Efficient coherent detection of maneuvering targets based on location rotation transform and non-uniform fast Fourier transform

Long-term coherent integration can remarkably improve the ability of detection and motion parameter estimation of radar for maneuvering targets.However,the linear range migration,quadratic range migration(QRM),and Doppler frequency migration within the coherent processing interval seriously degrade the detection and estimation performance.Therefore,an efficient and noise-resistant coherent integration method based on location rotation transform(LRT)and non-uniform fast Fourier transform(NuFFT)is proposed.QRM is corrected by the second-order keystone transform.Using the relationship between the rotation angle and Doppler frequency,a novel phase compensation function is constructed.Motion parameters can be rapidly estimated by LRT and NuFFT.Compared with several representative algorithms,the proposed method achieves a nearly ideal detection performance with low computational cost.Finally,experiments based on measured radar data are conducted to verify the proposed algorithm.

Scale effect removal and range migration correction for hypersonic target coherent detection

The detection of hypersonic targets usually confronts range migration(RM)issue before coherent integration(CI).The traditional methods aiming at correcting RM to obtain CI mainly considers the narrow-band radar condition.However,with the increasing requirement of far-range detection,the time bandwidth product,which is corresponding to radar’s mean power,should be promoted in actual application.Thus,the echo signal generates the scale effect(SE)at large time bandwidth product situation,influencing the intra and inter pulse integration performance.To eliminate SE and correct RM,this paper proposes an effective algorithm,i.e.,scaled location rotation transform(ScLRT).The ScLRT can remove SE to obtain the matching pulse compression(PC)as well as correct RM to complete CI via the location rotation transform,being implemented by seeking the actual rotation angle.Compared to the traditional coherent detection algorithms,Sc LRT can address the SE problem to achieve better detection/estimation capabilities.At last,this paper gives several simulations to assess the viability of ScLRT.

用于旋转对称三角传感器的一种鲁棒的处理方法(英文)

旋转对称三角传感器由于其光学系统的旋转对称性而比其他的传统激光三角传感器具有更好的柔性,将旋转对称三角传感器应用于工业领域,相应的处理方法的性能是至关重要的。为了使传感器在复杂物体表面情况下仍具有较好的性能,我们设计了一种用于旋转对称三角传感器的鲁棒的处理方法。首先,分析旋转对称三角传感器图像的特性,这些特性取决于被测物体的表面特性,而这些图像特性将有助于传感器图像的处理方法的设计。其次,用一种由粗到精检测方法实现对传感器图像的处理。提出在精检测中,一种结合了自适应平滑和峰值法的方法,以实现检测的鲁棒性。在实际传感器图像上的实验结果证明,这种处理方法对于来自复杂表面的传感器图像具有很好的鲁棒性,从而提高了传感器的柔性。

风力发电机旋转样本谱及疲劳寿命预测

为了考虑桨叶旋转效应,准确进行风力发电机疲劳寿命预测,提出了基于旋转样本谱的风力发电机疲劳寿命预测模型.借助Fourier变换,推导了考虑旋转效应的旋转样本谱,并与Von Karman谱(一种固定点紊流风谱)进行比较.在旋转样本谱的基础上,提出了源于Palmgren-Miner线性损伤准则的风力发电机疲劳寿命预测模型,并以1.25MW风力发电机为例进行疲劳寿命分析.结果表明,与固定点紊流风谱相比,旋转样本谱的能量分布发生了根本变化,其能量由低频向高频移动,在高频段曲线会出现多峰情况;基于旋转样本谱的疲劳寿命分析更接近实际情况,而基于Von Karman谱进行风力发电机疲劳寿命预测不够精确,且偏于不安全.

关于旋转周期结构计算的注记

基于离散 Fourier变换 ,在解析方程的层次上将旋转周期结构的问题化为若干个关于局部结构的问题 。

旋转对称结构制动盘模态相关性分析

为了消除具有旋转对称特性的制动盘重根模态对模态相关性Cross MAC值计算带来的误差,进行了制动盘的试验模态分析和有限元模态分析,提取相应的模态参数,在此基础上采用巡回群和初等旋转变换重置模态振型矢量。重置后的试验模态与有限元模态的前9阶Cross MAC值均接近1,准确的反映了二者之间的相关程度。表明巡回群和初等旋转变换二种方法对改善旋转对称结构的模态振型相关分析都是行之有效的。

基于小波变换的2D形状分析

提出一种以小波变换为基础，可以对２Ｄ形状进行旋转对称性检测、边缘轮廓的角点位置确定，并使方向规则化的分析方法。该方法的特点是：方便、准确。

3D Reconstruction and Animation of Brain MRI Images Based on Matlab

The following algorithms are proposed and realized by MATLAB programming based on the brain MRI images:(1)The 3D surface of the brain is reconstructed using MC algorithm.(2)A rotate animation of the brain is created and displayed by 3D rotate transformation and animation functions of Matlab.Result shows that the algorithm can show the brain accurately and quickly,takes up less space in memory.

