建高层装配整体式剪力墙结构动力弹塑性材料本构关系有限元模型,模拟地震作用下高层装配整体式剪力墙结构动力时程变化情况。分析结果表明:整体剪力墙结构前6阶振型每两阶平动振型出现一个扭转,且计算结果符合规定,测试剪力墙时程位移变化结构也符合相关规定。随着地震波加载时间的增长,高层装配整体式剪力墙结构受拉损伤逐渐严重。加载至40s时,该结构的混凝土材料已经不能发挥作用,只能依靠钢筋支撑,但未出现明显坍塌,剪力墙结构受压损伤主要出现在剪力墙结构的连接位置,未出现明显受压损伤。说明该高层装配整体式剪力墙结构抗震性能良好。 展开更多
关键词 高层装配 整体式 剪力墙结构 动力弹塑性 时程分析 ABAQUS有限元
下载PDF
Effect of pulse voltage rising time on discharge characteristics of a helium-air plasma at atmospheric pressure 被引量:1
20
作者 钱沐杨 李桂 +4 位作者 刘三秋 张羽 李杉 林泽斌 王德真 《Plasma Science and Technology》 SCIE EI CAS CSCD 2017年第6期102-107,共6页
In this paper,the influence of voltage rising time on a pulsed-dc helium-air plasma at atmospheric pressure is numerically simulated.Simulation results show that as the voltage rising time increases from 10 ns to 30 n... In this paper,the influence of voltage rising time on a pulsed-dc helium-air plasma at atmospheric pressure is numerically simulated.Simulation results show that as the voltage rising time increases from 10 ns to 30 ns,there is a decrease in the discharge current,namely 0.052 A when the voltage rising time is 10 ns and 0.038 A when the voltage rising time is 30 ns.Additionally,a shorter voltage rising time results in a faster breakdown,a more rapidly rising current waveform,and a higher breakdown voltage.Furthermore,the basic parameters of the streamer discharge also increase with voltage rise rate,which is ascribed to the fact that more energetic electrons are produced in a shorter voltage rising time.Therefore,a pulsed-dc voltage with a short rising time is desirable for efficient production of nonequilibrium atmospheric pressure plasma discharge. 展开更多
关键词 atmospheric pressure plasma discharge voltage rising time numerical simulation
下载PDF
上一页 1 2 58 下一页 到第
使用帮助 返回顶部