Failure Mechanisms of Post-Earthquake Bedrock Landslides in Response to Rainfall Infiltration

Among the triggering factors of postearthquake bedrock landslides, rainfall plays an important role. However, with slope variation, the mechanism of its effects on the failure of rock landslides is not dear. Here, from the viewpoint of fracture mechanics, and based on post-earthquake conditions, the mechanisms of crack propagation, water infiltration and development of the sliding surface were investigated. Then, according to the upper boundary theorem, the effects of water infiltrated into fractures on the stability of rock slopes were analyzed quantitatively. Finally, an example is presented to verify the theory. The results show that the propagation and coalescence of cracks and the lubrication of incipient sliding surfaces are the main causes of the failure of post-earthquake rock landslides in response to rainfall.

Failure mechanism and simulation for long run-out of the catastrophic rock landslide in the Shanyang Vanadium Mine,China

On 12th August 2015,a massive rapid long run-out rock landslide occurred in the Shanyang Vanadium Mine in Shaanxi Province,China,which claimed the lives of 65 miners.No heavy rainfalls,earthquakes,and mining blasts were recorded before the incident.Therefore,the failure mechanism and the cause of the long run-out movement are always in arguments.In this paper,we conducted a detailed field investigation,laboratory tests,block theory analysis,and numerical simulation to investigate the failure and long run-out mechanisms of the landslide.The field investigation results show that the source material of the rock landslide is a huge dolomite wedge block bedding on siliceous shale layers.Uniaxial compression tests indicate that the uniaxial compression strength of the intact dolomite is 130-140MPa and the dolomite shows a brittle failure mode.Due to the progressive downward erosion of the gully,the dolomite rock bridge at the slope toe became thinner.As the compression stress in the dolomite bridge increased to surpass its strength,the brittle failure of the bridge occurred.Then huge potential energy was released following the disintegration of the landslide,which led to the high acceleration of this rock landslide.The 3D discrete element simulation results suggest that the low intergranular friction contributes to the long run-out movement of this rock landslide.

Mechanism of action of cracks water on rock landslide in rainfall

In worldwide, the most common triggering factor of rock landslides is extended and intense rainfall. However, different from the soil slope failure caused by softening action of infiltration rainwater, the mechanism of rock landslide in rainfall is not clear. From the view of fracture mechanics, the propagation of cracks on rock slope and the development of sliding surface were researched. Then based on hydraulics formulas and using Sweden arc method, the influence of crack water on stability of rock slope was quantitatively studied. Finally, an example was given to check the theoretical approach. The result shows that the development of sliding surface of rock slope is mainly caused by crack propagation under hydrostatic pressure when the stress intensity factor KI at crack tip is bigger than the toughness index of rock fractures Klc, and the failure of slope is the result of hydraulic action of crack water and the softening of materials on sliding surface when the depth of crack water is bigger than a minimum value hmin.

Large-scale Rock Landslide Slip Surface Location Analysis and Strength Parameters Evaluation

Large-scale rock landslides have huge impacts on various large-scale rock engineering and project operations. They are also important aspects evaluating geological disasters. In the initial evaluations on the stability of large-scale rock landslides, in most cases, it is difficult to conduct evaluation or to have accurate evaluations because most of large-scale rock landslides are huge in size, high in slopes, and located in the canyon of mountains, which makes the exploration very difficult and thus hard to get credible data on slip surface form, location, depth and strength. This paper describes the Badi landslide happened along the Lancang River, and systematically introduces methods to analyze and verify large-scale slip surface form using terrain conditions surrounding the large-scale landslide, shape of the slide walls, and development patterns of streams and gully. This paper also introduces ways to obtain strength parameters of slip surface with the soil in the slide zone by using the principles of stress state, principles of gravity compaction, structure regeneration and strength regeneration. It is confirmed that analyzed results to the slip surface are basically consistent with the exploration results. The methods introduced here have been successfully applied to evaluate the stability of Badi large-scale rock landslide and have been applied in engineering practices.

Optimal mining sequence for coal faces under a bedding slope:insight from landslide prevention

Repetitive mining beneath bedding slopes is identified as a critical factor in geomorphic disturbances, especially landslides and surface subsidence. Prior research has largely concentrated on surface deformation in plains due to multi-seam coal mining and the instability of natural bedding slopes, yet the cumulative impact of different mining sequences on bedding slopes has been less explored. This study combines drone surveys and geological data to construct a comprehensive three-dimensional model of bedding slopes. Utilizing FLAC3D and PFC2D models, derived from laboratory experiments, it simulates stress, deformation, and failure dynamics of slopes under various mining sequences. Incorporating fractal dimension analysis, the research evaluates the stability of slopes in relation to different mining sequences. The findings reveal that mining in an upslope direction minimizes disruption to overlying strata. Initiating extraction from lower segments increases tensile-shear stress in coal pillar overburdens, resulting in greater creep deformation towards the downslope than when starting from upper segments, potentially leading to localized landslides and widespread creep deformation in mined-out areas. The downslope upward mining sequence exhibits the least fractal dimensions, indicating minimal disturbance to both strata and surface. While all five mining scenarios maintain good slope stability under normal conditions, recalibrated stability assessments based on fractal dimensions suggest that downslope upward mining offers the highest stability under rainfall, contrasting with the lower stability and potential instability risks of upslope downward mining. These insights are pivotal for mining operations and geological hazard mitigation in multi-seam coal exploitation on bedding slopes.

Characteristics and triggering mechanism of Xinmo landslide on 24 June 2017 in Sichuan, China

At 5: 39 AM on 24 June 2017, a huge landslide-debris avalanche occurred on Fugui Mountain at Xinmo village, Diexi town, Maoxian county, Sichuan province, China. The debris blocked the Songpinggou River for about 2 km, resulting in a heavy loss of both human lives and properties(10 deaths, 3 injuries, 73 missing, and 103 houses completely destroyed). The objectives of this paper are to understand the overall process and triggering factors of this landslide and to explore the affecting factors for its long term evolution before failure. Post event surveys were carried out the day after the landslide occurrence. Information was gathered from literature and on-site investigation and measurement. Topography, landforms, lithology, geological setting, earthquake history, meteorological and hydrological data of the area were analysed. Aerial photographs and other remote sensing information were used for evaluation and discussion. Eye witnesses also provided a lot of helpful information for us to understand the process of initiation, development and deposition. The depositional characteristics of the moving material as well as the traces of the movement,the structural features of the main scarp and the seismic waves induced by the slide are presented and discussed in detail in this paper. The results show that the mechanism of the landslide is a sudden rupture of the main block caused by the instability of a secondary block at a higher position. After the initiation, the failed rock mass at higher position overloaded the main block at the lower elevation and collapsed in tandem. Fragmentation of the rock mass occurred later, thus forming a debris avalanche with high mobility. This landslide case indicates that such seismic events could influence geological hazards for over 80 years and this study provides reference to the long term susceptibility and risk assessment of secondary geological hazards from earthquake.

SOME FEATURES OF MUD ROCK FLOW AND LANDSLIDE CAUSED BY STORM RAINFALL IN CHINA

Storm rainfall and severe storm rainfall can directly cause flood, and usually cause a series of secondary disasters. In mountain areas, the abrupt mud rock flow and landslide disasters motivated by storm rainfall are especially serious. So, it is negligible content to pay more attention and strengthen the study of storm rainfall secondary disasters in studying storm rainfall disaster.In the National Key Project 85-906-09,we have developed these aspects’studies, which not be ignored by some relevant sections