Research on Open-circuit Fault Tolerant Control of Six-phase Permanent Magnet Synchronous Machine Based on Fifth Harmonic Current Injection

This paper proposes a novel control approach for fault-tolerant control of dual three-phase permanent magnet synchronous motor(PMSM) under one-phase open-circuit fault.A modified six-phase static coordinate transformation matrix and an extended rotating coordinate transformation matrix are investigated considering the influence of the fifth harmonic space on fault-tolerant control. These mathematical models are further analyzed in the fundamental space and the fifth harmonic space after the fault and to eliminate the coupling between the d-q axis voltage equation in the fundamental wave space and the d-q axis voltage equation in the fifth harmonic space, a secondary rotation coordinate transformation matrix is proposed. To achieve the purpose of reducing torque ripple, the fault-tolerant control method proposed in this paper not only takes the minimum copper loss as the constraint condition, but also injects the fifth harmonic current. The experimental result of current and torque is used to verify the accuracy of fault-tolerant control.

Atmospheric Excitation of Time Variable Length-of-Day on Seasonal Scales

We use the method of wavelet transform to analyze the time series of the Earth＇s rotation rate of the EOP （IERS） C04. The result shows that the seasonal （annual and semiannual） variation of the length-of-day （LOD） has temporal variability in its period length and amplitude. During 1965.0-2001.0, the periods of the semiannual and annual components varied mainly from 175-day to 190-day and from 360-day to 370-day, respectively; while their amplitudes varied by more than 0.2 ms and 0.1 ms, respectively. Analyzing the axial component of atmospheric angular momentum （AAM） during this period, we have found that time-variations of period lengths and amplitudes also exist in the seasonal oscillations of the axial AAM and are in good consistency with those of the seasonal LOD change. The time variation of the axial AAM can explain largely the change of the LOD on seasonal scales.

A brief review of the development and optimization of the three-dimensional magnetic configuration system in the J-TEXT tokamak

The three-dimensional(3D) magnetic configuration system in the J-TEXT tokamak has featured in many experimental studies.The system mainly consists of three subsystems:the static resonant magnetic perturbation(SRMP) system,the dynamic resonant magnetic perturbation(DRMP) system and the helical coil system.The SRMP coil system consist of two kinds of coils,i.e.three six-loop coils and two five-loop coils.It can suppress tearing modes with a moderate strength,and may also cause mode locking with larger amplitude.The DRMP coil system consists of 12 single-turn saddle coils(DRMP1) and 12 double-turn saddle coils(DRMP2).Its magnetic field can be rotated at a few kHz,leading to either acceleration or deceleration of the tearing mode velocity and the plasma rotation.The helical coil system consists of two closed coils,and is currently under construction to provide external rotational transform in J-TEXT.The 3D magnetic configuration system can suppress tearing modes,preventing and avoiding the occurrence of major disruption.

Orthogonal transformation operation theorem of a spatial universal uniform rotating magnetic field and its application in capsule endoscopy

According to the anti-phase sine current superposition theorem, the orientation, the magnetic flux density, the angular speed and the rotational direction of the spatial universal rotating magnetic field (SURMF) can be controlled within the tri-axial orthogonal square Helmholtz coils (TOSHC). Nevertheless, three coupling direction angles of the normal vector of the SURMF in the Descartes coordinate system cannot be separately controlled, thus the adjustment of the orientation of the SURMF is difficult and the flexibility of the robotic posture control is restricted. For the dimension reduction and the decoupling of control variables, the orthogonal transformation operation theorem of the SURMF is proposed based on two independent rotation angular variables, which employs azimuth and altitude angles as two variables of the three-phase sine current superposition formula derived by the orthogonal rotation inverse transformation. Then the unique control rules of the orientation and the rotational direction of the SURMF are generalized in each spatial quadrant, thus the scanning of the normal vector of the SURMF along the horizontal or vertical direction can be achieved through changing only one variable, which simplifies the control process of the orientation of the SURMF greatly. To validate its feasibility and maneuverability, experiments were conducted in the animal intestine utilizing the innovative dual hemisphere capsule robot (DHCR) with active and passive modes. It was demonstrated that the posture adjustment and the steering rolling locomotion of the DHCR can be realized through single variable control, thus the orthogonal transformation operation theorem makes the control of the orientation of the SURMF convenient and flexible significantly. This breakthrough will lay a foundation for the human-machine interaction control of the SURMF.

Method for Workspace Calculation of 6R Serial Manipulator Based on Surface Enveloping and Overlaying

Aiming at the workspace calculation problem of multi-joint serial manipulators,a surface enveloping and overlaying (SEO) method is presented to identify and visualize the manipulator workspace.The SEO method is composed of two stages:the first stage is to choose reference points of the manipulator and calculate their boundary surfaces using the nth enveloping method;the second stage is to overlay these boundary surfaces to identify the final workspace.The SEO method is basically a combination of the analytic method and the numerical method.By delineating the graphic representation of the workspace step by step,the SEO method is easy to analyze the existence and the shape of voids and holes.The basic theory of the SEO method and formulas for workspace calculation are presented based on a 6R serial manipulator.By showing the workspace calculation results,the SEO method is proved working correctly.

New Wavelet Theory and Application in Nondestructive Testing

A new ultrasound signal processing model that provides fast real-time performance was devel- oped. The model is based on the “rotation angle series fast wavelet transform” algorithm developed for real- time digital signal processing. Instead of the traditional convolution-based algorithms, the algorithm uses a cascaded structure which can be quickly implemented on digital signal processors. The algorithm runs twice as fast as and is more flexible than the fast wavelet transform, and is applicable for multi-channel and phased array ultrasound systems. By using this algorithm, multi-channel ultrasound systems, including phased array ultrasound systems can have less complex software and hardware designs, lower cost, smaller size, and especially more powerful functions.