This paper describes the robust optimum design which combines the geometrical optimization method proposed by Hashimoto and statistical method. Recently, 2.5″ hard disk drives (HDDs) are widely used for mobile device...This paper describes the robust optimum design which combines the geometrical optimization method proposed by Hashimoto and statistical method. Recently, 2.5″ hard disk drives (HDDs) are widely used for mobile devices such as laptops, video cameras and car navigation systems. In mobile applications, high durability towards external vibrations and shocks are essentials to the bearings of HDD spindle motor. In addition, the bearing characteristics are influenced by manufacturing error because of small size of the bearings of HDD. In this paper, the geometrical optimization is carried out to maximize the bearing stiffness using sequential quadratic programming to improve vibration characteristics. Additionally, the bearing stiffness is analyzed considering dimensional tolerance of the bearing using statistical method. The dimensional tolerance is assumed to distribute according to the Gaussian distribution, and then the bearing stiffness is estimated by combining the expectation and standard deviation. As a result, in the robust optimum design, new groove geometry of bearing can be obtained in which the bearing stiffness is four times higher than the stiffness of conventional spiral groove bearing. Moreover, the bearing has lower variability compared with the result of optimum design neglecting dimensional tolerance.展开更多
A last-ply failure (LPF) analysis method for laminated composite plates is incorpo- rated into the ?nite element code-ANSYS, and a robust optimum design method is presented. The composite structure is analyzed...A last-ply failure (LPF) analysis method for laminated composite plates is incorpo- rated into the ?nite element code-ANSYS, and a robust optimum design method is presented. The composite structure is analyzed by considering both in-plane and out-of-plane loads. For a lamina, two major failure modes are considered: matrix failure and ?ber breakage that are characterized by the proper strength criteria in the literature. When a lamina has failed, the laminate sti?ness is modi?ed to re?ect the damage, and stresses in the structure are re-analyzed. This procedure is repeatedly performed until the whole structure fails and thus the ultimate strength is determined. A structural optimization problem is solved with the ?ber orientation and the lamina thickness as the design variables and the LPF load as the objective. Finally, the robust optimum design method for laminates is presented and discussed.展开更多
The experimental processes are difficult to model by physical laws, because a multitude of factors can intervene simultaneously and are responsible for their instabilities and their random variations. Two types of fac...The experimental processes are difficult to model by physical laws, because a multitude of factors can intervene simultaneously and are responsible for their instabilities and their random variations. Two types of factors are to be considered;those that are easy to manipulate according to the objectives, and those that can vary randomly (uncontrollable factors). These could eventually divert the system from the desired target. It is, therefore, important to implement a system that is insensitive to fluctuations in factors that are difficult to control. The aim of this study is to optimize the synthesis of an apatitic calcium carbonate phosphate characterized with a Ca/P ratio equal to 1.61 by using the experimental design method based on the Taguchi method. In this process, five factors are considered and must be configured to achieve the previously defined objective. The temperature is a very important factor in the process, but difficult to control experimentally, so considered to be a problem factor (noise factor), forcing us to build a robust system that is insensitive to the last one. Therefore, a much simpler model to study the robustness of a synthetic solution with respect to temperature is developed. We have tried to parameterize all the factors considered in the process within a wide interval of temperature variation (60˚C - 90˚C). Temperature changes are no longer considered as a problem for apatitic calcium carbonate phosphate synthesis. In this finding, the proposed mathematical model is linear and efficient with very satisfactory statistical indicators. In addition, several simple solutions for the synthesis of carbonate phosphate are proposed with a Ca/P ratio equal to 1.61.展开更多
文摘This paper describes the robust optimum design which combines the geometrical optimization method proposed by Hashimoto and statistical method. Recently, 2.5″ hard disk drives (HDDs) are widely used for mobile devices such as laptops, video cameras and car navigation systems. In mobile applications, high durability towards external vibrations and shocks are essentials to the bearings of HDD spindle motor. In addition, the bearing characteristics are influenced by manufacturing error because of small size of the bearings of HDD. In this paper, the geometrical optimization is carried out to maximize the bearing stiffness using sequential quadratic programming to improve vibration characteristics. Additionally, the bearing stiffness is analyzed considering dimensional tolerance of the bearing using statistical method. The dimensional tolerance is assumed to distribute according to the Gaussian distribution, and then the bearing stiffness is estimated by combining the expectation and standard deviation. As a result, in the robust optimum design, new groove geometry of bearing can be obtained in which the bearing stiffness is four times higher than the stiffness of conventional spiral groove bearing. Moreover, the bearing has lower variability compared with the result of optimum design neglecting dimensional tolerance.
基金Project supported by the National Natural Science Foundation of China (No.10272049).
文摘A last-ply failure (LPF) analysis method for laminated composite plates is incorpo- rated into the ?nite element code-ANSYS, and a robust optimum design method is presented. The composite structure is analyzed by considering both in-plane and out-of-plane loads. For a lamina, two major failure modes are considered: matrix failure and ?ber breakage that are characterized by the proper strength criteria in the literature. When a lamina has failed, the laminate sti?ness is modi?ed to re?ect the damage, and stresses in the structure are re-analyzed. This procedure is repeatedly performed until the whole structure fails and thus the ultimate strength is determined. A structural optimization problem is solved with the ?ber orientation and the lamina thickness as the design variables and the LPF load as the objective. Finally, the robust optimum design method for laminates is presented and discussed.
文摘The experimental processes are difficult to model by physical laws, because a multitude of factors can intervene simultaneously and are responsible for their instabilities and their random variations. Two types of factors are to be considered;those that are easy to manipulate according to the objectives, and those that can vary randomly (uncontrollable factors). These could eventually divert the system from the desired target. It is, therefore, important to implement a system that is insensitive to fluctuations in factors that are difficult to control. The aim of this study is to optimize the synthesis of an apatitic calcium carbonate phosphate characterized with a Ca/P ratio equal to 1.61 by using the experimental design method based on the Taguchi method. In this process, five factors are considered and must be configured to achieve the previously defined objective. The temperature is a very important factor in the process, but difficult to control experimentally, so considered to be a problem factor (noise factor), forcing us to build a robust system that is insensitive to the last one. Therefore, a much simpler model to study the robustness of a synthetic solution with respect to temperature is developed. We have tried to parameterize all the factors considered in the process within a wide interval of temperature variation (60˚C - 90˚C). Temperature changes are no longer considered as a problem for apatitic calcium carbonate phosphate synthesis. In this finding, the proposed mathematical model is linear and efficient with very satisfactory statistical indicators. In addition, several simple solutions for the synthesis of carbonate phosphate are proposed with a Ca/P ratio equal to 1.61.
